mirror of
https://github.com/OpenEPaperLink/OpenEPaperLink.git
synced 2026-03-21 03:04:25 +01:00
663 lines
19 KiB
INI
663 lines
19 KiB
INI
; Try to not create new configs if possible, if in doubt, please ask
|
|
; OTA on the official repo will only be published for mass-produced APs, feel free to experiment on your own fork
|
|
[env]
|
|
platform = espressif32
|
|
framework = arduino
|
|
lib_deps =
|
|
; original ESPAsyncWebServer
|
|
; https://github.com/me-no-dev/ESPAsyncWebServer
|
|
|
|
; alternative AsyncTCP + ESPAsyncwebserver fork
|
|
https://github.com/yubox-node-org/ESPAsyncWebServer#yuboxfixes-0xFEEDC0DE64-cleanup
|
|
https://github.com/yubox-node-org/AsyncTCPSock
|
|
|
|
bblanchon/ArduinoJson@^6.19.4
|
|
bodmer/TFT_eSPI
|
|
https://github.com/Bodmer/TJpg_Decoder.git
|
|
https://github.com/nlimper/shoddyxml2
|
|
https://github.com/nlimper/QRCodeGenerator
|
|
fastled/FastLED
|
|
https://github.com/MajenkoLibraries/SoftSPI
|
|
lib_ignore =
|
|
; Replaced with better version (AsyncTCPSock)
|
|
AsyncTCP
|
|
platform_packages =
|
|
board_build.filesystem = littlefs
|
|
monitor_filters = esp32_exception_decoder
|
|
monitor_speed = 115200
|
|
board_build.f_cpu = 240000000L
|
|
build_unflags =
|
|
-std=gnu++11
|
|
build_flags =
|
|
-std=gnu++17
|
|
-D BUILD_ENV_NAME=$PIOENV
|
|
-D BUILD_TIME=$UNIX_TIME
|
|
-D USER_SETUP_LOADED
|
|
-D DISABLE_ALL_LIBRARY_WARNINGS
|
|
-D ILI9341_DRIVER
|
|
-D SMOOTH_FONT
|
|
;upload_port = COM11
|
|
;monitor_port = COM11
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects the Mini_AP
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:OpenEPaperLink_Mini_AP]
|
|
platform = https://github.com/platformio/platform-espressif32.git
|
|
board=lolin_s2_mini
|
|
board_build.partitions = default.csv
|
|
build_unflags =
|
|
-std=gnu++11
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D OPENEPAPERLINK_MINI_AP_PCB
|
|
-D ARDUINO_USB_MODE=0
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D HAS_RGB_LED
|
|
-D BOARD_HAS_PSRAM
|
|
-D SAVE_SPACE
|
|
-D POWER_NO_SOFT_POWER
|
|
-D FLASHER_AP_SS=11
|
|
-D FLASHER_AP_CLK=9
|
|
-D FLASHER_AP_MOSI=10
|
|
-D FLASHER_AP_MISO=8
|
|
-D FLASHER_AP_RESET=13
|
|
-D FLASHER_AP_POWER={-1} ;this board has no soft power control
|
|
-D FLASHER_AP_TXD=7
|
|
-D FLASHER_AP_RXD=6
|
|
-D FLASHER_AP_TEST=12
|
|
-D FLASHER_LED=15
|
|
-D FLASHER_RGB_LED=33
|
|
build_src_filter =
|
|
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
|
|
board_build.psram_type=qspi_opi
|
|
board_upload.maximum_size = 4194304
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 4MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects the Nano_AP
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:OpenEPaperLink_Nano_AP]
|
|
platform = https://github.com/platformio/platform-espressif32.git
|
|
board=lolin_s2_mini
|
|
board_build.partitions = default.csv
|
|
build_unflags =
|
|
-std=gnu++11
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D OPENEPAPERLINK_NANO_AP_PCB
|
|
-D ARDUINO_USB_MODE=0
