Added Big AP

ESP32_AP-Flasher/platformio.ini

@@ -263,6 +263,55 @@ board_upload.flash_size = 16MB
 ; ----------------------------------------------------------------------------------------
 ; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
 ; ----------------------------------------------------------------------------------------
+[env:ESP32_S3_C6_BIG_AP]
+board = esp32-s3-devkitc-1
+board_build.partitions = large_spiffs_16MB.csv
+build_unflags =
+	-std=gnu++11
+    -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
+lib_deps =
+    ${env.lib_deps}
+build_flags = 
+	-std=gnu++17
+	${env.build_flags}
+	-D HAS_BLE_WRITER
+	-D CORE_DEBUG_LEVEL=0
+    -D ARDUINO_USB_CDC_ON_BOOT
+	-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
+	-D CONFIG_SPIRAM_USE_MALLOC=1
+	-D POWER_NO_SOFT_POWER
+	-D BOARD_HAS_PSRAM
+	-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
+	-D FLASHER_AP_SS=-1
+	-D FLASHER_AP_CLK=-1
+	-D FLASHER_AP_MOSI=-1
+	-D FLASHER_AP_MISO=-1
+	-D FLASHER_AP_RESET=47
+	-D FLASHER_AP_POWER={-1}
+	-D FLASHER_AP_TEST=-1
+	-D FLASHER_AP_TXD=13
+	-D FLASHER_AP_RXD=14
+	-D FLASHER_DEBUG_SWS=21
+	-D FLASHER_DEBUG_TXD=15
+	-D FLASHER_DEBUG_RXD=16
+	-D FLASHER_DEBUG_PROG=7
+	-D FLASHER_LED=38
+	-D MD5_ENABLED=1
+	-D SERIAL_FLASHER_INTERFACE_UART=1
+	-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
+	-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
+	-D C6_OTA_FLASHING
+build_src_filter = 
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
+board_build.flash_mode=qio
+board_build.arduino.memory_type = qio_opi
+board_build.psram_type=qspi_opi
+board_upload.maximum_size = 16777216
+board_upload.maximum_ram_size = 327680
+board_upload.flash_size = 16MB
+; ----------------------------------------------------------------------------------------
+; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
+; ----------------------------------------------------------------------------------------
 [env:ESP32_S3_C6_NANO_AP]
 board = esp32-s3-devkitc-1
 board_build.partitions = large_spiffs_16MB.csv