mirror of
https://github.com/sascha-hemi/pycom-documentation.git
synced 2026-03-21 07:06:20 +01:00
GitBook: [master] 333 pages modified
This commit is contained in:
Daniel Spindelbauer
committed by
gitbook-bot
gitbook-bot
parent
260e81c8e8
commit
015fdc88ef
@@ -5,9 +5,9 @@ Welcome to the Pycom documentation site. We recommend reading through all the se
|
||||
To get started, read through the Getting Started Guide then feel free to jump straight into the tutorials and examples in Tutorials & Examples to begin building your projects.
|
||||
|
||||
* [Products](products.md)
|
||||
* [Getting Started](getting-started/introduction.md)
|
||||
* [Tutorials](tutorials-and-examples/introduction.md)
|
||||
* [Product Info](product-info/introduction.md)
|
||||
* [API Documentation](firmware-and-api-reference/introduction.md)
|
||||
* [Getting Started](gettingstarted/introduction.md)
|
||||
* [Tutorials](tutorials/introduction.md)
|
||||
* [Product Info](datasheets/introduction.md)
|
||||
* [API Documentation](firmwareapi/introduction.md)
|
||||
* [Pybytes](pybytes/introduction.md)
|
||||
|
||||
|
||||
326
SUMMARY.md
326
SUMMARY.md
@@ -5,176 +5,176 @@
|
||||
|
||||
## Getting Started
|
||||
|
||||
* [Introduction](getting-started/introduction.md)
|
||||
* [Hardware Setup](getting-started/connection/README.md)
|
||||
* [LoPy](getting-started/connection/lopy.md)
|
||||
* [LoPy 4](getting-started/connection/lopy4.md)
|
||||
* [SiPy](getting-started/connection/sipy.md)
|
||||
* [GPy](getting-started/connection/gpy.md)
|
||||
* [FiPy](getting-started/connection/fipy.md)
|
||||
* [WiPy](getting-started/connection/wipy.md)
|
||||
* [Software](getting-started/installation/README.md)
|
||||
* [Drivers](getting-started/installation/drivers.md)
|
||||
* [Updating Firmware](getting-started/installation/firmwaretool.md)
|
||||
* [Pymakr](getting-started/installation/pymakr.md)
|
||||
* [Programming the modules](getting-started/programming/README.md)
|
||||
* [Introduction to MicroPython](getting-started/programming/micropython.md)
|
||||
* [MicroPython Examples](getting-started/programming/examples.md)
|
||||
* [Your first Pymakr project](getting-started/programming/first-project.md)
|
||||
* [REPL](getting-started/programming/repl/README.md)
|
||||
* [Serial USB \(UART\)](getting-started/programming/repl/serial.md)
|
||||
* [Telnet REPL](getting-started/programming/repl/telnet.md)
|
||||
* [FTP](getting-started/programming/ftp.md)
|
||||
* [Safe boot](getting-started/programming/safeboot.md)
|
||||
* [Device Registration](getting-started/registration/README.md)
|
||||
* [Sigfox](getting-started/registration/sigfox.md)
|
||||
* [Cellular](getting-started/registration/cellular.md)
|
||||
* [LoRaWAN](getting-started/registration/lora/README.md)
|
||||
* [The Things Network](getting-started/registration/lora/ttn.md)
|
||||
* [Senet](getting-started/registration/lora/senet.md)
|
||||
* [Introduction](gettingstarted/introduction.md)
|
||||
* [Hardware Setup](gettingstarted/connection/README.md)
|
||||
* [LoPy](gettingstarted/connection/lopy.md)
|
||||
* [LoPy 4](gettingstarted/connection/lopy4.md)
|
||||
* [SiPy](gettingstarted/connection/sipy.md)
|
||||
* [GPy](gettingstarted/connection/gpy.md)
|
||||
* [FiPy](gettingstarted/connection/fipy.md)
|
||||
* [WiPy](gettingstarted/connection/wipy.md)
|
||||
* [Software](gettingstarted/installation/README.md)
|
||||
* [Drivers](gettingstarted/installation/drivers.md)
|
||||
* [Updating Firmware](gettingstarted/installation/firmwaretool.md)
|
||||
* [Pymakr](gettingstarted/installation/pymakr.md)
|
||||
* [Programming the modules](gettingstarted/programming/README.md)
|
||||
* [Introduction to MicroPython](gettingstarted/programming/micropython.md)
|
||||
* [MicroPython Examples](gettingstarted/programming/examples.md)
|
||||
* [Your first Pymakr project](gettingstarted/programming/first-project.md)
|
||||
* [REPL](gettingstarted/programming/repl/README.md)
|
||||
* [Serial USB \(UART\)](gettingstarted/programming/repl/serial.md)
|
||||
* [Telnet REPL](gettingstarted/programming/repl/telnet.md)
|
||||
* [FTP](gettingstarted/programming/ftp.md)
|
||||
* [Safe boot](gettingstarted/programming/safeboot.md)
