sascha_hemi/pycom-documentation
1
0
Fork 0
mirror of https://github.com/sascha-hemi/pycom-documentation.git synced 2026-03-21 11:06:37 +01:00
Code Issues Packages Projects Releases Wiki Activity

Revert "Pygate (#274)"

Browse Source 
This reverts commit 0ef58eaf8c.
This commit is contained in:
Christian Ehlers
2020-06-17 23:18:56 +02:00
parent 0ef58eaf8c
commit 472eb71378
36 changed files with 432 additions and 1408 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
content/tutorials/all/PoE.md
View File

@@ -1,22 +0,0 @@
---
title: "PoE"
aliases:
- tutorials/all/PoE.html
- tutorials/all/PoE.md
- chapter/tutorials/all/PoE
---
The PyEthernet module has onboard Power over Ethernet (PoE) power supply. This means that you can power your hardware with only an ethernet cable coming from a power injector. However, since the PoE is non-isolated, you must adhere to the following warning!
WARNING:
PoE power supply of PyEthernet module has no galvanic isolation. This means, that in accordance with
IEEE 802.3-2005 standard you must make sure that when powered from PoE power injector there are no other external connections to any part of the module or other hardware where it is installed. Such as USB cable, serial to USB bridge, logic analyser, an oscilloscope, etc.
As in certain hardware configurations it can lead to unrecoverable damage of not only the PyEthernet module but all hardware connected to it.
Be aware - violation of that requirement voids Pycom warranty.
The use of battery with PoE is allowed.
![](/gitbook/assets/PoE-NI.png)

