diff --git a/LilyGo-T‐Panel-AP.md b/LilyGo-T‐Panel-AP.md
index 74e64a5..e765e36 100644
--- a/LilyGo-T‐Panel-AP.md
+++ b/LilyGo-T‐Panel-AP.md
@@ -4,7 +4,7 @@ Lilygo which can be used as an OEPL AP without modifications with 802.15.4 and B
>[!IMPORTANT]
> The "Lite" version of the T-Panel can not be used as an OEPL AP since it lacks a ESP32-H2 processor.
-## Installing OpenEPaperLink AP firmware on the T-Panel
+## Installing OpenEPaperLink AP firmware on the LilyGo T-Panel
Step 1: Connect the T-Panel's S3 USB port to PC.
@@ -59,43 +59,5 @@ much quicker.
## SubGhz support
-**NB: SubGhz support is NOT functional in the current release, but Beta binaries are available [here](https://github.com/skiphansen/OpenEPaperLink/releases).**
+If you are interested in supporting SubGhz Tags with your new AP see [SubGhz-support-for-the-LilyGo-T-Panel](https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/SubGhz-support-for-the-LilyGo-T%E2%80%90Panel).
-Support for SubGhz tags can be added by connecting an CC1101 module to
-the T-Panel via the H2 expansion port accessible externally.
-
-
-
-
-
-
-## SubGhz Connections for LilyGo T-Panel S3
-
-An CC1101 module can be connected to the H2 expansion port using a 16 pin
-ribbon cable with a 1.27mm / 0.05" pin spacing.
-
-|T-PANEL Pin | Signal | Usage | Ebyte
E07-900M10S
Pin |
-| :-: | :-: | - | :-: |
-| 1 | 5v | - | | |
-| 2 | 3.3v | Power | 9 |
-| 3 | GND | GND | 12 |
-| 4 | GND | GND | 11 |
-| 5 | GND | GND | 4 |
-| 6 | IO25 | MISO | 16 |
-| 7 | IO22 | GDO2 | 14 |
-| 8 | IO02 | GDO0 | 15 |
-| 9 | IO08 | CSn | 19 |
-| 10 | IO03 | SCLK | 18 |
-| 11 | IO11 | MOSI | 17|
-| 12 | IO00 | | |
-| 13 | IO10 | | |
-| 14 | IO01 | | |
-| 15 | IO14 | | |
-| 16 | IO13 | | |
-
-An PCB is planned to replace the need for spaghetti wiring.
-
-NOTE: Pin 1 is the lower right hand pin looking at the back of the T-Panel
-with the USB connectors at bottom.
-
-