diff --git a/datasheets/development/fipy.md b/datasheets/development/fipy.md
index b925254..b8d3ecf 100644
--- a/datasheets/development/fipy.md
+++ b/datasheets/development/fipy.md
@@ -4,7 +4,7 @@
 
 **Store**: [Buy Here](http://www.pycom.io/fipy)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/fipy.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/fipy.md)
 
 ## Pinout
 
diff --git a/datasheets/development/gpy.md b/datasheets/development/gpy.md
index 53f4fa6..aa09c18 100644
--- a/datasheets/development/gpy.md
+++ b/datasheets/development/gpy.md
@@ -4,7 +4,7 @@
 
 **Store**: [Buy Here](http://www.pycom.io/gpy)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/gpy.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/gpy.md)
 
 ## Pinout
 
@@ -42,7 +42,7 @@ The `Vin` pin on the GPy can be supplied with a voltage ranging from `3.5v` to `
 
 ### AT Commands
 
-The AT commands for the Sequans Monarch modem on the GPy are available in a [PDF file](https://docs.pycom.io/chapter/datasheets/downloads/Monarch_4G-EZ_LR5110_ATCommands_ReferenceManual_Rev3_NOCONFIDENTIAL.pdf).
+The AT commands for the Sequans Monarch modem on the GPy are available in a PDF file.
 
 {% file src="../../.gitbook/assets/monarch\_4g-ez\_lr5110\_atcommands\_referencemanual\_rev3\_noconfidential-1.pdf" caption="AT Commands for Sequans" %}
 
diff --git a/datasheets/development/lopy.md b/datasheets/development/lopy.md
index 7912b46..8d3cbcb 100644
--- a/datasheets/development/lopy.md
+++ b/datasheets/development/lopy.md
@@ -4,7 +4,7 @@
 
 **Store**: [Buy Here](http://www.pycom.io/lopy)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/lopy.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/lopy.md)
 
 ## Pinout
 
diff --git a/datasheets/development/lopy4.md b/datasheets/development/lopy4.md
index ee1ae40..46bfb7d 100644
--- a/datasheets/development/lopy4.md
+++ b/datasheets/development/lopy4.md
@@ -4,7 +4,7 @@
 
 **Store**: [Buy Here](http://www.pycom.io/lopy4)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/lopy4.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/lopy4.md)
 
 ## Pinout
 
diff --git a/datasheets/development/sipy.md b/datasheets/development/sipy.md
index 7f161ec..c9817a7 100644
--- a/datasheets/development/sipy.md
+++ b/datasheets/development/sipy.md
@@ -4,7 +4,7 @@
 
 **Store**: [Buy Here](http://www.pycom.io/sipy)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/sipy.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/sipy.md)
 
 ## Pinout
 
diff --git a/datasheets/development/wipy2.md b/datasheets/development/wipy2.md
index 1da6a1a..e818e05 100644
--- a/datasheets/development/wipy2.md
+++ b/datasheets/development/wipy2.md
@@ -2,9 +2,9 @@
 
 ![](../../.gitbook/assets/wipy2-1.png)
 
-**Store**: Discontinued, See [WiPy3](https://docs.pycom.io/chapter/datasheets/development/wipy3.html)
+**Store**: Discontinued, See [WiPy3](wipy3.md)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/wipy.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/wipy.md)
 
 ## Pinout
 
diff --git a/datasheets/development/wipy3.md b/datasheets/development/wipy3.md
index 3e0f10f..aad4d97 100644
--- a/datasheets/development/wipy3.md
+++ b/datasheets/development/wipy3.md
@@ -4,7 +4,7 @@
 
 **Store**: [Buy Here](http://www.pycom.io/wipy-3)
 
-**Getting Started:** [Click Here](https://docs.pycom.io/chapter/gettingstarted/connection/wipy.html)
+**Getting Started:** [Click Here](../../gettingstarted/connection/wipy.md)
 
 ## Pinout
 
diff --git a/gettingstarted/connection/lopy4.md b/gettingstarted/connection/lopy4.md
index 6f19e8d..d605442 100644
--- a/gettingstarted/connection/lopy4.md
+++ b/gettingstarted/connection/lopy4.md
@@ -80,7 +80,7 @@ If you intend on using the LoRa/Sigfox connectivity of the LoPy4 you **must** co
 
 ### WiFi/Bluetooth \(optional\)
 
-All Pycom modules, including the LoPy4, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy4 in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](https://docs.pycom.io/chapter/firmwareapi/pycom/network/wlan.html)
+All Pycom modules, including the LoPy4, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy4 in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
 
 ![](../../.gitbook/assets/wifi_pigtail_ant_lopy4.png)
 
diff --git a/gettingstarted/installation/drivers.md b/gettingstarted/installation/drivers.md
index b8d94b8..8547a41 100644
--- a/gettingstarted/installation/drivers.md
+++ b/gettingstarted/installation/drivers.md
@@ -16,7 +16,7 @@ All our products will work out of the box for Windows 8/10/+. If using Windows 7
 
 Please download the driver software from the link below.
 
-[Pysense/Pytrack/Pyscan/Expansion Board 3.0 Serial Driver](https://github.com/pycom/pycom-docs/tree/37661883902849b1a931ee273a23ae8e0f3d773e/chapter/pytrackpysense/installation/pycom.inf)
+[Pysense/Pytrack/Pyscan/Expansion Board 3.0 Serial Driver](https://github.com/pycom/pycom-documentation/blob/master/pytrackpysense/installation/pycom.inf)
 
 ### Installation
 
diff --git a/pytrackpysense/installation/drivers.md b/pytrackpysense/installation/drivers.md
index e0cb051..e1bfbfe 100644
--- a/pytrackpysense/installation/drivers.md
+++ b/pytrackpysense/installation/drivers.md
@@ -8,7 +8,7 @@ Please follow the instructions below to install the required drivers.
 
 Please download the driver software from the link below.
 
-[Pytrack/Pysense/Pyscan/Expansion board 3 Driver](https://github.com/pycom/pycom-docs/tree/37661883902849b1a931ee273a23ae8e0f3d773e/chapter/pytrackpysense/installation/pycom.inf)
+[Pytrack/Pysense/Pyscan/Expansion Board 3 Driver](https://github.com/pycom/pycom-documentation/blob/master/pytrackpysense/installation/pycom.inf)
 
 ## Installation