diff --git a/content/datasheets/helium_hotspot.md b/content/datasheets/helium_hotspot.md
new file mode 100644
index 0000000..01d577c
--- /dev/null
+++ b/content/datasheets/helium_hotspot.md
@@ -0,0 +1,87 @@
+---
+title: "Helium Hotspot Miner"
+aliases:
+    - datasheets/helium_hotspot.html
+    - datasheets/helium_hotspot.md
+    - product-info/helium_hotspot
+    - chapter/datasheets/helium_hotspot
+---
+
+**Store**: [Buy Here](https://pycom.io/product/pygate/)
+
+This full Hotspot is compatible with Helium LongFi™ and Helium Blockchain technology.
+
+Use it to mine [Helium HNT](https://www.helium.com/token) Crypto Coins on the [Helium LoRaWAN Network](https://www.helium.com/lorawan). Helium’s network is referred to as The People's Network. It is powered by an entirely new incentive model - made possible by their Helium Blockchain. 
+Installing a LoRa Hotspot means you are rewarded in HNT crypto coins as soon as you have [“Proof-of-Coverage”](https://docs.helium.com/blockchain/proof-of-coverage/).
+
+![](/gitbook/assets/hotspot1.png)
+
+## What's included in the price?
+When you are setting up a Hotspot Miner, there are a couple of fees to note:
+
+* PY Hotspot Miner Kit including antennas, and power supply
+* Hotspot Fee $40 ("Add a Full Hotspot")
+* First Location Assertion Fee $10 ("Assert Hotspot Location")
+
+NOTE: If you move your Hotspot Miner to a new location, you will need to pay the Location Assertion fee again. 
+Pycom will only pay one Location Assertion Fee. There may be other fees. The full list of additional Helium transaction fees are [here](https://docs.helium.com/blockchain/transaction-fees/).
+
+## Hotspot Overview
+This fully certified Helium Hotspot contains
+
+* Pygate: 2 variants: 868 Mhz (EU and Africa) and 915 Mhz (North/South America and APAC). Check certifications are confirmed for your region.
+* LoRa Antenna
+* WiFi Antenna
+* Pygate Case for Indoor use
+* Power supply
+
+### Optional extras
+
+* Power over Ethernet adaptor 
+
+### Certifications
+
+* Certified by Helium [Dewi](https://www.helium.com/ecosystem)
+
+
+### Regulatory certifications
+
+* CE completed
+* FCC completed
+* IC completed
+* RCM pending
+
+## Helium Hotspot miner (Full Hotspot) specifications
+
+* Raspberry Pi Compute Module 4 (CM4102000)
+* Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
+* 2GB LPDDR4-3200 SDRAM with ECC
+* WiFi 2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac wireless
+* Bluetooth 5.0, BLE
+* On board electronic switch to select between PCB trace or external antenna
+* Baseband processor: SX1308
+* Dual SX1257 transceivers for a total of 8 channels support
+* Maximum TX power (LoRaWAN) 23.45 dBm
+* Frequencies: EU 863-870 MHz or US 902-928 MHz
+* 64GB uSD card with Operating System and Helium Miner software stack
+* Powered via USB-C or optional Ethernet + PoE adapter daughter board
+
+Choose your gateway frequency using this detailed [country list](https://lora-alliance.org/sites/default/files/2020-06/rp_2-1.0.1.pdf)
+
+## Full Specifications
+
+Data Sheet [Here](https://pycom.io/wp-content/uploads/2022/03/Hotspot_Spec-sheet-V1.12-First-Release.pdf)
+
+There is more information about how to mine HNT and much more on the [Helium docs site.](https://docs.helium.com/)
+
+## Getting started
+1. Upload the latest stable `hotspot` firmware release using the [firmware updater](/updatefirmware/device/).
+2. Follow the [tutorial](https://docs.pycom.io/gettingstarted/registration/lora/helium/) to register and connect your Hotspot  to the Helium Network.
+
+## Notes
+### Battery Charger
+
+The Pygate features a single cell Li-Ion/Li-Po charger with a JST PHR‑2 connector. When the board is being powered via the USB-C connector, the Pygate will charge the battery if connected.
+> Make sure you check the polarity of the battery before plugging it in! Connect the positive side to the side marked with a `+`.
+
+