sascha_hemi/pycom-documentation
1
0
Fork 0
mirror of https://github.com/sascha-hemi/pycom-documentation.git synced 2026-03-21 13:06:14 +01:00
Code Issues Packages Projects Releases Wiki Activity

fix numbering

Browse Source
This commit is contained in:
Peter Putz
2019-10-25 13:36:12 +02:00
parent 73dacd0ad7
commit d7d2a562da
1 changed files with 15 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files

45
content/pymakr/installation/atom.md
View File

@@ -11,23 +11,18 @@ For beginners, users getting started with MicroPython & Pycom as well as Atom te
Please follow these steps to install the Pymakr Plugin:
1. Ensure that you have Atom installed and open.
![](/gitbook/assets/atom_setup_step_1-1.png)
2. Navigate to the Install page, via `Atom > Preferences > Install`
1. Navigate to the Install page, via `Atom > Preferences > Install`
![](/gitbook/assets/atom_setup_step_2-1.png)
3. Search for `Pymakr` and select the official Pycom Pymakr Plugin.
1. Search for `Pymakr` and select the official Pycom Pymakr Plugin.
![](/gitbook/assets/atom_setup_step_3-1.png)
4. You should now see and click the Install button. This will download and install the Pymakr Plugin.
1. You should now see and click the Install button. This will download and install the Pymakr Plugin.
![](/gitbook/assets/atom_setup_step_4-1.png)
5. That's it! You've installed the Pymakr Plugin for Atom.
1. That's it! You've installed the Pymakr Plugin for Atom.
![](/gitbook/assets/atom_setup_step_5-1.png)
## Connecting via Serial USB
@@ -35,31 +30,24 @@ Please follow these steps to install the Pymakr Plugin:
After installing the Pymakr Plugin, you need to take a few seconds to configure it for first time use. Please follow these steps:
1. Connect your Pycom device to your computer via USB. If you are using an Expansion Board 2.0, and have just finished a firmware upgrade, be sure to **remove the wire between GND and G23** and reset your device by pressing the button.
Note: you don't need the wire for Expansion Board 3.0
2. Open Atom and ensure that the Pymakr Plugin has correctly installed.
1. Open Atom and ensure that the Pymakr Plugin has correctly installed.
![](/gitbook/assets/atom_config_step_2-1.png)
3. Open the Pymakr console by clicking the `^` button, located in the lower right side of the Atom window.
1. Open the Pymakr console by clicking the `^` button, located in the lower right side of the Atom window.
![](/gitbook/assets/atom_config_step_3%20%281%29.png)
4. Click, `More` followed by `Get Serial Ports`. This will copy the serial address of your expansion board to your clipboard.
1. Click, `More` followed by `Get Serial Ports`. This will copy the serial address of your expansion board to your clipboard.
![](/gitbook/assets/atom_config_step_4.png)
5. Navigate to `Settings > Global Settings`
1. Navigate to `Settings > Global Settings`
![](/gitbook/assets/atom_config_step_5.png)
6. Paste the serial address you copied earlier into the text field `Device Address`
1. Paste the serial address you copied earlier into the text field `Device Address`
![](/gitbook/assets/atom_config_step_6%20%281%29.png)
7. Press connect and the Pymakr console should show three arrows `>>>`, indicating that you are connected
1. Press connect and the Pymakr console should show three arrows `>>>`, indicating that you are connected
![](/gitbook/assets/atom_config_step_7%20%281%29.png)
These settings can also be applied on a per project basis by clicking `Settings` then `Project Settings`. This will open a JSON file which you can edit to enter your desired settings.
@@ -73,13 +61,10 @@ This process is easiest with either a Pycom Expansion Board or a Pytrack/Pysense
After installing the Pymakr Plugin, a device may be connected via the telnet interface. Please see the following steps:
1. Ensure that Pycom device is turned on
2. Connect the host computer to the WiFi Access Point named after your board (the SSID will be as follows e.g. `lopy-wlan-xxxx`, `wipy-wlan-xxxx`, etc.). The password is `www.pycom.io`.
3. Follow the steps as above in the "Connecting via Serial USB" section but
enter `192.168.4.1` as the address.
4. The default username and password are `micro` and `python`, respectively.
5. Click `Connect` in the Pymakr pane, Pymakr will now connect via telnet.
1. Connect the host computer to the WiFi Access Point named after your board (the SSID will be as follows e.g. `lopy-wlan-xxxx`, `wipy-wlan-xxxx`, etc.). The password is `www.pycom.io`.
1. Follow the steps as above in the "Connecting via Serial USB" section but
enter `192.168.4.1` as the address.
1. The default username and password are `micro` and `python`, respectively.
1. Click `Connect` in the Pymakr pane, Pymakr will now connect via telnet.
![](/gitbook/assets/pymakr-plugin-settings-1.png)