From f221a3c1a3250da14165f6af77a09f28d474faf2 Mon Sep 17 00:00:00 2001 From: Daniel Spindelbauer Date: Tue, 14 Aug 2018 11:05:01 +0000 Subject: [PATCH] GitBook: [master] one page modified --- 1.-getting-started/installingsoftware/firmwaretool.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/1.-getting-started/installingsoftware/firmwaretool.md b/1.-getting-started/installingsoftware/firmwaretool.md index 61ff147..74e541a 100644 --- a/1.-getting-started/installingsoftware/firmwaretool.md +++ b/1.-getting-started/installingsoftware/firmwaretool.md @@ -40,7 +40,7 @@ If you are having any issues, make sure the **TX and RX jumpers** are present on When using a Pysense/Pytrack/Pyscan/Expansion Board 3.0 to update your module you are not required to make a connection between `G23` and `GND`, the Pysense/Pytrack/Pyscan/Expansion Board 3.0 will do this automatically. {% endhint %} -1. Before connecting your module to a Pysense/Pytrack board, you should update the firmware on the Pysense/Pytrack. Instructions on how to do this can be found [here](https://docs.pycom.io/chapter/pytrackpysense/installation/firmware.html). +1. Before connecting your module to a Pysense/Pytrack board, you should update the firmware on the Pysense/Pytrack. Instructions on how to do this can be found [here](../../3.-pytrack-pysense-pyscan/installation/firmware.md). 2. Disconnect your device from your computer 3. Insert module into Expansion Board 4. Reconnect the board via USB to your computer