|
||||
* [Device Registration](gettingstarted/registration/README.md)
|
||||
* [Sigfox](gettingstarted/registration/sigfox.md)
|
||||
* [Cellular](gettingstarted/registration/cellular.md)
|
||||
* [LoRaWAN](gettingstarted/registration/lora/README.md)
|
||||
* [The Things Network](gettingstarted/registration/lora/ttn.md)
|
||||
* [Senet](gettingstarted/registration/lora/senet.md)
|
||||
|
||||
## Pymakr Plugin
|
||||
|
||||
* [Installation](pymakr-plugin/installation/README.md)
|
||||
* [Atom](pymakr-plugin/installation/atom.md)
|
||||
* [Visual Studio Code](pymakr-plugin/installation/vscode.md)
|
||||
* [Tools/Features](pymakr-plugin/toolsfeatures.md)
|
||||
* [Settings](pymakr-plugin/settings.md)
|
||||
* [Installation](pymakr/installation/README.md)
|
||||
* [Atom](pymakr/installation/atom.md)
|
||||
* [Visual Studio Code](pymakr/installation/vscode.md)
|
||||
* [Tools/Features](pymakr/toolsfeatures.md)
|
||||
* [Settings](pymakr/settings.md)
|
||||
|
||||
## Pytrack, Pysense, Pyscan
|
||||
|
||||
* [Introduction](pytrack-pysense-pyscan/introduction.md)
|
||||
* [Installing Software](pytrack-pysense-pyscan/installation/README.md)
|
||||
* [Updating Firmware](pytrack-pysense-pyscan/installation/firmware.md)
|
||||
* [Installing Drivers - Windows 7](pytrack-pysense-pyscan/installation/drivers.md)
|
||||
* [Installing Libraries](pytrack-pysense-pyscan/installation/libraries.md)
|
||||
* [API Reference](pytrack-pysense-pyscan/apireference/README.md)
|
||||
* [Pytrack](pytrack-pysense-pyscan/apireference/pytrack.md)
|
||||
* [Pysense](pytrack-pysense-pyscan/apireference/pysense.md)
|
||||
* [Pyscan](pytrack-pysense-pyscan/apireference/pyscan.md)
|
||||
* [Sleep](pytrack-pysense-pyscan/apireference/sleep.md)
|
||||
* [Introduction](pytrackpysense/introduction.md)
|
||||
* [Installing Software](pytrackpysense/installation/README.md)
|
||||
* [Updating Firmware](pytrackpysense/installation/firmware.md)
|
||||
* [Installing Drivers - Windows 7](pytrackpysense/installation/drivers.md)
|
||||
* [Installing Libraries](pytrackpysense/installation/libraries.md)
|
||||
* [API Reference](pytrackpysense/apireference/README.md)
|
||||
* [Pytrack](pytrackpysense/apireference/pytrack.md)
|
||||
* [Pysense](pytrackpysense/apireference/pysense.md)
|
||||
* [Pyscan](pytrackpysense/apireference/pyscan.md)
|
||||
* [Sleep](pytrackpysense/apireference/sleep.md)
|
||||
|
||||
## Tutorials & Examples
|
||||
|
||||
* [Introduction](tutorials-and-examples/introduction.md)
|
||||
* [All Pycom Device Examples](tutorials-and-examples/all/README.md)
|
||||
* [REPL](tutorials-and-examples/all/repl.md)
|
||||
* [WLAN](tutorials-and-examples/all/wlan.md)
|
||||
* [Bluetooth](tutorials-and-examples/all/ble.md)
|
||||
* [HTTPS](tutorials-and-examples/all/https.md)
|
||||
* [MQTT](tutorials-and-examples/all/mqtt.md)
|
||||
* [AWS](tutorials-and-examples/all/aws.md)
|
||||
* [ADC](tutorials-and-examples/all/adc.md)
|
||||
* [I2C](tutorials-and-examples/all/i2c.md)
|
||||
* [Onewire Driver](tutorials-and-examples/all/owd.md)
|
||||
* [Threading](tutorials-and-examples/all/threading.md)
|
||||
* [RGB LED](tutorials-and-examples/all/rgbled.md)
|
||||
* [Timers](tutorials-and-examples/all/timers.md)
|
||||
* [PIR Sensor](tutorials-and-examples/all/pir.md)
|
||||
* [Modbus](tutorials-and-examples/all/modbus.md)
|
||||
* [OTA update](tutorials-and-examples/all/ota.md)
|
||||
* [RMT](tutorials-and-examples/all/rmt.md)
|
||||
* [LoRa Examples](tutorials-and-examples/lora/README.md)
|
||||
* [LoRa-MAC \(Raw LoRa\)](tutorials-and-examples/lora/lora-mac.md)
|
||||
* [LoRaWAN with OTAA](tutorials-and-examples/lora/lorawan-otaa.md)
|
||||
* [LoRaWAN with ABP](tutorials-and-examples/lora/lorawan-abp.md)
|
||||
* [LoRa-MAC Nano-Gateway](tutorials-and-examples/lora/lora-mac-nano-gateway.md)
|
||||
* [LoPy to LoPy](tutorials-and-examples/lora/module-module.md)
|
||||
* [LoRaWAN Nano-Gateway](tutorials-and-examples/lora/lorawan-nano-gateway.md)
|
||||
* [RN2483 to LoPy](tutorials-and-examples/lora/rn2483-to-lopy.md)
|
||||
* [Sigfox Examples](tutorials-and-examples/sigfox.md)
|
||||
* [LTE Examples](tutorials-and-examples/lte/README.md)
