gzipped files

update tagtypes for M3 0027 firmware
M3 Universal v0027
2026-03-29 05:07:15 +02:00 · 2024-03-04 21:40:15 +01:00 · 2024-03-04 19:46:17 +01:00 · 2024-03-04 19:04:15 +01:00 · 2024-03-04 13:21:58 +01:00 · 2024-03-04 12:03:55 +01:00
131 changed files with 1934 additions and 8695 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -26,3 +26,4 @@
 sdcc/sdcc

 ESP32_AP-Flasher/.vscode/extensions.json
+ARM_Tag_FW\Newton_M3_nRF52811\$PROJECT_DIR
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA-0.2.bin
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA-0.2.bin
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA-0.2_ota.bin
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA-0.2_ota.bin
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA-0.3.bin
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA-0.3.bin
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA.bin
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.4_BETA.bin
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.5
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/88MZ100_7.5
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/Makefile
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/Makefile
@@ -10,7 +10,7 @@ OBJCOPY=$(ARMGCC)arm-none-eabi-objcopy
 #-Wall
 CC_WARNING_FLAGS=-Wall -Wformat=0 -Wattributes -Wstrict-aliasing=0
 CPP_FLAGS=-lstdc++ -mcpu=cortex-m3 -g -O3 -mthumb -fdata-sections -ffunction-sections -std=c++98 -std=gnu++0x
-CPP0_FLAGS=-lstdc++ -mcpu=cortex-m3 -g -O0 -mthumb -fdata-sections -ffunction-sections -std=c++98 -std=gnu++0x
+CPP0_FLAGS=-lstdc++ -mcpu=cortex-m3 -g -O0 -mthumb -fdata-sections -ffunction-sections -std=c++98 -std=gnu++0x 
 CC_FLAGS=-mcpu=cortex-m3 -g -O0 -mthumb -fdata-sections -ffunction-sections -std=c99
 CC3_FLAGS=-mcpu=cortex-m3 -g -O3 -mthumb -fdata-sections -ffunction-sections -std=c99
 CC_END_FLAGS=-lstdc++ -lc -lnosys -L. -T mz100/mz100.ld -fPIE --specs=nosys.specs -mcpu=cortex-m3 -mthumb -Wl,--gc-sections -O0 -flto -ffunction-sections -fdata-sections -DARM_GNU
@@ -64,23 +64,20 @@ compile:

 	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -Wno-unknown-pragmas -c ../common/QRCode/src/qrcode.c      -o build/qrcode.o

-
-
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c compression.cpp        -o build/compression.o

