tag flasher / timestamp content / bugfixes (#217)

- added webinterface for tag flasher
- added tcp transport for communicating with tag flasher (OTG USB also still works)
- added content 'timestamp', makes use of preloaded images and buttons on the 2.9" M3
- webinterface is now aware of C6 and flasher capabilities
- AP can run without ieee801.15.4 radio (i.e. flasher only) by shorting FLASHER_AP_TXD and FLASHER_AP_RXD
- added tcp transport option to OEPL-Flasher.py (serial also still works)
- added new environment OpenEPaperLink_Mini_AP_v4
- lots of finetuning and bug fixes

ESP32_AP-Flasher/platformio.ini

@@ -59,6 +59,7 @@ build_flags =
 	-D BOARD_HAS_PSRAM
 	-D SAVE_SPACE
 	-D POWER_NO_SOFT_POWER
+	-D SAVE_SPACE
 	-D FLASHER_AP_SS=11
 	-D FLASHER_AP_CLK=9
 	-D FLASHER_AP_MOSI=10
@@ -71,7 +72,7 @@ build_flags =
   	-D FLASHER_LED=15
   	-D FLASHER_RGB_LED=33
 build_src_filter = 
-	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
 board_build.psram_type=qspi_opi
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 327680
@@ -107,7 +108,7 @@ build_flags =
   	-D FLASHER_LED=15
   	-D FLASHER_RGB_LED=-1
 build_src_filter = 
-	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
 board_build.psram_type=qspi_opi
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 327680
@@ -126,7 +127,7 @@ build_unflags =
 build_flags = 
 	-std=gnu++17
 	${env.build_flags}
-	-D OPENEPAPERLINK_PCB
+	-D HAS_EXT_FLASHER
 	-D ARDUINO_USB_MODE=0
 	-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
 	-D CONFIG_SPIRAM_USE_MALLOC=1
@@ -197,8 +198,9 @@ build_flags =
 	-D FLASHER_AP_TXD=17
 	-D FLASHER_AP_RXD=16
 	-D FLASHER_LED=22
+	-D SAVE_SPACE
 build_src_filter = 
-	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
 ; ----------------------------------------------------------------------------------------
 ; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
 ; ----------------------------------------------------------------------------------------
@@ -215,7 +217,7 @@ lib_deps =
 build_flags = 
 	-std=gnu++17
 	${env.build_flags}
-	-D YELLOW_IPS_AP
+	-D HAS_TFT
 	-D CORE_DEBUG_LEVEL=0
 	-D ARDUINO_USB_MODE=0
 	-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
@@ -254,8 +256,9 @@ build_flags =
 	-D SERIAL_FLASHER_INTERFACE_UART=1
 	-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
 	-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
+	-D C6_OTA_FLASHING
 build_src_filter = 
-	+<*>-<usbflasher.cpp>-<swd.cpp>
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
 board_build.flash_mode=qio
 board_build.arduino.memory_type = qio_opi
 board_build.psram_type=qspi_opi
@@ -302,7 +305,7 @@ build_flags =
 	-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
 	-D C6_OTA_FLASHING
 build_src_filter = 
-	+<*>-<usbflasher.cpp>-<swd.cpp>
+	+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
 board_build.flash_mode=qio
 board_build.arduino.memory_type = qio_opi
 board_build.psram_type=qspi_opi
@@ -348,12 +351,102 @@ build_flags =
 	-D SD_CARD_MOSI=14