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D BOARD_HAS_PSRAM
|
|
-D SAVE_SPACE
|
|
-D FLASHER_AP_SS=38
|
|
-D FLASHER_AP_CLK=40
|
|
-D FLASHER_AP_MOSI=39
|
|
-D FLASHER_AP_MISO=33
|
|
-D FLASHER_AP_RESET=37
|
|
-D FLASHER_AP_POWER={16,17,18,21}
|
|
-D FLASHER_AP_TXD=35
|
|
-D FLASHER_AP_RXD=34
|
|
-D FLASHER_AP_TEST=36
|
|
-D FLASHER_LED=15
|
|
-D FLASHER_RGB_LED=-1
|
|
build_src_filter =
|
|
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
|
|
board_build.psram_type=qspi_opi
|
|
board_upload.maximum_size = 4194304
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 4MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects the 16MB Flash / 8MB Ram version of the ESP32-S3-DevkitC1
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:OpenEPaperLink_AP_and_Flasher]
|
|
platform = https://github.com/platformio/platform-espressif32.git
|
|
board = esp32-s3-devkitc-1
|
|
board_build.partitions = default_16MB.csv
|
|
build_unflags =
|
|
-std=gnu++11
|
|
-D ARDUINO_USB_MODE=1
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D HAS_EXT_FLASHER
|
|
-D ARDUINO_USB_MODE=0
|
|
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D HAS_USB
|
|
-D HAS_RGB_LED
|
|
-D BOARD_HAS_PSRAM
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D POWER_RAMPING
|
|
-D POWER_HIGH_SIDE_DRIVER
|
|
-D HAS_BLE_WRITER
|
|
-D FLASHER_AP_SS=4
|
|
-D FLASHER_AP_CLK=5
|
|
-D FLASHER_AP_MOSI=7
|
|
-D FLASHER_AP_MISO=6
|
|
-D FLASHER_AP_RESET=15
|
|
-D FLASHER_AP_POWER={0}
|
|
-D FLASHER_AP_TXD=16
|
|
-D FLASHER_AP_RXD=18
|
|
-D FLASHER_AP_TEST=17
|
|
-D FLASHER_EXT_SS=40
|
|
-D FLASHER_EXT_CLK=41
|
|
-D FLASHER_EXT_MOSI=2
|
|
-D FLASHER_EXT_MISO=42
|
|
-D FLASHER_EXT_RESET=1
|
|
-D FLASHER_EXT_POWER={8}
|
|
-D FLASHER_EXT_TXD=38
|
|
-D FLASHER_EXT_RXD=39
|
|
-D FLASHER_EXT_TEST=47
|
|
-D FLASHER_ALT_SS=3
|
|
-D FLASHER_ALT_CLK=46
|
|
-D FLASHER_ALT_MOSI=10
|
|
-D FLASHER_ALT_MISO=9
|
|
-D FLASHER_ALT_RESET=11
|
|
-D FLASHER_ALT_POWER={-1}
|
|
-D FLASHER_ALT_TXD=12
|
|
-D FLASHER_ALT_RXD=14
|
|
-D FLASHER_ALT_TEST=13
|
|
-D FLASHER_LED=21
|
|
-D FLASHER_RGB_LED=48
|
|
build_src_filter =
|
|
+<*>-<espflasher.cpp>
|
|
board_build.flash_mode=qio
|
|
board_build.arduino.memory_type = qio_opi
|
|
board_build.psram_type=qspi_opi
|
|
board_upload.maximum_size = 16777216
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 16MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an esp32 (depricated)
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:Simple_AP]
|
|
board = esp32dev
|
|
board_build.partitions = default.csv
|
|
build_unflags =
|
|
-std=gnu++11
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D CORE_DEBUG_LEVEL=0
|
|
-D SIMPLE_AP
|
|
-D SAVE_SPACE
|
|
-D FLASHER_AP_SS=5
|
|
-D FLASHER_AP_CLK=18
|
|
-D FLASHER_AP_MOSI=23
|
|
-D FLASHER_AP_MISO=19
|
|
-D FLASHER_AP_RESET=2
|
|
-D FLASHER_AP_POWER={13,15}
|
|
-D FLASHER_AP_TEST=-1
|
|
-D FLASHER_AP_TXD=17
|
|
-D FLASHER_AP_RXD=16
|
|
-D FLASHER_LED=22
|
|
build_src_filter =
|
|
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:ESP32_S3_16_8_YELLOW_AP]
|
|