|
||||
* [CAT-M1](tutorials-and-examples/lte/cat-m1.md)
|
||||
* [NB-IoT](tutorials-and-examples/lte/nb-iot.md)
|
||||
* [Module IMEI](tutorials-and-examples/lte/imei.md)
|
||||
* [Modem Firmware Update](tutorials-and-examples/lte/firmware.md)
|
||||
* [Pytrack Examples](tutorials-and-examples/pytrack.md)
|
||||
* [Pysense Examples](tutorials-and-examples/pysense.md)
|
||||
* [Pyscan Examples](tutorials-and-examples/pyscan.md)
|
||||
* [Introduction](tutorials/introduction.md)
|
||||
* [All Pycom Device Examples](tutorials/all/README.md)
|
||||
* [REPL](tutorials/all/repl.md)
|
||||
* [WLAN](tutorials/all/wlan.md)
|
||||
* [Bluetooth](tutorials/all/ble.md)
|
||||
* [HTTPS](tutorials/all/https.md)
|
||||
* [MQTT](tutorials/all/mqtt.md)
|
||||
* [AWS](tutorials/all/aws.md)
|
||||
* [ADC](tutorials/all/adc.md)
|
||||
* [I2C](tutorials/all/i2c.md)
|
||||
* [Onewire Driver](tutorials/all/owd.md)
|
||||
* [Threading](tutorials/all/threading.md)
|
||||
* [RGB LED](tutorials/all/rgbled.md)
|
||||
* [Timers](tutorials/all/timers.md)
|
||||
* [PIR Sensor](tutorials/all/pir.md)
|
||||
* [Modbus](tutorials/all/modbus.md)
|
||||
* [OTA update](tutorials/all/ota.md)
|
||||
* [RMT](tutorials/all/rmt.md)
|
||||
* [LoRa Examples](tutorials/lora/README.md)
|
||||
* [LoRa-MAC \(Raw LoRa\)](tutorials/lora/lora-mac.md)
|
||||
* [LoRaWAN with OTAA](tutorials/lora/lorawan-otaa.md)
|
||||
* [LoRaWAN with ABP](tutorials/lora/lorawan-abp.md)
|
||||
* [LoRa-MAC Nano-Gateway](tutorials/lora/lora-mac-nano-gateway.md)
|
||||
* [LoPy to LoPy](tutorials/lora/module-module.md)
|
||||
* [LoRaWAN Nano-Gateway](tutorials/lora/lorawan-nano-gateway.md)
|
||||
* [RN2483 to LoPy](tutorials/lora/rn2483-to-lopy.md)
|
||||
* [Sigfox Examples](tutorials/sigfox.md)
|
||||
* [LTE Examples](tutorials/lte/README.md)
|
||||
* [CAT-M1](tutorials/lte/cat-m1.md)
|
||||
* [NB-IoT](tutorials/lte/nb-iot.md)
|
||||
* [Module IMEI](tutorials/lte/imei.md)
|
||||
* [Modem Firmware Update](tutorials/lte/firmware.md)
|
||||
* [Pytrack Examples](tutorials/pytrack.md)
|
||||
* [Pysense Examples](tutorials/pysense.md)
|
||||
* [Pyscan Examples](tutorials/pyscan.md)
|
||||
|
||||
## Firmware & API Reference
|
||||
|
||||
* [Introduction](firmware-and-api-reference/introduction.md)
|
||||
* [Pycom Modules](firmware-and-api-reference/pycom/README.md)
|
||||
* [machine](firmware-and-api-reference/pycom/machine/README.md)
|
||||
* [ADC](firmware-and-api-reference/pycom/machine/adc.md)
|
||||
* [DAC](firmware-and-api-reference/pycom/machine/dac.md)
|
||||
* [I2C](firmware-and-api-reference/pycom/machine/i2c.md)
|
||||
* [Pin](firmware-and-api-reference/pycom/machine/pin.md)
|
||||
* [PWM](firmware-and-api-reference/pycom/machine/pwm.md)
|
||||
* [RTC](firmware-and-api-reference/pycom/machine/rtc.md)
|
||||
* [SPI](firmware-and-api-reference/pycom/machine/spi.md)
|
||||
* [UART](firmware-and-api-reference/pycom/machine/uart.md)
|
||||
* [WDT](firmware-and-api-reference/pycom/machine/wdt.md)
|
||||
* [Timer](firmware-and-api-reference/pycom/machine/timer.md)
|
||||
* [SD](firmware-and-api-reference/pycom/machine/sd.md)
|
||||
* [CAN](firmware-and-api-reference/pycom/machine/can.md)
|
||||
* [RMT](firmware-and-api-reference/pycom/machine/rmt.md)
|
||||
* [network](firmware-and-api-reference/pycom/network/README.md)
|
||||
* [WLAN](firmware-and-api-reference/pycom/network/wlan.md)
|
||||
* [Server](firmware-and-api-reference/pycom/network/server.md)
|
||||
* [Bluetooth](firmware-and-api-reference/pycom/network/bluetooth/README.md)
|
||||
* [GATT](firmware-and-api-reference/pycom/network/bluetooth/gatt.md)
|
||||
* [GATTCConnection](firmware-and-api-reference/pycom/network/bluetooth/gattcconnection.md)
|
||||
* [GATTCService](firmware-and-api-reference/pycom/network/bluetooth/gattccservice.md)
|
||||
* [GATTCCharacteristic](firmware-and-api-reference/pycom/network/bluetooth/gattccharacteristic.md)
|
||||
* [GATTSService](firmware-and-api-reference/pycom/network/bluetooth/gattsservice.md)
|
||||
* [GATTSCharacteristic](firmware-and-api-reference/pycom/network/bluetooth/gattscharacteristic.md)
|
||||
* [LoRa](firmware-and-api-reference/pycom/network/lora.md)
