diff --git a/content/datasheets/development/fipy.md b/content/datasheets/development/fipy.md index f6973f8..f82a82a 100644 --- a/content/datasheets/development/fipy.md +++ b/content/datasheets/development/fipy.md @@ -9,7 +9,7 @@ aliases: ![](/gitbook/assets/fipy-1.png) -> Note: Orient the RGB LED / reset button over the USB connector on any expansion board +> Note: Orient the RGB LED / reset button over the USB connector on any expansion board @@ -25,7 +25,7 @@ The datasheet of the FiPy is available as a [PDF File](/gitbook/assets/specsheet The drawing of the LTE-M antenna is available as a [PDF File](/gitbook/assets/lte-m-antenna-drawing.pdf). The Fipy is certified for [CE RED](/gitbook/assets/fipy_c03-b0-red-final.pdf) and [FCC DSS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dts.pdf) [FCC DXX](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dxx.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-tnb.pdf) -[RCM](/gitbook/assets/RCM-Fipy.pdf) +[RCM](/gitbook/assets/RCM-FIPY.zip) [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-FiPy(8217-00091P)-20190523.pdf) ## Pinout @@ -41,7 +41,7 @@ The pinout of the FiPy is available as a [PDF File](/gitbook/assets/fipy-pinout. Do not use the 3.3V pin **in combination with** the Vin pin to supply the device as this will damage the voltage regulator on the board. ### Antenna placement -Always attach the appropriate antenna when using a wireless connection (LoRa / LTE / SigFox). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. +Always attach the appropriate antenna when using a wireless connection (LoRa / LTE / SigFox). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. ### AT Commands diff --git a/content/datasheets/development/gpy.md b/content/datasheets/development/gpy.md index 31e9c8b..9b86389 100644 --- a/content/datasheets/development/gpy.md +++ b/content/datasheets/development/gpy.md @@ -9,7 +9,7 @@ aliases: ![](/gitbook/assets/gpy-1.png) -> Note: Orient the RGB LED / reset button over the USB connector on any expansion board +> Note: Orient the RGB LED / reset button over the USB connector on any expansion board **Store**: [Buy Here](https://pycom.io/product/gpy) @@ -22,9 +22,9 @@ The datasheet of the GPy is available as a [PDF File](/gitbook/assets/specsheets The drawing of the LTE-M antenna is available as a [PDF File](/gitbook/assets/lte-m-antenna-drawing.pdf) -The Gpy is certified for [CE RED](/gitbook/assets/c03-b0-red-gpy.pdf) and [FCC DSS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dts.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-tnb.pdf) +The Gpy is certified for [CE RED](/gitbook/assets/c03-b0-red-gpy.pdf) and [FCC DSS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dts.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-tnb.pdf) -[RCM](/gitbook/assets/RCM-Gpy.pdf) +[RCM](/gitbook/assets/RCM-GPY.zip) [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-GPy(8217-00090P)-20190523.pdf) @@ -44,7 +44,7 @@ Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MIS Do not use the 3.3V pin **in combination with** the Vin pin to supply the device as this will damage the voltage regulator on the board. ### Antenna placement -Always attach the appropriate antenna when using a wireless connection (LTE). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. +Always attach the appropriate antenna when using a wireless connection (LTE). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. ### AT Commands diff --git a/content/datasheets/development/lopy4.md b/content/datasheets/development/lopy4.md index c540879..fbaebf4 100644 --- a/content/datasheets/development/lopy4.md +++ b/content/datasheets/development/lopy4.md @@ -10,7 +10,7 @@ aliases: ![](/gitbook/assets/lopy4-1.png) -> Note: Orient the RGB LED / reset button over the USB connector on any expansion board +> Note: Orient the RGB LED / reset button over the USB connector on any expansion board **Store**: [Buy Here](https://pycom.io/product/lopy4/) @@ -21,7 +21,7 @@ aliases: The datasheet of the LoPy4 is available as a [PDF File](/gitbook/assets/specsheets/Pycom_002_Specsheets_LoPy4_v2.pdf) The Lopy 4 is certified for [CE RED](/gitbook/assets/C03-B0-RED-final.pdf) and [FCC DSS](/gitbook/assets/Pycom-2AJMTLOPY4R-FCC-Grant-DSS.pdf) -[RCM](/gitbook/assets/RCM-Lopy4.pdf) +[RCM](/gitbook/assets/RCM-LOPY4.zip) [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-LoPy-4(8286-00027P)-20190523.pdf) @@ -40,11 +40,11 @@ The pinout of the LoPy4 is available as a [PDF File](/gitbook/assets/lopy4-pinou Do not use the 3.3V pin **in combination with** the Vin pin to supply the device as this will damage the voltage regulator on the board. ### Antenna placement -Always attach the appropriate antenna when using a wireless connection (LoRa / SigFox). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. +Always attach the appropriate antenna when using a wireless connection (LoRa / SigFox). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. ### Power Do not use the 3.3V pin **in combination with** the Vin pin to supply the device as this will damage the voltage regulator on the board. ### Antenna placement -Always attach the appropriate antenna when using a wireless connection (LoRa / LTE). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. +Always attach the appropriate antenna when using a wireless connection (LoRa / LTE). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code. diff --git a/content/datasheets/oem/g01.md b/content/datasheets/oem/g01.md index 0f42d65..5e303f0 100644 --- a/content/datasheets/oem/g01.md +++ b/content/datasheets/oem/g01.md @@ -22,7 +22,7 @@ The pinout of the G01 is available as a [PDF File](/gitbook/assets/g01-pinout.pd The G01 is certified for [CE RED](/gitbook/assets/c03-b0-red-final-g01.pdf) and [FCC DSS](/gitbook/assets/pycom-2ajmtg01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtg01r-fcc-grant-dts.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtg01r-fcc-grant-tnb.pdf) -[RCM](/gitbook/assets/RCM-G01.pdf) +[RCM](/gitbook/assets/RCM-G01.zip) [ROHS certification](/gitbook/assets/c03-b0-red-final.pdf) ![](/gitbook/assets/g01-pinout.png) @@ -42,4 +42,3 @@ The AT commands for the Sequans Monarch modem on the G01 are available in a [PDF ## Tutorials Tutorials on the G01 module can be found in the [examples](/tutorials/) section of this documentation. - diff --git a/static/gitbook/assets/RCM-FIPY.zip b/static/gitbook/assets/RCM-FIPY.zip new file mode 100644 index 0000000..9884631 Binary files /dev/null and b/static/gitbook/assets/RCM-FIPY.zip differ diff --git a/static/gitbook/assets/RCM-G01.zip b/static/gitbook/assets/RCM-G01.zip new file mode 100644 index 0000000..d4ac89b Binary files /dev/null and b/static/gitbook/assets/RCM-G01.zip differ diff --git a/static/gitbook/assets/RCM-GPy.zip b/static/gitbook/assets/RCM-GPy.zip new file mode 100644 index 0000000..a23ad36 Binary files /dev/null and b/static/gitbook/assets/RCM-GPy.zip differ diff --git a/static/gitbook/assets/RCM-LOPY4.zip b/static/gitbook/assets/RCM-LOPY4.zip new file mode 100644 index 0000000..1d21111 Binary files /dev/null and b/static/gitbook/assets/RCM-LOPY4.zip differ