mirror of
https://github.com/sascha-hemi/pycom-documentation.git
synced 2026-03-21 09:04:12 +01:00
58 lines
2.0 KiB
Markdown
58 lines
2.0 KiB
Markdown
---
|
|
title: "FiPy"
|
|
aliases:
|
|
- datasheets/development/fipy.html
|
|
- datasheets/development/fipy.md
|
|
- product-info/development/fipy
|
|
- chapter/datasheets/development/fipy
|
|
---
|
|
|
|
|
|
|
|
> Note: Orient the RGB LED / reset button over the USB connector on any expansion board
|
|
|
|
|
|
|
|
**Store**: [Buy Here](https://pycom.io/product/fipy/)
|
|
|
|
**Getting Started:** [Click Here](/gettingstarted/)
|
|
|
|
|
|
## Datasheet
|
|
|
|
The datasheet of the FiPy is available as a [PDF File](/gitbook/assets/specsheets/Pycom_002_Specsheets_FiPy_v2.pdf)
|
|
|
|
### Antenna drawing
|
|
The drawing of the LTE-M antenna is available as a [PDF File](/gitbook/assets/lte-m-antenna-drawing.pdf).
|
|
|
|
### Certifications
|
|
The Fipy is certified for:
|
|
* [CE RED](/gitbook/assets/fipy_c03-b0-red-final.pdf)
|
|
* [FCC DSS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dss.pdf)
|
|
* [FCC DTS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dts.pdf)
|
|
* [FCC DXX](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dxx.pdf)
|
|
* [FCC TNB](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-tnb.pdf)
|
|
* [RCM](/gitbook/assets/RCM-FIPY.zip)
|
|
* [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-FiPy(8217-00091P)-20190523.pdf)
|
|
|
|
## Pinout
|
|
|
|
The pinout of the FiPy is available as a [PDF File](/gitbook/assets/fipy-pinout.pdf)
|
|
|
|
|
|
|
|
> Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
|
|
|
|
## Notes
|
|
|
|
### Power
|
|
Do not use the 3.3V pin **in combination with** the Vin pin to supply the device as this will damage the voltage regulator on the board.
|
|
|
|
### Antenna placement
|
|
Always attach the appropriate antenna when using a wireless connection (LoRa / LTE / SigFox). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code.
|
|
|
|
|
|
### AT Commands
|
|
|
|
The AT commands for the Sequans Monarch modem on the FiPy are available in a [PDF file](/gitbook/assets/Monarch-LR5110-ATCmdRefMan-rev6_noConfidential.pdf).
|