starred/OpenEPaperLink
1
0
Fork 0
mirror of https://github.com/OpenEPaperLink/OpenEPaperLink.git synced 2026-03-21 09:04:24 +01:00
Code Issues 1.0k Packages Projects Releases 10 Wiki Activity
Files
447611ba4ab0c356e701ab27a8af0ec28b514bba
OpenEPaperLink/ESP32_AP-Flasher/platformio.ini
Skip Hansen 447611ba4a Added support for Elcrow Advanced 2.8" AP.
2025-03-25 10:02:39 -07:00

1198 lines
34 KiB
INI
Raw Blame History

; Try to not create new configs if possible, if in doubt, please ask
; OTA on the official repo will only be published for mass-produced APs, feel free to experiment on your own fork
[env]
; Choose below between platformio/espressif32 (Arduino 2.x) and pioarduino (Arduino 3.x)
platform = platformio/espressif32@^6.10.0
;platform = https://github.com/pioarduino/platform-espressif32/releases/download/stable/platform-espressif32.zip
framework = arduino
lib_deps =
ESP32Async/AsyncTCP
ESP32Async/ESPAsyncWebServer
bblanchon/ArduinoJson
bodmer/TFT_eSPI
https://github.com/Bodmer/TJpg_Decoder.git
https://github.com/nlimper/shoddyxml2#d19a4e5
https://github.com/nlimper/QRCodeGenerator
fastled/FastLED@3.9.13
https://github.com/MajenkoLibraries/SoftSPI
board_build.filesystem = littlefs
monitor_filters = esp32_exception_decoder
monitor_speed = 115200
board_build.f_cpu = 240000000L
build_unflags =
-std=gnu++11
build_flags =
-std=gnu++17
-D BUILD_ENV_NAME=$PIOENV
-D BUILD_TIME=$UNIX_TIME
-D USER_SETUP_LOADED
-D DISABLE_ALL_LIBRARY_WARNINGS
-D ILI9341_DRIVER
-D SMOOTH_FONT
-D ARDUINOJSON_ENABLE_COMMENTS=1
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the 16MB Flash / 8MB Ram version of the ESP32-S3-DevkitC1
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_AP_and_Flasher]
platform = https://github.com/platformio/platform-espressif32.git
board = esp32-s3-devkitc-1
board_build.partitions = default_16MB.csv
build_unflags =
-std=gnu++11
-D ARDUINO_USB_MODE=1
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_EXT_FLASHER
-D ARDUINO_USB_MODE=0
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D HAS_USB
-D HAS_RGB_LED
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D POWER_RAMPING
-D POWER_HIGH_SIDE_DRIVER
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=4
-D FLASHER_AP_CLK=5
-D FLASHER_AP_MOSI=7
-D FLASHER_AP_MISO=6
-D FLASHER_AP_RESET=15
-D FLASHER_AP_POWER={0}
-D FLASHER_AP_TXD=16
-D FLASHER_AP_RXD=18
-D FLASHER_AP_TEST=17
-D FLASHER_EXT_SS=40
-D FLASHER_EXT_CLK=41
-D FLASHER_EXT_MOSI=2
-D FLASHER_EXT_MISO=42
-D FLASHER_EXT_RESET=1
-D FLASHER_EXT_POWER={8}
-D FLASHER_EXT_TXD=38
-D FLASHER_EXT_RXD=39
-D FLASHER_EXT_TEST=47
-D FLASHER_ALT_SS=3
-D FLASHER_ALT_CLK=46
-D FLASHER_ALT_MOSI=10
-D FLASHER_ALT_MISO=9
-D FLASHER_ALT_RESET=11
-D FLASHER_ALT_POWER={-1}
-D FLASHER_ALT_TXD=12
-D FLASHER_ALT_RXD=14
-D FLASHER_ALT_TEST=13
-D FLASHER_LED=21
-D FLASHER_RGB_LED=48
build_src_filter =
+<*>-<espflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_16_8_YELLOW_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D ARDUINO_USB_MODE=1
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-D ILI9341_DRIVER
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_MODE=0
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=17
-D FLASHER_AP_RXD=18
-D FLASHER_DEBUG_TXD=19
-D FLASHER_DEBUG_RXD=20
-D FLASHER_DEBUG_PROG=21
-D FLASHER_LED=16
-D HAS_RGB_LED
-D FLASHER_RGB_LED=48
-D ST7789_DRIVER
-D TFT_WIDTH=172
-D TFT_HEIGHT=320
-D TFT_MISO=-1
-D TFT_MOSI=13
-D TFT_SCLK=12
-D TFT_CS=10
-D TFT_DC=11
-D TFT_RST=1
-D TFT_RGB_ORDER=TFT_BGR
-D USE_HSPI_PORT
-D LOAD_FONT2
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_16_8_LILYGO_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
monitor_dtr = 0
monitor_rts = 0
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;-D ILI9341_DRIVER
lib_deps = ${env.lib_deps}
lib_extra_dirs = lib2/Arduino_GFX-1.3.7
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D HAS_LILYGO_TPANEL
-D CORE_DEBUG_LEVEL=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=34
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
; NB: FLASHER_DEBUG_TXD and FLASHER_DEBUG_RXD use the same pins as
; FLASHER_AP_TXD and FLASHER_AP_RXD but the naming convention is different
-D FLASHER_DEBUG_SHARED
-D FLASHER_DEBUG_PORT=1
