starred/OpenEPaperLink
1
0
Fork 0
mirror of https://github.com/OpenEPaperLink/OpenEPaperLink.git synced 2026-03-21 05:06:39 +01:00
Code Issues 767 Packages Projects Releases 10 Wiki Activity
Files
83bd0ec17721528cddc7d4e44da8888095462bfd
OpenEPaperLink/ESP32_AP-Flasher/platformio.ini
Nic Limper 83bd0ec177 stability improvements 
- changed ESPAsyncWebServer and AsyncTCP (both not properly maintained for more than 5 years) to more recent fork with bugfixes
- fixed concurrency issues in /imgupload. Hurts the upload performance a lot, but probably that's not a real issue. Parallel uploads are now possible (still within the max 5 TCP connection limit)
2024-01-21 11:04:35 +01:00

564 lines
17 KiB
INI
Raw Blame History

; Try to not create new configs if possible, if in doubt, please ask
; OTA on the official repo will only be published for mass-produced APs, feel free to experiment on your own fork
[env]
platform = espressif32
framework = arduino
lib_deps =
; original ESPAsyncWebServer
; https://github.com/me-no-dev/ESPAsyncWebServer
; alternative AsyncTCP + ESPAsyncwebserver fork
https://github.com/yubox-node-org/ESPAsyncWebServer#yuboxfixes-0xFEEDC0DE64-cleanup
https://github.com/yubox-node-org/AsyncTCPSock
bblanchon/ArduinoJson@^6.19.4
bodmer/TFT_eSPI
https://github.com/Bodmer/TJpg_Decoder.git
https://github.com/nlimper/shoddyxml2
https://github.com/nlimper/QRCodeGenerator
fastled/FastLED
https://github.com/MajenkoLibraries/SoftSPI
lib_ignore =
; Replaced with better version (AsyncTCPSock)
AsyncTCP
platform_packages =
board_build.filesystem = littlefs
monitor_filters = esp32_exception_decoder
monitor_speed = 115200
board_build.f_cpu = 240000000L
build_unflags =
-std=gnu++11
build_flags =
-std=gnu++17
-D BUILD_ENV_NAME=$PIOENV
-D BUILD_TIME=$UNIX_TIME
-D USER_SETUP_LOADED
-D DISABLE_ALL_LIBRARY_WARNINGS
-D ILI9341_DRIVER
-D SMOOTH_FONT
;upload_port = COM11
;monitor_port = COM11
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the Mini_AP
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_Mini_AP]
platform = https://github.com/platformio/platform-espressif32.git
board=lolin_s2_mini
board_build.partitions = default.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
build_flags =
-std=gnu++17
${env.build_flags}
-D OPENEPAPERLINK_MINI_AP_PCB
-D ARDUINO_USB_MODE=0
-D CONFIG_SPIRAM_USE_MALLOC=1
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_RGB_LED
-D BOARD_HAS_PSRAM
-D POWER_NO_SOFT_POWER
-D FLASHER_AP_SS=11
-D FLASHER_AP_CLK=9
-D FLASHER_AP_MOSI=10
-D FLASHER_AP_MISO=8
-D FLASHER_AP_RESET=13
-D FLASHER_AP_POWER={-1} ;this board has no soft power control
-D FLASHER_AP_TXD=7
-D FLASHER_AP_RXD=6
-D FLASHER_AP_TEST=12
-D FLASHER_LED=15
-D FLASHER_RGB_LED=33
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>
board_build.psram_type=qspi_opi
board_upload.maximum_size = 4194304
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the Nano_AP
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_Nano_AP]
platform = https://github.com/platformio/platform-espressif32.git
board=lolin_s2_mini
board_build.partitions = default.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
build_flags =
-std=gnu++17
${env.build_flags}
-D OPENEPAPERLINK_NANO_AP_PCB
-D ARDUINO_USB_MODE=0
-D CONFIG_SPIRAM_USE_MALLOC=1
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D BOARD_HAS_PSRAM
-D FLASHER_AP_SS=38
-D FLASHER_AP_CLK=40
-D FLASHER_AP_MOSI=39
-D FLASHER_AP_MISO=33
-D FLASHER_AP_RESET=37
-D FLASHER_AP_POWER={16,17,18,21}
-D FLASHER_AP_TXD=35
-D FLASHER_AP_RXD=34
-D FLASHER_AP_TEST=36
-D FLASHER_LED=15
-D FLASHER_RGB_LED=-1
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>
board_build.psram_type=qspi_opi
board_upload.maximum_size = 4194304