278
content/tutorials/all/PyGate.md
View File

@@ -1,278 +0,0 @@
## Pygate
The Pygate is an 8-channel LoRaWAN gateway. This page will help you get started with it.
The Pygate board can have an PyEthernet adapter connected which allows an ethernet connection. The PyEthernet also support PoE. Do check the separate [page and warning for PoE-NI!](/tutorials/all/poe)
### Quickstart
To connect your Pygate to a LoRa server, follow these steps:
1. Attach a WiPy, GPy or LoPy4 to the Pygate. The RGB LED of the development board should be aligned with the USB port of the Pygate.
1. Attach the LoRa Antenna to the Pygate.
1. Flash the Pycom Device with with a firmware build where Pygate functionality is enabled.
1. Create a `config.json` for your Pygate and upload it.
1. Create a `main.py` that creates an uplink (wifi, ethernet or lte) and runs the LoRa packet fowarder.
1. Run the `main.py`.
1. Now it is operational. The communication from other LoRa nodes such as a LoPy4 will now reach the gateway and will receive up and downlink via the PyGate.
1. To stop the Pygate at any time press Ctrl-C on the REPL and run `machine.pygate_deinit()`. It will take a few seconds to stop the gateway tasks and safely power-off the concentrator.
Make sure you supply a config matching your region (EU868, US915, etc), e.g. https://github.com/Lora-net/packet_forwarder/tree/master/lora_pkt_fwd/cfg. If you are in EU region, it should be sufficent to update the example below with your GW ID, the LoRa server address and port number.
### Example TTN Wifi
The following example shows the script and json file to run the Pygate over Wifi connecting to [The Things Network](https://www.thethingsnetwork.org/).
1. log in to https://console.thethingsnetwork.org/
1. go to Gateways and register a new gateway
1. select "I'm using a legacy packet forwarder"
1. make up a EUI (8 byte hexadecimal value) and register it on the TTN website
1. enter the EUI in your `config.json` under `gateway_ID` (Just enter the hex digits without the "eui-" prefix and without spaces)
1. select your Frequency Plan
1. select a router - also enter the hostname in your `config.json` under `server_address`
1. enter your wifi SSID and password in `main.py`
1. upload `config.json` and `main.py` and reset the board
1. you will see how it creates the uplink connection and then start the LoRa GW. It will print out some debug information while it is running. After some initialization it will print "LoRa GW started" and the LED will turn green.
```python
from network import WLAN
import time
import machine
from machine import RTC
import pycom
# Disable Hearbeat
pycom.heartbeat(False)
# Define callback function for Pygate events
def machine_cb (arg):
evt = machine.events()
if (evt & machine.PYGATE_START_EVT):
# Green
pycom.rgbled(0x103300)
elif (evt & machine.PYGATE_ERROR_EVT):
# Red
pycom.rgbled(0x331000)
elif (evt & machine.PYGATE_STOP_EVT):
# RGB off
pycom.rgbled(0x000000)
# register callback function
machine.callback(trigger = (machine.PYGATE_START_EVT | machine.PYGATE_STOP_EVT | machine.PYGATE_ERROR_EVT), handler=machine_cb)
# Connect to a Wifi Network
wlan = WLAN(mode=WLAN.STA)
wlan.connect(ssid='<SSID>', auth=(WLAN.WPA2, "<PASSWORD>"))
while not wlan.isconnected():
time.sleep(1)
print("Wifi Connection established")
# Sync time via NTP server for GW timestamps on Events
rtc = RTC()
rtc.ntp_sync(server="0.pool.ntp.org")
# Read the GW config file from Filesystem
fp = open('/flash/config.json','r')
buf = fp.read()
# Start the Pygate
machine.pygate_init(buf)
```
A sample `config.json` file for gateway configuration in EU868 region:
```json
{
"SX1301_conf": {
"lorawan_public": true,
"clksrc": 1,
"antenna_gain": 0,
"radio_0": {
"enable": true,
"type": "SX1257",
"freq": 867500000,
"rssi_offset": -164.0,
"tx_enable": true,
"tx_freq_min": 863000000,
"tx_freq_max": 870000000
},
"radio_1": {
"enable": true,
"type": "SX1257",
"freq": 868500000,
"rssi_offset": -164.0,
"tx_enable": false
},
"chan_multiSF_0": {
"enable": true,
"radio": 1,
"if": -400000
},
"chan_multiSF_1": {
"enable": true,
"radio": 1,
"if": -200000
},
"chan_multiSF_2": {
"enable": true,
"radio": 1,
"if": 0
},
"chan_multiSF_3": {
"enable": true,
"radio": 0,
"if": -400000
},
"chan_multiSF_4": {
"enable": true,
"radio": 0,
"if": -200000
},
"chan_multiSF_5": {
"enable": true,
"radio": 0,
"if": 0
},
"chan_multiSF_6": {
"enable": true,
"radio": 0,
"if": 200000
},
"chan_multiSF_7": {
"enable": true,
"radio": 0,
"if": 400000
},
"chan_Lora_std": {
"enable": true,
"radio": 1,
"if": -200000,
"bandwidth": 250000,
"spread_factor": 7
},
"chan_FSK": {
"enable": true,
"radio": 1,
"if": 300000,
"bandwidth": 125000,
"datarate": 50000
},
"tx_lut_0": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_1": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_2": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_3": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_4": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_5": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_6": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 9,
"dig_gain": 3
},
"tx_lut_7": {
"pa_gain": 0,
"mix_gain": 6,
"rf_power": 11,
"dig_gain": 3
},
"tx_lut_8": {
"pa_gain": 0,
"mix_gain": 5,
"rf_power": 13,
"dig_gain": 2
},
"tx_lut_9": {
"pa_gain": 0,
"mix_gain": 8,
"rf_power": 14,
"dig_gain": 3
},
"tx_lut_10": {
"pa_gain": 0,
"mix_gain": 6,
"rf_power": 15,
"dig_gain": 2
},
"tx_lut_11": {
"pa_gain": 0,
"mix_gain": 6,
"rf_power": 16,
"dig_gain": 1
},
"tx_lut_12": {
"pa_gain": 0,
"mix_gain": 9,
"rf_power": 17,
"dig_gain": 3
},
"tx_lut_13": {
"pa_gain": 0,
"mix_gain": 10,
"rf_power": 18,
"dig_gain": 3
},
"tx_lut_14": {
"pa_gain": 0,
"mix_gain": 11,
"rf_power": 19,
"dig_gain": 3
},
"tx_lut_15": {
"pa_gain": 0,
"mix_gain": 12,
"rf_power": 20,
"dig_gain": 3
}
},
"gateway_conf": {
"gateway_ID": "XXXXXXXXXXXXXXXX",
"server_address": "router.eu.thethings.network",
"serv_port_up": 1700,
"serv_port_down": 1700,
"keepalive_interval": 10,
"stat_interval": 30,
"push_timeout_ms": 100,
"forward_crc_valid": true,
"forward_crc_error": false,
"forward_crc_disabled": false
}
}
```

