Merge pull request #250 from pycom/pymakr-2.0-update

Pymakr 2.0 update

content/pymakr/installation/atom.md

@@ -8,21 +8,22 @@ aliases:
 
 For beginners, users getting started with MicroPython & Pycom as well as Atom text editor users, we recommend the **Pymakr Plugin for Atom**. This section will help you get started using the Atom Text Editor & Pymakr Plugin.
 
-Please follow these steps to install the Pymakr Plugin:
+Please follow these steps to install the [Pymakr Plugin](https://atom.io/packages/pymakr):
+
+1. [Download and install](https://atom.io) Atom. Ensure that you have Atom installed and open.
 
-1. Ensure that you have the latest Atom installed and open.
 ![](/gitbook/assets/atom_setup_step_1-1.png)
 
-1. Navigate to the Install page, via `Atom > Preferences > Install`
+2. Navigate to the Install page, via `Atom > Preferences > Install`
 ![](/gitbook/assets/atom_setup_step_2-1.png)
 
-1. Search for `Pymakr` and select the official Pycom Pymakr Plugin.
+3. Search for `Pymakr` and select the official Pycom Pymakr Plugin.
 ![](/gitbook/assets/atom_setup_step_3-1.png)
 
-1. You should now see and click the Install button. This will download and install the Pymakr Plugin.
+4. You should now see and click the Install button. This will download and install the Pymakr Plugin.
 ![](/gitbook/assets/atom_setup_step_4-1.png)
 
-1. That's it! You've installed the Pymakr Plugin for Atom.
+5. That's it! You've installed the Pymakr Plugin for Atom.
 ![](/gitbook/assets/atom_setup_step_5-1.png)
 
 ## Connecting via Serial USB
@@ -35,19 +36,12 @@ After installing the Pymakr Plugin, you need to take a few seconds to configure
 1. Open Atom and ensure that the Pymakr Plugin has correctly installed.
 ![](/gitbook/assets/atom_config_step_2-1.png)
 
-1. Open the Pymakr console by clicking the `^` button, located in the lower right side of the Atom window.
-![](/gitbook/assets/atom_config_step_3%20%281%29.png)
+2. Pymakr has auto-connection enabled by default. In case your device hasn't connected right away, click on `Connect device` and then on your device.
 
-1. Click, `More` followed by `Get Serial Ports`. This will copy the serial address of your expansion board to your clipboard.
 ![](/gitbook/assets/atom_config_step_4.png)
 
-1. Navigate to `Settings > Global Settings`
-![](/gitbook/assets/atom_config_step_5.png)
+3. Now it should show three arrows `>>>`, indicating that you are connected!
 
-1. Paste the serial address you copied earlier into the text field `Device Address`
-![](/gitbook/assets/atom_config_step_6%20%281%29.png)
-
-1. Press connect and the Pymakr console should show three arrows `>>>`, indicating that you are connected
 ![](/gitbook/assets/atom_config_step_7%20%281%29.png)
 
 These settings can also be applied on a per project basis by clicking `Settings` then `Project Settings`. This will open a JSON file which you can edit to enter your desired settings.
@@ -61,10 +55,14 @@ This process is easiest with either a Pycom Expansion Board or a Pytrack/Pysense
 After installing the Pymakr Plugin, a device may be connected via the telnet interface. Please see the following steps:
 
 1. Ensure that Pycom device is turned on
-1. Connect the host computer to the WiFi Access Point named after your board (the SSID will be as follows e.g. `lopy-wlan-xxxx`, `wipy-wlan-xxxx`, etc.). The password is `www.pycom.io`.
-1. Follow the steps as above in the "Connecting via Serial USB" section but
-enter `192.168.4.1` as the address.
-1. The default username and password are `micro` and `python`, respectively.
-1. Click `Connect` in the Pymakr pane, Pymakr will now connect via telnet.
+2. Connect the host computer to the WiFi Access Point named after your board (the SSID will be as follows e.g. `lopy-wlan-xxxx`, `wipy-wlan-xxxx`, etc.). The password is `www.pycom.io`.
+3. Go to `Settings` > `Global Settings`
 
-![](/gitbook/assets/pymakr-plugin-settings-1.png)
+![](/gitbook/assets/atom_global_settings.png)
+
+4. In `Devices Addresses (List)`, enter `192.168.4.1` as the address.
+
+![](/gitbook/assets/atom_device_list.png)
+
+4. The default username and password are `micro` and `python`, respectively.
+5. Click `192.168.4.1` in the Devices List pane, Pymakr will now connect via telnet.

content/pymakr/installation/vscode.md

@@ -6,11 +6,11 @@ aliases:
     - chapter/pymakr/installation/vscode
 ---
 
-Pycom also supports Microsoft's Visual Studio Code IDE platform with the Pymakr Plugin. To download Visual Studio Code, navigate to [VS Code](https://code.visualstudio.com/).
+Pycom also supports Microsoft's Visual Studio Code IDE platform with the Pymakr Plugin. To download and install Visual Studio Code, navigate to [VS Code](https://code.visualstudio.com/).
 
 You will also need NodeJS installed on your PC. Please download the latest LTS version available [from the NodeJS website.](https://nodejs.org/)
 
-Please follow these steps to install the Pymakr VSCode Extension:
+Please follow these steps to install the [Pymakr VSCode Extension](https://marketplace.visualstudio.com/items?itemName=pycom.Pymakr):
 
 1. Ensure that you have the latest VSCode installed and open.