pycom-documentation/content/gettingstarted/programming/usbserial.md at aa07349798f6689505504ef13aa17d71862a9ecb

mirror of https://github.com/sascha-hemi/pycom-documentation.git synced 2026-03-21 17:06:17 +01:00

Files

gijsio 9a0602f9e5 Restructure, rev1

* Products
    -> updated with new products
    -> added accessories
* Getting started
   -> re-structured getting started guide
   -> removed some of the advanced stuff
* Tutorials / Examples
   -> added categories
   -> added new basic tutorials Sleep, GPIO and Pring
   -> added WiFi ap / sta tutorial
   -> added wifi Scan MAC tutorial
* Firmware API
   -> added pysense pytrack pygate categories here
* Datasheets
   -> added CE FCC and RoHS documents
   -> added pysense2 and pytrack 2 templates
* Update firmware
   -> new section, added all methods of updating the firmware
* License
   -> put license in its own section

general remarks:
-> updated the layout / theme
   no more red code text
   codeblocks actually work now
-> general layout updates, removed the old html structures (mostly)

2020-07-09 12:57:44 +02:00

867 B

Raw Blame History

title, aliases

title

aliases

USB Serial Converter

gettingstarted/hardware/usbserial.html

gettingstarted/hardware/usbserial.md

chapter/gettingstarted/hardware/usbserial

When you do not own an expansion board, it is possible to connect to your device using a USB to Serial adapter.

Note: We do not recommend this setup for beginners.

To connect to your device using a USB to Serial adapter, connect the following pins:

Note: Please ensure the signal and voltage level of your UART adapter does not exceed 3.3V. When possible, change the settings on your adapter.

Connect the RX and TX of your USB converter to the TX and RX of the device respectively.
To put the device into bootloader mode to update the firmware, you will need to connect P2 to GND. We recommend to connect a button for this.

867 B Raw Blame History

867 B

Raw Blame History