* updated arduinojson to version 7.3.0, enabled comments within json files
* update ESPAsyncWebServer/AsyncTCP to the ESP32Async fork
ESP32Async/ESPAsyncWebServer and ESP32Async/AsyncTCP are much better maintained and it looks like a lot of bugs are fixed compared to the ESPHome version we used before.
* Arduino 3.x compatibility (while maintaining 2.x compatibility)
- added last updated time of a tag in tagdb
- day ahead prices choice of whole money units or cents
- optimization of file upload during updates
- show mac address in wifi setup
- fixed reload of display after unexpected reboot of tag
- adds tag serial debug in webflasher and power up/down buttons
- fixes bug where esp32-s3 connected via usb cdc slows down when no terminal connection is present
- fix: ghost tags reporting a different channel id than the AP are now ignored
- webflasher now ramps up/down power to prevent spikes
- bugfix: C6 doesn't get reset anoymore by the watchdog during flashing
- bugfix: C6 could go in flash mode unintended
- a failed connection during swd write blocks is now reported back instead of silently ignored
- added 4 areas of Sweden to day ahead price content
- new context menu option 'Delete all inactive tags' (only when right clicking on an inactive tag).
- adjusted some timings
- added webinterface for tag flasher
- added tcp transport for communicating with tag flasher (OTG USB also still works)
- added content 'timestamp', makes use of preloaded images and buttons on the 2.9" M3
- webinterface is now aware of C6 and flasher capabilities
- AP can run without ieee801.15.4 radio (i.e. flasher only) by shorting FLASHER_AP_TXD and FLASHER_AP_RXD
- added tcp transport option to OEPL-Flasher.py (serial also still works)
- added new environment OpenEPaperLink_Mini_AP_v4
- lots of finetuning and bug fixes
- Added Signika-SB.ttf and some small bitmap fonts
- Removed calibrib50/60/80/100/120/150 bitmap fonts, as they can be better rendered using truetype. Fallback is in place to auto translate to Signika-SB.ttf with the right size in case it is still used in a json template
- Renamed confusing tag type names to 'M2 + size' and 'M3 + size'. Because the universal firmware, there is no need to tell every subtile type change apart anymore.
- added `textbox` to json templates (https://github.com/jjwbruijn/OpenEPaperLink/wiki/Json-template#paragraph-text)
- redesign of count days/hours
- redesign of RSS feed
- designed Buienradar for more tag sizes
- on a scheduled or user initiated reboot, 'REBOOTING' is sent to the error channel of the websockets just before the connection is dropped
- phased out "hwtype": [] in content_cards.json (new location is in the tagtype json, which contains a list of valid content types)
In case of problems using this commit: keep in mind the heavy caching of the tagtypes in the browser. You might still unknowingly use the old contents.
- prevent using html file for tag firmware update
- removed excessive logging
- fallback to .bak on tagDB load error
- scheduled reboot once at night around 4:00
- neopixel idle color now represents AP status
- option to invert colors (advanced options at tag card)
- filename dropdown in tag card when a filename is expected
- redrawing pending instead of raw, if previews are off and tag reboots
- tft brightness setting independent from neopixel brightness
To flash the C6, place bootloader.bin, partition-table.bin and OpenEPaperLink_esp32_C6.bin in the file system root.
APconfig -> update -> advanced options -> update ESP32-C6
This should also work with a previous unconfigured C6.
Compatible with Yellow-AP.
- clean up webproxy getExtUrl
- bugfix init multicast on wifi reconnect
- add ip address of remote AP that's taken over a tag
- renamed button 'edit contentFS' to 'file system'
To be able to store more images and never worry about running
out of storage again we are adding support of SDCards.
We are faced with two options:
1) Remove the LittleFS code
2) Allow for both FSs but increase the app partition as we run
out of space.
We have opted for 2 for two reasons:
1) Unformated SDCards can be initialized from the littleFS
2) If the SDCard and the flasher share the same SPI pins
the SDCard needs to be completely disconnected so there needs
to be a FS in that rare case.
Performance wise the SDCard is not slowing the system down.
Writing the AP db with 70 APs takes 2.5 seconds, on the SD
only 800ms. This however is SD and setup depending.
By default the SDCard is expected on pins 18,19,23 however this
is configurable via preprocessor defines.
Globally we replace LittleFS with a new pointer to the currently
used FS allowing for hotswapping where the FS pointer is not saved.
One case which is therefore not working is the SPIFSEditor which
copies the FS interally.
Signed-off-by: Mimoja <git@mimoja.de>
- fonts re-rendered: added äöüßÄÖÜ.
- shuffled a bit with fonts to optimize disk usage
- ability to delete files during OTA
- prettify tagDB.json
- error handling in get_DB
- small cosmetic changes
* Due to new ability to delete files: After firmware update via OTA, please perform an OTA update of the filesystem again to perform the deletion of unneeded fonts.
* If updating via platform.io: don't forget to update the filesystem image.