253
content/tutorials/all/ble_mesh.md
View File

@@ -1,253 +0,0 @@
---
title: "Pymesh BLE Examples"
aliases:
- tutorials/all/ble_mesh.html
- tutorials/all/ble_mesh.md
- chapter/tutorials/all/ble_mesh
---
Pymesh BLE module enables many-to-many device connections, based on the Bluetooth module.
For the API, please check the section [Pymesh BLE API](/firmwareapi/pycom/network/bluetooth/ble_mesh/).
## Generic OnOff Example
Generic OnOff model is one of the simplest model in BLE Mesh.
This model illustrates the light-switches (OnOff Client) and light-bulbs (OnOff Server). In other words, the Client can send on/off commands to one/all nodes, and the Server is records state changes based on these commands.
### OnOff Server
OnOff Server has one boolean State. Server can Get, Set or send Status about this State to Client(s).
In the example below, during Provisioning, `Output OOB` can be selected. LED is yellow in case of Not-provisioned, and green in case of Provisioned state.
Changing the State of Server, LED's light is green or red.
```python
from network import Bluetooth
import pycom
import time
BLE_Name = "OnOff Server 18"
def blink_led(n):
for x in range(n):
pycom.rgbled(0xffff00) # yellow on
time.sleep(0.3)
pycom.rgbled(0x000000) # off
time.sleep(0.3)
def server_cb(new_state, event, recv_op):
print("SERVER | State: ", new_state)
# Turn on LED on board based on State
if new_state == True:
pycom.rgbled(0x007f00) # green
else:
pycom.rgbled(0x7f0000) # red
def prov_callback(event, oob_pass):
if(event == BLE_Mesh.PROV_REGISTER_EVT or event == BLE_Mesh.PROV_RESET_EVT):
# Yellow if not Provision yet or Reseted
pycom.rgbled(0x555500)
if(event == BLE_Mesh.PROV_COMPLETE_EVT):
# Green if Provisioned
pycom.rgbled(0x007f00)
if(event == BLE_Mesh.PROV_OUTPUT_OOB_REQ_EVT):
print("Privisioning blink LED num:", oob_pass)
blink_led(oob_pass)
# BLE Mesh module
BLE_Mesh = Bluetooth.BLE_Mesh
# Turn off the heartbeat behavior of the LED
pycom.heartbeat(False)
# Need to turn ON Bluetooth before using BLE Mesh
bluetooth = Bluetooth()
# Create a Primary Element with GATT Proxy feature and add a Server model to the Element
element = BLE_Mesh.create_element(primary=True, feature=BLE_Mesh.GATT_PROXY)
model_server = element.add_model(BLE_Mesh.GEN_ONOFF, BLE_Mesh.SERVER, callback=server_cb)
# Initialize BLE_Mesh
BLE_Mesh.init(BLE_Name, auth=BLE_Mesh.OOB_OUTPUT, callback=prov_callback)
# Turn on Provisioning Advertisement
BLE_Mesh.set_node_prov(BLE_Mesh.PROV_ADV|BLE_Mesh.PROV_GATT)
print("\nBLE Mesh started")
print(BLE_Name, "waits to be provisioned\n")
"""
# After this node was provisioned
# Current state can be read using
model_server.get_state()
"""
```
### OnOff Client
Client can Get or Set State of Server. In case of Get, or Server Status, Client Gets the Status through the Model's callback.
```python
from network import Bluetooth
import pycom
import time
BLE_Name = "OnOff Client 17"
def blink_led(n):
for x in range(n):
pycom.rgbled(0xffff00) # yellow on
time.sleep(0.3)
pycom.rgbled(0x000000) # off
time.sleep(0.3)
def client_cb(new_state, event, recv_op):
print("CLIENT | State: ", new_state)
def prov_callback(event, oob_pass):
if(event == BLE_Mesh.PROV_REGISTER_EVT or event == BLE_Mesh.PROV_RESET_EVT):
# Yellow if not Provision yet or Reseted
pycom.rgbled(0x555500)
if(event == BLE_Mesh.PROV_COMPLETE_EVT):
# Green if Provisioned
pycom.rgbled(0x007f00)
if(event == BLE_Mesh.PROV_OUTPUT_OOB_REQ_EVT):
print("Privisioning blink LED num:", oob_pass)
blink_led(oob_pass)
# BLE Mesh module
BLE_Mesh = Bluetooth.BLE_Mesh
# Turn off the heartbeat behavior of the LED
pycom.heartbeat(False)
# Need to turn ON Bluetooth before using BLE Mesh
bluetooth = Bluetooth()
# Create a Primary Element with GATT Proxy feature and add a Server model to the Element
element = BLE_Mesh.create_element(primary=True, feature=BLE_Mesh.GATT_PROXY)