 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c drawing.cpp        -o build/drawing.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c epd_interface.cpp	-o build/epd_interface.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c powermgt.cpp        -o build/powermgt.o
-#	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c syncedproto.c        -o build/syncedproto.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLASGS) -c oepl-protocol.cpp -o build/oepl-protocol.o
 	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c comms.c        -o build/comms.o
-	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c md5.c        -o build/md5.o
-#	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c settings.c        -o build/settings.o
+	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c ../common/md5.c        -o build/md5.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c settings.cpp        -o build/settings.o
 	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c mz100/timer.c        -o build/timer.o
 	@$(CC) $(CC3_FLAGS) $(CC_WARNING_FLAGS) -c mz100/util.c        -o build/util.o
 	@$(CC) $(CC_FLAGS) $(CC_WARNING_FLAGS) -c mz100/gpio.c        -o build/gpio.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS)  -c uc8159-var-m2.cpp        -o build/uc8159-var-m2.o
+	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS)  -c uc8176-var-m2.cpp        -o build/uc8176-var-m2.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c userinterface.cpp	-o build/userinterface.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c main.cpp             -o build/main.o
 	@$(GPLUSPLUS) $(CPP_FLAGS) $(CC_WARNING_FLAGS) -c oepl_fs.cpp             -o build/oepl_fs.o
@@ -102,7 +99,8 @@ compile:
 		build/util.o \
 		build/md5.o \
 		build/gpio.o \
-		build/uc8159-var-m2.o \
+		build/uc8176-var-m2.o \
+                build/uc8159-var-m2.o \
 		build/mz100_sleep.o \
 		build/core_cm3.o \
 		build/qrcode.o \
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/bitmaps.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/bitmaps.h
@@ -1,292 +0,0 @@
-#ifndef _BITMAPS_H_
-#define _BITMAPS_H_
-
-// images generated by https://lvgl.io/tools/imageconverter, prepended with width, height. "CF_INDEXED_1_BIT"-mode, little-endian
-#include <stdint.h>
-
-#include "screen.h"
-
-const uint8_t norf[] = {
-    24,
-    24,
-    0x00,
-    0x00,
-    0x00,
-    0x70,
-    0xe0,
-    0x00,
-    0x79,
-    0xe0,
-    0x00,
-    0x7f,
-    0xe0,
-    0x00,
-    0x3f,
-    0xc0,
-    0x00,
-    0x1f,
-    0x80,
-    0x00,
-    0x1f,
-    0x80,
-    0x00,
-    0x3f,
-    0xc0,
-    0x00,
-    0x7f,
-    0xe0,
-    0x0e,
-    0x79,
-    0xe0,
-    0x0a,
-    0x70,
-    0xe0,
-    0x0a,
-    0x00,
-    0x00,
-    0xea,
-    0x00,
-    0x00,
-    0xaa,
-    0x00,
-    0x00,
-    0xaa,
-    0x00,
-    0x0e,
-    0xaa,
-    0x00,
-    0x0a,
-    0xaa,
-    0x00,
-    0x0a,
-    0xaa,
-    0x00,
-    0xea,
-    0xaa,
-    0x00,
-    0xaa,
-    0xaa,
-    0x00,
-    0xaa,
-    0xaa,
-    0x0e,
-    0xaa,
-    0xaa,
-    0x0a,
-    0xaa,
-    0xaa,
-    0x0e,
-    0xee,
-    0xee,
-    0x00,
-    0x00,
-    0x00,
-};
-
-static const uint8_t batlow[] = {
-  24,17,
-  0x00, 0x00, 0x00, 
-  0x7f, 0xff, 0xf8, 
-  0x40, 0x00, 0x08, 
-  0x40, 0x00, 0x08, 
-  0x40, 0x00, 0x0e, 
-  0x40, 0x00, 0x0a, 
-  0x48, 0x00, 0x0a, 
-  0x48, 0x00, 0x0a, 
-  0x48, 0x64, 0x4a, 
-  0x48, 0x94, 0x4a, 
-  0x48, 0x95, 0x4a, 
-  0x4e, 0x62, 0x8a, 
-  0x40, 0x00, 0x0e, 
-  0x40, 0x00, 0x08, 
-  0x40, 0x00, 0x08, 
-  0x7f, 0xff, 0xf8, 
-  0x00, 0x00, 0x00, 
-};
-
-
-static const uint8_t tbird2[] = {
-
-0x40,0x01,178,0,
-  0xb6, 0xdb, 0x6d, 0xb5, 0xad, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0xa5, 0x54, 0xaa, 0xaa, 0xaa, 0x55, 0x4a, 
-  0xdb, 0x6d, 0xb6, 0xd6, 0xd6, 0xee, 0xee, 0xdb, 0x6d, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0xa4, 0x92, 0x49, 0x24, 0x92, 0x22, 0x4a, 0x54, 0x8a, 0x92, 0x44, 0x91, 0x48, 0xa9, 
-  0x6d, 0xaa, 0xaa, 0xaa, 0xb5, 0x55, 0x55, 0x6a, 0xaa, 0xb5, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x49, 0x49, 0x24, 0x92, 0x44, 0x52, 0x95, 0x55, 0x2a, 0x92, 0x49, 0x55, 0x29, 0x22, 0x52, 0x49, 0x2a, 0x4a, 0xa5, 0x14, 
-  0xaa, 0xb6, 0xd5, 0x6d, 0x55, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xad, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x29, 0x24, 0xaa, 0xaa, 0xaa, 0xa9, 0x33, 0x2a, 0x52, 0x49, 0x52, 0x55, 0x55, 0x24, 0x94, 0x95, 0x49, 0x2a, 0xa5, 0x29, 0x14, 0xa2, 
-  0xb6, 0xdb, 0x5b, 0xb6, 0xda, 0xb6, 0xd5, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0x92, 0xa5, 0x55, 0x52, 0x95, 0x25, 0x52, 0x4a, 0x88, 0x95, 0x49, 0x24, 0x89, 0x49, 0x22, 0x92, 0x42, 0xa9, 0x2a, 0xa4, 0x50, 0xa4, 0xa2, 0x95, 
-  0xdb, 0x55, 0x6d, 0x55, 0x55, 0x55, 0x5b, 0x56, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x55, 0x4a, 0x95, 0x52, 0x94, 0x8a, 0xa9, 0x6a, 0xa2, 0x55, 0x52, 0x54, 0xa4, 0x94, 0x49, 0x5a, 0x44, 0x91, 0x12, 0x8a, 0x92, 0x54, 0x48, 
-  0x55, 0x6a, 0xaa, 0xaa, 0xab, 0x55, 0x55, 0x5a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xaa, 0x4a, 0x52, 0x54, 0xa9, 0x55, 0x54, 0x94, 0x95, 0x55, 0x24, 0x95, 0x4a, 0x12, 0x4a, 0xa5, 0x21, 0x2a, 0x4a, 0x49, 0x24, 0x49, 0x0a, 0xa5, 
-  0xb5, 0xad, 0xaa, 0xd5, 0xb5, 0x6a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa9, 0x55, 0x55, 0x52, 0xa9, 0x4a, 0xa5, 0x14, 0xa4, 0xa5, 0x4a, 0x44, 0x24, 0x92, 0x49, 0x21, 0x4a, 0xa1, 0x14, 0x94, 0x91, 0x24, 0xa4, 0x92, 0xa4, 0xa1, 0x12, 
-  0xd6, 0xb5, 0x5b, 0x5a, 0xaa, 0xab, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xaa, 0x49, 0x2a, 0x55, 0x29, 0x2a, 0xa5, 0x2a, 0x52, 0x52, 0xaa, 0x92, 0x49, 0x24, 0x95, 0x28, 0x54, 0xa2, 0x4a, 0x4a, 0x92, 0x2a, 0x54, 0x12, 0x54, 0xa8, 
-  0x5a, 0xaa, 0xd5, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0xa9, 0x2a, 0x49, 0x55, 0x49, 0x4a, 0xaa, 0x91, 0x52, 0x92, 0x89, 0x29, 0x21, 0x49, 0x24, 0x92, 0x48, 0xa5, 0x0a, 0x55, 0x21, 0x24, 0x49, 0x41, 0x22, 0xc9, 0x0a, 0x05, 
-  0xab, 0x56, 0xaa, 0xaa, 0xab, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x2a, 0x4a, 0xa9, 0x55, 0x54, 0xaa, 0xa4, 0x92, 0x54, 0x8a, 0x49, 0x55, 0x44, 0x94, 0xa4, 0xaa, 0x49, 0x25, 0x12, 0xa1, 0x08, 0x94, 0x92, 0xa4, 0x94, 0x94, 0x24, 0xa1, 0x50, 
-  0xb5, 0x6a, 0xb5, 0x55, 0xb5, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0xaa, 0xaa, 0xa5, 0x4a, 0x4a, 0x92, 0x52, 0x55, 0x4a, 0x55, 0x54, 0x48, 0xaa, 0x4a, 0x15, 0x11, 0x24, 0x92, 0xa4, 0x54, 0xa5, 0x25, 0x49, 0x12, 0x4a, 0x42, 0x92, 0x54, 0x8a, 
-  0xaa, 0xab, 0x55, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa5, 0x52, 0x55, 0x29, 0x52, 0x55, 0x2a, 0xa4, 0xa5, 0x48, 0x93, 0x25, 0x11, 0x25, 0x50, 0xa4, 0x92, 0x48, 0x49, 0x0a, 0x50, 0x90, 0x24, 0xa9, 0x21, 0x29, 0x24, 0x82, 0x51, 
-  0xad, 0x55, 0x56, 0xad, 0x55, 0x55, 0x55, 0x55, 0x52, 0x55, 0x25, 0x2a, 0x4a, 0x94, 0xa5, 0x29, 0x49, 0x49, 0x12, 0x28, 0xa5, 0x48, 0x92, 0xa4, 0x90, 0x8a, 0x92, 0x49, 0x25, 0x24, 0xa1, 0x0a, 0x4a, 0x92, 0x04, 0x94, 0x84, 0x92, 0x29, 0x0a, 
-  0x6a, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x95, 0x49, 0x54, 0xa9, 0x55, 0x52, 0x94, 0xa5, 0x24, 0xa4, 0xd5, 0x45, 0x12, 0x25, 0x48, 0x4a, 0x4a, 0x52, 0x49, 0x24, 0x92, 0x92, 0x54, 0xa5, 0x22, 0x49, 0x52, 0x42, 0x52, 0x21, 0x44, 0x50, 
-  0xab, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x2a, 0x95, 0x28, 0x95, 0x52, 0x94, 0xaa, 0x15, 0x09, 0x2a, 0x49, 0x52, 0x25, 0x21, 0x25, 0x24, 0x94, 0x92, 0x48, 0x49, 0x05, 0x10, 0x89, 0x24, 0x24, 0x29, 0x08, 0x94, 0x29, 0x0a, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa9, 0x2a, 0xaa, 0xa5, 0x52, 0xa6, 0x52, 0x4a, 0x52, 0x49, 0x52, 0x64, 0x91, 0x24, 0x89, 0x52, 0x94, 0x90, 0x92, 0x42, 0x49, 0x25, 0x10, 0xa8, 0xa4, 0x52, 0x42, 0x91, 0x44, 0x52, 0x42, 0x84, 0xa1, 
-  0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa4, 0x92, 0x54, 0xa9, 0x51, 0x49, 0x29, 0x49, 0x25, 0x49, 0x12, 0x4a, 0x92, 0x54, 0x88, 0x4a, 0x4a, 0x49, 0x29, 0x24, 0x90, 0x8a, 0x04, 0x12, 0x08, 0x94, 0x44, 0x22, 0x89, 0x14, 0x52, 0x14, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x49, 0x24, 0xaa, 0x55, 0x4a, 0xa5, 0x15, 0x15, 0x2a, 0xa5, 0x25, 0x52, 0x24, 0xa9, 0x24, 0x49, 0x02, 0x55, 0x21, 0x25, 0x22, 0x04, 0x48, 0x45, 0x21, 0x52, 0x89, 0x44, 0x42, 0x22, 0x90, 0x44, 0x42, 0x08, 0xa2, 
-  0x5a, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xaa, 0x92, 0xa9, 0x29, 0x2a, 0xa4, 0xaa, 0xa4, 0x92, 0x94, 0x89, 0x52, 0x44, 0x92, 0xa4, 0xa9, 0x02, 0x94, 0x90, 0x89, 0x52, 0x22, 0x90, 0x94, 0x20, 0x50, 0x29, 0x11, 0x14, 0x4a, 0x21, 0x29, 0x52, 0x11, 
-  0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0xaa, 0xaa, 0x55, 0x25, 0x55, 0x48, 0xaa, 0x91, 0x2a, 0x48, 0x52, 0x54, 0x89, 0x2a, 0x48, 0x12, 0x4a, 0x54, 0x42, 0x4a, 0x24, 0x24, 0x88, 0x4a, 0x42, 0x8a, 0x85, 0x42, 0x48, 0x81, 0x01, 0x14, 0x04, 0x24, 0x88, 
-  0x55, 0x55, 0x55, 0x52, 0xaa, 0x52, 0x49, 0x54, 0xaa, 0x4a, 0x55, 0x22, 0x4a, 0x91, 0x2b, 0x25, 0x22, 0x54, 0x81, 0x25, 0x49, 0x21, 0x22, 0x29, 0x21, 0x11, 0x49, 0x25, 0x01, 0x10, 0x44, 0x20, 0x11, 0x12, 0x54, 0xaa, 0x42, 0xa1, 0x49, 0x25, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0xa5, 0x4a, 0xaa, 0xa2, 0x92, 0xa5, 0x24, 0x95, 0x28, 0x4a, 0x90, 0x90, 0x94, 0x82, 0x54, 0x92, 0x44, 0x94, 0x89, 0x44, 0x48, 0xa4, 0x22, 0x48, 0xa8, 0x4a, 0x21, 0x15, 0x48, 0x44, 0x82, 0x01, 0x28, 0x14, 0x20, 0x90, 
-  0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x4a, 0x55, 0x49, 0x28, 0x92, 0xa8, 0xa5, 0x51, 0x4a, 0x4a, 0x42, 0x54, 0x92, 0x49, 0x28, 0x42, 0x24, 0x22, 0x25, 0x12, 0x88, 0x22, 0x05, 0x01, 0x14, 0x80, 0x22, 0x21, 0x28, 0xa8, 0x02, 0x82, 0x8a, 0x05, 
-  0xaa, 0xaa, 0xa9, 0x24, 0x92, 0xaa, 0x52, 0x94, 0xaa, 0x95, 0x54, 0x95, 0x12, 0x24, 0x25, 0x25, 0x29, 0x12, 0x49, 0x24, 0x45, 0x11, 0x11, 0x14, 0x80, 0x40, 0x22, 0x88, 0xa8, 0xa8, 0x82, 0x55, 0x09, 0x14, 0x04, 0x05, 0x50, 0x50, 0x21, 0x50, 
-  0x55, 0x55, 0x4a, 0x95, 0x54, 0x95, 0x49, 0x4a, 0x49, 0x49, 0x25, 0x42, 0xa9, 0x4a, 0x90, 0x90, 0x88, 0xa4, 0x84, 0x89, 0x10, 0xa8, 0xa4, 0xa2, 0x55, 0x15, 0x48, 0x22, 0x02, 0x04, 0x50, 0x00, 0xa0, 0x81, 0x51, 0x50, 0x0a, 0x0a, 0x88, 0x0a, 
-  0xaa, 0xaa, 0x55, 0x54, 0xaa, 0xa2, 0x54, 0xa2, 0xa4, 0x54, 0x92, 0x28, 0x44, 0x91, 0x4a, 0x4a, 0x55, 0x12, 0x28, 0x44, 0xa5, 0x05, 0x09, 0x08, 0x02, 0x40, 0x12, 0x88, 0xa8, 0xa2, 0x0a, 0xaa, 0x0a, 0x54, 0x08, 0x0a, 0xa1, 0x40, 0x45, 0x50, 
-  0x55, 0x49, 0x52, 0x52, 0x92, 0x55, 0x25, 0x19, 0x15, 0x22, 0x49, 0x4a, 0x92, 0x4a, 0x25, 0x21, 0x00, 0x88, 0x92, 0x92, 0x10, 0x50, 0x44, 0x52, 0xa8, 0x95, 0x40, 0x22, 0x02, 0x11, 0x40, 0x00, 0xa0, 0x01, 0x45, 0x40, 0x14, 0x2a, 0x90, 0x0a, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0x49, 0x49, 0x52, 0xa4, 0xa2, 0x95, 0x24, 0xa4, 0x49, 0x24, 0x90, 0x94, 0xaa, 0x52, 0x44, 0x48, 0x8a, 0x85, 0x21, 0x04, 0x04, 0x20, 0x15, 0x48, 0xa8, 0x88, 0x2a, 0xaa, 0x0a, 0xa8, 0x20, 0x2a, 0x81, 0x10, 0x4a, 0xa1, 
-  0x52, 0x55, 0x25, 0x25, 0x55, 0x24, 0x89, 0x2a, 0x54, 0x48, 0x92, 0x12, 0xa4, 0x92, 0x4a, 0x42, 0x21, 0x09, 0x11, 0x12, 0x40, 0x20, 0x94, 0x51, 0x52, 0x8a, 0xa0, 0x02, 0x02, 0x25, 0x00, 0x00, 0xa0, 0x05, 0x15, 0x00, 0x54, 0xa5, 0x21, 0x14, 
-  0xaa, 0x92, 0x94, 0x92, 0x49, 0x55, 0x54, 0x81, 0x0a, 0xa5, 0x49, 0x48, 0x12, 0x49, 0x21, 0x14, 0x94, 0xa2, 0x48, 0x84, 0x2a, 0x94, 0x02, 0x08, 0x08, 0x20, 0x0a, 0xa9, 0x69, 0x00, 0xaa, 0xaa, 0x15, 0x50, 0x80, 0xaa, 0x02, 0x10, 0x8a, 0x42, 
-  0x4a, 0xa9, 0x52, 0xa9, 0x54, 0x92, 0x22, 0x5a, 0xa1, 0x10, 0x24, 0xa5, 0x49, 0x24, 0x94, 0xa2, 0x42, 0x11, 0x12, 0x51, 0x40, 0x42, 0xa9, 0x45, 0x42, 0x8a, 0xd5, 0x77, 0xbe, 0xf4, 0x00, 0x01, 0x40, 0x04, 0x55, 0x01, 0x54, 0x8a, 0x21, 0x29, 
-  0x54, 0xa5, 0x2a, 0x4a, 0x8a, 0x49, 0x55, 0x24, 0x54, 0xaa, 0x92, 0x11, 0x24, 0x90, 0x42, 0x11, 0x14, 0xa4, 0x44, 0x08, 0x2a, 0x10, 0x04, 0x20, 0x28, 0x23, 0x5b, 0xad, 0x55, 0xaf, 0xb5, 0x54, 0x15, 0x52, 0x80, 0xaa, 0x22, 0x41, 0x4a, 0x44, 
-  0xa5, 0x2a, 0xa5, 0x29, 0x51, 0x24, 0x88, 0x92, 0x8a, 0x04, 0xa9, 0x4a, 0x49, 0x0a, 0x94, 0x8a, 0x42, 0x12, 0x22, 0xa2, 0x81, 0x4a, 0xa1, 0x15, 0x45, 0x16, 0xa4, 0x56, 0xea, 0xd5, 0x6a, 0x81, 0x40, 0x08, 0x54, 0x01, 0x11, 0x2a, 0x21, 0x12, 
