mirror of
https://github.com/sascha-hemi/pycom-documentation.git
synced 2026-03-21 18:06:13 +01:00
55 lines
1.8 KiB
Markdown
55 lines
1.8 KiB
Markdown
---
|
|
title: "REPL"
|
|
aliases:
|
|
- tutorials/all/repl.html
|
|
- tutorials/all/repl.md
|
|
- chapter/tutorials/all/repl
|
|
---
|
|
|
|
Using the Pymakr Plugin, open and connect a device or use serial terminal (PuTTY, screen, picocom, etc). Upon connecting, there should be a blank screen with a flashing cursor. Press Enter and a MicroPython prompt should appear, i.e. `>>>`. Let's make sure it is working with the obligatory test:
|
|
|
|
```python
|
|
|
|
>>> print("Hello LoPy!")
|
|
Hello LoPy!
|
|
```
|
|
|
|
In the example above, the `>>>` characters should not be typed. They are there to indicate that the text should be placed after the prompt. Once the text has been entered `print("Hello LoPy!")` and pressed `Enter`, the output should appear on screen, identical to the example above.
|
|
|
|
Basic Python commands can be tested out in a similar fashion.
|
|
|
|
If this is not working, try either a hard reset or a soft reset; see below.
|
|
|
|
Here are some other example, utilising the device's hardware features:
|
|
|
|
```python
|
|
|
|
>>> from machine import Pin
|
|
>>> led = Pin('G16', mode=Pin.OUT, value=1)
|
|
>>> led(0)
|
|
>>> led(1)
|
|
>>> led.toggle()
|
|
>>> 1 + 2
|
|
3
|
|
>>> 5 / 2
|
|
2.5
|
|
>>> 20 * 'py'
|
|
'pypypypypypypypypypypypypypypypypypypypy'
|
|
```
|
|
|
|
## Resetting the Device
|
|
|
|
If something goes wrong, the device can be reset with two methods. The first is to press `CTRL-D` at the MicroPython prompt, which will perform a soft reset. A message, as following, will appear:
|
|
|
|
```python
|
|
|
|
>>>
|
|
PYB: soft reboot
|
|
MicroPython v1.4.6-146-g1d8b5e5 on 2016-10-21; LoPy with ESP32
|
|
Type "help()" for more information.
|
|
>>>
|
|
```
|
|
|
|
If that still isn't working a hard reset can be performed (power-off/on) by pressing the `RST` switch (the small black button next to the RGB LED). Using telnet, this will end the session, disconnecting the program that was used to connect to the Pycom Device.
|
|
|