board = esp32-s3-devkitc-1
|
|
board_build.partitions = large_spiffs_16MB.csv
|
|
build_unflags =
|
|
-std=gnu++11
|
|
-D ARDUINO_USB_MODE=1
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
-D ILI9341_DRIVER
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D HAS_TFT
|
|
-D CORE_DEBUG_LEVEL=0
|
|
-D ARDUINO_USB_MODE=0
|
|
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D POWER_NO_SOFT_POWER
|
|
-D BOARD_HAS_PSRAM
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D HAS_BLE_WRITER
|
|
-D FLASHER_AP_SS=-1
|
|
-D FLASHER_AP_CLK=-1
|
|
-D FLASHER_AP_MOSI=-1
|
|
-D FLASHER_AP_MISO=-1
|
|
-D FLASHER_AP_RESET=47
|
|
-D FLASHER_AP_POWER={-1}
|
|
-D FLASHER_AP_TEST=-1
|
|
-D FLASHER_AP_TXD=17
|
|
-D FLASHER_AP_RXD=18
|
|
-D FLASHER_DEBUG_TXD=19
|
|
-D FLASHER_DEBUG_RXD=20
|
|
-D FLASHER_DEBUG_PROG=21
|
|
-D FLASHER_LED=16
|
|
-D HAS_RGB_LED
|
|
-D FLASHER_RGB_LED=48
|
|
-D ST7789_DRIVER
|
|
-D TFT_WIDTH=172
|
|
-D TFT_HEIGHT=320
|
|
-D TFT_MISO=-1
|
|
-D TFT_MOSI=13
|
|
-D TFT_SCLK=12
|
|
-D TFT_CS=10
|
|
-D TFT_DC=11
|
|
-D TFT_RST=1
|
|
-D TFT_RGB_ORDER=TFT_BGR
|
|
-D USE_HSPI_PORT
|
|
-D LOAD_FONT2
|
|
-D MD5_ENABLED=1
|
|
-D SERIAL_FLASHER_INTERFACE_UART=1
|
|
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
|
|
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
|
|
-D C6_OTA_FLASHING
|
|
-D HAS_SUBGHZ
|
|
build_src_filter =
|
|
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
|
|
board_build.flash_mode=qio
|
|
board_build.arduino.memory_type = qio_opi
|
|
board_build.psram_type=qspi_opi
|
|
board_upload.maximum_size = 16777216
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 16MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:ESP32_S3_C6_NANO_AP]
|
|
board = esp32-s3-devkitc-1
|
|
board_build.partitions = large_spiffs_16MB.csv
|
|
build_unflags =
|
|
-std=gnu++11
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D HAS_BLE_WRITER
|
|
-D CORE_DEBUG_LEVEL=0
|
|
-D ARDUINO_USB_CDC_ON_BOOT
|
|
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D POWER_NO_SOFT_POWER
|
|
-D BOARD_HAS_PSRAM
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D FLASHER_AP_SS=-1
|
|
-D FLASHER_AP_CLK=-1
|
|
-D FLASHER_AP_MOSI=-1
|
|
-D FLASHER_AP_MISO=-1
|
|
-D FLASHER_AP_RESET=47
|
|
-D FLASHER_AP_POWER={-1}
|
|
-D FLASHER_AP_TEST=-1
|
|
-D FLASHER_AP_TXD=14
|
|
-D FLASHER_AP_RXD=13
|
|
-D FLASHER_DEBUG_TXD=12
|
|
-D FLASHER_DEBUG_RXD=11
|
|
-D FLASHER_DEBUG_PROG=21
|
|
-D FLASHER_LED=38
|
|
-D MD5_ENABLED=1
|
|
-D SERIAL_FLASHER_INTERFACE_UART=1
|
|
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
|
|
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
|
|
-D C6_OTA_FLASHING
|
|
build_src_filter =
|
|
+<*>-<usbflasher.cpp>-<swd.cpp>-<webflasher.cpp>
|
|
board_build.flash_mode=qio
|
|
board_build.arduino.memory_type = qio_opi
|
|
board_build.psram_type=qspi_opi
|
|
board_upload.maximum_size = 16777216
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 16MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects the PoE-AP and is work in progress right now !!!