-  0x54, 0xa4, 0x92, 0xa4, 0x4a, 0x92, 0x52, 0x48, 0x51, 0x52, 0x04, 0x21, 0x24, 0x50, 0x42, 0x51, 0x28, 0x89, 0x10, 0x11, 0x2a, 0x20, 0x14, 0x80, 0x10, 0xab, 0x12, 0xaa, 0xb7, 0x76, 0xdd, 0x7d, 0x15, 0x52, 0x09, 0x54, 0x88, 0x84, 0x94, 0x48, 
-  0x4a, 0x95, 0x54, 0x92, 0xa4, 0x49, 0x25, 0x25, 0x0a, 0x29, 0x52, 0x94, 0x89, 0x0a, 0x94, 0x84, 0x04, 0x50, 0xa5, 0x4a, 0x40, 0x8a, 0xa2, 0x55, 0x4a, 0x1d, 0xa9, 0x12, 0xaa, 0x9b, 0x6b, 0xab, 0xe8, 0x81, 0x42, 0x08, 0x44, 0x22, 0x02, 0x22, 
-  0x52, 0x52, 0x25, 0x4a, 0x12, 0xa4, 0x90, 0x92, 0xa1, 0x44, 0x48, 0x42, 0x24, 0xa0, 0x42, 0x29, 0x52, 0x84, 0x10, 0x81, 0x15, 0x20, 0x48, 0x08, 0x91, 0x56, 0x94, 0xa9, 0x40, 0x55, 0xb6, 0xf6, 0xb7, 0x6c, 0x28, 0xa2, 0x92, 0x90, 0xa9, 0x08, 
-  0x4a, 0xa9, 0x52, 0x29, 0x49, 0x12, 0x4a, 0x48, 0x54, 0x22, 0x92, 0x94, 0x91, 0x15, 0x28, 0x84, 0x24, 0x52, 0xa5, 0x2a, 0x40, 0x95, 0x25, 0x52, 0x48, 0x3b, 0x22, 0x94, 0xd5, 0x22, 0x5b, 0x5b, 0x5b, 0xb7, 0x82, 0x08, 0x20, 0x0a, 0x00, 0x41, 
-  0x54, 0x95, 0x29, 0x44, 0xa4, 0xa9, 0x25, 0x25, 0x05, 0x54, 0x49, 0x22, 0x44, 0x42, 0x05, 0x29, 0x49, 0x08, 0x88, 0x88, 0x95, 0x04, 0x91, 0x29, 0x25, 0x56, 0x95, 0x22, 0x48, 0x88, 0xa8, 0xaa, 0xed, 0x5a, 0xfd, 0x42, 0x8a, 0xa0, 0xaa, 0x10, 
-  0x4a, 0x48, 0x84, 0xaa, 0x2a, 0x04, 0x90, 0x90, 0xa8, 0x82, 0x24, 0x49, 0x12, 0x94, 0xa8, 0x84, 0x22, 0x45, 0x24, 0x52, 0x44, 0xa9, 0x24, 0x84, 0x91, 0x7a, 0xc8, 0x94, 0xc5, 0x45, 0x31, 0x15, 0x57, 0xed, 0x56, 0xf8, 0x00, 0x08, 0x00, 0x84, 
-  0x51, 0x55, 0x55, 0x11, 0x41, 0x52, 0x4a, 0x4a, 0x22, 0x29, 0x42, 0x24, 0x48, 0x42, 0x44, 0x52, 0x94, 0xa8, 0x92, 0x89, 0x11, 0x12, 0x4a, 0x52, 0x4a, 0xaf, 0x7e, 0xa8, 0xa8, 0x28, 0x94, 0x40, 0xaa, 0x57, 0xbb, 0x57, 0xea, 0x42, 0x88, 0x10, 
-  0x4a, 0x89, 0x28, 0xa4, 0x94, 0xa9, 0x21, 0x21, 0x49, 0x44, 0x29, 0x49, 0x22, 0x29, 0x12, 0x88, 0x42, 0x04, 0x48, 0x44, 0x4a, 0x49, 0x21, 0x09, 0x21, 0x75, 0xdf, 0xd6, 0xc2, 0xa5, 0x62, 0x95, 0x05, 0x5a, 0xd5, 0xdd, 0x7d, 0xa0, 0x22, 0x42, 
-  0x54, 0x54, 0x92, 0x4a, 0x4a, 0x04, 0x94, 0x94, 0x94, 0x29, 0x44, 0x24, 0x95, 0x44, 0x48, 0x52, 0x94, 0xaa, 0x92, 0xa9, 0x21, 0x24, 0x94, 0xa4, 0x95, 0xae, 0xeb, 0xe1, 0x39, 0x01, 0x30, 0x20, 0x56, 0x25, 0x5e, 0xb7, 0xae, 0xfd, 0x00, 0x00, 
-  0x4a, 0xa2, 0x4a, 0x91, 0x21, 0x52, 0x4a, 0x42, 0x42, 0x84, 0x29, 0x42, 0x20, 0x29, 0x25, 0x24, 0x49, 0x10, 0x49, 0x04, 0x94, 0x91, 0x22, 0x12, 0x21, 0x77, 0x7d, 0xf4, 0x45, 0xda, 0x25, 0x0a, 0x02, 0x84, 0x22, 0xda, 0xf7, 0xb6, 0x92, 0x48, 
-  0x22, 0x55, 0x51, 0x24, 0x94, 0x94, 0x91, 0x29, 0x28, 0x52, 0x84, 0x28, 0x95, 0x44, 0x92, 0x92, 0xa4, 0xa5, 0x24, 0xa9, 0x22, 0x44, 0x89, 0x48, 0x95, 0xad, 0xab, 0x61, 0x00, 0x2a, 0xb0, 0x41, 0x56, 0x52, 0x94, 0x7f, 0xba, 0xff, 0xc0, 0x02, 
-  0xa9, 0x08, 0x8a, 0x52, 0x4a, 0x42, 0x48, 0x8a, 0x45, 0x24, 0x52, 0x85, 0x42, 0x2a, 0x48, 0x49, 0x12, 0x12, 0x92, 0x12, 0x49, 0x12, 0x52, 0x25, 0x22, 0xdb, 0xfe, 0xb4, 0xaa, 0x01, 0x57, 0x28, 0x05, 0x09, 0x49, 0x59, 0x5f, 0xdb, 0x49, 0x20, 
-  0x4a, 0xa5, 0x51, 0x09, 0x21, 0x29, 0x25, 0x21, 0x28, 0x92, 0x88, 0xa8, 0x29, 0x41, 0x25, 0x24, 0xa4, 0xa8, 0x48, 0xa4, 0x94, 0xa9, 0x09, 0x50, 0x95, 0x76, 0xab, 0xf2, 0x11, 0x54, 0x08, 0xa4, 0x94, 0xa4, 0x22, 0xff, 0xaa, 0xaa, 0xc0, 0x08, 
-  0x24, 0x52, 0x2a, 0xa4, 0x94, 0x94, 0x92, 0x54, 0x85, 0x49, 0x25, 0x15, 0x4a, 0x2a, 0x92, 0x92, 0x49, 0x05, 0x25, 0x12, 0x42, 0x04, 0xa4, 0x0a, 0x47, 0xbd, 0xfe, 0xa9, 0x4a, 0x02, 0xa2, 0x56, 0xa6, 0x09, 0x55, 0xdb, 0xbf, 0xff, 0xc4, 0x82, 
-  0x92, 0x89, 0x44, 0x52, 0x4a, 0x42, 0x49, 0x0a, 0x52, 0x24, 0x92, 0x42, 0x25, 0x48, 0x48, 0xa9, 0x24, 0xa9, 0x48, 0xa4, 0x94, 0xa9, 0x12, 0xa5, 0x29, 0x6b, 0xb7, 0xf2, 0x21, 0x54, 0x15, 0x08, 0xaa, 0xa2, 0x09, 0xff, 0xed, 0xb6, 0x90, 0x20, 
-  0x49, 0x54, 0xa9, 0x15, 0x21, 0x29, 0x24, 0xa1, 0x29, 0x52, 0x49, 0x29, 0x50, 0xa5, 0x2a, 0x44, 0x92, 0x54, 0x25, 0x12, 0x49, 0x24, 0xa9, 0x28, 0x87, 0xbe, 0xfe, 0xb4, 0x94, 0x49, 0x40, 0xa2, 0x04, 0xac, 0xa7, 0x6d, 0x36, 0xdb, 0x42, 0x08, 
-  0x54, 0x92, 0x25, 0x48, 0x95, 0x55, 0x52, 0x95, 0x44, 0x89, 0x2a, 0x94, 0x8a, 0x12, 0xa5, 0x2a, 0x49, 0x22, 0x92, 0x49, 0x24, 0x92, 0x44, 0x85, 0x2a, 0xd7, 0x5b, 0xe9, 0x42, 0xa4, 0x95, 0x14, 0xa0, 0x12, 0xab, 0xff, 0xab, 0xff, 0xc8, 0xa2, 
-  0x25, 0x4a, 0x92, 0x55, 0x54, 0x92, 0x4a, 0x54, 0x95, 0x24, 0x90, 0x49, 0x21, 0x49, 0x10, 0x91, 0x54, 0x95, 0x49, 0x54, 0x92, 0x49, 0x29, 0x52, 0x4d, 0x7b, 0xff, 0x72, 0x29, 0x10, 0x24, 0x41, 0x12, 0x40, 0xae, 0xea, 0xfe, 0xa4, 0x22, 0x08, 
-  0x92, 0x24, 0xa9, 0x22, 0x4a, 0x49, 0x29, 0x22, 0x52, 0x92, 0x4a, 0xa0, 0x48, 0x2a, 0xaa, 0x4a, 0x4a, 0x48, 0x54, 0x8a, 0x49, 0x24, 0x92, 0x29, 0x2b, 0xad, 0x6b, 0xd9, 0x44, 0x82, 0x12, 0xaa, 0x44, 0x8a, 0x17, 0xff, 0xf8, 0x09, 0x11, 0x52, 
-  0x55, 0x52, 0x95, 0x55, 0x25, 0x55, 0x4a, 0x95, 0x28, 0x49, 0x20, 0x14, 0x22, 0x91, 0x01, 0x25, 0x22, 0xa5, 0x22, 0x51, 0x2a, 0x92, 0x49, 0x44, 0x96, 0xf7, 0xfe, 0xf4, 0x12, 0x20, 0x8a, 0x11, 0x21, 0x20, 0x9d, 0xbd, 0xb2, 0xa2, 0x4a, 0x08, 
-  0x49, 0x2a, 0x52, 0x94, 0xa9, 0x24, 0xa4, 0x52, 0x85, 0x2a, 0x92, 0x81, 0x08, 0x4a, 0x54, 0x11, 0x54, 0x95, 0x55, 0x4a, 0xa4, 0x55, 0x54, 0x92, 0x5b, 0x5d, 0x5b, 0xb2, 0x88, 0x84, 0x52, 0xaa, 0x14, 0x95, 0x6f, 0xf7, 0xe9, 0x11, 0x24, 0xa5, 
-  0x54, 0xa9, 0x4a, 0x4a, 0x94, 0x92, 0x52, 0x94, 0x50, 0x90, 0x44, 0x52, 0x42, 0x20, 0x91, 0x4a, 0x4a, 0x52, 0x95, 0x55, 0x52, 0xa4, 0x8a, 0x55, 0x55, 0xf7, 0xff, 0xf9, 0x20, 0x10, 0x09, 0x00, 0x40, 0x48, 0xbf, 0xff, 0xe4, 0xaa, 0x52, 0xa8, 
-  0x4a, 0x95, 0x55, 0x52, 0x52, 0xaa, 0x89, 0x4a, 0xaa, 0x4a, 0x11, 0x00, 0x28, 0x8a, 0x24, 0x01, 0x2a, 0xad, 0x6a, 0xb5, 0x5d, 0x55, 0x61, 0x24, 0xae, 0xae, 0xd6, 0xd4, 0x8a, 0x82, 0xa4, 0xa9, 0x25, 0x25, 0x7b, 0xbf, 0x92, 0x41, 0x08, 0x92, 
-  0x55, 0x4a, 0x49, 0x29, 0x4a, 0x49, 0x54, 0xa1, 0x01, 0x21, 0x44, 0x4a, 0x02, 0x20, 0x89, 0x5a, 0xaa, 0xd5, 0x56, 0xdb, 0x6b, 0x6d, 0xbd, 0x52, 0x37, 0xfb, 0xff, 0xb8, 0x50, 0x54, 0x12, 0x02, 0x48, 0x92, 0xef, 0xfd, 0xa9, 0x14, 0xa5, 0x4a, 
-  0xa9, 0x29, 0x54, 0x95, 0x29, 0x24, 0x4a, 0x2a, 0xaa, 0x88, 0x10, 0x10, 0xa8, 0x8a, 0x25, 0x55, 0x55, 0x55, 0xb5, 0x55, 0xaa, 0xb6, 0xab, 0xaa, 0xad, 0x5e, 0xb5, 0xf2, 0x8a, 0x21, 0x49, 0x48, 0x82, 0x4b, 0xff, 0xf7, 0x45, 0x55, 0x52, 0x25, 
-  0x4a, 0xa5, 0x25, 0x48, 0xa5, 0x55, 0x22, 0x90, 0x40, 0x45, 0x42, 0x80, 0x00, 0x21, 0x5a, 0xaa, 0xda, 0xad, 0x5b, 0x6d, 0x6d, 0xaa, 0xd5, 0x6d, 0xb7, 0xeb, 0xff, 0x78, 0x51, 0x14, 0x24, 0x80, 0x29, 0x2e, 0xfd, 0xbe, 0xb4, 0xa4, 0x8a, 0x92, 
-  0x54, 0x94, 0xaa, 0x55, 0x52, 0x49, 0x54, 0xa5, 0x15, 0x10, 0x08, 0x25, 0x4a, 0x84, 0x2a, 0xab, 0x55, 0xb5, 0xad, 0xb5, 0xb6, 0xdb, 0x5d, 0xb6, 0xda, 0xbf, 0x5b, 0xd5, 0x2a, 0xc9, 0x2a, 0x21, 0x04, 0xab, 0xdf, 0xfe, 0x4a, 0x52, 0x54, 0x54, 
-  0x4a, 0x55, 0x49, 0x4a, 0x29, 0x24, 0x8a, 0x12, 0x82, 0x41, 0x21, 0x00, 0x2a, 0xb2, 0x02, 0xaa, 0xaa, 0xd6, 0xb5, 0x56, 0xab, 0x6d, 0x6a, 0xdb, 0x6d, 0xab, 0xfe, 0xf9, 0x55, 0x24, 0xa0, 0x84, 0x12, 0xbf, 0xff, 0xf9, 0x52, 0x89, 0x21, 0x0a, 
-  0x52, 0xaa, 0x55, 0x25, 0x45, 0x52, 0x51, 0x48, 0x50, 0x04, 0x00, 0x2b, 0xaa, 0xda, 0x90, 0xad, 0x56, 0xaa, 0xd6, 0xdb, 0x6d, 0x56, 0xaf, 0x6d, 0xb6, 0xf6, 0xb7, 0xda, 0xa4, 0xaa, 0x94, 0x10, 0x0a, 0xb7, 0x76, 0xed, 0x49, 0x44, 0x54, 0x51, 
-  0xaa, 0x91, 0x49, 0x52, 0xa8, 0x89, 0x24, 0x92, 0x8a, 0x90, 0x4a, 0x94, 0xaa, 0xaa, 0xc2, 0x2a, 0xb5, 0x5b, 0x5a, 0xad, 0xb6, 0xdb, 0xb5, 0xb6, 0xdb, 0x5b, 0xdd, 0xf9, 0x2a, 0x91, 0x40, 0x00, 0x81, 0x7f, 0xff, 0xf5, 0x2a, 0x52, 0x88, 0x0d, 
-  0x49, 0x55, 0x25, 0x29, 0x25, 0x24, 0x92, 0x44, 0x50, 0x01, 0x05, 0x6a, 0xaa, 0xab, 0x50, 0x15, 0xab, 0x6d, 0x6b, 0x75, 0x55, 0x6c, 0xda, 0xdb, 0x55, 0xad, 0x6a, 0xb5, 0x55, 0x4a, 0x21, 0x48, 0x25, 0xdb, 0xdf, 0xea, 0xaa, 0xa9, 0x25, 0x52, 
-  0x55, 0x4a, 0xaa, 0xaa, 0x94, 0xaa, 0x49, 0x22, 0x89, 0x48, 0x55, 0x2a, 0xad, 0x54, 0xac, 0x45, 0x5d, 0xb5, 0xad, 0xab, 0x6f, 0xb7, 0x6d, 0x55, 0xba, 0xf6, 0xb7, 0x5a, 0xa4, 0xa4, 0x88, 0x12, 0x0b, 0x7f, 0x57, 0xa5, 0x55, 0x54, 0xa8, 0x09, 
-  0x55, 0x2a, 0xa9, 0x4a, 0x55, 0x41, 0x12, 0x14, 0x54, 0x05, 0xb5, 0x55, 0x56, 0xd6, 0xaa, 0x02, 0xd5, 0x56, 0xb5, 0x5d, 0xb4, 0xda, 0xb6, 0xee, 0xd7, 0x5b, 0xdd, 0xed, 0x55, 0x52, 0xd7, 0xc0, 0xad, 0xff, 0x6e, 0xca, 0xa4, 0x4a, 0xa5, 0x44, 
-  0xa4, 0xa9, 0x55, 0x29, 0x52, 0x54, 0x88, 0xa2, 0x82, 0xb5, 0x4a, 0xaa, 0xda, 0xaa, 0xab, 0x09, 0x55, 0x6a, 0xd6, 0xea, 0xd7, 0x6d, 0xd5, 0x5b, 0x6d, 0xad, 0x6b, 0x55, 0x4a, 0xaf, 0x7e, 0xa8, 0x2f, 0xdd, 0xdf, 0x95, 0x29, 0x2a, 0xaa, 0x23, 
-  0x55, 0x55, 0x2a, 0xa5, 0x55, 0x4a, 0x52, 0x94, 0x54, 0x95, 0x55, 0x55, 0x55, 0x55, 0x5a, 0xc0, 0xb6, 0xad, 0x5b, 0x56, 0xb5, 0x56, 0xbb, 0xb5, 0xb6, 0xf6, 0xbd, 0xfb, 0xb6, 0xfa, 0xef, 0xf1, 0x5b, 0x7f, 0x7e, 0x09, 0x40, 0x05, 0x51, 0x14, 
-  0x55, 0x55, 0x52, 0x55, 0x4a, 0xa9, 0x4a, 0x49, 0x2a, 0xaa, 0xaa, 0xd6, 0xaa, 0xaa, 0xab, 0x40, 0x55, 0xb6, 0xea, 0xeb, 0x5b, 0x75, 0xad, 0x5a, 0xdb, 0x5b, 0xd6, 0xad, 0x6f, 0xaf, 0xbb, 0xdc, 0x6f, 0xfb, 0xba, 0xa4, 0x12, 0xa8, 0xac, 0xaa, 
-  0x4a, 0xaa, 0xaa, 0xaa, 0xaa, 0x55, 0x29, 0x24, 0x91, 0x55, 0x5a, 0xaa, 0xaa, 0xdb, 0x55, 0x71, 0x2a, 0xd5, 0x5b, 0x5d, 0xed, 0xae, 0xd6, 0xef, 0x6d, 0xee, 0xbb, 0xdb, 0xbb, 0xfd, 0xfe, 0xf5, 0xbd, 0xee, 0xfc, 0x0a, 0x40, 0x05, 0x52, 0x92, 
-  0x55, 0x49, 0x55, 0x55, 0x55, 0x4a, 0xa5, 0x52, 0x40, 0x15, 0x55, 0x55, 0x56, 0xaa, 0xb5, 0x50, 0x16, 0xab, 0x6d, 0xb6, 0xaa, 0xd5, 0x75, 0x55, 0xb6, 0xbb, 0xd6, 0xbe, 0xdf, 0xef, 0xb7, 0xfa, 0xf7, 0xbe, 0xe8, 0xa0, 0x08, 0xa5, 0x55, 0x55, 
-  0x55, 0x2a, 0x95, 0x52, 0xaa, 0xa9, 0x55, 0x4a, 0x80, 0x12, 0xaa, 0xaa, 0xda, 0xaa, 0xd6, 0xac, 0x0a, 0xb5, 0xaa, 0xdb, 0x77, 0x6d, 0xae, 0xed, 0x5b, 0x56, 0xfb, 0x6b, 0x6a, 0xfe, 0xff, 0x6f, 0xdf, 0xfb, 0x78, 0x15, 0x02, 0x15, 0x55, 0x55, 
-  0x4a, 0xaa, 0xaa, 0xaa, 0x55, 0x55, 0x54, 0xa9, 0x10, 0x2a, 0xaa, 0xb6, 0xaa, 0xdb, 0x5a, 0xd4, 0x0d, 0xae, 0xb6, 0xb6, 0xad, 0x56, 0xd5, 0xb7, 0xed, 0xff, 0x56, 0xf7, 0xb7, 0xbb, 0xdd, 0xf5, 0x7e, 0xea, 0xf2, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 
-  0x54, 0xaa, 0xa9, 0x55, 0x52, 0xaa, 0x92, 0x00, 0x01, 0x55, 0x55, 0x55, 0x55, 0x55, 0x6a, 0xb5, 0x05, 0x55, 0x5b, 0x5b, 0xd5, 0xbb, 0x7a, 0xda, 0xb6, 0xaa, 0xed, 0xad, 0x76, 0xef, 0xf7, 0xdf, 0xf7, 0xff, 0xe0, 0x48, 0x00, 0x52, 0x4a, 0xa9, 
-  0x52, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa9, 0x40, 0x25, 0x55, 0x55, 0x55, 0xad, 0xad, 0x56, 0xd6, 0x02, 0xeb, 0xad, 0xed, 0x7b, 0x6a, 0xaf, 0x6b, 0x5b, 0x6f, 0xbb, 0xbb, 0xdb, 0xfe, 0xff, 0x6b, 0xbf, 0xff, 0xca, 0x23, 0xfd, 0x0a, 0xaa, 0x44, 
-  0xad, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0x80, 0x15, 0x25, 0x55, 0x55, 0x55, 0x6b, 0xaa, 0xaa, 0x83, 0x5c, 0xea, 0xae, 0xad, 0xad, 0xd5, 0xb5, 0xed, 0xb5, 0x6e, 0xee, 0xfd, 0xb7, 0xdf, 0xbe, 0xfd, 0xb7, 0x95, 0xbf, 0x76, 0xaa, 0xa9, 0x22, 
-  0x52, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x55, 0x58, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xac, 0xb5, 0x55, 0x40, 0xab, 0x5b, 0x55, 0xd6, 0xda, 0xba, 0xde, 0xb6, 0xde, 0xf5, 0xb7, 0x56, 0xff, 0x7d, 0x6f, 0xef, 0xff, 0x56, 0xff, 0xff, 0x92, 0xa9, 0x14, 
-  0xad, 0x55, 0x55, 0x52, 0xaa, 0xa9, 0x24, 0xa6, 0x52, 0x54, 0x95, 0x55, 0x5b, 0x55, 0x2b, 0x6d, 0x81, 0x6d, 0x6d, 0xb6, 0xbb, 0x6d, 0xd7, 0x6a, 0xdb, 0x6b, 0xae, 0xda, 0xfe, 0xed, 0xfa, 0xfb, 0x7f, 0xff, 0xff, 0xff, 0xfe, 0xd5, 0x44, 0xa2, 
-  0x55, 0x55, 0x55, 0x49, 0x55, 0x55, 0x52, 0x52, 0x95, 0x4a, 0xaa, 0xaa, 0xaa, 0xaa, 0xd5, 0x56, 0xa0, 0xb5, 0xaa, 0xdb, 0x6d, 0xb6, 0xba, 0xb7, 0x6d, 0xbd, 0x7b, 0xef, 0xad, 0x7f, 0xbb, 0xaf, 0xfd, 0xda, 0xff, 0xfd, 0xdb, 0xea, 0x28, 0x14, 
-  0xaa, 0xaa, 0xaa, 0x84, 0xaa, 0xa4, 0x95, 0x4a, 0x52, 0xa9, 0x52, 0xaa, 0xaa, 0xb6, 0xad, 0x55, 0x44, 0xaa, 0xb7, 0x6a, 0xd5, 0x5a, 0xd7, 0xda, 0xb6, 0xeb, 0xd6, 0xba, 0xff, 0xb6, 0xed, 0xfd, 0xdf, 0xff, 0xff, 0xdf, 0xff, 0xb1, 0x12, 0x8a, 
-  0x55, 0x55, 0x55, 0x2a, 0xaa, 0x92, 0x52, 0xa9, 0x4a, 0x55, 0x2a, 0x55, 0x55, 0x55, 0x6a, 0xaa, 0xb0, 0x5b, 0x5a, 0xad, 0x6e, 0xed, 0x6d, 0x6f, 0xdb, 0xbe, 0xbf, 0xdf, 0xb5, 0xff, 0xd7, 0x6f, 0xff, 0x7f, 0xef, 0xfb, 0x7e, 0xd4, 0xa0, 0x42, 