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the 16MB Flash / 8MB Ram version of the ESP32-S3-DevkitC1
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_AP_and_Flasher]
platform = https://github.com/platformio/platform-espressif32.git
board = esp32-s3-devkitc-1
board_build.partitions = default_16MB.csv
build_unflags =
-std=gnu++11
-D ARDUINO_USB_MODE=1
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
build_flags =
-std=gnu++17
${env.build_flags}
-D OPENEPAPERLINK_PCB
-D ARDUINO_USB_MODE=0
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D HAS_USB
-D HAS_RGB_LED
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D POWER_RAMPING
-D POWER_HIGH_SIDE_DRIVER
-D FLASHER_AP_SS=4
-D FLASHER_AP_CLK=5
-D FLASHER_AP_MOSI=7
-D FLASHER_AP_MISO=6
-D FLASHER_AP_RESET=15
-D FLASHER_AP_POWER={0}
-D FLASHER_AP_TXD=16
-D FLASHER_AP_RXD=18
-D FLASHER_AP_TEST=17
-D FLASHER_EXT_SS=40
-D FLASHER_EXT_CLK=41
-D FLASHER_EXT_MOSI=2
-D FLASHER_EXT_MISO=42
-D FLASHER_EXT_RESET=1
-D FLASHER_EXT_POWER={8}
-D FLASHER_EXT_TXD=38
-D FLASHER_EXT_RXD=39
-D FLASHER_EXT_TEST=47
-D FLASHER_ALT_SS=3
-D FLASHER_ALT_CLK=46
-D FLASHER_ALT_MOSI=10
-D FLASHER_ALT_MISO=9
-D FLASHER_ALT_RESET=11
-D FLASHER_ALT_POWER={-1}
-D FLASHER_ALT_TXD=12
-D FLASHER_ALT_RXD=14
-D FLASHER_ALT_TEST=13
-D FLASHER_LED=21
-D FLASHER_RGB_LED=48
build_src_filter =
+<*>-<espflasher.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an esp32 (depricated)
; ----------------------------------------------------------------------------------------
[env:Simple_AP]
board = esp32dev
board_build.partitions = default.csv
build_unflags =
-std=gnu++11
build_flags =
-std=gnu++17
${env.build_flags}
-D CORE_DEBUG_LEVEL=0
-D SIMPLE_AP
-D FLASHER_AP_SS=5
-D FLASHER_AP_CLK=18
-D FLASHER_AP_MOSI=23
-D FLASHER_AP_MISO=19
-D FLASHER_AP_RESET=2
-D FLASHER_AP_POWER={13,15}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=17
-D FLASHER_AP_RXD=16
-D FLASHER_LED=22
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_16_8_YELLOW_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D ARDUINO_USB_MODE=1
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-D ILI9341_DRIVER
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D YELLOW_IPS_AP
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_MODE=0
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=17
-D FLASHER_AP_RXD=18
-D FLASHER_DEBUG_TXD=19
-D FLASHER_DEBUG_RXD=20
-D FLASHER_DEBUG_PROG=21
-D FLASHER_LED=16
-D HAS_RGB_LED
-D FLASHER_RGB_LED=48
-D ST7789_DRIVER
-D TFT_WIDTH=172
-D TFT_HEIGHT=320
-D TFT_MISO=-1
-D TFT_MOSI=13
-D TFT_SCLK=12
-D TFT_CS=10
-D TFT_DC=11
-D TFT_RST=1
-D TFT_RGB_ORDER=TFT_BGR
-D USE_HSPI_PORT
-D LOAD_FONT2
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
; ----------------------------------------------------------------------------------------
[env:ESP32_S3_C6_NANO_AP]
board = esp32-s3-devkitc-1
board_build.partitions = large_spiffs_16MB.csv
build_unflags =
-std=gnu++11
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
-D CONFIG_SPIRAM_USE_MALLOC=1
-D POWER_NO_SOFT_POWER
-D BOARD_HAS_PSRAM
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=47
-D FLASHER_AP_POWER={-1}
-D FLASHER_AP_TEST=-1
-D FLASHER_AP_TXD=14
-D FLASHER_AP_RXD=13
-D FLASHER_DEBUG_TXD=12
-D FLASHER_DEBUG_RXD=11
-D FLASHER_DEBUG_PROG=21
-D FLASHER_LED=38
-D MD5_ENABLED=1
-D SERIAL_FLASHER_INTERFACE_UART=1
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
-D C6_OTA_FLASHING
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>
board_build.flash_mode=qio
board_build.arduino.memory_type = qio_opi
board_build.psram_type=qspi_opi
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the PoE-AP and is work in progress right now !!!