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:OpenEPaperLink_PoE_AP]
|
|
platform = https://github.com/platformio/platform-espressif32.git
|
|
board=esp32dev
|
|
board_build.partitions = 16MB_partition table.csv
|
|
build_unflags =
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
-std=gnu++11
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D OPENEPAPERLINK_POE_AP_PCB
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D HAS_RGB_LED
|
|
-D BOARD_HAS_PSRAM
|
|
-mfix-esp32-psram-cache-issue
|
|
-D HAS_SDCARD
|
|
-D POWER_NO_SOFT_POWER
|
|
-D FLASHER_AP_SS=-1
|
|
-D FLASHER_AP_CLK=-1
|
|
-D FLASHER_AP_MOSI=-1
|
|
-D FLASHER_AP_MISO=-1
|
|
-D FLASHER_AP_RESET=-1
|
|
-D FLASHER_AP_POWER={-1} ;this board has no soft power control
|
|
-D FLASHER_AP_TXD=15
|
|
-D FLASHER_AP_RXD=4
|
|
-D FLASHER_AP_TEST=-1
|
|
-D FLASHER_LED=-1
|
|
-D FLASHER_RGB_LED=5
|
|
-D SD_CARD_CLK=13
|
|
-D SD_CARD_MISO=36
|
|
-D SD_CARD_MOSI=14
|
|
-D SD_CARD_SS=12
|
|
build_src_filter =
|
|
+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<webflasher.cpp>
|
|
board_build.flash_mode=qio
|
|
board_upload.maximum_size = 16777216
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 16MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an ESP32-S3 16MB Flash 8MB RAM
|
|
; ----------------------------------------------------------------------------------------
|
|
[env:OpenEPaperLink_Mini_AP_v4]
|
|
board = esp32-s3-devkitc-1
|
|
board_build.partitions = large_spiffs_16MB.csv
|
|
monitor_dtr = 0
|
|
monitor_rts = 0
|
|
build_unflags =
|
|
-std=gnu++11
|
|
-D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
-D ILI9341_DRIVER
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
build_flags =
|
|
-std=gnu++17
|
|
${env.build_flags}
|
|
-D HAS_TFT
|
|
-D HAS_EXT_FLASHER
|
|
-D CORE_DEBUG_LEVEL=1
|
|
-D ARDUINO_USB_CDC_ON_BOOT=1
|
|
-D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
|
|
-D CONFIG_SPIRAM_USE_MALLOC=1
|
|
-D POWER_NO_SOFT_POWER
|
|
-D BOARD_HAS_PSRAM
|
|
-D POWER_RAMPING
|
|
-D POWER_HIGH_SIDE_DRIVER
|
|
-D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
-D HAS_BLE_WRITER
|
|
-D FLASHER_AP_SS=-1
|
|
-D FLASHER_AP_CLK=-1
|
|
-D FLASHER_AP_MOSI=-1
|
|
-D FLASHER_AP_MISO=-1
|
|
-D FLASHER_AP_RESET=47
|
|
-D FLASHER_AP_POWER={-1}
|
|
-D FLASHER_AP_TEST=-1
|
|
-D FLASHER_AP_TXD=17
|
|
-D FLASHER_AP_RXD=18
|
|
-D FLASHER_DEBUG_TXD=15
|
|
-D FLASHER_DEBUG_RXD=7
|
|
-D FLASHER_DEBUG_PROG=21
|
|
-D FLASHER_LED=16
|
|
-D FLASHER_EXT_SS=40
|
|
-D FLASHER_EXT_CLK=41
|
|
-D FLASHER_EXT_MOSI=2
|
|
-D FLASHER_EXT_MISO=42
|
|
-D FLASHER_EXT_RESET=5
|
|
-D FLASHER_EXT_POWER={6}
|
|
-D FLASHER_EXT_TXD=38
|
|
-D FLASHER_EXT_RXD=39
|
|
-D FLASHER_EXT_TEST=4
|
|
-D FLASHER_ALT_SS=-1