-  0xaa, 0xaa, 0xaa, 0xa9, 0x55, 0x55, 0x49, 0x15, 0x29, 0x49, 0x55, 0x55, 0x55, 0x55, 0xaa, 0xd5, 0xa0, 0x55, 0xd5, 0xb7, 0xb5, 0x57, 0xb6, 0xb5, 0x6e, 0xd7, 0xea, 0xf5, 0xde, 0xab, 0x5d, 0xfe, 0xf7, 0xff, 0xfb, 0xef, 0xf7, 0xf2, 0x09, 0x14, 
-  0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x24, 0xa4, 0xa4, 0xa5, 0x25, 0x25, 0x4a, 0xaa, 0xaa, 0xad, 0x5a, 0xb2, 0x2d, 0x6e, 0xd9, 0x5b, 0xba, 0xdb, 0xde, 0xfb, 0xfa, 0xbf, 0x5e, 0xb5, 0xfe, 0xb7, 0xb7, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x80, 0x42, 
-  0x55, 0x55, 0x55, 0x55, 0x51, 0x52, 0x55, 0x52, 0x54, 0xa9, 0x54, 0xa9, 0x55, 0x55, 0x55, 0x55, 0x58, 0x16, 0xb5, 0x6d, 0xed, 0x6d, 0x6d, 0x75, 0xad, 0x5f, 0xeb, 0xab, 0x6e, 0xda, 0xfd, 0xff, 0x7e, 0xff, 0xfb, 0xff, 0x7f, 0xda, 0x24, 0x11, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x95, 0x24, 0x89, 0x2a, 0x94, 0x95, 0x55, 0x2a, 0xaa, 0xaa, 0xab, 0x68, 0x5a, 0xd6, 0xaa, 0xab, 0xab, 0xbb, 0xaf, 0x77, 0xea, 0xbd, 0x75, 0xb5, 0xb6, 0xaf, 0x7b, 0xff, 0xd6, 0xff, 0xf7, 0xf6, 0xf8, 0x00, 0x8a, 
-  0xa9, 0x55, 0x55, 0x55, 0x4a, 0x49, 0x52, 0x54, 0x92, 0x4a, 0x52, 0xaa, 0xaa, 0xaa, 0xaa, 0xd5, 0x54, 0x0b, 0x5b, 0x6e, 0xdd, 0x7d, 0xae, 0xf5, 0xdd, 0x5d, 0xd7, 0xad, 0x5b, 0x6f, 0xf5, 0xde, 0xd5, 0x7d, 0xb5, 0xff, 0xff, 0xe9, 0x10, 0x20, 
-  0x64, 0xaa, 0x95, 0x55, 0x29, 0x55, 0x09, 0x02, 0x55, 0x52, 0xaa, 0x49, 0x55, 0x55, 0x55, 0x40, 0xaa, 0x15, 0xad, 0xb5, 0x6a, 0xa6, 0xdb, 0x5e, 0xb7, 0xb6, 0xba, 0xf6, 0xed, 0xba, 0xbf, 0x6b, 0xff, 0xdf, 0xff, 0xff, 0x7f, 0xfc, 0x42, 0x05, 
-  0xaa, 0xaa, 0x49, 0x2a, 0xab, 0xe8, 0xea, 0xab, 0x69, 0x29, 0x15, 0x55, 0x25, 0x5a, 0xaa, 0x80, 0x2a, 0x0a, 0xd5, 0x56, 0xb7, 0xdb, 0x5d, 0xeb, 0x6a, 0xdb, 0xd6, 0xab, 0x5a, 0xdf, 0xeb, 0xff, 0x5d, 0xf5, 0xae, 0xff, 0xff, 0xe8, 0x00, 0x40, 
-  0x55, 0x55, 0x55, 0x54, 0xad, 0x5b, 0x7e, 0xcd, 0xd5, 0x44, 0xa2, 0xaa, 0xaa, 0xab, 0x55, 0x40, 0x2c, 0x46, 0xbb, 0x6b, 0x5a, 0xbd, 0xd6, 0xb5, 0xbd, 0x6d, 0x6b, 0x75, 0x6f, 0x6a, 0xbe, 0xdb, 0xf7, 0x5f, 0xff, 0xff, 0xff, 0x7a, 0x08, 0x15, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0x57, 0xb5, 0xdb, 0x56, 0xb4, 0xaa, 0x95, 0x24, 0xa9, 0x55, 0x55, 0x02, 0x15, 0x05, 0x55, 0xb5, 0x6d, 0xd6, 0xb5, 0x5e, 0xd7, 0xb6, 0xbd, 0xae, 0xaa, 0xdd, 0xf7, 0xfe, 0xdf, 0xfd, 0xfe, 0xfb, 0xef, 0xf8, 0x80, 0x80, 
-  0x55, 0x55, 0x55, 0x52, 0x95, 0xe5, 0xfe, 0xcb, 0x6a, 0x44, 0x52, 0xaa, 0x95, 0x55, 0x56, 0xc2, 0x16, 0x83, 0xdd, 0x5e, 0xb6, 0xaa, 0xd6, 0xeb, 0x6a, 0xdb, 0xaa, 0xd5, 0xb7, 0x77, 0x7f, 0x6f, 0xfb, 0x6f, 0xbf, 0xff, 0xff, 0xe8, 0x22, 0x04, 
-  0xaa, 0xaa, 0xdb, 0x54, 0xa8, 0x57, 0xb7, 0x55, 0xa9, 0x2a, 0x94, 0xaa, 0x55, 0x55, 0x54, 0x54, 0x15, 0x0a, 0x6b, 0xab, 0x55, 0x55, 0x5b, 0x5d, 0xbb, 0x6d, 0x6d, 0x6d, 0x5a, 0xdd, 0xdb, 0xfd, 0xbf, 0xfd, 0xff, 0xff, 0xff, 0xfa, 0x08, 0x11, 
-  0x6d, 0xb6, 0xad, 0xa5, 0x56, 0x8a, 0xad, 0x54, 0xa5, 0x51, 0x4a, 0x92, 0xaa, 0xaa, 0x80, 0x2a, 0x2a, 0x81, 0xad, 0x75, 0xaa, 0xb6, 0xad, 0xaa, 0xd5, 0xaa, 0xb7, 0xb6, 0xef, 0x77, 0xff, 0xbf, 0xed, 0xaf, 0xee, 0xff, 0xde, 0xf0, 0x80, 0x00, 
-  0xaa, 0xda, 0xd5, 0x52, 0x91, 0x54, 0x42, 0x92, 0x4a, 0x8a, 0x24, 0xaa, 0xa4, 0x00, 0x00, 0x28, 0x15, 0x41, 0x75, 0x95, 0x6d, 0xaa, 0xd5, 0x6e, 0xae, 0xb7, 0x59, 0x5b, 0x5a, 0xde, 0xb6, 0xf7, 0x7f, 0xff, 0xbf, 0xff, 0x7f, 0xd2, 0x22, 0x44, 
-  0xb6, 0xab, 0x6d, 0x09, 0x4a, 0x4a, 0xaa, 0x42, 0xa9, 0x55, 0x52, 0x49, 0x10, 0x00, 0x11, 0x14, 0x0b, 0x40, 0x95, 0x6a, 0xaa, 0xab, 0x5a, 0xb5, 0xb5, 0xaa, 0xee, 0xd5, 0xed, 0xf7, 0xff, 0xff, 0xf6, 0xf6, 0xff, 0xf7, 0xff, 0xe0, 0x88, 0x00, 
-  0xab, 0x6d, 0x56, 0xa4, 0x24, 0xa1, 0x29, 0x29, 0x14, 0xa1, 0x2a, 0xa0, 0x00, 0x22, 0x00, 0x18, 0x25, 0x40, 0xda, 0xad, 0x6a, 0xac, 0xab, 0x56, 0xda, 0xdd, 0x55, 0x6e, 0xbb, 0x7d, 0xdf, 0xfd, 0xdf, 0xdf, 0xf5, 0xff, 0xff, 0xca, 0x00, 0x24, 
-  0xba, 0xb6, 0xf8, 0x95, 0x52, 0x14, 0x84, 0x94, 0xa2, 0x14, 0x92, 0x00, 0x00, 0x80, 0x00, 0x50, 0x05, 0x40, 0x55, 0x55, 0xaa, 0xb5, 0x55, 0xb5, 0x6d, 0x6b, 0xb7, 0xb7, 0xdf, 0xdf, 0xfd, 0xdf, 0xff, 0xff, 0xdf, 0xff, 0xff, 0x20, 0x49, 0x00, 
-  0xd7, 0xdb, 0x55, 0x52, 0x09, 0x42, 0x22, 0x42, 0x15, 0x52, 0xa9, 0x00, 0x00, 0x01, 0x57, 0x51, 0x55, 0x62, 0x2d, 0xaa, 0xb5, 0x55, 0xb6, 0xab, 0xab, 0xad, 0x6d, 0x6d, 0x75, 0xf6, 0xf7, 0xff, 0xfb, 0xff, 0xfb, 0xff, 0xfa, 0x95, 0x00, 0x09, 
-  0x6d, 0x6d, 0x69, 0x29, 0x50, 0x10, 0x90, 0x29, 0x49, 0x2a, 0x4a, 0x22, 0x20, 0x2a, 0xa9, 0x55, 0x55, 0x50, 0x35, 0x55, 0x56, 0xaa, 0xaa, 0xdd, 0x75, 0x76, 0xb6, 0xde, 0xdf, 0x7f, 0xdf, 0xf6, 0xdf, 0xbf, 0xff, 0xff, 0xad, 0x40, 0x24, 0x80, 
-  0xb6, 0xb5, 0xaa, 0x84, 0x8a, 0x84, 0x05, 0x04, 0x54, 0x92, 0xa5, 0x00, 0x0a, 0xaa, 0xad, 0x6a, 0xaa, 0xa0, 0x15, 0x5a, 0xaa, 0xaa, 0xaa, 0xaa, 0xae, 0xab, 0xdb, 0xb7, 0xfb, 0xdb, 0xff, 0x7f, 0xfa, 0xff, 0xef, 0xf5, 0x6a, 0x95, 0x00, 0x22, 
-  0xdb, 0xda, 0xa4, 0x52, 0x20, 0x00, 0x40, 0xa2, 0x82, 0x49, 0x29, 0x12, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x98, 0x4a, 0xaa, 0xab, 0x55, 0x55, 0x56, 0xdb, 0xbd, 0x6e, 0xfa, 0xdf, 0xff, 0x7d, 0xfd, 0xab, 0x5f, 0xff, 0x56, 0xab, 0x52, 0x54, 0x80, 
-  0x6d, 0x6d, 0xd2, 0x88, 0x80, 0x11, 0x14, 0x10, 0x55, 0x2a, 0xa5, 0x4a, 0xaa, 0xaa, 0xd5, 0x55, 0x55, 0x48, 0x0b, 0x55, 0x55, 0x5a, 0xdb, 0xbb, 0x6d, 0x6b, 0xbb, 0xaf, 0xf6, 0xef, 0xf7, 0xd6, 0xad, 0x6f, 0x55, 0x5a, 0xdd, 0x48, 0x80, 0x08, 
-  0xb6, 0xaa, 0xa9, 0x22, 0x00, 0x00, 0x01, 0x4a, 0x92, 0xa4, 0x95, 0x55, 0x49, 0x55, 0x55, 0xb6, 0xd5, 0x54, 0x25, 0x55, 0xaa, 0xab, 0x55, 0x55, 0xb6, 0xdd, 0xee, 0xfd, 0x7f, 0xbf, 0xdf, 0x6b, 0x75, 0xb5, 0xb6, 0xeb, 0x6b, 0xe5, 0x24, 0x82, 
-  0xdb, 0xb7, 0x4a, 0x40, 0x00, 0x02, 0x48, 0x21, 0x48, 0x92, 0x54, 0xa9, 0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x02, 0xad, 0x55, 0xad, 0x6d, 0xb6, 0xdb, 0xb7, 0x7f, 0xef, 0xdd, 0xfd, 0xfa, 0xbd, 0xad, 0x5a, 0xdb, 0x5d, 0xad, 0x58, 0x80, 0x20, 
-  0x6d, 0x5a, 0xa4, 0x80, 0x00, 0x08, 0x05, 0x14, 0x25, 0x4a, 0xaa, 0x95, 0x55, 0x55, 0x55, 0x55, 0x52, 0x95, 0x01, 0x6a, 0xad, 0x6a, 0xb6, 0xdb, 0x6e, 0xfd, 0xd5, 0x37, 0x7f, 0xff, 0x6d, 0xd5, 0x56, 0xef, 0x6d, 0xb6, 0xda, 0xea, 0x54, 0x84, 
-  0xb6, 0xed, 0x92, 0x00, 0x00, 0x41, 0x50, 0xa2, 0x94, 0xa9, 0x49, 0x54, 0xaa, 0xaa, 0xb6, 0xaa, 0xaa, 0x55, 0x00, 0xaa, 0xd5, 0xad, 0xdb, 0x6d, 0xbb, 0xae, 0xb5, 0xdd, 0xf7, 0x6f, 0xf6, 0xb7, 0xfb, 0x55, 0xb6, 0xdb, 0x6f, 0x5b, 0x10, 0x10, 
-  0xdb, 0x56, 0xa8, 0x00, 0x04, 0x14, 0x0a, 0x14, 0xa5, 0x25, 0x2a, 0xaa, 0xa5, 0x55, 0x55, 0x5a, 0x92, 0xa4, 0x84, 0xb6, 0xb6, 0xb6, 0xad, 0xb7, 0x6e, 0xea, 0xda, 0xab, 0xff, 0xfe, 0xdb, 0xda, 0xad, 0xfa, 0xdb, 0x6d, 0xba, 0xed, 0xc9, 0x00, 
-  0x6d, 0xbb, 0x44, 0xaa, 0xa2, 0x82, 0xa1, 0x4a, 0x52, 0x95, 0x55, 0x55, 0x55, 0x55, 0x5a, 0xd5, 0xe8, 0x15, 0x40, 0x5a, 0xd5, 0x6b, 0x76, 0xdd, 0xf5, 0x2b, 0x56, 0xd5, 0xbb, 0xfb, 0xed, 0x6f, 0x6e, 0xaf, 0x6d, 0xdb, 0x6f, 0x56, 0x52, 0x4a, 
-  0xb6, 0xd5, 0xa9, 0x04, 0x10, 0x50, 0x14, 0xa1, 0x2a, 0x55, 0x54, 0x92, 0xaa, 0xaa, 0xab, 0x57, 0xbf, 0xc5, 0x40, 0x6b, 0x5b, 0xbd, 0xab, 0x76, 0x96, 0xda, 0xab, 0x5b, 0xff, 0xf5, 0x77, 0xb5, 0xb5, 0xf5, 0xdf, 0x76, 0xf5, 0xfb, 0xa8, 0x00, 
-  0xd5, 0x6e, 0x94, 0xb2, 0xaa, 0x95, 0xa5, 0x2d, 0x49, 0x52, 0x4a, 0xaa, 0xaa, 0xaa, 0xd5, 0x5f, 0xff, 0xf0, 0xa2, 0x2d, 0xad, 0x56, 0xfd, 0xda, 0xda, 0xaa, 0xb5, 0x55, 0x7f, 0xdf, 0xad, 0x5e, 0xef, 0x5f, 0x75, 0xbb, 0xbe, 0xaa, 0xd5, 0x52, 
-  0x5b, 0xb5, 0xaa, 0x95, 0x4a, 0x54, 0x52, 0x92, 0xa5, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5a, 0xfe, 0xff, 0xfe, 0x40, 0x35, 0x75, 0xdb, 0x4b, 0x65, 0x55, 0x55, 0x55, 0x55, 0x5f, 0xf5, 0x77, 0xf7, 0x7b, 0xb5, 0xbe, 0xde, 0xd5, 0xd6, 0xb5, 0x08, 
-  0xed, 0x5e, 0xd5, 0x54, 0xa9, 0x53, 0x4a, 0x54, 0x95, 0x55, 0x55, 0x55, 0x55, 0x55, 0x6b, 0xb7, 0xfe, 0xbb, 0x31, 0x16, 0xae, 0xb5, 0xbd, 0x9a, 0xaa, 0xaa, 0xaa, 0xaa, 0xfd, 0xdf, 0xbd, 0x5b, 0xad, 0x6e, 0xd5, 0xeb, 0xfe, 0xbb, 0x6c, 0xa2, 
-  0x56, 0xeb, 0x6a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xad, 0xff, 0x6f, 0x4a, 0xc4, 0x3b, 0xb5, 0xae, 0xd6, 0xc5, 0x55, 0x55, 0x55, 0x55, 0x2f, 0xb5, 0xd7, 0x6d, 0xf7, 0xb7, 0x7e, 0xbd, 0x57, 0x55, 0xb6, 0x94, 
-  0xfb, 0x55, 0xb6, 0xd5, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x56, 0xd7, 0xb7, 0xfa, 0xb6, 0xa8, 0x95, 0x5a, 0xf5, 0x7b, 0xf5, 0x55, 0x6a, 0xaa, 0xaa, 0xd7, 0xde, 0xfa, 0xdb, 0x5a, 0xda, 0xd7, 0xd7, 0xfb, 0xee, 0xda, 0xa2, 
-  0x4d, 0xbd, 0x5d, 0xbb, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x54, 0xaa, 0xaa, 0xab, 0x5e, 0xfd, 0xbe, 0x55, 0x50, 0x2d, 0xef, 0x5b, 0xde, 0xda, 0x55, 0x55, 0x55, 0x55, 0x5d, 0x77, 0x5f, 0x76, 0xef, 0x7f, 0x7a, 0xfa, 0xad, 0x5b, 0x6b, 0x54, 
-  0xb6, 0xd6, 0xeb, 0xed, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xda, 0xb7, 0xdf, 0xf6, 0xaa, 0xaa, 0x96, 0xb5, 0xef, 0x77, 0xff, 0x2a, 0xaa, 0xaa, 0xaa, 0xab, 0xdb, 0xeb, 0xdf, 0x5a, 0xd5, 0xdf, 0x5f, 0xfe, 0xed, 0xbd, 0xaa, 
-  0xdb, 0x6b, 0x5d, 0x7e, 0xdb, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x56, 0xa2, 0xbd, 0xb6, 0xfd, 0x56, 0xd0, 0x5b, 0x5e, 0xbd, 0xff, 0xfd, 0xca, 0xaa, 0xaa, 0xaa, 0xd6, 0xfd, 0x7d, 0x75, 0xf7, 0xff, 0x75, 0xea, 0xab, 0x56, 0xd6, 0xd5, 
-  0x6d, 0xbd, 0xab, 0x57, 0xf5, 0xed, 0xaa, 0xaa, 0xaa, 0xbe, 0xdb, 0x55, 0xba, 0xc2, 0xaf, 0x7f, 0xb6, 0xab, 0x2a, 0xae, 0xf7, 0xff, 0xee, 0xb7, 0xe5, 0x4a, 0x94, 0x95, 0x5b, 0x57, 0xaf, 0xdf, 0x5d, 0x55, 0xde, 0xbf, 0xfd, 0xfb, 0x7b, 0xaa, 
-  0xb6, 0xd6, 0xf5, 0xed, 0x7f, 0x5a, 0xdb, 0x6d, 0x76, 0xd7, 0xf7, 0xfe, 0xd5, 0x7d, 0xbb, 0xd5, 0xfc, 0x55, 0x5a, 0xbb, 0xff, 0xef, 0xbf, 0xfe, 0xfa, 0x29, 0x52, 0xaa, 0xaa, 0xfd, 0xf5, 0x75, 0xf7, 0xff, 0x77, 0xeb, 0x56, 0xad, 0xae, 0xea, 
-  0xda, 0xb5, 0xae, 0xb7, 0xaf, 0xff, 0x6d, 0xb5, 0xab, 0x7d, 0xbb, 0xbb, 0x5b, 0xaa, 0xdd, 0x7f, 0x6f, 0x56, 0xaa, 0xbf, 0xdd, 0xbd, 0xfb, 0xdb, 0xbd, 0x55, 0x55, 0x55, 0x5b, 0x6f, 0x5f, 0xdf, 0x7d, 0xab, 0xda, 0xbe, 0xf5, 0xd7, 0x77, 0x55, 
-  0x6b, 0xde, 0xdb, 0xba, 0xf5, 0x6f, 0xf7, 0x6e, 0xdd, 0xb7, 0xd7, 0xee, 0xed, 0x6f, 0xab, 0xdb, 0xf5, 0x29, 0x5f, 0x7d, 0xff, 0xff, 0xee, 0xff, 0xf7, 0x8a, 0xaa, 0xaa, 0xaa, 0xfb, 0xf5, 0x77, 0xaf, 0x7e, 0xff, 0xeb, 0xbe, 0xbd, 0xdb, 0xed, 
-  0xb6, 0xab, 0x6d, 0x6d, 0x5b, 0xba, 0xdf, 0xdb, 0x6b, 0x7e, 0xfe, 0xbd, 0xb7, 0xba, 0xf5, 0x6d, 0x5a, 0xa5, 0x75, 0xef, 0xff, 0xee, 0xbf, 0xde, 0xff, 0xf2, 0x95, 0x55, 0x6b, 0x1d, 0x5f, 0xdd, 0xfb, 0xdb, 0x55, 0x7e, 0xd5, 0xeb, 0x7d, 0x55, 
-  0xdb, 0x75, 0xb7, 0xb7, 0xad, 0xd7, 0x7d, 0xff, 0xff, 0xef, 0xaf, 0xf6, 0xed, 0xef, 0xbf, 0x55, 0x55, 0x55, 0xff, 0xfd, 0xfe, 0xfb, 0xfd, 0xfb, 0xde, 0xfa, 0x54, 0xaa, 0x94, 0xaf, 0xf6, 0xf7, 0x5d, 0x77, 0xff, 0xd7, 0x7e, 0xbe, 0xd7, 0xfa, 
-  0x6d, 0xae, 0xda, 0xda, 0xf6, 0xbb, 0xab, 0x7d, 0xdd, 0xfd, 0xfd, 0xdd, 0xff, 0x7f, 0xf7, 0xf6, 0xff, 0xff, 0xff, 0x6a, 0x5b, 0xbf, 0xf7, 0xef, 0xfb, 0xdd, 0x55, 0x55, 0x22, 0xaa, 0xdf, 0xbd, 0xf7, 0xdd, 0x55, 0x7d, 0xd7, 0xd7, 0xfa, 0xaf, 
-  0xb6, 0xdb, 0x6f, 0x6f, 0x5d, 0xed, 0x7e, 0xd7, 0x7f, 0xbf, 0xaf, 0xff, 0xbf, 0xfe, 0xff, 0xff, 0xed, 0xb7, 0x7b, 0xd5, 0x7f, 0xff, 0x7f, 0x7f, 0xef, 0x77, 0x92, 0x88, 0x55, 0x7f, 0xf5, 0xef, 0x5d, 0xf7, 0xff, 0xd7, 0x7a, 0xfa, 0xaf, 0xf9, 
-  0xdb, 0x6d, 0xb5, 0xb5, 0xeb, 0x5f, 0xd7, 0xbd, 0xeb, 0xed, 0xfe, 0xf7, 0xfd, 0xfb, 0xfd, 0xbf, 0xbf, 0xed, 0xef, 0x55, 0xbf, 0xed, 0xff, 0xfd, 0x7d, 0xdd, 0xea, 0xa2, 0xaf, 0xd6, 0xbf, 0x75, 0xf7, 0x5e, 0xdb, 0x7d, 0xdf, 0x5f, 0xfa, 0xb6, 
-  0x6d, 0xb6, 0xde, 0xde, 0xbd, 0xea, 0xba, 0xef, 0x7e, 0xbb, 0xb7, 0xbd, 0xef, 0xdf, 0xb7, 0xf5, 0xff, 0xf7, 0xff, 0x6f, 0xf6, 0xff, 0xf7, 0xdf, 0xd7, 0x77, 0x74, 0x0a, 0xda, 0xbd, 0xed, 0xdf, 0x5d, 0xfb, 0xee, 0xef, 0x6b, 0xea, 0xaf, 0xef, 
-  0xb6, 0xdb, 0x6b, 0x6b, 0x56, 0xbd, 0xdf, 0xbb, 0xab, 0xee, 0xfa, 0xef, 0x7f, 0xea, 0xff, 0xfe, 0xaa, 0xdb, 0xbd, 0xff, 0xff, 0xff, 0xfe, 0xf5, 0x7d, 0xdd, 0xbe, 0x2b, 0x6d, 0xef, 0xbf, 0x77, 0xf7, 0xae, 0xbb, 0xbb, 0xbd, 0x7f, 0xfa, 0xba, 
-  0xdb, 0x6d, 0xba, 0xdd, 0xed, 0xd6, 0xea, 0xed, 0xfe, 0xbb, 0xaf, 0xbb, 0xbf, 0x7f, 0xdf, 0xd5, 0xdf, 0xad, 0xff, 0xfd, 0xbf, 0xde, 0xdb, 0xbf, 0xd7, 0x6b, 0x6b, 0x8d, 0xbf, 0x7b, 0x75, 0xdd, 0x7e, 0xff, 0xef, 0xee, 0xef, 0xad, 0x6f, 0xee, 