model_client = element.add_model(BLE_Mesh.GEN_ONOFF, BLE_Mesh.CLIENT, callback=client_cb)
# Initialize BLE_Mesh
BLE_Mesh.init(BLE_Name, auth=BLE_Mesh.OOB_OUTPUT, callback=prov_callback)
# Turn on Provisioning Advertisement
BLE_Mesh.set_node_prov(BLE_Mesh.PROV_ADV|BLE_Mesh.PROV_GATT)
print("\nBLE Mesh started")
print(BLE_Name, "waits to be provisioned\n")
"""
# After this node was provisioned
# transmit the change of state broadcasting in the Mesh
model_client.set_state(False, 0xFFFF)
model_client.set_state(True, 0xFFFF)
# or to a unique server
model_client.set_state(False, 3)
model_client.set_state(True, 5)
"""
```
## Sensor Example
In case of Sensor Models, State of Server can be modified only by Server itself, Client can only Get the State by calling Client's Get, or by Servers Status call, but cannot modify the Server's State.
### Sensor Server
In this example Server takes a time measurement every 1 seconds, and send a Status message every 5 seconds, after it was provisioned.
```python
from network import Bluetooth
import pycom
import time
from machine import Timer
def read_sensor(alarm):
# In this example sensor reads local seconds
if(device_provisioned):
model_server.set_state(time.localtime()[5])
print("SENSOR | State: ", model_server.get_state())
def status_sensor(alarm):
if (device_provisioned):
model_server.status_state()
def prov_callback(event, oob_pass):
global device_provisioned
if(event == BLE_Mesh.PROV_REGISTER_EVT or event == BLE_Mesh.PROV_RESET_EVT):
# Yellow if not Provision yet or Reseted
pycom.rgbled(0x555500)
device_provisioned = False
if(event == BLE_Mesh.PROV_COMPLETE_EVT):
# Green if Provisioned
pycom.rgbled(0x007f00)
device_provisioned = True
# BLE Mesh module
BLE_Mesh = Bluetooth.BLE_Mesh
# Turn off the heartbeat behavior of the LED
pycom.heartbeat(False)
# Need to turn ON Bluetooth before using BLE Mesh
bluetooth = Bluetooth()
# Create a Primary Element with GATT Proxy feature and add a Server model to the Element
element = BLE_Mesh.create_element(primary=True, feature=BLE_Mesh.GATT_PROXY)
model_server = element.add_model(BLE_Mesh.SENSOR, BLE_Mesh.SERVER, sen_min = 0, sen_max = 59, sen_res = 1)
# Initialize BLE_Mesh
BLE_Mesh.init("Pycom Sensor Server", callback=prov_callback)
# Turn on Provisioning Advertisement
BLE_Mesh.set_node_prov(BLE_Mesh.PROV_ADV|BLE_Mesh.PROV_GATT)
# Sensor takes measurement every 1 second
Timer.Alarm(read_sensor, 1, periodic=True)
# Sensor send status every 5 seconds
Timer.Alarm(status_sensor, 5, periodic=True)
```
### Sensor Client
Sensor Client is looking for measurements, as Server sends Status every 5 seconds. Between these calls, Client can Get message any time.
```python
from network import Bluetooth
import pycom
def client_cb(new_state, event, recv_op):
print("CLIENT | State: ", new_state)
def prov_callback(event, oob_pass):
if(event == BLE_Mesh.PROV_REGISTER_EVT or event == BLE_Mesh.PROV_RESET_EVT):
# Yellow if not Provision yet or Reseted
pycom.rgbled(0x555500)
if(event == BLE_Mesh.PROV_COMPLETE_EVT):
# Green if Provisioned
pycom.rgbled(0x007f00)
# BLE Mesh module
BLE_Mesh = Bluetooth.BLE_Mesh
# Turn off the heartbeat behavior of the LED
pycom.heartbeat(False)
# Need to turn ON Bluetooth before using BLE Mesh
bluetooth = Bluetooth()
# Create a Primary Element with GATT Proxy feature and add a Server model to the Element
element = BLE_Mesh.create_element(primary=True, feature=BLE_Mesh.GATT_PROXY)
model_client = element.add_model(BLE_Mesh.SENSOR, BLE_Mesh.CLIENT, callback=client_cb, sen_min = 0, sen_max = 59, sen_res = 1)
# Initialize BLE_Mesh
BLE_Mesh.init("Pycom Sensor Client", callback=prov_callback)
# Turn on Provisioning Advertisement
BLE_Mesh.set_node_prov(BLE_Mesh.PROV_ADV|BLE_Mesh.PROV_GATT)
```