|
|
-D FLASHER_ALT_CLK=-1
|
|
-D FLASHER_ALT_MOSI=-1
|
|
-D FLASHER_ALT_MISO=-1
|
|
-D FLASHER_ALT_RESET=-1
|
|
-D FLASHER_ALT_POWER={-1}
|
|
-D FLASHER_ALT_TXD=-1
|
|
-D FLASHER_ALT_RXD=-1
|
|
-D FLASHER_ALT_TEST=-1
|
|
-D HAS_RGB_LED
|
|
-D FLASHER_RGB_LED=48
|
|
-D ST7735_DRIVER
|
|
-D ST7735_GREENTAB160x80
|
|
-D TFT_INVERSION_ON
|
|
-D TFT_WIDTH=80
|
|
-D TFT_HEIGHT=160
|
|
-D TFT_MISO=-1
|
|
-D TFT_MOSI=13
|
|
-D TFT_SCLK=12
|
|
-D TFT_CS=10
|
|
-D TFT_DC=11
|
|
-D TFT_RST=1
|
|
-D TFT_RGB_ORDER=TFT_BGR
|
|
-D USE_HSPI_PORT
|
|
-D LOAD_FONT2
|
|
-D LOAD_FONT4
|
|
-D LOAD_GLCD
|
|
-D MD5_ENABLED=1
|
|
-D SERIAL_FLASHER_INTERFACE_UART=1
|
|
-D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=200
|
|
-D SERIAL_FLASHER_RESET_HOLD_TIME_MS=200
|
|
-D C6_OTA_FLASHING
|
|
build_src_filter =
|
|
+<*>
|
|
board_build.flash_mode=qio
|
|
board_build.arduino.memory_type = qio_opi
|
|
board_build.psram_type=qspi_opi
|
|
board_upload.maximum_size = 16777216
|
|
board_upload.maximum_ram_size = 327680
|
|
board_upload.flash_size = 16MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an SONOFF ZB Bridge-P
|
|
; ----------------------------------------------------------------------------------------
|
|
;[env:Sonoff_zb_bridge_P_AP]
|
|
;board = esp32dev
|
|
;board_build.partitions = default.csv
|
|
;build_unflags =
|
|
; -std=gnu++11
|
|
;build_flags =
|
|
; -std=gnu++17
|
|
; ${env.build_flags}
|
|
; -D CORE_DEBUG_LEVEL=0
|
|
; -D POWER_NO_SOFT_POWER
|
|
; -DBOARD_HAS_PSRAM
|
|
; -mfix-esp32-psram-cache-issue
|
|
; -D FLASHER_AP_SS=-1
|
|
; -D FLASHER_AP_CLK=-1
|
|
; -D FLASHER_AP_MOSI=-1
|
|
; -D FLASHER_AP_MISO=-1
|
|
; -D FLASHER_AP_RESET=-1
|
|
; -D FLASHER_AP_POWER={-1}
|
|
; -D FLASHER_AP_TEST=-1
|
|
; -D FLASHER_AP_TXD=19
|
|
; -D FLASHER_AP_RXD=23
|
|
; -D FLASHER_LED=2
|
|
;build_src_filter =
|
|
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
|
|
;board_build.psram_type=qspi_opi
|
|
;board_upload.maximum_size = 4194304
|
|
;board_upload.maximum_ram_size = 327680
|
|
;board_upload.flash_size = 4MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects the UniRfInterface PCB with EBYTE E79 CC1352P Module
|
|
; ----------------------------------------------------------------------------------------
|
|
;[env:OpenEPaperLink_CC1352P]
|
|
;platform = https://github.com/platformio/platform-espressif32.git
|
|
;board=lolin_s2_mini
|
|
;board_build.partitions = default.csv
|
|
;build_unflags =
|
|
; -std=gnu++11
|
|
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
;build_flags =
|
|
; -std=gnu++17
|
|
; ${env.build_flags}
|
|
; -D OPENEPAPERLINK_MINI_AP_PCB
|
|
; -D ARDUINO_USB_MODE=0
|
|
; -D CONFIG_SPIRAM_USE_MALLOC=1
|
|
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