|
||||
* [Sigfox](firmware-and-api-reference/pycom/network/sigfox.md)
|
||||
* [LTE](firmware-and-api-reference/pycom/network/lte.md)
|
||||
* [AES](firmware-and-api-reference/pycom/aes.md)
|
||||
* [pycom](firmware-and-api-reference/pycom/pycom.md)
|
||||
* [MicroPython Modules](firmware-and-api-reference/micropython/README.md)
|
||||
* [micropython](firmware-and-api-reference/micropython/micropython.md)
|
||||
* [uctypes](firmware-and-api-reference/micropython/uctypes.md)
|
||||
* [sys](firmware-and-api-reference/micropython/sys.md)
|
||||
* [uos](firmware-and-api-reference/micropython/uos.md)
|
||||
* [array](firmware-and-api-reference/micropython/array.md)
|
||||
* [cmath](firmware-and-api-reference/micropython/cmath.md)
|
||||
* [math](firmware-and-api-reference/micropython/math.md)
|
||||
* [gc](firmware-and-api-reference/micropython/gc.md)
|
||||
* [ubinascii](firmware-and-api-reference/micropython/ubinascii.md)
|
||||
* [ujson](firmware-and-api-reference/micropython/ujson.md)
|
||||
* [ure](firmware-and-api-reference/micropython/ure.md)
|
||||
* [usocket](firmware-and-api-reference/micropython/usocket.md)
|
||||
* [select](firmware-and-api-reference/micropython/select.md)
|
||||
* [utime](firmware-and-api-reference/micropython/utime.md)
|
||||
* [uhashlib](firmware-and-api-reference/micropython/uhashlib.md)
|
||||
* [ussl](firmware-and-api-reference/micropython/ussl.md)
|
||||
* [ucrypto](firmware-and-api-reference/micropython/ucrypto.md)
|
||||
* [ustruct](firmware-and-api-reference/micropython/ustruct.md)
|
||||
* [\_thread](firmware-and-api-reference/micropython/_thread.md)
|
||||
* [Builtin](firmware-and-api-reference/micropython/builtin.md)
|
||||
* [Notes](firmware-and-api-reference/notes.md)
|
||||
* [Introduction](firmwareapi/introduction.md)
|
||||
* [Pycom Modules](firmwareapi/pycom/README.md)
|
||||
* [machine](firmwareapi/pycom/machine/README.md)
|
||||
* [ADC](firmwareapi/pycom/machine/adc.md)
|
||||
* [DAC](firmwareapi/pycom/machine/dac.md)
|
||||
* [I2C](firmwareapi/pycom/machine/i2c.md)
|
||||
* [Pin](firmwareapi/pycom/machine/pin.md)
|
||||
* [PWM](firmwareapi/pycom/machine/pwm.md)
|
||||
* [RTC](firmwareapi/pycom/machine/rtc.md)
|
||||
* [SPI](firmwareapi/pycom/machine/spi.md)
|
||||
* [UART](firmwareapi/pycom/machine/uart.md)
|
||||
* [WDT](firmwareapi/pycom/machine/wdt.md)
|
||||
* [Timer](firmwareapi/pycom/machine/timer.md)
|
||||
* [SD](firmwareapi/pycom/machine/sd.md)
|
||||
* [CAN](firmwareapi/pycom/machine/can.md)
|
||||
* [RMT](firmwareapi/pycom/machine/rmt.md)
|
||||
* [network](firmwareapi/pycom/network/README.md)
|
||||
* [WLAN](firmwareapi/pycom/network/wlan.md)
|
||||
* [Server](firmwareapi/pycom/network/server.md)
|
||||
* [Bluetooth](firmwareapi/pycom/network/bluetooth/README.md)
|
||||
* [GATT](firmwareapi/pycom/network/bluetooth/gatt.md)
|
||||
* [GATTCConnection](firmwareapi/pycom/network/bluetooth/gattcconnection.md)
|
||||
* [GATTCService](firmwareapi/pycom/network/bluetooth/gattccservice.md)
|
||||
* [GATTCCharacteristic](firmwareapi/pycom/network/bluetooth/gattccharacteristic.md)
|
||||
* [GATTSService](firmwareapi/pycom/network/bluetooth/gattsservice.md)
|
||||
* [GATTSCharacteristic](firmwareapi/pycom/network/bluetooth/gattscharacteristic.md)
|
||||
* [LoRa](firmwareapi/pycom/network/lora.md)
|
||||
* [Sigfox](firmwareapi/pycom/network/sigfox.md)
|
||||
* [LTE](firmwareapi/pycom/network/lte.md)
|
||||
* [AES](firmwareapi/pycom/aes.md)
|
||||
* [pycom](firmwareapi/pycom/pycom.md)
|
||||
* [MicroPython Modules](firmwareapi/micropython/README.md)
|
||||
* [micropython](firmwareapi/micropython/micropython.md)
|
||||
* [uctypes](firmwareapi/micropython/uctypes.md)
|
||||
* [sys](firmwareapi/micropython/sys.md)
|
||||
* [uos](firmwareapi/micropython/uos.md)
|
||||
* [array](firmwareapi/micropython/array.md)
|
||||
* [cmath](firmwareapi/micropython/cmath.md)
|
||||
* [math](firmwareapi/micropython/math.md)
|
||||
* [gc](firmwareapi/micropython/gc.md)
|
||||
* [ubinascii](firmwareapi/micropython/ubinascii.md)
|
||||
* [ujson](firmwareapi/micropython/ujson.md)
|
||||
* [ure](firmwareapi/micropython/ure.md)
|
||||
* [usocket](firmwareapi/micropython/usocket.md)
