4.3 KiB
title, aliases
| title | aliases |
|---|---|
| Pybytes iOS |
Pybytes iOS app will allow you to quickly provision any number of devices effortlessly to Pybytes.
Further on the page you will find the following information:
Pybytes iOS installing and Device Provisioning
-
Go to App Store and download Pybytes iOS app.
-
Use your Pybytes web app account to log in.
Tip: Go to Pybytes web app with Safari on iOS or macOS and save your login credentials. Then iPhone will let you pre-fill your saved password. -
On the next screen, you will need to enter your Wi-Fi credentials.
-
After pressing START button, the devices should appear on the screen. I might take up to several minutes until all your devices are provisioned. The first device usually appears on the screen within one minute.
Tip: The name of a device provisioned device is its Wireless MAC address.
-
During the devices provisioning on the desktop in Pybytes device management platform you might see the notifications about successful provisioning of your devices in the platform. You might also see the provisioned devices in the Devices section.
Take into consideration
- If you are using iOS 12, turn off your Wi-Fi completely on your iPhone.
- Use only Wi-Fi network with 2.4GHz (Pycom devices cannot connect to 5GHz network)
- Your device might be provisioned faster if you move your device closer to your Wi-Fi router.
- Make sure your devices are powered on and running firmware 1.20.1 or newer.
- You cannot provision the same devices on the different Pybytes accounts unless you erased the flash memory of them before provisioning.
- Provisioning is in the process only if you see the spinner on the screen. If it’s disappeared, then you need to try to provision again.
- Please, take into account, that we are developing a new feature, therefore some challenges could happen. Let us know about any issue that happened while using Pybytes iOS support@pycom.io.
FAQ
I can’t connect to Wi-Fi in Pybytes iOS
-
First, check the version of iOS that you have. If it is iOS 12 then turn off completely the Wi-Fi connection on your phone and after try to use Pybytes iOS again for connecting to Wi-Fi.
-
If you have a later than 12 version of iOS then check (how to check) your Wi-Fi router setting. It should run 2.4 HGz Wi-Fi network.
No devices were provisioned after 5 min.
-
Check if your devices are charged or powered on
-
Go with your devices closer to the Wi-Fi router
-
Check if no one in the same room is trying to provision with Pybytes iOS app.
How long does the provisioning take?
- On average, provisioning of 6 devices takes up to 2 min. But it depends on the capacity of your Wi-Fi router and some other factors.
We hope that Pybytes iOS will simplify the process of the device provisioning. However, we are still in a development pipe and some challenges while using the App could happen. Let us know about any issue that you experienced with Pybytes iOS support@pycom.io.