; -D BOARD_HAS_PSRAM
|
|
; -D POWER_NO_SOFT_POWER
|
|
; -D FLASHER_AP_SS=-1
|
|
; -D FLASHER_AP_CLK=-1
|
|
; -D FLASHER_AP_MOSI=-1
|
|
; -D FLASHER_AP_MISO=-1
|
|
; -D FLASHER_AP_RESET=21
|
|
; -D FLASHER_AP_POWER={-1} ;this board has no soft power control
|
|
; -D FLASHER_AP_TXD=17
|
|
; -D FLASHER_AP_RXD=16
|
|
; -D FLASHER_AP_TEST=-1
|
|
; -D FLASHER_LED=2
|
|
; -D FLASHER_RGB_LED=-1
|
|
;build_src_filter =
|
|
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
|
|
;board_build.psram_type=qspi_opi
|
|
;board_upload.maximum_size = 4194304
|
|
;board_upload.maximum_ram_size = 327680
|
|
;board_upload.flash_size = 4MB
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration is work in progress, do not use for now
|
|
; ----------------------------------------------------------------------------------------
|
|
;[env:OutdoorAP]
|
|
;board = esp32-s3-devkitc-1
|
|
;board_build.partitions = 32MB_partition table.csv
|
|
;build_unflags =
|
|
; -std=gnu++11
|
|
; -D ARDUINO_USB_MODE=1
|
|
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
;build_flags =
|
|
; -std=gnu++17
|
|
; ${env.build_flags}
|
|
; -D OutdoorAP
|
|
; -D HAS_RGB_LED
|
|
; -D CORE_DEBUG_LEVEL=0
|
|
; -D ARDUINO_USB_MODE=0
|
|
; -D CONFIG_ESP32S3_SPIRAM_SUPPORT=1
|
|
; -D CONFIG_SPIRAM_USE_MALLOC=1
|
|
; -D POWER_NO_SOFT_POWER
|
|
; -D BOARD_HAS_PSRAM
|
|
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
; -D FLASHER_AP_SS=-1
|
|
; -D FLASHER_AP_CLK=-1
|
|
; -D FLASHER_AP_MOSI=-1
|
|
; -D FLASHER_AP_MISO=-1
|
|
; -D FLASHER_AP_RESET=47
|
|
; -D FLASHER_AP_POWER={-1}
|
|
; -D FLASHER_AP_TEST=-1
|
|
; -D FLASHER_AP_TXD=17
|
|
; -D FLASHER_AP_RXD=18
|
|
; -D FLASHER_LED=21
|
|
; -D FLASHER_RGB_LED=38
|
|
;build_src_filter =
|
|
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
|
|
;board_build.flash_mode=opi
|
|
;board_build.arduino.memory_type = opi_opi
|
|
;board_build.psram_type=qspi_opi
|
|
;board_upload.maximum_size = 16777216
|
|
;board_upload.maximum_ram_size = 327680
|
|
;board_upload.flash_size = 32MB
|
|
#upload_flags = --no-stub
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an wemos_d1_mini32
|
|
; ----------------------------------------------------------------------------------------
|
|
;[env:Wemos_d1_mini32_AP]
|
|
;board = wemos_d1_mini32
|
|
;board_build.partitions = default.csv
|
|
;build_unflags =
|
|
; -std=gnu++11
|
|
;build_flags =
|
|
; -std=gnu++17
|
|
; ${env.build_flags}
|
|
; -D CORE_DEBUG_LEVEL=0
|
|
; -D POWER_NO_SOFT_POWER
|
|
; -D FLASHER_AP_SS=5
|
|
; -D FLASHER_AP_CLK=18
|
|
; -D FLASHER_AP_MOSI=23
|
|
; -D FLASHER_AP_MISO=19
|
|
; -D FLASHER_AP_RESET=14
|
|
; -D FLASHER_AP_POWER={-1}
|
|
; -D FLASHER_AP_TEST=-1
|
|
; -D FLASHER_AP_TXD=16