-  0xb6, 0xdb, 0x6f, 0x6a, 0xb6, 0xed, 0xbf, 0x76, 0xab, 0xee, 0xfa, 0xed, 0xd5, 0xdb, 0x7f, 0xff, 0x75, 0xdb, 0xf7, 0xb7, 0xf7, 0x7b, 0xfe, 0xeb, 0x7d, 0xfe, 0xf6, 0xeb, 0xeb, 0xdf, 0xdf, 0x7f, 0xd7, 0xda, 0xfd, 0x7b, 0xba, 0xff, 0xda, 0xbb, 
-  0xdd, 0xb6, 0xd5, 0xbf, 0x5b, 0x5b, 0x6b, 0xbb, 0xfd, 0x77, 0x5f, 0xbf, 0x7f, 0x7f, 0xd5, 0xb5, 0xdf, 0x6f, 0xff, 0xff, 0xff, 0xef, 0x57, 0xbf, 0xd7, 0x57, 0xbd, 0xbe, 0xbe, 0xf5, 0xf7, 0xeb, 0x7d, 0x7f, 0xaf, 0xde, 0xef, 0xb5, 0xff, 0xed, 
-  0xb6, 0xed, 0xbe, 0xd5, 0xed, 0xb6, 0xdd, 0x6d, 0x57, 0xba, 0xea, 0xeb, 0xed, 0xea, 0xff, 0xff, 0xf7, 0xb7, 0xde, 0xff, 0x76, 0xfd, 0xfd, 0xf5, 0x7d, 0xfa, 0xef, 0xeb, 0xf7, 0xbf, 0x7d, 0xbf, 0xef, 0xea, 0xfb, 0x77, 0xba, 0xef, 0x5b, 0x56, 
-  0xdb, 0xb7, 0x6b, 0x6d, 0x5b, 0x5b, 0x6b, 0xb7, 0xba, 0xdf, 0x7f, 0xbe, 0xbf, 0xbf, 0xb6, 0xde, 0xdf, 0xdf, 0x7f, 0xf7, 0xdf, 0xaf, 0xb7, 0x5f, 0xdf, 0x5f, 0xb5, 0x7f, 0x6d, 0xed, 0xd7, 0xf5, 0xbb, 0x7f, 0xaf, 0xdd, 0xef, 0xbd, 0xff, 0xfb, 
-  0x6d, 0x6d, 0xdd, 0xb6, 0xed, 0xed, 0xb6, 0xdd, 0xdf, 0xea, 0xd5, 0xf7, 0xea, 0xed, 0xdf, 0xb7, 0xfd, 0x7f, 0xff, 0xdd, 0xf5, 0xfa, 0xfd, 0xfb, 0x75, 0xf6, 0xff, 0xdb, 0xff, 0x7f, 0x7e, 0xbf, 0xff, 0xdb, 0xfa, 0xf7, 0x5a, 0xf7, 0x6a, 0xad, 
-  0xdf, 0xbb, 0x6a, 0xdb, 0x56, 0xaa, 0xdb, 0x76, 0xea, 0xbb, 0xbf, 0x5d, 0x7f, 0xbe, 0xf5, 0xfd, 0xef, 0xbb, 0xf5, 0x7f, 0x5f, 0x6f, 0xdf, 0xbf, 0xff, 0xbf, 0xb6, 0xfe, 0xb7, 0xdb, 0xef, 0xed, 0x55, 0xfe, 0xbf, 0xbd, 0xf7, 0xbd, 0xff, 0xf6, 
-  0xb5, 0x6d, 0xbf, 0x6a, 0xb5, 0x55, 0x56, 0xdb, 0x5f, 0xd6, 0xed, 0xf7, 0xd6, 0xf7, 0xbf, 0x6f, 0x7b, 0xff, 0x5f, 0xeb, 0xfd, 0xfd, 0xf5, 0xea, 0xad, 0xea, 0xff, 0xab, 0xfd, 0xfe, 0xfa, 0xff, 0xff, 0x57, 0xeb, 0xd7, 0x5d, 0xef, 0x55, 0x5d, 
-  0xdb, 0xb6, 0xd2, 0xaa, 0xdb, 0x6e, 0xed, 0xbd, 0xf5, 0x7b, 0xbb, 0x7d, 0xbf, 0xdd, 0xed, 0xfb, 0xde, 0xdb, 0xfb, 0x7e, 0xd7, 0xaf, 0x5f, 0x7f, 0xff, 0x7f, 0xd5, 0xff, 0x6f, 0x57, 0xbf, 0xb6, 0xed, 0xfd, 0x7e, 0xfd, 0xee, 0xbb, 0xff, 0xf7, 
-  0xbd, 0xdb, 0x6d, 0xb6, 0xaa, 0xaa, 0xb6, 0xeb, 0x5b, 0x56, 0xef, 0xd7, 0xf5, 0x77, 0x7f, 0x5e, 0xf7, 0xfe, 0xdf, 0xdb, 0xfe, 0xfb, 0xfb, 0xdb, 0x6b, 0xdb, 0x7f, 0x6d, 0xfb, 0xfe, 0xed, 0xff, 0xbf, 0xb7, 0xd7, 0x56, 0xb7, 0xee, 0xaa, 0xbd, 
-  0xd6, 0xed, 0xb6, 0xaa, 0xad, 0x55, 0xab, 0x5d, 0xed, 0xdf, 0x7a, 0xfd, 0x5f, 0xdd, 0xd5, 0xf7, 0xbd, 0x6b, 0xf5, 0x7f, 0x6f, 0xde, 0xde, 0xff, 0xfe, 0xff, 0xed, 0xff, 0xae, 0xdb, 0xff, 0x6b, 0xf6, 0xed, 0x7b, 0xff, 0xda, 0xbb, 0xff, 0xd6, 
-  0x7b, 0x5e, 0xda, 0xd5, 0xb5, 0xb6, 0xb5, 0xeb, 0x5b, 0x6b, 0xaf, 0xaf, 0xf6, 0xff, 0x7f, 0xbd, 0xef, 0xff, 0x5f, 0xed, 0xfa, 0xf7, 0xf7, 0xaa, 0xb7, 0xaa, 0xff, 0xb6, 0xff, 0xff, 0x6b, 0xfe, 0xdf, 0xbf, 0xdd, 0x55, 0x7f, 0xee, 0xaa, 0xbb, 
-  0xd6, 0xeb, 0x6b, 0x5a, 0xaa, 0xaa, 0xde, 0xb6, 0xed, 0xbd, 0xfa, 0xfa, 0xdf, 0xab, 0xda, 0xef, 0x7b, 0x5b, 0xfb, 0xbf, 0x5f, 0xbd, 0x5d, 0xff, 0xfd, 0xff, 0xad, 0xff, 0xdb, 0x6d, 0xff, 0x6f, 0xf5, 0xea, 0xef, 0xff, 0xaa, 0xbb, 0xfd, 0xd6, 
-  0xbb, 0x5d, 0xad, 0x55, 0x55, 0x5b, 0x52, 0xdb, 0x5b, 0x6b, 0x57, 0xaf, 0xba, 0xfe, 0xff, 0xfb, 0xdf, 0xfe, 0xde, 0xf5, 0xf6, 0xef, 0xff, 0x6d, 0xaf, 0x6d, 0xff, 0x5a, 0xff, 0xff, 0xb7, 0xfa, 0xbe, 0xbf, 0xba, 0xaa, 0xf6, 0xd6, 0xab, 0x7b, 
-  0xd5, 0xea, 0xb5, 0x6a, 0xaa, 0xd5, 0x5b, 0x6d, 0xed, 0xb6, 0xfa, 0xfa, 0xef, 0xb7, 0xab, 0x5e, 0xf6, 0xdb, 0xf7, 0xdf, 0xdf, 0xfb, 0xb5, 0xff, 0xfb, 0xff, 0x6b, 0xff, 0xda, 0xaa, 0xfd, 0x5f, 0xeb, 0xea, 0xef, 0xf7, 0x5b, 0x7b, 0xb6, 0xad, 
-  0x6e, 0xbf, 0x55, 0xad, 0xb5, 0x55, 0x55, 0xae, 0xb6, 0xdb, 0x57, 0x5f, 0xba, 0xed, 0xff, 0xf7, 0xbf, 0xff, 0x7d, 0xfb, 0x7b, 0x5e, 0xff, 0xb5, 0x6e, 0xb7, 0xfe, 0xdb, 0x7f, 0xff, 0xdf, 0xfb, 0xbe, 0xbf, 0xba, 0xad, 0xed, 0xad, 0x6d, 0xeb, 
-  0xb5, 0xa9, 0xda, 0xaa, 0xaa, 0xb6, 0xaa, 0xb5, 0x5a, 0xad, 0xbd, 0xea, 0xef, 0xbe, 0xb5, 0x7d, 0xea, 0xad, 0xd7, 0x6f, 0xef, 0xf7, 0xdb, 0xff, 0xff, 0xfd, 0xb7, 0xff, 0xed, 0xad, 0xf6, 0xee, 0xeb, 0xeb, 0xef, 0xf6, 0xb6, 0xf7, 0xb6, 0xbd, 
-  0xdb, 0x6e, 0xad, 0x55, 0x56, 0xd5, 0x55, 0x5b, 0xab, 0x6a, 0xd7, 0x7f, 0xbd, 0xeb, 0xff, 0xd7, 0x7f, 0xff, 0x7f, 0xfd, 0xbd, 0xbe, 0xfe, 0xad, 0xb5, 0xaf, 0xfe, 0xda, 0xff, 0xfb, 0x5f, 0xbf, 0xbe, 0xbd, 0x7a, 0xad, 0xdb, 0x5a, 0xdb, 0xd6, 
-  0x56, 0xdb, 0x6b, 0x6d, 0xaa, 0xaa, 0xaa, 0xd5, 0x6d, 0x5b, 0x7b, 0xaa, 0xef, 0x7e, 0xd6, 0xfd, 0xdb, 0x6d, 0xf6, 0xb7, 0xf7, 0xef, 0xb7, 0xff, 0xff, 0xfa, 0xab, 0xff, 0xaa, 0xdf, 0xfb, 0xf5, 0xeb, 0xd7, 0xaf, 0xdb, 0x6d, 0xef, 0x6d, 0x6b, 
-  0xbb, 0x6a, 0xb5, 0xb6, 0xb5, 0x5b, 0x55, 0x6d, 0xb5, 0xad, 0xad, 0xff, 0x7b, 0xab, 0xbb, 0xaf, 0x7f, 0xff, 0xbf, 0xfd, 0x7d, 0x7b, 0xfd, 0xb5, 0x56, 0xdf, 0xff, 0x6d, 0xff, 0xf6, 0xee, 0xdf, 0x7e, 0xfd, 0xfa, 0xbd, 0xb6, 0xb5, 0xb7, 0xbd, 
-  0xd5, 0xb7, 0x5a, 0xaa, 0xd6, 0xd5, 0x6b, 0x56, 0xaa, 0xb5, 0xf6, 0xaa, 0xd6, 0xfd, 0xd5, 0x7b, 0xea, 0xd6, 0xed, 0xdf, 0xdf, 0xde, 0xae, 0xff, 0xff, 0x76, 0xed, 0xff, 0xbb, 0x7f, 0xbf, 0xf7, 0xd5, 0xae, 0xaf, 0xd7, 0x6d, 0xda, 0xda, 0xd6, 
-  0x5d, 0x5a, 0xed, 0x55, 0x55, 0x5a, 0xad, 0x5a, 0xd5, 0x56, 0xaf, 0xb7, 0x7b, 0x44, 0x55, 0xae, 0xbf, 0xff, 0xff, 0x76, 0xf6, 0xf7, 0xf7, 0xab, 0x6b, 0xff, 0xbf, 0xb6, 0xef, 0xd5, 0xf6, 0xbd, 0x7e, 0xf7, 0xf5, 0x7a, 0xdb, 0x6f, 0x6e, 0xb5, 
-  0xab, 0xab, 0x55, 0xb6, 0xaa, 0xab, 0x55, 0x6b, 0x55, 0x55, 0xb5, 0x59, 0xad, 0x12, 0x92, 0xb7, 0xf6, 0xb5, 0x5b, 0xdf, 0xbb, 0x5d, 0x5a, 0xf6, 0xfe, 0xd6, 0xf6, 0xff, 0xfd, 0xff, 0x7f, 0xef, 0xd7, 0x5a, 0xbf, 0xaf, 0x76, 0xb5, 0xb5, 0xdb, 
-  0xda, 0xb5, 0x56, 0xaa, 0xb6, 0xd5, 0x55, 0xad, 0x5a, 0xad, 0x5b, 0xaa, 0xa2, 0x88, 0x4a, 0xaa, 0xbf, 0xff, 0xfe, 0xf5, 0xd5, 0xaa, 0xad, 0x5b, 0xab, 0xff, 0xdf, 0xdb, 0x6f, 0x6d, 0xdb, 0x7a, 0xfa, 0xef, 0xd5, 0x75, 0xdd, 0xda, 0xde, 0xad, 
-  0x6d, 0x55, 0x6a, 0xaa, 0xd5, 0x5a, 0xaa, 0xaa, 0xd5, 0x56, 0xed, 0x69, 0x14, 0x45, 0x22, 0x55, 0x6a, 0xaa, 0xab, 0xbe, 0x6e, 0xdb, 0x56, 0xd6, 0xfe, 0xaa, 0xfb, 0x7f, 0xfd, 0xff, 0xff, 0xdf, 0x57, 0xb5, 0x7b, 0xbb, 0x6b, 0x6f, 0x6b, 0xf6, 
-  0xb5, 0xad, 0xaa, 0x95, 0x56, 0xd5, 0x5b, 0x55, 0x55, 0xb5, 0xaa, 0xa4, 0xa9, 0x10, 0x94, 0x8a, 0xab, 0x75, 0x56, 0xd5, 0xaa, 0xad, 0x55, 0x6b, 0x57, 0xff, 0xaf, 0xed, 0xb7, 0xb6, 0xdb, 0x75, 0xfa, 0xde, 0xd6, 0xd6, 0xdd, 0xb5, 0xb5, 0x5b, 
-  0xad, 0x55, 0x55, 0x55, 0x5a, 0xaa, 0xd5, 0x6d, 0x55, 0x56, 0xb6, 0xaa, 0x44, 0x45, 0x22, 0x52, 0xa9, 0x4d, 0xbb, 0xba, 0x55, 0x6a, 0xab, 0x5d, 0xf5, 0x2a, 0xfd, 0xbf, 0xff, 0xff, 0xff, 0xfe, 0xaf, 0x75, 0xbb, 0x7b, 0x6e, 0xde, 0xde, 0xd6, 
-  0xb5, 0x6a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xab, 0x55, 0x41, 0x12, 0x10, 0x91, 0x09, 0x15, 0x56, 0xad, 0x6d, 0x56, 0xb5, 0x55, 0x6a, 0xaa, 0xdb, 0x57, 0x76, 0xda, 0xdb, 0x6d, 0xab, 0xf5, 0xae, 0xed, 0xae, 0xf5, 0xb5, 0x6b, 0x7b, 
-  0x56, 0xb7, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0xb5, 0xba, 0xaa, 0xaa, 0x44, 0x8a, 0x4a, 0x54, 0xaa, 0x52, 0xb6, 0xb5, 0x55, 0x55, 0x55, 0x57, 0x5b, 0x6d, 0x6d, 0xdf, 0xff, 0xff, 0xff, 0xfe, 0xae, 0xf7, 0x5b, 0xf5, 0xae, 0xef, 0xbd, 0xad, 
-  0xdb, 0x59, 0x55, 0x55, 0x55, 0x55, 0x56, 0xaa, 0xaa, 0xab, 0x55, 0x48, 0x21, 0x21, 0x11, 0x25, 0x52, 0xad, 0x55, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xed, 0x55, 0xb7, 0x7a, 0xad, 0xaa, 0xaa, 0xb7, 0xf7, 0x5b, 0xee, 0xaf, 0x77, 0x5a, 0xd6, 0xee, 
-  0x6d, 0xad, 0x55, 0x55, 0x54, 0xaa, 0xaa, 0xd5, 0x55, 0x6d, 0x54, 0x92, 0x94, 0x14, 0x4a, 0x92, 0x4a, 0x92, 0xaa, 0xaa, 0xd5, 0x55, 0x55, 0x55, 0x2a, 0xad, 0x5a, 0xdf, 0xff, 0xff, 0xff, 0xfd, 0x5a, 0xed, 0x5b, 0x75, 0xba, 0xed, 0x75, 0xb5, 
-  0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x95, 0x55, 0x56, 0xab, 0x55, 0x52, 0x41, 0x21, 0x41, 0x20, 0x4a, 0xa9, 0x55, 0x55, 0x6b, 0x54, 0xaa, 0xaa, 0xab, 0xd5, 0xb6, 0xef, 0x76, 0xda, 0xdb, 0xb6, 0xd7, 0xef, 0x77, 0x75, 0xae, 0xd7, 0x77, 0xae, 0xdf, 
-  0xb6, 0xd5, 0x6a, 0xa9, 0x55, 0x55, 0x5a, 0xaa, 0xb5, 0x6d, 0x4a, 0x94, 0x88, 0x14, 0x95, 0x29, 0x25, 0x55, 0x5b, 0xaa, 0xaa, 0xa5, 0x55, 0x55, 0x5a, 0xab, 0x55, 0xdb, 0xf7, 0xfe, 0xff, 0xfd, 0x5b, 0xad, 0xae, 0xf7, 0x7b, 0xad, 0x77, 0x6a, 
-  0xab, 0x55, 0xab, 0x55, 0x4a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa8, 0x49, 0x25, 0x42, 0x42, 0x84, 0xaa, 0xaa, 0xaa, 0xad, 0x55, 0x55, 0x4a, 0xad, 0x55, 0x55, 0x5a, 0xbe, 0xbe, 0xab, 0xb5, 0x57, 0xed, 0x76, 0xfb, 0x5a, 0xdd, 0x77, 0xba, 0xdf, 
-  0xba, 0xaa, 0xad, 0x55, 0x54, 0xaa, 0xaa, 0xaa, 0xab, 0x55, 0x55, 0x22, 0x10, 0x29, 0x28, 0x52, 0x95, 0x55, 0xad, 0x75, 0x55, 0x55, 0x55, 0x55, 0x6a, 0xb5, 0xaf, 0xd7, 0xdb, 0xfe, 0xef, 0xfd, 0x77, 0xbb, 0xad, 0xef, 0x6b, 0xba, 0xd7, 0x75, 
-  0xd6, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xb6, 0x92, 0x88, 0x85, 0x04, 0x85, 0x09, 0x55, 0x56, 0xb5, 0x95, 0x55, 0x55, 0x55, 0x56, 0xad, 0x56, 0xd5, 0x7a, 0xee, 0xab, 0xbb, 0x57, 0xba, 0xdd, 0x77, 0x75, 0xbd, 0xd7, 0x7b, 0xbb, 
-  0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x48, 0x42, 0x50, 0xa9, 0x20, 0xa4, 0x4a, 0xaa, 0xd6, 0xed, 0xb5, 0x55, 0x55, 0x6a, 0xd5, 0xaa, 0xba, 0xab, 0x7b, 0xfe, 0xee, 0xfd, 0x5f, 0x6b, 0xdb, 0xae, 0xeb, 0x7b, 0xad, 0xd6, 
-  0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xd4, 0xa5, 0x10, 0x0a, 0x12, 0x14, 0x12, 0xa9, 0x55, 0x55, 0x2a, 0xd5, 0x6a, 0xaa, 0xaa, 0xaa, 0xb6, 0xd7, 0xad, 0xae, 0xab, 0xbb, 0xaf, 0xea, 0xfe, 0xb6, 0xf7, 0x5d, 0xad, 0x76, 0xbd, 
-  0xdb, 0x75, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x28, 0x8a, 0xa0, 0x88, 0xa2, 0x89, 0x55, 0x55, 0x55, 0xb6, 0xaa, 0xaa, 0x95, 0x55, 0x56, 0xd5, 0x5a, 0xdb, 0x75, 0xfd, 0xdd, 0xf5, 0x7f, 0xab, 0xdd, 0xad, 0xf6, 0xf7, 0xdf, 0xd7, 
-  0x6d, 0x55, 0x5a, 0xab, 0x55, 0x55, 0x55, 0x55, 0x5a, 0xaa, 0x92, 0x40, 0x0a, 0x44, 0x10, 0x55, 0x2a, 0xaa, 0xda, 0xab, 0x5b, 0x55, 0x52, 0xaa, 0xaa, 0xab, 0x6a, 0xad, 0xaf, 0x56, 0xee, 0xbf, 0xaa, 0xf6, 0xf7, 0x7b, 0x5b, 0xad, 0x6a, 0xfa, 
-  0xaa, 0xaa, 0xaa, 0xb5, 0x6a, 0xaa, 0xaa, 0xaa, 0xab, 0x55, 0x49, 0x2a, 0xa0, 0x29, 0x4a, 0x89, 0x55, 0x5b, 0x55, 0x5a, 0xaa, 0xaa, 0xaa, 0x49, 0x55, 0x55, 0x57, 0x76, 0xda, 0xfb, 0x77, 0xd5, 0x7f, 0x5d, 0xad, 0xdd, 0xee, 0xf7, 0xbf, 0x5f, 
-  0x55, 0xad, 0xaa, 0xd5, 0x55, 0x55, 0x55, 0x55, 0x55, 0x68, 0xa4, 0x00, 0x0a, 0x84, 0x91, 0x55, 0x55, 0x6a, 0xad, 0xad, 0xb5, 0x55, 0x55, 0x55, 0x55, 0x5a, 0xba, 0xab, 0x6f, 0x57, 0xad, 0x7f, 0xd5, 0xee, 0xff, 0x6e, 0xbb, 0x5d, 0xea, 0xea, 
-  0xaa, 0xb5, 0x55, 0x55, 0x5b, 0x6b, 0x6b, 0x55, 0x55, 0x55, 0x12, 0xaa, 0xa0, 0x52, 0x4a, 0x25, 0x55, 0x56, 0xd6, 0xd5, 0x56, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xcb, 0x5a, 0xb5, 0xed, 0x77, 0xaa, 0xfe, 0xb7, 0xab, 0xb7, 0xdd, 0xee, 0xbf, 0x7f, 
-  0x56, 0xaa, 0xaa, 0xaa, 0xaa, 0xad, 0x55, 0x55, 0x55, 0x54, 0xa4, 0x00, 0x15, 0x29, 0x25, 0x54, 0xaa, 0xaa, 0xb5, 0x6d, 0xb5, 0x6a, 0xaa, 0xaa, 0xab, 0x55, 0x75, 0xad, 0x56, 0xb6, 0xda, 0xff, 0x55, 0xfa, 0xfd, 0xfa, 0xeb, 0x77, 0xd5, 0xaa, 
-  0xaa, 0xaa, 0xaa, 0xab, 0x6a, 0xaa, 0xad, 0x6a, 0xaa, 0xaa, 0x91, 0x55, 0x42, 0x94, 0x94, 0xaa, 0x95, 0x56, 0xdb, 0x56, 0xdb, 0x5b, 0x6d, 0x55, 0x55, 0x56, 0x9a, 0xd5, 0xb5, 0x5b, 0x6f, 0x55, 0xff, 0x5f, 0xae, 0xaf, 0x7f, 0xba, 0xbe, 0xff, 
-  0x5a, 0xaa, 0xad, 0x55, 0x55, 0x55, 0xb5, 0xaa, 0xdb, 0x52, 0x48, 0x00, 0x28, 0x42, 0x52, 0xa5, 0x55, 0x55, 0x55, 0xb5, 0x55, 0xad, 0x55, 0xb5, 0x6d, 0x6a, 0xeb, 0x56, 0xad, 0xad, 0xb5, 0xfe, 0xaa, 0xea, 0xf7, 0xfb, 0xaa, 0xdf, 0xeb, 0xab, 
-  0xaa, 0xd5, 0x55, 0x6d, 0x5b, 0x6d, 0x56, 0xab, 0x55, 0x55, 0x25, 0x55, 0x45, 0x29, 0x2a, 0x55, 0x55, 0x55, 0x6d, 0x56, 0xda, 0xd5, 0xb6, 0xdb, 0x55, 0xab, 0x2d, 0x5a, 0xd6, 0xf6, 0xda, 0xab, 0xff, 0xbf, 0x5a, 0xad, 0xff, 0xea, 0xbe, 0xfd, 
-  0x55, 0x55, 0x6a, 0xaa, 0xd5, 0xb5, 0xaa, 0xad, 0x55, 0x52, 0x90, 0x02, 0x29, 0x55, 0x45, 0x55, 0x55, 0x56, 0xaa, 0xdb, 0x56, 0xb6, 0xda, 0xad, 0xb6, 0xaa, 0xd5, 0x6b, 0x75, 0x5b, 0x6f, 0xdd, 0x55, 0x6b, 0xff, 0xfe, 0xaa, 0xbf, 0xd7, 0xaf, 
-  0xad, 0xaa, 0xab, 0x57, 0x6d, 0x56, 0xba, 0xb5, 0x55, 0x48, 0x4a, 0xa9, 0x44, 0x88, 0xaa, 0xaa, 0xaa, 0xaa, 0xdb, 0x6a, 0xb5, 0x5a, 0xaa, 0xaa, 0xaa, 0xb5, 0x6a, 0xad, 0x56, 0xad, 0xb5, 0x77, 0xfb, 0xfd, 0x55, 0x57, 0xff, 0xd5, 0x7a, 0xfa, 
-};
-
-
-#endif
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/epd_interface.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/epd_interface.cpp
@@ -7,6 +7,7 @@