|
||||
* [select](firmwareapi/micropython/select.md)
|
||||
* [utime](firmwareapi/micropython/utime.md)
|
||||
* [uhashlib](firmwareapi/micropython/uhashlib.md)
|
||||
* [ussl](firmwareapi/micropython/ussl.md)
|
||||
* [ucrypto](firmwareapi/micropython/ucrypto.md)
|
||||
* [ustruct](firmwareapi/micropython/ustruct.md)
|
||||
* [\_thread](firmwareapi/micropython/_thread.md)
|
||||
* [Builtin](firmwareapi/micropython/builtin.md)
|
||||
* [Notes](firmwareapi/notes.md)
|
||||
|
||||
## Product Info
|
||||
|
||||
* [Introduction](product-info/introduction.md)
|
||||
* [Development Modules](product-info/development/README.md)
|
||||
* [WiPy 2.0](product-info/development/wipy2.md)
|
||||
* [WiPy 3.0](product-info/development/wipy3.md)
|
||||
* [LoPy](product-info/development/lopy.md)
|
||||
* [LoPy 4](product-info/development/lopy4.md)
|
||||
* [SiPy](product-info/development/sipy.md)
|
||||
* [GPy](product-info/development/gpy.md)
|
||||
* [FiPy](product-info/development/fipy.md)
|
||||
* [OEM Modules](product-info/oem/README.md)
|
||||
* [W01](product-info/oem/w01.md)
|
||||
* [L01](product-info/oem/l01.md)
|
||||
* [L04](product-info/oem/l04.md)
|
||||
* [G01](product-info/oem/g01.md)
|
||||
* [L01 OEM Baseboard Reference](product-info/oem/l01_reference.md)
|
||||
* [Universal OEM Baseboard Reference](product-info/oem/universal_reference.md)
|
||||
* [Expansion Boards and Shields](product-info/boards/README.md)
|
||||
* [Expansion Board 3.0](product-info/boards/expansion3.md)
|
||||
* [Pytrack](product-info/boards/pytrack.md)
|
||||
* [Pysense](product-info/boards/pysense.md)
|
||||
* [Pyscan](product-info/boards/pyscan.md)
|
||||
* [Expansion Board 2.0](product-info/boards/expansion2.md)
|
||||
* [Deep Sleep Shield](product-info/boards/deepsleep/README.md)
|
||||
* [Deep Sleep API](product-info/boards/deepsleep/api.md)
|
||||
* [Notes](product-info/notes.md)
|
||||
* [Introduction](datasheets/introduction.md)
|
||||
* [Development Modules](datasheets/development/README.md)
|
||||
* [WiPy 2.0](datasheets/development/wipy2.md)
|
||||
* [WiPy 3.0](datasheets/development/wipy3.md)
|
||||
* [LoPy](datasheets/development/lopy.md)
|
||||
* [LoPy 4](datasheets/development/lopy4.md)
|
||||
* [SiPy](datasheets/development/sipy.md)
|
||||
* [GPy](datasheets/development/gpy.md)
|
||||
* [FiPy](datasheets/development/fipy.md)
|
||||
* [OEM Modules](datasheets/oem/README.md)
|
||||
* [W01](datasheets/oem/w01.md)
|
||||
* [L01](datasheets/oem/l01.md)
|
||||
* [L04](datasheets/oem/l04.md)
|
||||
* [G01](datasheets/oem/g01.md)
|
||||
* [L01 OEM Baseboard Reference](datasheets/oem/l01_reference.md)
|
||||
* [Universal OEM Baseboard Reference](datasheets/oem/universal_reference.md)
|
||||
* [Expansion Boards and Shields](datasheets/boards/README.md)
|
||||
* [Expansion Board 3.0](datasheets/boards/expansion3.md)
|
||||
* [Pytrack](datasheets/boards/pytrack.md)
|
||||
* [Pysense](datasheets/boards/pysense.md)
|
||||
* [Pyscan](datasheets/boards/pyscan.md)
|
||||
* [Expansion Board 2.0](datasheets/boards/expansion2.md)
|
||||
* [Deep Sleep Shield](datasheets/boards/deepsleep/README.md)
|
||||
* [Deep Sleep API](datasheets/boards/deepsleep/api.md)
|
||||
* [Notes](datasheets/notes.md)
|
||||
|
||||
## Pybytes
|
||||
|
||||
@@ -190,19 +190,19 @@
|
||||
|
||||
## Documentation Notes
|
||||
|
||||
* [Introduction](documentation-notes/introduction.md)
|
||||
* [Syntax](documentation-notes/syntax.md)
|
||||
* [REPL vs Scripts](documentation-notes/replscript.md)
|
||||
* [Mesh Networks](documentation-notes/mesh-networks.md)
|
||||
* [Introduction](docnotes/introduction.md)
|
||||
* [Syntax](docnotes/syntax.md)
|
||||
* [REPL vs Scripts](docnotes/replscript.md)
|
||||
* [Mesh Networks](docnotes/mesh-networks.md)
|
||||
|
||||
## Advanced Topics
|
||||
|
||||
* [Firmware Downgrade](advanced-topics/downgrade.md)
|
||||
* [CLI Updater](advanced-topics/cli.md)
|
||||
* [SecureBoot and Encryption](advanced-topics/encryption.md)
|
||||
* [License](advanced-topics/license.md)
|
||||
* [Firmware Downgrade](advance/downgrade.md)
|
||||
* [CLI Updater](advance/cli.md)
|
||||
* [SecureBoot and Encryption](advance/encryption.md)