|
|
; -D FLASHER_AP_RXD=17
|
|
; -D FLASHER_LED=22
|
|
;build_src_filter =
|
|
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects an m5stack esp32
|
|
; ----------------------------------------------------------------------------------------
|
|
;[env:M5Stack_Core_ONE_AP]
|
|
;platform = espressif32
|
|
;board = m5stack-core-esp32
|
|
;board_build.partitions = esp32_sdcard.csv
|
|
;build_unflags =
|
|
; -std=gnu++11
|
|
;build_flags =
|
|
; -std=gnu++17
|
|
; ${env.build_flags}
|
|
; -D CORE_DEBUG_LEVEL=0
|
|
; -D POWER_NO_SOFT_POWER
|
|
; -D HAS_SDCARD
|
|
; -D USE_SOFTSPI
|
|
; -D SD_CARD_SS=4
|
|
; -D SD_CARD_CLK=18
|
|
; -D SD_CARD_MISO=19
|
|
; -D SD_CARD_MOSI=23
|
|
; -D FLASHER_AP_SS=5
|
|
; -D FLASHER_AP_CLK=36
|
|
; -D FLASHER_AP_MOSI=26
|
|
; -D FLASHER_AP_MISO=35
|
|
; -D FLASHER_AP_RESET=2
|
|
; -D FLASHER_AP_POWER={-1}
|
|
; -D FLASHER_AP_TEST=-1
|
|
; -D FLASHER_AP_TXD=16
|
|
; -D FLASHER_AP_RXD=17
|
|
; -D FLASHER_LED=-1
|
|
; -D FLASH_TIMEOUT=10
|
|
; -D USER_SETUP_LOADED
|
|
; -D DISABLE_ALL_LIBRARY_WARNINGS
|
|
; -D ILI9341_DRIVER
|
|
; -D SMOOTH_FONT
|
|
;build_src_filter =
|
|
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
|
|
; ----------------------------------------------------------------------------------------
|
|
; !!! this configuration expects the Nano_C6
|
|
; ----------------------------------------------------------------------------------------
|
|
;[env:OpenEPaperLink_Nano_C6]
|
|
;platform = https://github.com/platformio/platform-espressif32.git
|
|
;board=lolin_s2_mini
|
|
;board_build.partitions = default.csv
|
|
;build_unflags =
|
|
; -std=gnu++11
|
|
; -D CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
|
;build_flags =
|
|
; -std=gnu++17
|
|
; ${env.build_flags}
|
|
; -D OPENEPAPERLINK_NANO_AP_PCB
|
|
; -D ARDUINO_USB_MODE=0
|
|
; -D CONFIG_SPIRAM_USE_MALLOC=1
|
|
; -D CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
|
; -D POWER_NO_SOFT_POWER
|
|
; -D BOARD_HAS_PSRAM
|
|
; -D FLASHER_AP_SS=-1
|
|
; -D FLASHER_AP_CLK=-1
|
|
; -D FLASHER_AP_MOSI=-1
|
|
; -D FLASHER_AP_MISO=-1
|
|
; -D FLASHER_AP_RESET=39
|
|
; -D FLASHER_AP_POWER={-1}
|
|
; -D FLASHER_AP_TEST=-1
|
|
; -D FLASHER_AP_TXD=35
|
|
; -D FLASHER_AP_RXD=33
|
|
; -D FLASHER_LED=15
|
|
; -D FLASHER_RGB_LED=-1
|
|
; -D MD5_ENABLED=1
|
|
; -D SERIAL_FLASHER_INTERFACE_UART=1
|
|
; -D SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
|
|
; -D SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
|
|
;build_src_filter =
|
|
; +<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>
|
|
;board_build.psram_type=qspi_opi
|
|
;board_upload.maximum_size = 4194304
|
|
;board_upload.maximum_ram_size = 327680
|
|
;board_upload.flash_size = 4MB
|