-D FLASHER_AP_TXD=48
-D FLASHER_DEBUG_RXD=48
-D FLASHER_AP_RXD=47
-D FLASHER_DEBUG_TXD=47
;
-D FLASHER_DEBUG_PROG=33
-D FLASHER_LED=-1
-D TFT_HEIGHT=480
-D TFT_HW_TYPE=226
-D USE_HSPI_PORT
-D LOAD_FONT2
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=200
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=200
-D HAS_H2
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_qspi ;Enable external PSRAM
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_16_8_4inch_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
monitor_dtr = 0
monitor_rts = 0
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
lib_deps = ${env.lib_deps}
lib_extra_dirs = lib2/Arduino_GFX-1.3.7
lib2/gt911-touch
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D HAS_4inch_TPANEL
-D HAS_GT911_TOUCH
-D CORE_DEBUG_LEVEL=1
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=1
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
; NB: FLASHER_DEBUG_TXD and FLASHER_DEBUG_RXD use the same pins as
; FLASHER_AP_TXD and FLASHER_AP_RXD but the naming convention is different
-D FLASHER_DEBUG_SHARED
-D FLASHER_DEBUG_PORT=1
-D FLASHER_AP_TXD=40
-D FLASHER_AP_RXD=44
-D FLASHER_DEBUG_TXD=44
-D FLASHER_DEBUG_RXD=40
-D FLASHER_DEBUG_PROG=2
-D FLASHER_LED=-1
; In this case we only got one TX Pin and no RX so lets only use that.
-D UART_LOGGING_TX_ONLY_PIN=43
-D TFT_HEIGHT=480
-D TFT_HW_TYPE=226
-D USE_HSPI_PORT
-D LOAD_FONT2
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=200
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=200
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi ;Enable external PSRAM
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_C6_BIG_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_BLE_WRITER
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=13
-D FLASHER_AP_RXD=14
-D FLASHER_DEBUG_SWS=21
-D FLASHER_DEBUG_TXD=15
-D FLASHER_DEBUG_RXD=16
-D FLASHER_DEBUG_PROG=7
-D FLASHER_LED=38
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
-D C6_OTA_FLASHING
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_C6_NANO_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_BLE_WRITER
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=14
-D FLASHER_AP_RXD=13
-D FLASHER_DEBUG_TXD=12
-D FLASHER_DEBUG_RXD=11
-D FLASHER_DEBUG_PROG=21
-D FLASHER_LED=38
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_SIMPLE_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_BLE_WRITER
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=41
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=2
-D FLASHER_AP_RXD=1
-D FLASHER_DEBUG_TXD=12
-D FLASHER_DEBUG_RXD=11
-D FLASHER_DEBUG_PROG=40
-D FLASHER_LED=38
-D HAS_RGB_LED
-D FLASHER_RGB_LED=48
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_Nano_TLSR]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-D ILI9341_DRIVER
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D CORE_DEBUG_LEVEL=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=17
-D FLASHER_AP_RXD=18
-D FLASHER_DEBUG_SWS=21
-D FLASHER_DEBUG_TXD=15
-D FLASHER_DEBUG_RXD=7
-D FLASHER_DEBUG_PROG=6
-D FLASHER_LED=16
-D ST7735_NANO_TLSR
-D ST7735_DRIVER
-D ST7735_GREENTAB160x80
-D TFT_INVERSION_ON
-D TFT_WIDTH=80
-D TFT_HEIGHT=160
-D TFT_MISO=-1
-D TFT_MOSI=13
-D TFT_SCLK=12
-D TFT_CS=10
-D TFT_DC=11
-D TFT_RST=1
-D TFT_RGB_ORDER=TFT_BGR
-D USE_HSPI_PORT
-D LOAD_FONT2
-D LOAD_FONT4
-D LOAD_GLCD
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=200
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=200
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_Nano_TLSR_C6]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-D ILI9341_DRIVER
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D CORE_DEBUG_LEVEL=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=15
-D FLASHER_AP_RXD=7
-D FLASHER_DEBUG_SWS=21
-D FLASHER_DEBUG_TXD=18
-D FLASHER_DEBUG_RXD=17
-D FLASHER_DEBUG_PROG=6
-D FLASHER_LED=16
-D ST7735_NANO_TLSR
-D ST7735_DRIVER
-D ST7735_GREENTAB160x80
-D TFT_INVERSION_ON
-D TFT_WIDTH=80
-D TFT_HEIGHT=160
-D TFT_MISO=-1
-D TFT_MOSI=13
-D TFT_SCLK=12
-D TFT_CS=10
-D TFT_DC=11
-D TFT_RST=1
-D TFT_RGB_ORDER=TFT_BGR
-D USE_HSPI_PORT
-D LOAD_FONT2
-D LOAD_FONT4
-D LOAD_GLCD
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=200