 #include "epd_interface.h"
 #include "uc8159-var-m2.h"
+#include "uc8176-var-m2.h"

 #include "mz100/printf.h"
 #include "mz100/eeprom.h"
@@ -30,12 +31,19 @@ extern "C" {

 __attribute__((section(".aonshadow"))) epdInterface *epd;
 __attribute__((section(".aonshadow"))) tagSpecs tag;
-epdInterface::~epdInterface(){
-    
+epdInterface::~epdInterface() {
 }

 void epdSetup() {
-    epd = new uc8159;
+    switch (tagProfile.controllerType) {
+        case 0:
+            epd = new uc8159;
+            break;
+        case 1:
+            epd = new uc8176;
+            break;
+    }
+
    epd->effectiveXRes = tagProfile.xRes;
    epd->effectiveYRes = tagProfile.yRes;
    epd->Xres = tagProfile.xRes;
@@ -66,7 +74,7 @@ void selectLUT(uint8_t sel) {
 static void busyWaitUntilHigh(uint32_t timeout) {
    uint32_t v2 = 0;
    while (GPIO_ReadPinLevel(EPD_BUSY) == GPIO_IO_LOW) {
-        delay(10000);
+        delay(50);
        v2++;
        if (v2 > timeout)
            break;
@@ -78,7 +86,7 @@ static void busyWaitUntilHigh(uint32_t timeout) {
 static void busyWaitUntilLow(uint32_t timeout) {
    uint32_t v2 = 0;
    while (GPIO_ReadPinLevel(EPD_BUSY) == GPIO_IO_HIGH) {
-        delay(10000);
+        delay(50);
        v2++;
        if (v2 > timeout)
            break;
@@ -107,7 +115,7 @@ void softSPIWriteByte(char byteOut) {
        GPIO_WritePinOutput(EPD_CLK, GPIO_IO_LOW);
        byteOut *= 2;
        loopCount++;
-        delay(1);
+        delay_us(1);
    } while (loopCount < 8);
    GPIO_WritePinOutput(EPD_MOSI, GPIO_IO_LOW);
    delay_us(1);
@@ -134,7 +142,7 @@ uint8_t softSPIReadByte() {
            readByte |= 1u;
        GPIO_WritePinOutput(EPD_CLK, GPIO_IO_LOW);
        delay_us(1);
-        delay(1);
+        // delay(1);
        loopCount++;
    } while (loopCount < 8);
    GPIO_SetPinDir(EPD_MOSI, GPIO_OUTPUT);
@@ -144,7 +152,9 @@ uint8_t softSPIReadByte() {
    GPIO_WritePinOutput(EPD_CS, GPIO_IO_HIGH);
    delay_us(1);
    GPIO_WritePinOutput(EPD_BS, GPIO_IO_LOW);
-    delay(1);
+    // delay(1);
+    delay_us(1);
+
    return readByte;
 }

--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/main.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/main.cpp
@@ -51,11 +51,9 @@ extern void dump(const uint8_t *a, const uint16_t l);
 uint64_t __attribute__((section(".ver"))) mCurVersionExport = SW_VER_CURRENT;
 uint64_t __attribute__((section(".fwmagic"))) magic = FW_MAGIC;

-char macStr[32];
-char macStr1[32];
-
 #define TAG_MODE_CHANSEARCH 0
 #define TAG_MODE_ASSOCIATED 1
+#define TAG_MODE_DEEPSLEEP 0x10

 __attribute__((section(".aon"))) uint8_t currentTagMode = TAG_MODE_CHANSEARCH;
 __attribute__((section(".aon"))) volatile struct zigbeeCalibDataStruct zigbeeCalibData;
@@ -91,7 +89,7 @@ static void initTagProfile() {
    }

    tag.imageSize = flashRoundUp(sizeof(struct EepromImageHeader) + (tagProfile.xRes * tagProfile.yRes * tagProfile.bpp) / 8);
-    tag.OEPLtype = 0x05;
+    tag.OEPLtype = tagProfile.OEPLType;
 }

 uint8_t showChannelSelect() {  // returns 0 if no accesspoints were found
@@ -104,7 +102,9 @@ uint8_t showChannelSelect() {  // returns 0 if no accesspoints were found
            if (detectAP(channelList[c])) {
                if (mLastLqi > result[c])
                    result[c] = mLastLqi;
-                printf("Channel: %d - LQI: %d RSSI %d\n", channelList[c], mLastLqi, mLastRSSI);
+#ifdef DEBUG_MAIN
+                printf("MAIN: Channel: %d - LQI: %d RSSI %d\n", channelList[c], mLastLqi, mLastRSSI);
+#endif
            }
        }
    }
@@ -292,6 +292,17 @@ int32_t setupCLKCalib() {
    return -1;
 }

+void checkWDT() {
+    uint32_t val1 = WDT_GetCounterVal();
+    delay(10000);
+    uint32_t val2 = WDT_GetCounterVal();
+    if (val1 == val2) {
+        printf("WDT: Not running!\n");
+    } else {
+        printf("WDT: 1: %lu 2: %lu divider is now %lu\n", val1, val2, (val2 - val1) / 10000);
+    }
+}
+
 void TagAssociated() {
    // associated
    struct AvailDataInfo *avail;
@@ -308,8 +319,9 @@ void TagAssociated() {

        // check if the battery level is below minimum, and force a redraw of the screen

-        if ((lowBattery && !lowBatteryShown && tagSettings.enableLowBatSymbol) || (noAPShown && tagSettings.enableNoRFSymbol)) {
-            printf("For some reason, we're going to redraw the image. lowbat=%d, lowbatshown=%d, noAPShown=%d\n", lowBattery, lowBatteryShown, noAPShown);
+        if ((lowBattery && !lowBatteryShown && tagSettings.enableLowBatSymbol) ||
+            (!lowBattery && lowBatteryShown) ||
+            (noAPShown && tagSettings.enableNoRFSymbol)) {
            // Check if we were already displaying an image
            if (curImgSlot != 0xFF) {
                powerUp(INIT_EEPROM | INIT_EPD);
@@ -317,15 +329,16 @@ void TagAssociated() {
                drawImageFromEeprom(curImgSlot, 0);
                powerDown(INIT_EEPROM | INIT_EPD);
            } else {
-                WDT_RestartCounter();
-                powerUp(INIT_EPD);
+                wdt60s();
                showAPFound();
-                powerDown(INIT_EPD);
+                wdt60s();
            }
        }

        powerUp(INIT_RADIO);
-        printf("full request\n");
+#ifdef DEBUG_MAIN
+        printf("MAIN: full request\n");
+#endif
        avail = getAvailDataInfo();
        avail = getAvailDataInfo();
        powerDown(INIT_RADIO);
@@ -398,6 +411,7 @@ void TagChanSearch() {
    // Check if we should redraw the screen with icons, info screen or screensaver
    if ((!currentChannel && !noAPShown && tagSettings.enableNoRFSymbol) ||
        (lowBattery && !lowBatteryShown && tagSettings.enableLowBatSymbol) ||
+        (!lowBattery && lowBatteryShown) ||
        (scanAttempts == (INTERVAL_1_ATTEMPTS + INTERVAL_2_ATTEMPTS - 1))) {
        powerUp(INIT_EPD);
        wdt60s();
@@ -415,7 +429,9 @@ void TagChanSearch() {