|
||||
|
||||
## Have a question?
|
||||
|
||||
* [Ask on the Forum](https://forum.pycom.io)
|
||||
* [License](have-a-question/license.md)
|
||||
|
||||
|
||||
@@ -325,7 +325,7 @@ To restore your OTA block: `$pycom-fwtool-cli -p PORT ota -r -f backup.ota`
|
||||
|
||||
#### lpwan
|
||||
|
||||
Get/Set LPWAN parameters saved to non-volatile storage. Please see [here](../firmware-and-api-reference/pycom/network/lora.md##loranvramsave) for more details.
|
||||
Get/Set LPWAN parameters saved to non-volatile storage. Please see [here](../firmwareapi/pycom/network/lora.md##loranvramsave) for more details.
|
||||
|
||||
```text
|
||||
usage: pycom-fwtool-cli -p PORT lpwan [-h] [--region REGION]
|
||||
@@ -40,5 +40,5 @@ The specsheet of the Expansion Board is available as a PDF File.
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
* If PIC stays in bootloader mode, the [`dfu-util` update](../../pytrack-pysense-pyscan/installation/firmware.md) should be performed
|
||||
* If PIC stays in bootloader mode, the [`dfu-util` update](../../pytrackpysense/installation/firmware.md) should be performed
|
||||
|
||||
@@ -21,7 +21,7 @@ Libraries for the rest of the components will be added soon.
|
||||
|
||||
## Driver
|
||||
|
||||
The Windows 7 driver for Pyscan is located [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
The Windows 7 driver for Pyscan is located [here](../../pytrackpysense/installation/firmware.md).
|
||||
|
||||
For other Operating Systems there's no driver required.
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: [Buy Here](http://www.pycom.io/fipy)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/fipy.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/fipy.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -48,13 +48,13 @@ The AT commands for the Sequans Monarch modem on the FiPy are available in a PDF
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the FiPy module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the FiPy:
|
||||
Tutorials on how to the FiPy module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the FiPy:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials-and-examples/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials-and-examples/lora/lorawan-nano-gateway.md)
|
||||
* [Sigfox](../../tutorials-and-examples/sigfox.md)
|
||||
* [LTE CAT-M1](../../tutorials-and-examples/lte/cat-m1.md)
|
||||
* [NB-IoT](../../tutorials-and-examples/lte/nb-iot.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials/lora/lorawan-nano-gateway.md)
|
||||
* [Sigfox](../../tutorials/sigfox.md)
|
||||
* [LTE CAT-M1](../../tutorials/lte/cat-m1.md)
|
||||
* [NB-IoT](../../tutorials/lte/nb-iot.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: [Buy Here](http://www.pycom.io/gpy)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/gpy.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/gpy.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -48,10 +48,10 @@ The AT commands for the Sequans Monarch modem on the GPy are available in a PDF
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the GPy module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the GPy:
|
||||
Tutorials on how to the GPy module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the GPy:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LTE CAT-M1](../../tutorials-and-examples/lte/cat-m1.md)
|
||||
* [NB-IoT](../../tutorials-and-examples/lte/nb-iot.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LTE CAT-M1](../../tutorials/lte/cat-m1.md)
|
||||
* [NB-IoT](../../tutorials/lte/nb-iot.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: [Buy Here](http://www.pycom.io/lopy)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/lopy.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/lopy.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -40,10 +40,10 @@ Due to a couple issues with the LoPy design the module draws more current than i
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the LoPy module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the LoPy:
|
||||
Tutorials on how to the LoPy module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the LoPy:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials-and-examples/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials-and-examples/lora/lorawan-nano-gateway.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials/lora/lorawan-nano-gateway.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: [Buy Here](http://www.pycom.io/lopy4)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/lopy4.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/lopy4.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -38,11 +38,11 @@ The `Vin` pin on the LoPy4 can be supplied with a voltage ranging from `3.5v` to
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the LoPy4 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the LoPy4:
|
||||
Tutorials on how to the LoPy4 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the LoPy4:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials-and-examples/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials-and-examples/lora/lorawan-nano-gateway.md)
|
||||
* [Sigfox](../../tutorials-and-examples/sigfox.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials/lora/lorawan-nano-gateway.md)
|
||||
* [Sigfox](../../tutorials/sigfox.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: [Buy Here](http://www.pycom.io/sipy)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/sipy.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/sipy.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -40,9 +40,9 @@ Due to a couple issues with the SiPy design the module draws more current than i
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the SiPy module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the SiPy:
|
||||
Tutorials on how to the SiPy module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the SiPy:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [Sigfox](../../tutorials-and-examples/sigfox.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [Sigfox](../../tutorials/sigfox.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: Discontinued, See [WiPy3](wipy3.md)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/wipy.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/wipy.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -40,8 +40,8 @@ Due to a couple issues with the WiPy2 design the module draws more current than
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the WiPy2 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the WiPy2:
|
||||
Tutorials on how to the WiPy2 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the WiPy2:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
