From 0cd4d4512abfa3b49f0689373c9f50462092c503 Mon Sep 17 00:00:00 2001 From: Daniel Spindelbauer Date: Fri, 24 Aug 2018 11:17:58 +0000 Subject: [PATCH] GitBook: [development_release] 11 pages modified --- README.md | 6 ++++++ datasheets/development/fipy.md | 2 +- datasheets/development/gpy.md | 4 ++-- datasheets/development/lopy.md | 2 +- datasheets/development/lopy4.md | 2 +- datasheets/development/sipy.md | 2 +- datasheets/development/wipy2.md | 4 ++-- datasheets/development/wipy3.md | 2 +- gettingstarted/connection/lopy.md | 4 ++-- gettingstarted/connection/lopy4.md | 2 +- pytrackpysense/installation/drivers.md | 2 +- 11 files changed, 19 insertions(+), 13 deletions(-) diff --git a/README.md b/README.md index 0c35b96..5a5255b 100644 --- a/README.md +++ b/README.md @@ -11,3 +11,9 @@ To get started, read through the Getting Started Guide then feel free to jump st * [API Documentation](firmwareapi/introduction.md) * [Pybytes](pybytes/introduction.md) +{% hint style="info" %} +If you've been redirected here from a link, check if it contains `/chapter`. If yes, by removing that part, you'll get to the correct page. We have migrated our documentation which has changed the path of the pages. +{% endhint %} + + + diff --git a/datasheets/development/fipy.md b/datasheets/development/fipy.md index b925254..b8d3ecf 100644 --- a/datasheets/development/fipy.md +++ b/datasheets/development/fipy.md @@ -4,7 +4,7 @@ **Store**: [Buy Here](http://www.pycom.io/fipy) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/fipy.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/fipy.md) ## Pinout diff --git a/datasheets/development/gpy.md b/datasheets/development/gpy.md index 53f4fa6..aa09c18 100644 --- a/datasheets/development/gpy.md +++ b/datasheets/development/gpy.md @@ -4,7 +4,7 @@ **Store**: [Buy Here](http://www.pycom.io/gpy) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/gpy.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/gpy.md) ## Pinout @@ -42,7 +42,7 @@ The `Vin` pin on the GPy can be supplied with a voltage ranging from `3.5v` to ` ### AT Commands -The AT commands for the Sequans Monarch modem on the GPy are available in a [PDF file](https://docs.pycom.io/chapter/datasheets/downloads/Monarch_4G-EZ_LR5110_ATCommands_ReferenceManual_Rev3_NOCONFIDENTIAL.pdf). +The AT commands for the Sequans Monarch modem on the GPy are available in a PDF file. {% file src="../../.gitbook/assets/monarch\_4g-ez\_lr5110\_atcommands\_referencemanual\_rev3\_noconfidential-1.pdf" caption="AT Commands for Sequans" %} diff --git a/datasheets/development/lopy.md b/datasheets/development/lopy.md index 7912b46..8d3cbcb 100644 --- a/datasheets/development/lopy.md +++ b/datasheets/development/lopy.md @@ -4,7 +4,7 @@ **Store**: [Buy Here](http://www.pycom.io/lopy) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/lopy.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/lopy.md) ## Pinout diff --git a/datasheets/development/lopy4.md b/datasheets/development/lopy4.md index ee1ae40..46bfb7d 100644 --- a/datasheets/development/lopy4.md +++ b/datasheets/development/lopy4.md @@ -4,7 +4,7 @@ **Store**: [Buy Here](http://www.pycom.io/lopy4) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/lopy4.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/lopy4.md) ## Pinout diff --git a/datasheets/development/sipy.md b/datasheets/development/sipy.md index 7f161ec..c9817a7 100644 --- a/datasheets/development/sipy.md +++ b/datasheets/development/sipy.md @@ -4,7 +4,7 @@ **Store**: [Buy Here](http://www.pycom.io/sipy) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/sipy.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/sipy.md) ## Pinout diff --git a/datasheets/development/wipy2.md b/datasheets/development/wipy2.md index 1da6a1a..e818e05 100644 --- a/datasheets/development/wipy2.md +++ b/datasheets/development/wipy2.md @@ -2,9 +2,9 @@ ![](../../.gitbook/assets/wipy2-1.png) -**Store**: Discontinued, See [WiPy3](https://docs.pycom.io/chapter/datasheets/development/wipy3.html) +**Store**: Discontinued, See [WiPy3](wipy3.md) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/wipy.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/wipy.md) ## Pinout diff --git a/datasheets/development/wipy3.md b/datasheets/development/wipy3.md index 3e0f10f..aad4d97 100644 --- a/datasheets/development/wipy3.md +++ b/datasheets/development/wipy3.md @@ -4,7 +4,7 @@ **Store**: [Buy Here](http://www.pycom.io/wipy-3) -**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/wipy.html) +**Getting Started:** [Click Here](../../gettingstarted/connection/wipy.md) ## Pinout diff --git a/gettingstarted/connection/lopy.md b/gettingstarted/connection/lopy.md index 00b70d6..5e6cd79 100644 --- a/gettingstarted/connection/lopy.md +++ b/gettingstarted/connection/lopy.md @@ -12,7 +12,7 @@ {% endtab %} {% tab title="Exp Board 3.0" %} -* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](https://pycom.gitbook.io/dan-sbook/pytrack-pysense-pyscan/installation/firmware). +* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md). * Look for the reset button on the module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the expansion board. * Insert the LoPy module on the Expansion Board with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. @@ -21,7 +21,7 @@ {% endtab %} {% tab title="Pytrack/Pysense/Pyscan" %} -* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](https://pycom.gitbook.io/dan-sbook/pytrack-pysense-pyscan/installation/firmware). +* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md). * Look for the reset button on the LoPy module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. * Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. diff --git a/gettingstarted/connection/lopy4.md b/gettingstarted/connection/lopy4.md index 6f19e8d..d605442 100644 --- a/gettingstarted/connection/lopy4.md +++ b/gettingstarted/connection/lopy4.md @@ -80,7 +80,7 @@ If you intend on using the LoRa/Sigfox connectivity of the LoPy4 you **must** co ### WiFi/Bluetooth \(optional\) -All Pycom modules, including the LoPy4, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy4 in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](https://docs.pycom.io/chapter/firmwareapi/pycom/network/wlan.html) +All Pycom modules, including the LoPy4, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy4 in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md) ![](../../.gitbook/assets/wifi_pigtail_ant_lopy4.png) diff --git a/pytrackpysense/installation/drivers.md b/pytrackpysense/installation/drivers.md index e0cb051..e1bfbfe 100644 --- a/pytrackpysense/installation/drivers.md +++ b/pytrackpysense/installation/drivers.md @@ -8,7 +8,7 @@ Please follow the instructions below to install the required drivers. Please download the driver software from the link below. -[Pytrack/Pysense/Pyscan/Expansion board 3 Driver](https://github.com/pycom/pycom-docs/tree/37661883902849b1a931ee273a23ae8e0f3d773e/chapter/pytrackpysense/installation/pycom.inf) +[Pytrack/Pysense/Pyscan/Expansion Board 3 Driver](https://github.com/pycom/pycom-documentation/blob/master/pytrackpysense/installation/pycom.inf) ## Installation