    // did we find a working channel?
    if (currentChannel) {
+#ifdef DEBUG_PROTO
        printf("PROTO: Found a working channel from the TagChanSearch loop\n");
+#endif
        // now associated! set up and bail out of this loop.
        scanAttempts = 0;
        wakeUpReason = WAKEUP_REASON_NETWORK_SCAN;
@@ -425,10 +441,15 @@ void TagChanSearch() {
        return;
    } else {
        // still not associated
-        doSleep(getNextScanSleep(true) * 1000UL);
+        sleep_with_with_wakeup(getNextScanSleep(true) * 1000UL);
    }
 }

+void tagDeepSleep() {
+    printf("MAIN: long sleepy\n");
+    sleep_with_with_wakeup(1800 * 1000UL);
+}
+
 int main(void) {
    (*(volatile unsigned int *)0x20124000) = 0x100004;    // On WARM RESET: Goto this address. -> entry
    (*(volatile unsigned int *)0xE000ED08) = 0x20100000;  // Vector table in RAM and offset 0x4000
@@ -442,7 +463,7 @@ int main(void) {
    setupCLKCalib();
    if (!loadValidateAonRam() || PMU_GetLastResetCause()) {
        // cold boot!
-
+        printf("BOOT: Cold boot!\n");
        // calibrate the 32K RC oscillator (autocal), we'll store the result to flash later
        uint32_t rtccal = setupRTC(0);
        setupGPIO();
@@ -463,12 +484,13 @@ int main(void) {
            } else {
                fs->deleteFile((char *)"tagprofile.bin");
            }
+        } else {
+            printf("BOOT: Loaded tag settings from EEPROM\n");
        }
-        printf("MAIN: MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", tagProfile.macAddress[0], tagProfile.macAddress[1], tagProfile.macAddress[2], tagProfile.macAddress[3], tagProfile.macAddress[4], tagProfile.macAddress[5], tagProfile.macAddress[6], tagProfile.macAddress[7]);
-
+        printf("BOOT: MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", tagProfile.macAddress[0], tagProfile.macAddress[1], tagProfile.macAddress[2], tagProfile.macAddress[3], tagProfile.macAddress[4], tagProfile.macAddress[5], tagProfile.macAddress[6], tagProfile.macAddress[7]);
        tagProfile.RC32Kcal = rtccal;

-        printf("MAIN: Rst reason: %i\r\n", PMU_GetLastResetCause());
+        printf("BOOT: Rst reason: %i\r\n", PMU_GetLastResetCause());

        initTagProfile();

@@ -484,17 +506,17 @@ int main(void) {
        doVoltageReading();

        currentChannel = showChannelSelect();
+        radioShutdown();
        if (currentChannel) {
-            printf("MAIN: AP Found\r\n");
+            printf("BOOT: AP Found\n");
            wdt10s();
            delay(10000);
            showAPFound();
-            sprintf(macStr1, "MAIN: OpenEPaperLink Ch: %i", currentChannel);
            wdt10s();
            timerDelay(TIMER_TICKS_PER_MSEC * 1000);
            currentTagMode = TAG_MODE_ASSOCIATED;
        } else {
-            printf("No AP found\r\n");
+            printf("BOOT: No AP found\n");
            wdt10s();
            delay(10000);
            showNoAP();
@@ -503,6 +525,9 @@ int main(void) {
            currentTagMode = TAG_MODE_CHANSEARCH;
        }
        writeSettings();
+        printf("BOOT: Cold boot complete\n");
+        sleep_with_with_wakeup(5 * 1000UL);
+
    } else {
        setupRTC(tagProfile.RC32Kcal);
        setupWDT();
@@ -519,6 +544,9 @@ int main(void) {
            case TAG_MODE_CHANSEARCH:
                TagChanSearch();
                break;
+            case TAG_MODE_DEEPSLEEP:
+                tagDeepSleep();
+                break;
        }
    }
    return 0;
@@ -543,7 +571,6 @@ void applyUpdate(uint32_t size) {
    setupCLKCalib();
    setupRTC(0);

-
    uint64_t test;
    FLASH_Read((FLASH_ReadMode_Type)0, fsEnd + 0x0168, (uint8_t *)&test, 8);
    if (test != magic) {
@@ -570,5 +597,38 @@ void applyUpdate(uint32_t size) {
    }
    printf("Resetting!\n");
    delay(1000);
-    sleep_with_with_wakeup(1000);
+    NVIC_SystemReset();
+    while (1)
+        ;
 }
+
+void executeCommand(uint8_t cmd) {
+    printf("executing command %d \n", cmd);
+    delay(20);
+    switch (cmd) {
+        case CMD_DO_REBOOT:
+            NVIC_SystemReset();
+            break;
+        case CMD_DO_RESET_SETTINGS:
+            break;
+        case CMD_DO_SCAN:
+            currentChannel = showChannelSelect();
+            break;
+        case CMD_ERASE_EEPROM_IMAGES:
+            eraseImageBlocks();
+            break;
+        case CMD_GET_BATTERY_VOLTAGE:
+            doVoltageReading();
+            // ensure
+            longDataReqCounter = LONG_DATAREQ_INTERVAL + 1;
+            sleep_with_with_wakeup(2 * 1000UL);
+            break;
+        case CMD_DO_DEEPSLEEP:
+            showLongTermSleep();
+            currentTagMode = TAG_MODE_DEEPSLEEP;
+            break;
+        default:
+            printf("Unimplemented command 0x%02X\n", cmd);
+            break;
+    }
+}
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/main.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/main.h
@@ -31,3 +31,4 @@

 #define RADIO_FIRST_CHANNEL				(11)		//2.4-GHz channels start at 11
 void applyUpdate(uint32_t len);
+void executeCommand(uint8_t cmd);
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/marker.txt
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/marker.txt
@@ -0,0 +1 @@
+MAC_BEGINS_HERE>
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/mkfs.oepl
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/mkfs.oepl
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/mkfs.oepl.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/mkfs.oepl.cpp
@@ -16,7 +16,8 @@


 #define PROGMEM 
-#define WINDOW_SIZE 12 // 4096 bytes
+//#define WINDOW_SIZE 12 // 4096 bytes
+#define WINDOW_SIZE 10 // 1024 bytes
 #define FILENAME_LENGTH 32


@@ -243,6 +244,7 @@ int main(){
 	saveFontData(&FreeSans9pt7b, (char*)"font/FreeSans9pt7b");

 	/* OTHER STUFF */
+	addFileFromFS("marker.txt", false);
 	addFileFromFS("tagprofile.bin", false);
 	addFileFromFS("norf.bin", true);
 	addFileFromFS("lowbat.bin", true);
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.42.json
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.42.json
@@ -0,0 +1,8 @@
+{
+    "mac":"00000130C8754110",
+    "xRes":400,
+    "yRes":300,
+    "bpp":2,
+    "controllerType":1,
+    "OEPLType":36
+}
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.75.json
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.75.json
@@ -0,0 +1,8 @@
+{
+    "mac":"0000021ECA8C743F",
+    "xRes":640,
+    "yRes":384,
+    "bpp":2,
+    "controllerType":0,
+    "OEPLType":5
+}
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.75BW.json
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.75BW.json
@@ -0,0 +1,8 @@
+{
+    "mac":"000001EF0ED27336",
+    "xRes":640,
+    "yRes":384,
+    "bpp":1,
+    "controllerType":0,
+    "OEPLType":38
+}
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.json
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mkfsOEPL/tagprofile.json
@@ -1,8 +1,8 @@
 {
-    "mac":"0000021ECA8C743F",
+    "mac":"000001EF0ED27336",
    "xRes":640,
    "yRes":384,
-    "bpp":2,
+    "bpp":1,
    "controllerType":0,
-    "OEPLType":5
+    "OEPLType":38
 }
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/gpio.c
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/gpio.c
@@ -23,7 +23,7 @@ void setupWDT() {
    CLK_ModuleClkEnable(CLK_WDT);
    WDT_SetMode(WDT_MODE_RESET);
    WDT_SetResetPulseLen(WDT_RESET_PULSE_LEN_256);
-    WDT_SetTimeoutVal(30);
+    WDT_SetTimeoutVal(0x0B);
    WDT_RestartCounter();
    WDT_Enable();
    //** WATCHDOG
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/mz100_wdt.c
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/mz100_wdt.c
@@ -129,6 +129,7 @@ void WDT_SetMode(WDT_Mode_Type mode)
 void WDT_SetTimeoutVal(uint32_t timeoutVal)
 {
  /* set WDT timeout value */
+  // This value can be anything between 0x00 and 0x0F; this configures the WDT to reset at 2^(16+value) cycles (2^16 - 2^31)
  WDT->TORR.BF.TOP = timeoutVal;
 }
 
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/timer.c
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/timer.c
@@ -58,4 +58,16 @@ void timerDelay(uint64_t cycles)
 	t = timerGet();
 	while (timerGet() - t < cycles)
 		;
+}
+
+uint32_t timerMs(){
+	static uint64_t prev = 0;
+	uint64_t now = timerGet();
+	uint64_t diff = now - prev;
+	prev = now;
+	return (uint32_t)(diff/TIMER_TICKS_PER_MSEC);
+}
+
+uint32_t millis(){
+	return (uint32_t)(timerGet() / TIMER_TICKS_PER_MSEC);
 }
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/timer.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/mz100/timer.h
@@ -9,6 +9,9 @@
 void timerInit(void);
 uint64_t timerGet(void);
 void timerStop(void);
+uint32_t timerMs(void);
+
+uint32_t millis();

 void timerDelay(uint64_t cycles);

--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/oepl-protocol.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/oepl-protocol.cpp
@@ -15,7 +15,7 @@ extern "C" {
 #include "mz100/util.h"
 #include "mz100/mz100_flash.h"
 #include "zigbee.h"
-#include "md5.h"
+#include "../common/md5.h"
 }

 #include "drawing.h"
@@ -31,17 +31,12 @@ extern "C" {
 #define FW88MZ100

 #define HAL_PacketRX commsRxUnenc
-#define millis() timerGet()
-#define HAL_TIMER_TICK TIMER_TICKS_PER_MSEC


 void inline HAL_msDelay(uint32_t t) {
    timerDelay(t * TIMER_TICKS_PER_MSEC);
 }

-void executeCommand(uint8_t c) {
-}
-
 void loadSettingsFromBuffer(uint8_t *buffer) {
 }

@@ -87,4 +82,4 @@ static bool validateEepromMD5(uint64_t ver, uint32_t eepromstart, uint32_t flen)
 #endif
 }

-#include "../common/oepl-protocol.cpp"
+#include "../common/oepl-protocol.cpp"
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/oepl_fs.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/oepl_fs.cpp
@@ -50,7 +50,7 @@ uint32_t OEPLFs::findEntry() {
    uint8_t *scan = (uint8_t *)malloc(1024);
    uint32_t offset = 0;
    // scan flash with some overlap, to ensure the entire string is in the buffer at some point
-    for (uint32_t c = 60000; c < 180000; c += 512) {
+    for (uint32_t c = 64000; c < 180000; c += 512) {
        FLASH_Read(FLASH_FAST_READ_QUAD_OUT, c, scan, 1024);
        uint32_t scan_offset = 0;
        bool nextblock = false;
@@ -80,7 +80,6 @@ uint32_t OEPLFs::findEntry() {
    } else {
        printf("FS: Not found. Did you forget to add it?\n");
        FLASH_Read(FLASH_FAST_READ_QUAD_OUT, 0x109C0, scan, 1024);
-        dump(scan, 1024);
    }
    free(scan);
    return offset;
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/powermgt.c
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/powermgt.c
@@ -1,164 +0,0 @@
-#include "powermgt.h"
-
-#include <stdbool.h>
-#include <stddef.h>
-#include <stdint.h>
-// #include <stdio.h>
-#include <string.h>
-
-#include "epd_interface.h"
-#include "board.h"
-
-
-#include "main.h"
-
-#include "oepl-protocol.h"
-
-#include "settings.h"
-
-extern "C" {
-#include "mz100/eeprom.h"
-#include "mz100/mz100_sleep.h"
-#include "mz100/printf.h"
-#include "screen.h"
-#include "mz100/util.h"
-#include "zigbee.h"
-}
-
-__attribute__((section(".aonshadow"))) uint16_t dataReqAttemptArr[POWER_SAVING_SMOOTHING] = {0};  // Holds the amount of attempts required per data_req/check-in
-__attribute__((section(".aonshadow"))) uint8_t dataReqAttemptArrayIndex = 0;
-__attribute__((section(".aonshadow"))) uint8_t dataReqLastAttempt = 0;
-__attribute__((section(".aonshadow"))) uint16_t nextCheckInFromAP = 0;
-__attribute__((section(".aonshadow"))) uint8_t wakeUpReason = 0;
-__attribute__((section(".aonshadow"))) uint8_t scanAttempts = 0;
-
-__attribute__((section(".aonshadow"))) int8_t temperature = 0;
-__attribute__((section(".aonshadow"))) uint16_t batteryVoltage = 0;
-__attribute__((section(".aonshadow"))) bool lowBattery = false;
-__attribute__((section(".aonshadow"))) uint16_t longDataReqCounter = 0;
-__attribute__((section(".aonshadow"))) uint16_t voltageCheckCounter = 0;
-
-__attribute__((section(".aonshadow"))) uint8_t capabilities = 0;
-
-bool spiActive = false;
-bool uartActive = false;
-bool eepromActive = false;
-bool i2cActive = false;
-
-extern int8_t adcSampleTemperature(void);  // in degrees C
-
-uint8_t checkButtonOrJig() {
-    return DETECT_P1_0_NOTHING;
-}
-
-void setupPortsInitial() {
-}
-
-uint16_t doVoltageReading() {
-    batteryVoltage = (uint16_t)measureBattery();
-    if (batteryVoltage < tagSettings.batLowVoltage) {
-        lowBattery = true;
-    } else {
-        lowBattery = false;
-    }
-    return batteryVoltage;
-}
-
-void initPowerSaving(const uint16_t initialValue) {
-    for (uint8_t c = 0; c < POWER_SAVING_SMOOTHING; c++) {
-        dataReqAttemptArr[c] = initialValue;
-    }
-}
-
-static void configSPI(const bool setup) {
-    spiActive = setup;
-}
-
-static void configUART(const bool setup) {
-    /* if (setup == uartActive)
-         return;
-     uartActive = setup;
-     if (setup)
-         Serial.begin(115200);
-     else
-         Serial.end();*/
-}
-
-static void configEEPROM(const bool setup) {
-}
-
-static void configI2C(const bool setup) {
-}
-
-void powerUp(const uint8_t parts) {
-    // printf("Power up: %d\r\n", parts);
-    if (parts & INIT_RADIO) {
-        radioInit();
-        // radioRxFilterCfg(mSelfMac, 0x10000, PROTO_PAN_ID);
-        // radioSetTxPower(10);
-        if (currentChannel >= 11 && currentChannel <= 27) {
-            radioSetChannel(currentChannel);
-        } else {
-            radioSetChannel(RADIO_FIRST_CHANNEL);
-        }
-    }
-    if (parts & INIT_UART) {
-        configUART(true);
-    }
-    if (parts & INIT_EPD) {
-        configSPI(true);
-        epdSetup();
-    }
-    if (parts & INIT_EEPROM) {
-        configEEPROM(true);
-    }
-    if (parts & INIT_I2C) {
-        configI2C(true);
-    }
-}
-
-void powerDown(const uint8_t parts) {
-    if(parts & INIT_EPD){
-        epdEnterSleep();
-    }
-    // printf("Power down: %d\r\n", parts);
-}
-
-void doSleep(const uint32_t t) {
-    printf("Sleeping for: %d ms\r\n", t);
-    // sleepForMs(t);
-    delay(t);
-}
-
-uint32_t getNextScanSleep(const bool increment) {
-    if (increment) {
-        if (scanAttempts < 255)
-            scanAttempts++;
-    }
-
-    if (scanAttempts < INTERVAL_1_ATTEMPTS) {
-        return INTERVAL_1_TIME;
-    } else if (scanAttempts < (INTERVAL_1_ATTEMPTS + INTERVAL_2_ATTEMPTS)) {
-        return INTERVAL_2_TIME;
-    } else {
-        return INTERVAL_3_TIME;
-    }
-}
-
-void addAverageValue() {
-    uint16_t curval = INTERVAL_AT_MAX_ATTEMPTS - INTERVAL_BASE;
-    curval *= dataReqLastAttempt;
-    curval /= DATA_REQ_MAX_ATTEMPTS;
-    curval += INTERVAL_BASE;
-    dataReqAttemptArr[dataReqAttemptArrayIndex % POWER_SAVING_SMOOTHING] = curval;
-    dataReqAttemptArrayIndex++;
-}
-
-uint16_t getNextSleep() {
-    uint16_t avg = 0;
-    for (uint8_t c = 0; c < POWER_SAVING_SMOOTHING; c++) {
-        avg += dataReqAttemptArr[c];
-    }
-    avg /= POWER_SAVING_SMOOTHING;
-    return avg;
-}
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/powermgt.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/powermgt.cpp
@@ -11,13 +11,14 @@
 #include "oepl-protocol.h"
 #include "board.h"

-extern "C"{
+extern "C" {
 #include "mz100/eeprom.h"
 #include "mz100/mz100_sleep.h"
 #include "mz100/printf.h"
 #include "screen.h"
 #include "mz100/util.h"
 #include "zigbee.h"
+#include "mz100/timer.h"
 }