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=200
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:BLE_ONLY_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D ARDUINO_USB_MODE=1
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_MODE=0
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=-1
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=-1
-D FLASHER_AP_RXD=-1
-D FLASHER_DEBUG_TXD=-1
-D FLASHER_DEBUG_RXD=-1
-D FLASHER_DEBUG_PROG=-1
-D FLASHER_LED=-1
-D HAS_RGB_LED
-D FLASHER_RGB_LED=48
-D BLE_ONLY
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>-<espflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the PoE-AP and is work in progress right now !!!
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_PoE_AP]
platform = https://github.com/platformio/platform-espressif32.git
board=esp32dev
board_build.partitions = 16MB_partition table.csv
build_unflags =
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-std=gnu++11
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D OPENEPAPERLINK_POE_AP_PCB
-D CONFIG_SPIRAM_USE_MALLOC=1
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_RGB_LED
-D BOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-D HAS_SDCARD
-D POWER_NO_SOFT_POWER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=-1
-D FLASHER_AP_POWER={-1} ;this board has no soft power control
-D FLASHER_AP_TXD=15
-D FLASHER_AP_RXD=4
-D FLASHER_AP_TEST=-1
-D FLASHER_LED=-1
-D FLASHER_RGB_LED=5
-D SD_CARD_CLK=13
-D SD_CARD_MISO=36
-D SD_CARD_MOSI=14
-D SD_CARD_SS=12
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_Mini_AP_v4]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
monitor_dtr = 0
monitor_rts = 0
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-D ILI9341_DRIVER
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D HAS_EXT_FLASHER
-D CORE_DEBUG_LEVEL=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D POWER_RAMPING
-D POWER_HIGH_SIDE_DRIVER
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=17
-D FLASHER_AP_RXD=18
-D FLASHER_DEBUG_TXD=15
-D FLASHER_DEBUG_RXD=7
-D FLASHER_DEBUG_PROG=21
-D FLASHER_LED=16
-D FLASHER_EXT_SS=40
-D FLASHER_EXT_CLK=41
-D FLASHER_EXT_MOSI=2
-D FLASHER_EXT_MISO=42
-D FLASHER_EXT_RESET=5
-D FLASHER_EXT_POWER={6}
-D FLASHER_EXT_TXD=38
-D FLASHER_EXT_RXD=39
-D FLASHER_EXT_TEST=4
-D FLASHER_ALT_SS=-1
-D FLASHER_ALT_CLK=-1
-D FLASHER_ALT_MOSI=-1
-D FLASHER_ALT_MISO=-1
-D FLASHER_ALT_RESET=-1
-D FLASHER_ALT_POWER={-1}
-D FLASHER_ALT_TXD=-1
-D FLASHER_ALT_RXD=-1
-D FLASHER_ALT_TEST=-1
-D HAS_RGB_LED
-D FLASHER_RGB_LED=48
-D ST7735_DRIVER
-D ST7735_GREENTAB160x80
-D TFT_INVERSION_ON
-D TFT_WIDTH=80
-D TFT_HEIGHT=160
-D TFT_MISO=-1
-D TFT_MOSI=13
-D TFT_SCLK=12
-D TFT_CS=10
-D TFT_DC=11
-D TFT_RST=1
-D TFT_RGB_ORDER=TFT_BGR
-D USE_HSPI_PORT
-D LOAD_FONT2
-D LOAD_FONT4
-D LOAD_GLCD
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=200
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=200
-D C6_OTA_FLASHING
-D HAS_SUBGHZ
build_src_filter =
+<*>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_16_8_ELECROW_ADV_2_8]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D ARDUINO_USB_MODE=1
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-D ILI9341_DRIVER
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D HAS_TFT
-D HAS_ELECROW_ADV_2_8
-D HAS_ELECROW_C6
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_MODE=0
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_BLE_WRITER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=46
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=9
-D FLASHER_AP_RXD=10
-D FLASHER_DEBUG_TXD=2
-D FLASHER_DEBUG_RXD=1
-D FLASHER_DEBUG_PROG=3
-D FLASHER_LED=-1
-D ST7789_DRIVER
-D TFT_WIDTH=240
-D TFT_HEIGHT=320
-D TFT_HW_TYPE=229
-D TFT_MISO=-1
-D TFT_MOSI=39
-D TFT_SCLK=42
-D TFT_CS=40
-D TFT_DC=41
-D TFT_RST=-1
-D TFT_RGB_ORDER=TFT_BGR
-D USE_HSPI_PORT
-D LOAD_FONT2
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
-D C6_OTA_FLASHING
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an SONOFF ZB Bridge-P
; ----------------------------------------------------------------------------------------
;[env:Sonoff_zb_bridge_P_AP]
;board = esp32dev
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D POWER_NO_SOFT_POWER
