- neopixel patterns optimized. The 'breathing' led state now is green colored if everything is okay, and blue if there are one or more tags timed out.
- time zone is now set before wifi connect to show correct time zone in the logs during startup
- concurrent image upload POST is now blocked. If an upload is in progress while you do a second http POST, http status 409 Conflict is returned.
- small synchronisation bug fix in web interface on loading tag type
- dialog window close bugfix in painter
- image upload is now logged in /log.txt
* New hardware profile: PoE AP
- added harware profiles for C6 firmware in menuconfig
- added free PSRAM stat in webinterface
* fix(fsfree): fixed var type of freesize of FS
- neopixel idle color now represents AP status
- option to invert colors (advanced options at tag card)
- filename dropdown in tag card when a filename is expected
- redrawing pending instead of raw, if previews are off and tag reboots
- tft brightness setting independent from neopixel brightness
* Add formatString convenience function
* Use String& for wsLog, wsErr and wsSerial
* Add tag data parser and parse tag data
* Make logLine use String&
* Fix issue with formatString
* Reuse payloadLength in processTagReturnData
* Fix parsing of unsigned/signed inetegers and cleanup
* Use c++17 standard
* Cleanup logging
To flash the C6, place bootloader.bin, partition-table.bin and OpenEPaperLink_esp32_C6.bin in the file system root.
APconfig -> update -> advanced options -> update ESP32-C6
This should also work with a previous unconfigured C6.
Compatible with Yellow-AP.
- Wifi connection progress is now visible on the TFT
- passthrough serial logging from the C6 to the S3 terminal for easier debugging
- no checks on force_flash and APtag-firmware version when C6 is used
- clean up webproxy getExtUrl
- bugfix init multicast on wifi reconnect
- add ip address of remote AP that's taken over a tag
- renamed button 'edit contentFS' to 'file system'
- apconfig: configure night time, where the system is not updating tags, and the tags are sleeping
- fixed bug calculating expected checkin
- throttle down apinfo update to once per minute
- fixed too many concurrent requests getting tagtypes
- resend current image when a tag reboots and the content type is 'static image' (all other content types were already regenerating the content)
- fixed timing of main loop
* Reduce code size by removing nullptr assignments
* Optimize tagDB for loops
* More tagDB optimizations
* Remove static from language arrays reducing RAM by 5128b
- Reduces Flash by 13060b
* Add missing extern in tag_db.h
* Fix deprecation warning of sntp.h
* Remove static from contentmanager, reduces RAM by 184b
* Use string reference in prepareDataAvail
- Remove some unneeded buffers
- Remove some gotos
- AP info screen content card. Can run on any tag.
- now, you can use {variables} in the 'text' entries in a json template. You can set variables via a http call. If you update a variable, all tags with a json template containing that variable get updated.
- font name in json template is more flexible. You can just use 'filename.ttf' or 'filename.vlw'. A full path is still possible.
- colors in the json template can now be set using #rrggbb color values, and using 'black', 'white' or 'red'.
- added direct output for the TFT display for the yellow esp32-s3. No file writes needed.
- added POST variable 'ttl' to json template upload and image upload, to set the next checkin time
- added /variables-demo.html to demonstrate the variables.
- json templates received from jsonupload are now saved in /current, and reused.
- known issue: 'backup db' button doesn't work due to some browser policy change. Fixing.
thanks to @steinwedel for the inspiration on the variables and some other fixes.
- new: tagtypes are be defined via json in /tagtypes instead of hardcoded
- content template is moved to the tagtype definition
- optimalisation of spr2buffer (also uses psram now, if available)
- bugfixes in spiffseditor
- size fix in painter screen for large screens
- small layout fix current weather on 4.2"
- qr code content enabled again
- turned off temperature on esp32
- http 409 on http POST during OTA
- finetuning buitenradar scale and refresh time
- follow redirects on jsontemplate http call
This one saves a lot of flash space.
Now, wifimanager is replaced with our own method for managing the wifi connections.
Also, the whole thing will run now even if there is no wifi. If wifi disappears, it automatically tries to reconnect in the background every few minutes.
Wifi settings now available at all times at /setup
If it cannot connect, an access point 'OpenEPaperLink' is created where you can set the wifi credentials (http://192.168.4.1/setup).
So far the calculated size for the tagDB in the frontend was
purely based on the size of each of its static entries.
However the data pointer as well as the json based config string
can occupy additional memory which is not accounted for.
We are therefore introducing a helper function to properly
calculate the DBs size.
Signed-off-by: Mimoja <git@mimoja.de>
The SPIFFSEditor.h header is being imported from the .platformio folder
while the corresponding .cpp is actually stored with the project.
To ensure we can not accidentally edit the wrong file in the future import
the header as well
Signed-off-by: Mimoja <git@mimoja.de>
When an SD Card is available it is the more interesing
metric in terms of space usage. We are therefore using
it here.
Signed-off-by: Mimoja <git@mimoja.de>
To be able to store more images and never worry about running
out of storage again we are adding support of SDCards.
We are faced with two options:
1) Remove the LittleFS code
2) Allow for both FSs but increase the app partition as we run
out of space.
We have opted for 2 for two reasons:
1) Unformated SDCards can be initialized from the littleFS
2) If the SDCard and the flasher share the same SPI pins
the SDCard needs to be completely disconnected so there needs
to be a FS in that rare case.
Performance wise the SDCard is not slowing the system down.
Writing the AP db with 70 APs takes 2.5 seconds, on the SD
only 800ms. This however is SD and setup depending.
By default the SDCard is expected on pins 18,19,23 however this
is configurable via preprocessor defines.
Globally we replace LittleFS with a new pointer to the currently
used FS allowing for hotswapping where the FS pointer is not saved.
One case which is therefore not working is the SPIFSEditor which
copies the FS interally.
Signed-off-by: Mimoja <git@mimoja.de>
- fonts re-rendered: added äöüßÄÖÜ.
- shuffled a bit with fonts to optimize disk usage
- ability to delete files during OTA
- prettify tagDB.json
- error handling in get_DB
- small cosmetic changes
* Due to new ability to delete files: After firmware update via OTA, please perform an OTA update of the filesystem again to perform the deletion of unneeded fonts.
* If updating via platform.io: don't forget to update the filesystem image.
- add: syncing data segment of non-image datatypes between AP's
- add: syncing metadata and deletions between AP's
- sorted tags on the webpage by alias
