shrink images on product pages

config.toml

@@ -1094,6 +1094,12 @@ theme = "doc-theme"
     identifier = "datasheets@boards@expansion3"
     parent = "datasheets@boards"
     weight = 70
+[[menu.main]]
+    name = "Deepsleep"
+    url = "/datasheets/expansionboards/deepsleep/"
+    identifier = "datasheets@boards@deepsleep"
+    parent = "datasheets@boards"
+    weight = 80
 
 
 

content/datasheets/development/fipy.md

@@ -33,7 +33,7 @@ The pinout of the FiPy is available as a [PDF File](/gitbook/assets/fipy-pinout.
 
 ![](/gitbook/assets/fipy-pinout.png)
 
-> Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MISO\) and I2C \(SDA, SCL\) are defaults and can be changed via software.
+> Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
 
 ## Notes
 

content/datasheets/development/wipy2.md

@@ -7,7 +7,7 @@ aliases:
     - chapter/datasheets/development/wipy2
 ---
 
-![](/gitbook/assets/wipy2-1.png)
+![](/gitbook/assets/wipy2.png)
 
 > Note: Orient the RGB LED / reset button over the USB connector on any expansion board 
 

content/datasheets/development/wipy3.md

@@ -7,7 +7,7 @@ aliases:
     - chapter/datasheets/development/wipy3
 ---
 
-![](/gitbook/assets/wipy3.png)
+![](/gitbook/assets/wipy2.png)
 
 > Note: Orient the RGB LED / reset button over the USB connector on any expansion board 
 

content/datasheets/expansionboards/_index.md

@@ -13,4 +13,5 @@ This section contains all of the datasheets for the Pycom Expansion Boards and S
 * [Pytrack 2.0 X](../expansionboards/pytrack2/)
 * [Pyscan](../expansionboards/pyscan/)
 * [Expansion 2](../expansionboards/expansion2/)
-* [Expansion 3](../expansionboards/expansion3/)
+* [Expansion 3](../expansionboards/expansion3/)
+* [Deepsleep](../expansionboards/deepsleep/)

content/datasheets/expansionboards/deepsleep.md

@@ -2,6 +2,12 @@
 title: "Deep Sleep Shield"
 aliases:
 ---
+
+![](/gitbook/assets/deepsleep-image-1.jpg)
+
+**Store**: Discontinued
+
+
 >The Deep Sleep Shield works very similar to how the Pysense / Pytrack sleep modes work
 
 The schematic of the Deep Sleep Shield is available as a [PDF File](/gitbook/assets/deepsleep-schematic.pdf)
@@ -18,5 +24,4 @@ The pinout of the Deep Sleep Shield is available as a [PDF File](/gitbook/assets
 To correctly connect a WiPy 2.0, LoPy or SiPy to the Deep Sleep Shield, align the white triangle on the Shield with the LED of the Pycom Device. Once the Pycom Device is seated onto the Deep Sleep Shield, this can then be connected to the Expansion Board
 {{% /hint %}}
 
-![](/gitbook/assets/deepsleep-image-1.jpg)
 

content/datasheets/oem/g01.md

@@ -7,7 +7,7 @@ aliases:
     - chapter/datasheets/oem/g01
 ---
 
-## ![](/gitbook/assets/g01-1%20%282%29.png)
+![](/gitbook/assets/g01-1.png)
 
 ## Datasheet