diff --git a/getting-started/hardware/fipy.md b/getting-started/hardware/fipy.md index e769b5b..aa368b4 100644 --- a/getting-started/hardware/fipy.md +++ b/getting-started/hardware/fipy.md @@ -26,11 +26,7 @@ * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md). * Look for the reset button on the FiPy module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. -* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. - -![](../../.gitbook/assets/pysense_fipy.png) - -![](../../.gitbook/assets/pytrack_fipy.png) +* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqVauBuoNMgcByrNql%2FPysense_FiPy.png?generation=1534772069160637&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqVdDdxkK38AlRxtkc%2FPytrack_FiPy.png?generation=1534772071490748&alt=media) {% endtab %} {% tab title="USB UART Adapter" %} diff --git a/getting-started/hardware/gpy.md b/getting-started/hardware/gpy.md index 1ef6412..3df96b8 100644 --- a/getting-started/hardware/gpy.md +++ b/getting-started/hardware/gpy.md @@ -24,11 +24,7 @@ * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md). * Look for the reset button on the GPy module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. -* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. - -![](../../.gitbook/assets/pysense_gpy.png) - -![](../../.gitbook/assets/pytrack_gpy.png) +* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqejpmTIS1tbGw0Vrl%2FPysense_GPy.png?generation=1534772072781141&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqekpWIfccll6qkt85%2FPytrack_GPy.png?generation=1534772080535030&alt=media) {% endtab %} {% tab title="USB UART Adapter" %} diff --git a/getting-started/hardware/lopy.md b/getting-started/hardware/lopy.md index 2193c41..7d07644 100644 --- a/getting-started/hardware/lopy.md +++ b/getting-started/hardware/lopy.md @@ -24,11 +24,7 @@ * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md). * Look for the reset button on the LoPy module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. -* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. - -![](../../.gitbook/assets/pysense_lopy.png) - -![](../../.gitbook/assets/pytrack_lopy.png) +* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIq_ZvQtB3k9-QzXSEi%2FPysense_LoPy.png?generation=1534772084691543&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIq_aBQabbigN5pR8W2%2FPytrack_LoPy.png?generation=1534772068406423&alt=media) {% endtab %} {% tab title="USB UART Adapter" %} diff --git a/getting-started/hardware/lopy4.md b/getting-started/hardware/lopy4.md index 0661bb8..0d74c99 100644 --- a/getting-started/hardware/lopy4.md +++ b/getting-started/hardware/lopy4.md @@ -24,11 +24,7 @@ * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md). * Look for the reset button on the LoPy4 module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. -* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. - -![](../../.gitbook/assets/pysense_lopy4.png) - -![](../../.gitbook/assets/pytrack_lopy4.png) +* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqbk7blltxqNtvQzH_%2FPysense_LoPy4.png?generation=1534772087747503&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqblUw130dL1aMAkLT%2FPytrack_LoPy4.png?generation=1534772079835788&alt=media) {% endtab %} {% tab title="USB UART Adapter" %} diff --git a/getting-started/hardware/sipy.md b/getting-started/hardware/sipy.md index 47c96fb..a122cd3 100644 --- a/getting-started/hardware/sipy.md +++ b/getting-started/hardware/sipy.md @@ -24,11 +24,7 @@ * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md). * Look for the reset button on the SiPy module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. -* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. - -![](../../.gitbook/assets/pysense_sipy.png) - -![](../../.gitbook/assets/pytrack_sipy.png) +* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqd_e51Wyuw40k6yJv%2FPysense_SiPy.png?generation=1534772077104600&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqdauW7rAnQlc-AL07%2FPytrack_SiPy.png?generation=1534772072530754&alt=media) {% endtab %} {% tab title="USB UART Adapter" %} diff --git a/getting-started/hardware/wipy.md b/getting-started/hardware/wipy.md index 3aa0857..b094b37 100644 --- a/getting-started/hardware/wipy.md +++ b/getting-started/hardware/wipy.md @@ -24,11 +24,7 @@ * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md). * Look for the reset button on the WiPy module \(located at a corner of the board, next to the LED\). * Locate the USB connector on the Pysense/Pytrack/Pyscan. -* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. - -![](../../.gitbook/assets/pysense_wipy.png) - -![](../../.gitbook/assets/pytrack_wipy.png) +* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqfutE_BZ6gjVdmiv0%2FPysense_WiPy.png?generation=1534772071067482&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqfvoSjvxTIwgw2MSg%2FPytrack_WiPy.png?generation=1534772075484372&alt=media) {% endtab %} {% tab title="USB UART Adapter" %} diff --git a/pybytes/add-device/README.md b/pybytes/add-device/README.md index 815602a..0e1b93f 100644 --- a/pybytes/add-device/README.md +++ b/pybytes/add-device/README.md @@ -10,19 +10,19 @@ In Pybytes, go to `Devices` Page: ![](../../.gitbook/assets/1-1.jpg) -1. Select your device \(e.g., WiPy, LoPy, SiPy, etc.\); +2. Select your device \(e.g., WiPy, LoPy, SiPy, etc.\); ![](../../.gitbook/assets/2-1.jpg) -1. Select your shield \(e.g., PySense, PyTrack, PyScan or other\); +3. Select your shield \(e.g., PySense, PyTrack, PyScan or other\); ![](../../.gitbook/assets/3%20%281%29.jpg) -1. Select your network option; +4. Select your network option; ![](../../.gitbook/assets/4%20%281%29.jpg) -1. Enter a unique name and the network credentials \(SSID and password\) for your device; +5. Enter a unique name and the network credentials \(SSID and password\) for your device; ![](../../.gitbook/assets/5-1.jpg) @@ -38,7 +38,7 @@ Select how you would like to connect your device to Pybytes: {% page-ref page="quick.md" %} -1. [Connect your device by flashing Pybytes Library](flash.md) +2. [Connect your device by flashing Pybytes Library](flash.md) {% page-ref page="flash.md" %} diff --git a/pybytes/add-device/flash.md b/pybytes/add-device/flash.md index cd005e5..5c636cb 100644 --- a/pybytes/add-device/flash.md +++ b/pybytes/add-device/flash.md @@ -20,9 +20,11 @@ At the last step of the "Add Device" process: You can also download _Pybytes library_ at the device's settings page: -1. Navigate to your device in Pybytes; -2. On your device's page click on settings tab; -3. Click on the button _Download_ at Pybytes library; +2. Navigate to your device in Pybytes; + +3. On your device's page click on settings tab; + +4. Click on the button _Download_ at Pybytes library; ![](../../.gitbook/assets/pybytes-library-download%20%281%29.gif)