**Store**: [Buy Here](http://www.pycom.io/wipy-3)
|
||||
|
||||
**Getting Started:** [Click Here](../../getting-started/connection/wipy.md)
|
||||
**Getting Started:** [Click Here](../../gettingstarted/connection/wipy.md)
|
||||
|
||||
## Pinout
|
||||
|
||||
@@ -45,8 +45,8 @@ The `Vin` pin on the WiPy3 can be supplied with a voltage ranging from `3.5v` to
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the WiPy3 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the WiPy3:
|
||||
Tutorials on how to the WiPy3 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the WiPy3:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -34,10 +34,10 @@ The AT commands for the Sequans Monarch modem on the G01 are available in a PDF
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the G01 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the G01:
|
||||
Tutorials on how to the G01 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the G01:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LTE CAT-M1](../../tutorials-and-examples/lte/cat-m1.md)
|
||||
* [NB-IoT](../../tutorials-and-examples/lte/nb-iot.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LTE CAT-M1](../../tutorials/lte/cat-m1.md)
|
||||
* [NB-IoT](../../tutorials/lte/nb-iot.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -28,10 +28,10 @@ Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MIS
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the L01 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the L01:
|
||||
Tutorials on how to the L01 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the L01:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials-and-examples/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials-and-examples/lora/lorawan-nano-gateway.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials/lora/lorawan-nano-gateway.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -28,11 +28,11 @@ Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MIS
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the L04 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the L04:
|
||||
Tutorials on how to the L04 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the L04:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials-and-examples/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials-and-examples/lora/lorawan-nano-gateway.md)
|
||||
* [Sigfox](../../tutorials-and-examples/sigfox.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [LoRaWAN node](../../tutorials/lora/lorawan-abp.md)
|
||||
* [LoRaWAN nano gateway](../../tutorials/lora/lorawan-nano-gateway.md)
|
||||
* [Sigfox](../../tutorials/sigfox.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -28,8 +28,8 @@ Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MIS
|
||||
|
||||
## Tutorials
|
||||
|
||||
Tutorials on how to the W01 module can be found in the [examples](../../tutorials-and-examples/introduction.md) section of this documentation. The following tutorials might be of specific interest for the W01:
|
||||
Tutorials on how to the W01 module can be found in the [examples](../../tutorials/introduction.md) section of this documentation. The following tutorials might be of specific interest for the W01:
|
||||
|
||||
* [WiFi connection](../../tutorials-and-examples/all/wlan.md)
|
||||
* [BLE](../../tutorials-and-examples/all/ble.md)
|
||||
* [WiFi connection](../../tutorials/all/wlan.md)
|
||||
* [BLE](../../tutorials/all/ble.md)
|
||||
|
||||
@@ -12,7 +12,7 @@ The GPy and FiPy support both new LTE-M protocols:
|
||||
{% endhint %}
|
||||
|
||||
{% hint style="info" %}
|
||||
The Sequans modem used on Pycom's cellular enabled modules can only work in one of these modes at a time. In order to switch between the two protocols you need to flash a different firmware to the Sequans modem. Instructions for this can be found [here](../../../tutorials-and-examples/lte/firmware.md).
|
||||
The Sequans modem used on Pycom's cellular enabled modules can only work in one of these modes at a time. In order to switch between the two protocols you need to flash a different firmware to the Sequans modem. Instructions for this can be found [here](../../../tutorials/lte/firmware.md).
|
||||
{% endhint %}
|
||||
|
||||
## AT Commands
|
||||
@@ -13,7 +13,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Exp Board 3.0" %}
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* When using the expansion board with a FiPy, you will need to remove the CTS and RTS jumpers as these interfere with communication with the cellular modem.
|
||||
* Look for the reset button on the module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the expansion board.
|
||||
@@ -23,7 +23,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Pytrack/Pysense/Pyscan" %}
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the FiPy module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the Pysense/Pytrack/Pyscan.
|
||||
* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. 
|
||||
@@ -96,7 +96,7 @@ If you intend on using the LTE CAT-M1 or NB-IoT connectivity of the FiPy you **m
|
||||
|
||||
### WiFi/Bluetooth \(optional\)
|
||||
|
||||
All Pycom modules, including the FiPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the FiPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmware-and-api-reference/pycom/network/wlan.md)
|
||||
All Pycom modules, including the FiPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the FiPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
|
||||
|
||||
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Exp Board 3.0" %}
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the expansion board.
|
||||
* Insert the GPy module on the Expansion Board with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
|
||||
@@ -21,7 +21,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Pytrack/Pysense/Pyscan" %}
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the GPy module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the Pysense/Pytrack/Pyscan.
|
||||
* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. 
|
||||
@@ -73,7 +73,7 @@ If you intend on using the LTE CAT-M1 or NB-IoT connectivity of the GPy you **mu
|
||||
|
||||
### WiFi/Bluetooth \(optional\)
|
||||
|
||||
All Pycom modules, including the GPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the GPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmware-and-api-reference/pycom/network/wlan.md)
|
||||
All Pycom modules, including the GPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the GPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
|
||||
|
||||
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Exp Board 3.0" %}
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the expansion board.