; ----------------------------------------------------------------------------------------
[env:OpenEPaperLink_PoE_AP]
platform = https://github.com/platformio/platform-espressif32.git
board=esp32dev
board_build.partitions = 16MB_partition table.csv
build_unflags =
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-std=gnu++11
lib_deps =
${env.lib_deps}
build_flags =
-std=gnu++17
${env.build_flags}
-D OPENEPAPERLINK_POE_AP_PCB
-D CONFIG_SPIRAM_USE_MALLOC=1
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
-D HAS_RGB_LED
-D BOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-D HAS_SDCARD
-D POWER_NO_SOFT_POWER
-D FLASHER_AP_SS=-1
-D FLASHER_AP_CLK=-1
-D FLASHER_AP_MOSI=-1
-D FLASHER_AP_MISO=-1
-D FLASHER_AP_RESET=-1
-D FLASHER_AP_POWER={-1} ;this board has no soft power control
-D FLASHER_AP_TXD=15
-D FLASHER_AP_RXD=4
-D FLASHER_AP_TEST=-1
-D FLASHER_LED=-1
-D FLASHER_RGB_LED=5
-D SD_CARD_CLK=13
-D SD_CARD_MISO=36
-D SD_CARD_MOSI=14
-D SD_CARD_SS=12
build_src_filter =
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
board_build.flash_mode=qio
board_upload.maximum_size = 16777216
board_upload.maximum_ram_size = 327680
board_upload.flash_size = 16MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an SONOFF ZB Bridge-P
; ----------------------------------------------------------------------------------------
;[env:Sonoff_zb_bridge_P_AP]
;board = esp32dev
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D POWER_NO_SOFT_POWER
; -DBOARD_HAS_PSRAM
; -mfix-esp32-psram-cache-issue
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=-1
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=19
; -D FLASHER_AP_RXD=23
; -D FLASHER_LED=2
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the UniRfInterface PCB with EBYTE E79 CC1352P Module
; ----------------------------------------------------------------------------------------
;[env:OpenEPaperLink_CC1352P]
;platform = https://github.com/platformio/platform-espressif32.git
;board=lolin_s2_mini
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OPENEPAPERLINK_MINI_AP_PCB
; -D ARDUINO_USB_MODE=0
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D BOARD_HAS_PSRAM
; -D POWER_NO_SOFT_POWER
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=21
; -D FLASHER_AP_POWER={-1} ;this board has no soft power control
; -D FLASHER_AP_TXD=17
; -D FLASHER_AP_RXD=16
; -D FLASHER_AP_TEST=-1
; -D FLASHER_LED=2
; -D FLASHER_RGB_LED=-1
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
; ----------------------------------------------------------------------------------------
; !!! this configuration is work in progress, do not use for now
; ----------------------------------------------------------------------------------------
;[env:OutdoorAP]
;board = esp32-s3-devkitc-1
;board_build.partitions = 32MB_partition table.csv
;build_unflags =
; -std=gnu++11
; -D ARDUINO_USB_MODE=1
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OutdoorAP
; -D HAS_RGB_LED
; -D CORE_DEBUG_LEVEL=0
; -D ARDUINO_USB_MODE=0
; -D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D POWER_NO_SOFT_POWER
; -D BOARD_HAS_PSRAM
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=47
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=17
; -D FLASHER_AP_RXD=18