; -DBOARD_HAS_PSRAM
; -mfix-esp32-psram-cache-issue
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=-1
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=19
; -D FLASHER_AP_RXD=23
; -D FLASHER_LED=2
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the UniRfInterface PCB with EBYTE E79 CC1352P Module
; ----------------------------------------------------------------------------------------
;[env:OpenEPaperLink_CC1352P]
;platform = https://github.com/platformio/platform-espressif32.git
;board=lolin_s2_mini
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OPENEPAPERLINK_MINI_AP_PCB
; -D ARDUINO_USB_MODE=0
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D BOARD_HAS_PSRAM
; -D POWER_NO_SOFT_POWER
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=21
; -D FLASHER_AP_POWER={-1} ;this board has no soft power control
; -D FLASHER_AP_TXD=17
; -D FLASHER_AP_RXD=16
; -D FLASHER_AP_TEST=-1
; -D FLASHER_LED=2
; -D FLASHER_RGB_LED=-1
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration is work in progress, do not use for now
; ----------------------------------------------------------------------------------------
;[env:OutdoorAP]
;board = esp32-s3-devkitc-1
;board_build.partitions = 32MB_partition table.csv
;build_unflags =
; -std=gnu++11
; -D ARDUINO_USB_MODE=1
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OutdoorAP
; -D HAS_RGB_LED
; -D CORE_DEBUG_LEVEL=0
; -D ARDUINO_USB_MODE=0
; -D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D POWER_NO_SOFT_POWER
; -D BOARD_HAS_PSRAM
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=47
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=17
; -D FLASHER_AP_RXD=18
; -D FLASHER_LED=21
; -D FLASHER_RGB_LED=38
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.flash_mode=opi
;board_build.arduino.memory_type = opi_opi
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 16777216
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 32MB
;#upload_flags = --no-stub
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an wemos_d1_mini32
; ----------------------------------------------------------------------------------------
;[env:Wemos_d1_mini32_AP]
;board = wemos_d1_mini32
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D POWER_NO_SOFT_POWER
; -D FLASHER_AP_SS=5
; -D FLASHER_AP_CLK=18
; -D FLASHER_AP_MOSI=23
; -D FLASHER_AP_MISO=19
; -D FLASHER_AP_RESET=14
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=16
; -D FLASHER_AP_RXD=17
; -D FLASHER_LED=22
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an m5stack esp32
; ----------------------------------------------------------------------------------------
;[env:M5Stack_Core_ONE_AP]
;platform = espressif32
;board = m5stack-core-esp32
;board_build.partitions = esp32_sdcard.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D POWER_NO_SOFT_POWER
; -D HAS_SDCARD
; -D USE_SOFTSPI
; -D SD_CARD_SS=4
; -D SD_CARD_CLK=18
; -D SD_CARD_MISO=19
; -D SD_CARD_MOSI=23
; -D FLASHER_AP_SS=5
; -D FLASHER_AP_CLK=36
; -D FLASHER_AP_MOSI=26
; -D FLASHER_AP_MISO=35
; -D FLASHER_AP_RESET=2
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=16
; -D FLASHER_AP_RXD=17
; -D FLASHER_LED=-1
; -D FLASH_TIMEOUT=10
; -D USER_SETUP_LOADED
; -D DISABLE_ALL_LIBRARY_WARNINGS
; -D ILI9341_DRIVER
; -D SMOOTH_FONT
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the Nano_C6
; ----------------------------------------------------------------------------------------
;[env:OpenEPaperLink_Nano_C6]
;platform = https://github.com/platformio/platform-espressif32.git
;board=lolin_s2_mini
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OPENEPAPERLINK_NANO_AP_PCB
; -D ARDUINO_USB_MODE=0
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D POWER_NO_SOFT_POWER
; -D BOARD_HAS_PSRAM
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=39
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=35
; -D FLASHER_AP_RXD=33
; -D FLASHER_LED=15
; -D FLASHER_RGB_LED=-1
; -D MD5_ENABLED=1
; -D SERIAL_FLASHER_INTERFACE_UART=1
; -D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
; -D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! Release 2.75 was the last release that supported ESP32-S2 based APs or ESP32-S3 APs
; !!! with less than 16Mb flash and 8MB RAM.