 	-D SD_CARD_SS=12
 build_src_filter = 
-   +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
+   +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<webflasher.cpp>
 board_build.flash_mode=qio
 board_upload.maximum_size = 16777216
 board_upload.maximum_ram_size = 327680
 board_upload.flash_size = 16MB
 ; ----------------------------------------------------------------------------------------
+; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
+; ----------------------------------------------------------------------------------------
+[env:OpenEPaperLink_Mini_AP_v4]
+board = esp32-s3-devkitc-1
+board_build.partitions = large_spiffs_16MB.csv
+monitor_dtr = 0
+monitor_rts = 0
+build_unflags =
+	-std=gnu++11
+    -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
+	-D ILI9341_DRIVER
+lib_deps =
+    ${env.lib_deps}
+build_flags = 
+	-std=gnu++17
+	${env.build_flags}
+	-D HAS_TFT
+	-D HAS_EXT_FLASHER
+	-D CORE_DEBUG_LEVEL=1
+    -D ARDUINO_USB_CDC_ON_BOOT=1
+	-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
+	-D CONFIG_SPIRAM_USE_MALLOC=1
+	-D POWER_NO_SOFT_POWER
+	-D BOARD_HAS_PSRAM
+	-D POWER_RAMPING
+	-D POWER_HIGH_SIDE_DRIVER
+	-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
+	-D FLASHER_AP_SS=-1
+	-D FLASHER_AP_CLK=-1
+	-D FLASHER_AP_MOSI=-1
+	-D FLASHER_AP_MISO=-1
+	-D FLASHER_AP_RESET=47
+	-D FLASHER_AP_POWER={-1}
+	-D FLASHER_AP_TEST=-1
+	-D FLASHER_AP_TXD=17
+	-D FLASHER_AP_RXD=18
+	-D FLASHER_DEBUG_TXD=15
+	-D FLASHER_DEBUG_RXD=7
+	-D FLASHER_DEBUG_PROG=21
+	-D FLASHER_LED=16
+	-D FLASHER_EXT_SS=40
+	-D FLASHER_EXT_CLK=41
+	-D FLASHER_EXT_MOSI=2
+	-D FLASHER_EXT_MISO=42
+	-D FLASHER_EXT_RESET=5
+	-D FLASHER_EXT_POWER={6}
+	-D FLASHER_EXT_TXD=38
+	-D FLASHER_EXT_RXD=39
+	-D FLASHER_EXT_TEST=4
+	-D FLASHER_ALT_SS=-1
+	-D FLASHER_ALT_CLK=-1
+	-D FLASHER_ALT_MOSI=-1
+	-D FLASHER_ALT_MISO=-1
+	-D FLASHER_ALT_RESET=-1
+	-D FLASHER_ALT_POWER={-1}
+	-D FLASHER_ALT_TXD=-1
+	-D FLASHER_ALT_RXD=-1
+	-D FLASHER_ALT_TEST=-1
+	-D HAS_RGB_LED
+	-D FLASHER_RGB_LED=48
+	-D ST7735_DRIVER
+	-D ST7735_GREENTAB160x80
+	-D TFT_INVERSION_ON
+	-D TFT_WIDTH=80
+	-D TFT_HEIGHT=160
+	-D TFT_MISO=-1
+	-D TFT_MOSI=13
+	-D TFT_SCLK=12
+	-D TFT_CS=10
+	-D TFT_DC=11
+	-D TFT_RST=1
+	-D TFT_RGB_ORDER=TFT_BGR
+	-D USE_HSPI_PORT
+	-D LOAD_FONT2
+	-D LOAD_FONT4
+	-D LOAD_GLCD
+	-D MD5_ENABLED=1
+	-D SERIAL_FLASHER_INTERFACE_UART=1
+	-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
+	-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
+	-D C6_OTA_FLASHING
+build_src_filter = 
+	+<*>
+board_build.flash_mode=qio
+board_build.arduino.memory_type = qio_opi
+board_build.psram_type=qspi_opi
+board_upload.maximum_size = 16777216
+board_upload.maximum_ram_size = 327680
+board_upload.flash_size = 16MB
+; ----------------------------------------------------------------------------------------
 ; !!! this configuration expects an SONOFF ZB Bridge-P
 ; ----------------------------------------------------------------------------------------
 ;[env:Sonoff_zb_bridge_P_AP]