; -D FLASHER_LED=21
; -D FLASHER_RGB_LED=38
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.flash_mode=opi
;board_build.arduino.memory_type = opi_opi
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 16777216
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 32MB
#upload_flags = --no-stub
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an wemos_d1_mini32
; ----------------------------------------------------------------------------------------
;[env:Wemos_d1_mini32_AP]
;board = wemos_d1_mini32
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D POWER_NO_SOFT_POWER
; -D FLASHER_AP_SS=5
; -D FLASHER_AP_CLK=18
; -D FLASHER_AP_MOSI=23
; -D FLASHER_AP_MISO=19
; -D FLASHER_AP_RESET=14
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=16
; -D FLASHER_AP_RXD=17
; -D FLASHER_LED=22
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
; ----------------------------------------------------------------------------------------
; !!! this configuration expects an m5stack esp32
; ----------------------------------------------------------------------------------------
;[env:M5Stack_Core_ONE_AP]
;platform = espressif32
;board = m5stack-core-esp32
;board_build.partitions = esp32_sdcard.csv
;build_unflags =
; -std=gnu++11
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D CORE_DEBUG_LEVEL=0
; -D POWER_NO_SOFT_POWER
; -D HAS_SDCARD
; -D USE_SOFTSPI
; -D SD_CARD_SS=4
; -D SD_CARD_CLK=18
; -D SD_CARD_MISO=19
; -D SD_CARD_MOSI=23
; -D FLASHER_AP_SS=5
; -D FLASHER_AP_CLK=36
; -D FLASHER_AP_MOSI=26
; -D FLASHER_AP_MISO=35
; -D FLASHER_AP_RESET=2
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=16
; -D FLASHER_AP_RXD=17
; -D FLASHER_LED=-1
; -D FLASH_TIMEOUT=10
; -D USER_SETUP_LOADED
; -D DISABLE_ALL_LIBRARY_WARNINGS
; -D ILI9341_DRIVER
; -D SMOOTH_FONT
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
; ----------------------------------------------------------------------------------------
; !!! this configuration expects the Nano_C6
; ----------------------------------------------------------------------------------------
;[env:OpenEPaperLink_Nano_C6]
;platform = https://github.com/platformio/platform-espressif32.git
;board=lolin_s2_mini
;board_build.partitions = default.csv
;build_unflags =
; -std=gnu++11
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
;build_flags =
; -std=gnu++17
; ${env.build_flags}
; -D OPENEPAPERLINK_NANO_AP_PCB
; -D ARDUINO_USB_MODE=0
; -D CONFIG_SPIRAM_USE_MALLOC=1
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
; -D POWER_NO_SOFT_POWER
; -D BOARD_HAS_PSRAM
; -D FLASHER_AP_SS=-1
; -D FLASHER_AP_CLK=-1
; -D FLASHER_AP_MOSI=-1
; -D FLASHER_AP_MISO=-1
; -D FLASHER_AP_RESET=39
; -D FLASHER_AP_POWER={-1}
; -D FLASHER_AP_TEST=-1
; -D FLASHER_AP_TXD=35
; -D FLASHER_AP_RXD=33
; -D FLASHER_LED=15
; -D FLASHER_RGB_LED=-1
; -D MD5_ENABLED=1
; -D SERIAL_FLASHER_INTERFACE_UART=1
; -D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
; -D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
;build_src_filter =
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
;board_build.psram_type=qspi_opi
;board_upload.maximum_size = 4194304
;board_upload.maximum_ram_size = 327680
;board_upload.flash_size = 4MB
Reference in New Issue View Git Blame Copy Permalink