; ----------------------------------------------------------------------------------------
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the Mini_AP (deprecated)
; ----------------------------------------------------------------------------------------
;[env:OpenEPaperLink_Mini_AP]
;platform = https://github.com/platformio/platform-espressif32.git
;board=lolin_s2_mini
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OPENEPAPERLINK_MINI_AP_PCB
; -D ARDUINO_USB_MODE=0
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D HAS_RGB_LED
; -D BOARD_HAS_PSRAM
; -D SAVE_SPACE
; -D POWER_NO_SOFT_POWER
; -D FLASHER_AP_SS=11
; -D FLASHER_AP_CLK=9
; -D FLASHER_AP_MOSI=10
; -D FLASHER_AP_MISO=8
; -D FLASHER_AP_RESET=13
; -D FLASHER_AP_POWER={-1} ;this board has no soft power control
; -D FLASHER_AP_TXD=7
; -D FLASHER_AP_RXD=6
; -D FLASHER_AP_TEST=12
; -D FLASHER_LED=15
; -D FLASHER_RGB_LED=33
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the Nano_AP
; ----------------------------------------------------------------------------------------
;[env:OpenEPaperLink_Nano_AP]
;platform = https://github.com/platformio/platform-espressif32.git
;board=lolin_s2_mini
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OPENEPAPERLINK_NANO_AP_PCB
; -D ARDUINO_USB_MODE=0
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D BOARD_HAS_PSRAM
; -D SAVE_SPACE
; -D FLASHER_AP_SS=38
; -D FLASHER_AP_CLK=40
; -D FLASHER_AP_MOSI=39
; -D FLASHER_AP_MISO=33
; -D FLASHER_AP_RESET=37
; -D FLASHER_AP_POWER={16,17,18,21}
; -D FLASHER_AP_TXD=35
; -D FLASHER_AP_RXD=34
; -D FLASHER_AP_TEST=36
; -D FLASHER_LED=15
; -D FLASHER_RGB_LED=-1
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
;; ----------------------------------------------------------------------------------------
;; !!! this configuration expects an esp32 (deprecated)
;; ----------------------------------------------------------------------------------------
;[env:Simple_AP]
;board = esp32dev
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D SIMPLE_AP
; -D SAVE_SPACE
; -D FLASHER_AP_SS=5
; -D FLASHER_AP_CLK=18
; -D FLASHER_AP_MOSI=23
; -D FLASHER_AP_MISO=19
; -D FLASHER_AP_RESET=2
; -D FLASHER_AP_POWER={13,15}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=17
; -D FLASHER_AP_RXD=16
; -D FLASHER_LED=22
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
;
;; ----------------------------------------------------------------------------------------
;; !!! this configuration expects an ESP32-S3 4MB Flash 2MB RAM aka The Official Espressif Zigbee Gateway PCB (deprecated)
;; ----------------------------------------------------------------------------------------
;[env:ESP_THREAD_BORDER_ROUTER]
;board = esp32-s3-devkitc-1
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;lib_deps =
; ${env.lib_deps}
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; ;-D HAS_BLE_WRITER
; -D CORE_DEBUG_LEVEL=0
; -D ARDUINO_USB_CDC_ON_BOOT
; -D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D POWER_NO_SOFT_POWER
; -D BOARD_HAS_PSRAM
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=7
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=4
; -D FLASHER_AP_RXD=5
; -D FLASHER_DEBUG_TXD=17
; -D FLASHER_DEBUG_RXD=18
; -D FLASHER_DEBUG_PROG=8
; -D FLASHER_LED=-1
; -D MD5_ENABLED=1
; -D SERIAL_FLASHER_INTERFACE_UART=1
; -D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
; -D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
; -D C6_OTA_FLASHING
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
;
Reference in New Issue View Git Blame Copy Permalink