Update _index.md

content/pybytes/api/_index.md

@@ -3,6 +3,122 @@ title: "Pybytes library API"
 aliases:
 ---
 
+
+The Pybytes library is positioned in the [frozen](/advance/frozen/) section of the firmware. It can be imported like regular modules:
+```python
+from _pybytes import Pybytes
+pybytes = Pybytes()
+```
+
+
+## Provisioning
+
+### Pybytes.activate(activation string)
+
+Provision the device to Pybytes. Use the `activation string` provided in Pybytes to activate the device.
+
+### pybytes.read_config([filename='/flash/pybytes_config.json', reconnect=False])
+
+Load the Pybytes configuration file. By default, this is found in `/flash/pybytes_config.json`
+
+### pybytes.update_config(key, [value=None, permanent=True, silent=False, reconnect=False])
+
+Update a `key` and `value` of the default configuration file. additional options:
+* `permanent`: will call `pybytes.write_config()`. If set `False`, the update will not be stored in the configuration file.
+* `silent`: set `silent` parameter of above.
+* `reconnect`: calls `pybytes.reconnect()`
+
+### set_config([key=None, value=None, permanent=True, silent=False, reconnect=False])
+
+Same as `update_config(...)`
+
+### pybytes.write_config([file='/flash/pybytes_config.json', silent=False])
+
+Writes the updated configuration to the default configuration file. The parameters:
+* `file`: The file name and location
+* `silent`: Do not print anything
+
+### pybytes.print_config()
+
+Print the configuration settings to the REPL
+
+## Connection
+
+### pybytes.connect()
+
+Connect the device to Pybytes following the loaded configuration file. You will need to load a configuration file before calling this.
+
+### pybytes.start([autoconnect=True])
+
+Same as `pybytes.connect()`, with the option to not connect
+
+
+### pybytes.connect_lte()
+
+Connect to Pybytes using LTE and the settings from the configuration file.
+
+### pybytes.connect_wifi([reconnect=True, check_interval=0.5])
+
+Connect to Pybytes using WiFi and the settings from the configuration file.
+
+### pybytes.connect_sigfox()
+
+Connect to Pybytes using SigFox and the settings from the configuration file.
+
+### pybytes.connect_lora_otaa([timeout=120, nanogateway=False])
+
+Connect to Pybytes using LoRa OTAA and the settings from the configuration file.
+
+### pybytes.connect_lora_abp([timeout, nanogateway=False])
+
+Connect to Pybytes using LoRa ABP and the settings from the configuration file.
+
+### pybytes.disconnect()
+
+Disconnect from Pybytes gracefully. Closes the MQTT connection and socket.
+
+### pybytes.reconnect()
+
+Calls `pybytes.disconnect()` followed by `pybytes.connect()`
+
+### pybytes.isconnected()
+
+Returns the connection status to Pybytes, can be `True` or `False`.
+
+### pybytes.is_connected()
+
+Same as `pybytes.isconnected()`
+
+## Signals
+
+### pybytes.send_signal
+
+Note this will create a separate thread. 
+__class__       __init__        __module__      __qualname__
+start           __dict__        WAKEUP_ALL_LOW  WAKEUP_ANY_HIGH
+connect         deepsleep              
+
+send_custom_message             set_custom_message_callback
+send_ping_message               send_info_message
+send_scan_info_message          send_digital_pin_value
+send_analog_pin_value           send_node_signal
+send_signal     __periodical_pin_callback
+register_periodical_digital_pin_publish
+register_periodical_analog_pin_publish
+add_custom_method               enable_terminal
+send_battery_level              send_custom_location
+__recv_message  __process_protocol_message      
+export_config   enable_ssl
+enable_lte      dump_ca         activate        smart_config
+__smart_config_callback         __smart_config_setup
+__frozen        __activation    __custom_message_callback
+__config_updated                __pybytes_connection
+__smart_config  __conf          __pymesh        __conf_reader
+## Sending messages
+
+## Miscellaneous
+
+### pybytes.deepsleep()
 To test the Pybytes library API, connect your device to Pymakr and call the methods listed below.
 You can use the Pybytes library API in your MicroPython project.