Nano AP Infos and Files added

2026-03-21 07:06:36 +01:00 · 2023-06-19 22:42:24 +02:00
parent 617b49eb86
commit 5ccbcb4719
7 changed files with 16 additions and 0 deletions
--- a/ATC1441/Antenna_FlexPCB_Gerber.rar
+++ b/ATC1441/Antenna_FlexPCB_Gerber.rar
--- a/ATC1441/NanoAP_Case.jpg
+++ b/ATC1441/NanoAP_Case.jpg
--- a/ATC1441/NanoAP_Case_V3.stl
+++ b/ATC1441/NanoAP_Case_V3.stl
--- a/ATC1441/NanoAP_Flapped.jpg
+++ b/ATC1441/NanoAP_Flapped.jpg
--- a/ATC1441/NanoAP_Gerber.rar
+++ b/ATC1441/NanoAP_Gerber.rar
--- a/ATC1441/NanoAP_PCB_soldered.jpg
+++ b/ATC1441/NanoAP_PCB_soldered.jpg
--- a/ATC1441/README.md
+++ b/ATC1441/README.md
@@ -0,0 +1,16 @@
+# 3D-printed ESP32-S2 Mini NanoAP with Flex PCB 
+
+## NanoAP by [ATC1441](https://github.com/atc1441)
+
+The NanoAP is build by using an 1.54" Display with an ZBS243 SoC and an ESP32 S2-Mini Dev-board(2MB SRAM Version)
+The Flex PCB does also fit on the 2.9" Display, the case will not fit then :D
+
+<img width="600" alt="NanoAP_Case" src="NanoAP_Case.jpg">
+
+<img width="600" alt="NanoAP_PCB_soldered" src="NanoAP_PCB_soldered.jpg">
+
+<img width="600" alt="NanoAP_Flapped" src="NanoAP_Flapped.jpg">
+
+- The "NanoAP_Case_V3.stl" Case is printed in one go standing up, 0.2mm Layer height no support, infill 20%
+- The Flex PCB can be ordered via the Gerber File "NanoAP_Gerber.rar"
+- The Antenna from the Original case needs to be replaced by either a ~3cm wire or the "Antenna_FlexPCB_Gerber.rar"