|
||||
* Insert the LoPy module on the Expansion Board with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
|
||||
@@ -21,7 +21,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Pytrack/Pysense/Pyscan" %}
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the LoPy module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the Pysense/Pytrack/Pyscan.
|
||||
* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. 
|
||||
@@ -84,7 +84,7 @@ The LoPy only supports LoRa on the 868MHz or 915MHz bands. It does not support 4
|
||||
|
||||
### WiFi/Bluetooth \(optional\)
|
||||
|
||||
All Pycom modules, including the LoPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmware-and-api-reference/pycom/network/wlan.md)
|
||||
All Pycom modules, including the LoPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
|
||||
|
||||
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Exp Board 3.0" %}
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the expansion board.
|
||||
* Insert the LoPy4 module on the Expansion Board with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
|
||||
@@ -21,7 +21,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Pytrack/Pysense/Pyscan" %}
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the LoPy4 module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the Pysense/Pytrack/Pyscan.
|
||||
* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. 
|
||||
@@ -80,7 +80,7 @@ If you intend on using the LoRa/Sigfox connectivity of the LoPy4 you **must** co
|
||||
|
||||
### WiFi/Bluetooth \(optional\)
|
||||
|
||||
All Pycom modules, including the LoPy4, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy4 in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmware-and-api-reference/pycom/network/wlan.md)
|
||||
All Pycom modules, including the LoPy4, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the LoPy4 in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
|
||||
|
||||
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Exp Board 3.0" %}
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the expansion board.
|
||||
* Insert the SiPy module on the Expansion Board with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
|
||||
@@ -21,7 +21,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Pytrack/Pysense/Pyscan" %}
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the SiPy module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the Pysense/Pytrack/Pyscan.
|
||||
* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. 
|
||||
@@ -80,7 +80,7 @@ If you intend on using the Sigfox connectivity of the SiPy you **must** connect
|
||||
|
||||
### WiFi/Bluetooth \(optional\)
|
||||
|
||||
All Pycom modules, including the FiPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the FiPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmware-and-api-reference/pycom/network/wlan.md)
|
||||
All Pycom modules, including the FiPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the FiPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
|
||||
|
||||
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Exp Board 3.0" %}
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to an Expansion Board 3.0, you should update the firmware on the Expansion Board 3.0. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the expansion board.
|
||||
* Insert the WiPy module on the Expansion Board with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
|
||||
@@ -21,7 +21,7 @@
|
||||
{% endtab %}
|
||||
|
||||
{% tab title="Pytrack/Pysense/Pyscan" %}
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
* Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
* Look for the reset button on the WiPy module \(located at a corner of the board, next to the LED\).
|
||||
* Locate the USB connector on the Pysense/Pytrack/Pyscan.
|
||||
* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. 
|
||||
@@ -65,7 +65,7 @@ Please ensure you have the signal level of the UART adapter set to `3.3v` before
|
||||
|
||||
### WiFi/Bluetooth \(optional\)
|
||||
|
||||
All Pycom modules, including the WiPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the WiPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmware-and-api-reference/pycom/network/wlan.md)
|
||||
All Pycom modules, including the WiPy, come with a on-board WiFi antenna as well as a U.FL connector for an external antenna. The external antenna is optional and only required if you need better performance or are mounting the WiPy in such a way that the WiFi signal is blocked. Switching between the antennas is done via software, instructions for this can be found [here.](../../firmwareapi/pycom/network/wlan.md)
|
||||
|
||||
|
||||
|
||||
@@ -9,7 +9,7 @@ Here are the download links to the update tool. Please download the appropriate
|
||||
* [Linux](https://software.pycom.io/findupgrade?product=pycom-firmware-updater&type=all&platform=unix&redirect=true) \(requires `dialog` and `python-serial` package\)
|
||||
|
||||
{% hint style="info" %}
|
||||
Previous versions of firmware are available for download [**here**](../../advanced-topics/downgrade.md).
|
||||
Previous versions of firmware are available for download [**here**](../../advance/downgrade.md).
|
||||
{% endhint %}
|
||||
|
||||
## Updating Device Firmware
|
||||
@@ -40,7 +40,7 @@ If you are having any issues, make sure the **TX and RX jumpers** are present on
|
||||
When using a Pysense/Pytrack/Pyscan/Expansion Board 3.0 to update your module you are not required to make a connection between `G23` and `GND`, the Pysense/Pytrack/Pyscan/Expansion Board 3.0 will do this automatically.
|
||||
{% endhint %}
|
||||
|
||||
1. Before connecting your module to a Pysense/Pytrack board, you should update the firmware on the Pysense/Pytrack. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
|
||||
1. Before connecting your module to a Pysense/Pytrack board, you should update the firmware on the Pysense/Pytrack. Instructions on how to do this can be found [here](../../pytrackpysense/installation/firmware.md).
|
||||
2. Disconnect your device from your computer
|
||||
3. Insert module into Expansion Board
|
||||
4. Reconnect the board via USB to your computer
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
To make it as easy as possible Pycom has developed a plugin for two popular text editors, called Pymakr. These plugins have been built and are available for the following platforms:
|
||||
|
||||
{% page-ref page="../../pymakr-plugin/installation/atom.md" %}
|
||||
{% page-ref page="../../pymakr/installation/atom.md" %}
|
||||
|
||||
{% page-ref page="../../pymakr-plugin/installation/vscode.md" %}
|
||||
{% page-ref page="../../pymakr/installation/vscode.md" %}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user