From ae323005645161d8da2b0a14146c7591754e5140 Mon Sep 17 00:00:00 2001 From: Skip Hansen Date: Wed, 18 Feb 2026 13:46:38 -0800 Subject: [PATCH] Updated Flashing SiLabs based M3 Newton Displays (markdown) --- Flashing-SiLabs-based-M3-Newton-Displays.md | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/Flashing-SiLabs-based-M3-Newton-Displays.md b/Flashing-SiLabs-based-M3-Newton-Displays.md index 05e1faa..4ac2d59 100644 --- a/Flashing-SiLabs-based-M3-Newton-Displays.md +++ b/Flashing-SiLabs-based-M3-Newton-Displays.md @@ -51,14 +51,17 @@ Of course wires can also be soldered directly to the test points, the pads are r Pinout connections for Silicon Labs debugger, see sections [2.3.2/2.3.3 in the user guide](https://www.silabs.com/documents/public/user-guides/ug548-brd1015a-user-guide.pdf): | Tag | Debugger | Note | -| - | - | - | -|VCC | VTARGET| make sure either the debugger (see section 4 in the user manual) or another power source is providing 3.3V to the tag | +|:- | :- | :- | +|VDD | VTARGET| make sure either the debugger (see section 4 in the user manual) or another power source is providing 3.3V to the tag | |GND | GND| -|SWDIO | SWDIO| -|SWDCLK | SWCLK| -|nRESET | RST| -|P0.25 | VCOM_RX |serial debug output (optional)| -|P0.26 | VCOM_TX | serial input (not used currently) | +|SWDIO (DIO) | SWDIO| +|SWDCLK (CLK)| SWCLK| +|nReset (RST)| RST| +|P0.25 (TX)| VCOM_RX |serial debug output (optional)| +|P0.26 (RX)| VCOM_TX | serial input (not used currently) | +|P0.27 (MP)| - | | +|P0.22 (D/L>|-|| + image