 __attribute__((section(".aonshadow"))) uint16_t dataReqAttemptArr[POWER_SAVING_SMOOTHING] = {0};  // Holds the amount of attempts required per data_req/check-in
@@ -113,16 +114,14 @@ void powerUp(const uint8_t parts) {
 }

 void powerDown(const uint8_t parts) {
-    if(parts & INIT_EPD){
+    if (parts & INIT_EPD) {
        epdEnterSleep();
    }
    // printf("Power down: %d\r\n", parts);
 }

 void doSleep(const uint32_t t) {
-    printf("Sleeping for: %d ms\r\n", t);
-    // sleepForMs(t);
-    delay(t);
+    timerDelay(t*TIMER_TICKS_PER_MSEC);
 }

 uint32_t getNextScanSleep(const bool increment) {
@@ -150,6 +149,9 @@ void addAverageValue() {
 }

 uint16_t getNextSleep() {
+#ifdef DEBUG_FAST_CHECK_IN
+    return 20;
+#endif
    uint16_t avg = 0;
    for (uint8_t c = 0; c < POWER_SAVING_SMOOTHING; c++) {
        avg += dataReqAttemptArr[c];
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/powermgt.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/powermgt.h
@@ -27,17 +27,17 @@
 // power saving algorithm
 #define INTERVAL_BASE 40              // interval (in seconds) (when 1 packet is sent/received) for target current (7.2µA)
 #define INTERVAL_AT_MAX_ATTEMPTS 300  // interval (in seconds) (at max attempts) for target average current
-#define DATA_REQ_RX_WINDOW_SIZE 5UL   // How many milliseconds we should wait for a packet during the data_request.
+#define DATA_REQ_RX_WINDOW_SIZE 4UL   // How many milliseconds we should wait for a packet during the data_request.
                                      // If the AP holds a long list of data for tags, it may need a little more time to lookup the mac address
 #define DATA_REQ_MAX_ATTEMPTS 3       // How many attempts (at most) we should do to get something back from the AP
 #define POWER_SAVING_SMOOTHING 8      // How many samples we should use to smooth the data request interval
 #define MINIMUM_INTERVAL 45           // IMPORTANT: Minimum interval for check-in; this determines overal battery life!
 #define MAXIMUM_PING_ATTEMPTS 3       // How many attempts to discover an AP the tag should do
-#define PING_REPLY_WINDOW 5UL
+#define PING_REPLY_WINDOW 10UL

 #define LONG_DATAREQ_INTERVAL 300     // How often (in seconds, approximately) the tag should do a long datareq (including temperature)
 #define VOLTAGE_CHECK_INTERVAL 288    // How often the tag should do a battery voltage check (multiplied by LONG_DATAREQ_INTERVAL)
-#define BATTERY_VOLTAGE_MINIMUM 2950  // 2900 or below is the best we can do on the EPD
+#define BATTERY_VOLTAGE_MINIMUM 2900  // 2900 or below is the best we can do on the EPD

 // power saving when no AP's were found (scanning every X)
 #define VOLTAGEREADING_DURING_SCAN_INTERVAL 2  // how often we should read voltages; this is done every scan attempt in interval bracket 3
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/settings.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/settings.h
@@ -3,29 +3,25 @@

 #include <stdint.h>

-#define FW_VERSION 0x0027          // version number (max 2.5.5 :) )
-#define FW_VERSION_SUFFIX "-zlib"  // suffix, like -RC1 or whatever.
+#define FW_VERSION 0x0028          // version number (max 2.5.5 :) )
+#define FW_VERSION_SUFFIX "-cmds"  // suffix, like -RC1 or whatever.

+// #define DEBUGBLOCKS                 // uncomment to enable extra debug information on the block transfers
+// #define PRINT_LUT                   // uncomment if you want the tag to print the LUT for the current temperature bracket

-//#define DEBUGBLOCKS                 // uncomment to enable extra debug information on the block transfers
-//#define PRINT_LUT                   // uncomment if you want the tag to print the LUT for the current temperature bracket
+// #define DEBUG_EPD
+// #define DEBUG_FS
+// #define DEBUG_COMPRESSION
+// #define DEBUG_PROTO
+// #define DEBUG_SETTINGS
+// #define DEBUG_MAIN
+// #define DEBUG_FAST_CHECK_IN
+// #define DEBUG_DONTVALIDATEPROTO

-//#define DEBUG_EPD
-//#define DEBUG_FS
-
-//#define DEBUG_COMPRESSION
-//#define DEBUG_PROTO
-//#define DEBUG_SETTINGS
-//#define DEBUG_DONTVALIDATEPROTO
-
-
-
-#if defined(DEBUG_SETTINGS) || defined(DEBUG_EPD) || defined(DEBUGBLOCKS) || defined(DEBUG_PROTO) || defined(DEBUG_COMPRESSION) || defined(DEBUG_FS)
+#if defined(DEBUG_SETTINGS) || defined(DEBUG_EPD) || defined(DEBUGBLOCKS) || defined(DEBUG_PROTO) || defined(DEBUG_COMPRESSION) || defined(DEBUG_FS) || defined(DEBUG_MAIN) || defined(DEBUG_FAST_CHECK_IN)
 #define DEBUG_BUILD
 #endif

-
-
 #define SETTINGS_STRUCT_VERSION 0x01

 #define DEFAULT_SETTING_FASTBOOT 0
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8159-var-m2.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8159-var-m2.cpp
@@ -14,11 +14,14 @@ extern "C" {
 #include "mz100/mz100_pinmux.h"
 #include "mz100/printf.h"
 #include "mz100/util.h"
+#include "mz100/timer.h"
 }

 #include "drawing.h"
 #include "epd_interface.h"

+#include "settings.h"
+
 #define EPD_PANEL_SETTING 0x00
 #define EPD_POWER_SETTING 0x01
 #define EPD_POWER_OFF 0x02
@@ -122,39 +125,63 @@ struct __attribute__((packed)) epd_xonlut {
 void uc8159::epdSetup() {
 #ifdef DEBUG_EPD
    printf("EPD: Init begin\n");
+    timerMs();
 #endif
+    // printf("Start=%lu\n", timerMs());
    initEPDGPIO();
    this->epdReset();
+    eepromWake();
    epdWrite(EPD_POWER_ON, 0);
-    busyWaitUntil(EPD_IS_NOT_BUSY, 100);
-
-    epdWrite(EPD_TRES, 0x04, 2, 128, 1, 128);
-
-    // wake the eeprom
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0x01);
-    GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_LOW);
-    epdWrite(EPD_WAKE_EEPROM, 0x00);
-    GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_HIGH);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0x00);
-
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);
    epdWrite(EPD_POWER_SETTING, 4, 0x37, 0x00, 0x05, 0x05);  // 0x37 - 00- 05 05 this one worked
-
+    busyWaitUntil(EPD_IS_BUSY, 50);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);
    epdWrite(EPD_PANEL_SETTING, 2, 0xC3, 0x08);  // 0xC3-0x88 // lut from EEPROM
+    epdWrite(EPD_UNKNOWN_1, 1, 0x03);            // load lut, probably
+    epdWrite(0xE3, 1, 0xFF);                     // max power save
    epdWrite(EPD_POWER_OFF_SEQUENCE, 1, 0x00);
-    epdWrite(EPD_BOOSTER_SOFT_START, 0x03, 199, 204, 45);
-    epdWrite(EPD_PLL_CONTROL, 0x01, 60);
-    epdWrite(EPD_TEMP_SELECT, 0x01, 0x00);
-    epdWrite(EPD_VCOM_DATA_INTERVAL, 0x01, 119);
-    epdWrite(EPD_TCON_SET, 0x01, 34);
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x2D); // stock  - 11 000 111 / 11 001 100 / 00 101 101
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0x17, 0x17, 0x17); //- default   -  00 010 111
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0x07, 0x0C, 0x2D); - no noticable difference
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0x0F, 0x0F, 0x0F);  // 00 001 111
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x25);  // end: 00 100 101 - works, good greys/no shadow
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x1C);  // end: 00 011 101 - works!
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x15);  // end: 00 010 101 - works too! Used this one!!!!!
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x0D); // end: 00 001 101 - still works!
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x05); // end: 00 000 101 - not enough
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0x17, 0x17, 0x1C);  // ?
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x2D); // stock  - 11 000 111 / 11 001 100 / 00 101 101
+
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xD7, 0xDC, 0x15); // 11 000 111 / 11 001 100 // okay shadowing
+
+    epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x26);  // end: 00 100 110 - max 38mA?
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x25);  // end: 00 100 101 - works, good greys/no shadows, 60mA
+    // epdWrite(EPD_BOOSTER_SOFT_START, 3, 0xC7, 0xCC, 0x28); // end 00 101 000 - max 170mA
+
+    epdWrite(EPD_PLL_CONTROL, 1, 0x3C);
+    epdWrite(EPD_TEMP_SELECT, 1, 0x00);
+    epdWrite(EPD_VCOM_DATA_INTERVAL, 1, 0x77);
+    // epdWrite(EPD_VCOM_DATA_INTERVAL, 1, 0x70);
+
+    epdWrite(EPD_TCON_SET, 1, 0x22);
+
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);
+
+    epdWrite(EPD_TRES, 4, 2, 128, 1, 128);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);

    EPDtempBracket = this->getTempBracket();
-    this->loadFrameRatePLL(EPDtempBracket);
-    this->loadTempVCOMDC(EPDtempBracket);
+    this->loadTempVCOMDC();
+    epdWrite(EPD_POWER_OFF, 0);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);
+
+    epdWrite(EPD_POWER_ON, 0);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);
+
+    this->loadFrameRatePLL();

-// this->loadTempVSH(EPDtempBracket);
-// epdWrite(EPD_POWER_SETTING, 4, 0x37, 0x00, this->vshc, this->vslc); // this doesn't work
 #ifdef DEBUG_EPD
-    printf("EPD: Init complete\n");
+    printf("EPD: Init complete (%lu ms)\n", timerMs());
 #endif
 }

@@ -170,12 +197,10 @@ uint8_t uc8159::getTempBracket() {
    uint8_t v1;
    uint8_t temptable[40];

-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0x01);
    eepromReadBlock(0, 25002, temptable, 10);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0x00);

    epdWrite(EPD_TEMP_CALIB, 0);
-    busyWaitUntil(EPD_IS_NOT_BUSY, 10);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 200);
    v0 = softSPIReadByte();
    v1 = (uint8_t)(2 * v0) + ((uint8_t)softSPIReadByte() >> 7);

@@ -191,44 +216,35 @@ uint8_t uc8159::getTempBracket() {
 #endif
    return bracket;
 }
-void uc8159::loadFrameRatePLL(uint8_t bracket) {
+void uc8159::loadFrameRatePLL() {
    uint8_t pllvalue;
    uint8_t plltable[12];
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0x01);
    eepromReadBlock(0, 25039, plltable, 10);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0x00);
-    pllvalue = plltable[bracket];
+    pllvalue = plltable[EPDtempBracket];
 #ifdef DEBUG_EPD
-    printf("loading pll value 0x%02X\n", pllvalue);
+    printf("EPD: loading pll value 0x%02X\n", pllvalue);
 #endif
-    // pllvalue = 0x3A;  // was 0x3C
    epdWrite(EPD_PLL_CONTROL, 1, pllvalue);
 }
-void uc8159::loadTempVCOMDC(uint8_t bracket) {
+void uc8159::loadTempVCOMDC() {
    uint8_t vcomvalue;
    uint8_t vcomtable[12];
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 1);
    eepromReadBlock(0, 25049, vcomtable, 10);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0);
-    vcomvalue = vcomtable[bracket];
+    vcomvalue = vcomtable[EPDtempBracket];
+#ifdef DEBUG_EPD
+    printf("EPD: loading vcomvalue value 0x%02X\n", vcomvalue);
+#endif
    epdWrite(EPD_VCOM_DC_SET, 1, vcomvalue);
 }
-void uc8159::loadTempVSH(uint8_t bracket) {
-    uint8_t vshtable[20];
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 1);
-    eepromReadBlock(0, 25011, vshtable, 20);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0);
-    this->vshc = vshtable[bracket * 2];
-    this->vslc = vshtable[(bracket * 2) + 1];
-}
-uint8_t *uc8159::loadLUT(uint8_t index, uint8_t bracket) {
+
+uint8_t *uc8159::loadLUT(uint8_t index) {
    uint16_t adr = 0;
    uint16_t len = 0;
    uint8_t *lutBuffer;
    switch (index) {
        case EPD_LUT_VCOM:
            // VCOM LUT
-            adr = 20800 + (220 * bracket);
+            adr = 20800 + (220 * EPDtempBracket);
            len = 220;
            break;
        case EPD_LUT_B:
@@ -239,21 +255,19 @@ uint8_t *uc8159::loadLUT(uint8_t index, uint8_t bracket) {
        case EPD_LUT_R1:
        case EPD_LUT_R2:
        case EPD_LUT_R3:
-            adr = (bracket * 2080);
+            adr = (EPDtempBracket * 2080);
            adr += (index - 0x21) * 260;
            len = 260;
            break;
        case EPD_LUT_XON:
            // XON LUT
-            adr = 23000 + (200 * bracket);
+            adr = 23000 + (200 * EPDtempBracket);
            len = 200;
            break;
    }

-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 1);
    lutBuffer = (uint8_t *)malloc(len);
    if (lutBuffer) eepromReadBlock(0, adr, lutBuffer, len);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0);
    return lutBuffer;
 }

@@ -275,10 +289,10 @@ void xonLutSkip(struct epd_xonlut *colorlut, uint8_t skip) {
    }
 }

-void uc8159::loadLUTSfromEEPROM(uint8_t bracket, bool doRed) {
+void uc8159::loadLUTSfromEEPROM(bool doRed) {
    doRed = false;
    for (uint8_t c = EPD_LUT_B; c <= EPD_LUT_R3; c++) {
-        struct epd_colorlut *colorlut = (struct epd_colorlut *)loadLUT(c, bracket);
+        struct epd_colorlut *colorlut = (struct epd_colorlut *)loadLUT(c);

        colorLutSkip(colorlut, 0);
        colorLutSkip(colorlut, 0);
@@ -289,6 +303,7 @@ void uc8159::loadLUTSfromEEPROM(uint8_t bracket, bool doRed) {
            colorLutSkip(colorlut, 2);
            colorLutSkip(colorlut, 2);
            colorLutSkip(colorlut, 2);
+            colorLutSkip(colorlut, 2);
        }

        // colorLutSkip(colorlut, 3);
@@ -297,7 +312,7 @@ void uc8159::loadLUTSfromEEPROM(uint8_t bracket, bool doRed) {
        if (colorlut) free(colorlut);
    }

-    struct epd_vcomlut *vcomlut = (struct epd_vcomlut *)loadLUT(EPD_LUT_VCOM, bracket);
+    struct epd_vcomlut *vcomlut = (struct epd_vcomlut *)loadLUT(EPD_LUT_VCOM);
    vcomLutSkip(vcomlut, 0);
    vcomLutSkip(vcomlut, 0);
    vcomlut->part[0].repeat = 1;
@@ -308,11 +323,12 @@ void uc8159::loadLUTSfromEEPROM(uint8_t bracket, bool doRed) {
        vcomLutSkip(vcomlut, 2);
        vcomLutSkip(vcomlut, 2);
        vcomLutSkip(vcomlut, 2);
+        vcomLutSkip(vcomlut, 2);
    }
    epdBlockWrite(EPD_LUT_VCOM, (uint8_t *)vcomlut, 220);
    if (vcomlut) free(vcomlut);

-    struct epd_xonlut *xonlut = (struct epd_xonlut *)loadLUT(EPD_LUT_XON, bracket);
+    struct epd_xonlut *xonlut = (struct epd_xonlut *)loadLUT(EPD_LUT_XON);

    xonLutSkip(xonlut, 0);
    xonLutSkip(xonlut, 0);
@@ -323,38 +339,32 @@ void uc8159::loadLUTSfromEEPROM(uint8_t bracket, bool doRed) {
        xonLutSkip(xonlut, 2);
        xonLutSkip(xonlut, 2);
        xonLutSkip(xonlut, 2);
+        xonLutSkip(xonlut, 2);
    }
    epdBlockWrite(EPD_LUT_XON, (uint8_t *)xonlut, 200);
    if (xonlut) free(xonlut);
 }
 void uc8159::epdReset() {
-    uint8_t v0 = 5;
 #ifdef DEBUG_EPD
-    printf("EPD: Reset... ");
+    printf("EPD: Reset\n");
 #endif
-    while (1) {
+    uint8_t attempt = 0;
+    while (attempt < 5) {
        GPIO_WritePinOutput(EPD_RESET, GPIO_IO_HIGH);
        delay(100);
        GPIO_WritePinOutput(EPD_RESET, GPIO_IO_LOW);
-        delay(3000);
+        delay(30 + (750 * attempt));
        GPIO_WritePinOutput(EPD_RESET, GPIO_IO_HIGH);
-        delay(3000);
+        busyWaitUntil(EPD_IS_NOT_BUSY, 500);
+        delay(600);
        if (GPIO_ReadPinLevel(EPD_BUSY))
            break;
-        v0--;
-        if (!v0) {
-            printf(" - EPD reset failure!\r\n");
-            break;
-        }
+        printf("EPD: Reset attempt %d\n", attempt + 1);
    }
-    delay(5000);
-#ifdef DEBUG_EPD
-    printf("complete.\n");
-#endif
 }

 void uc8159::eepromReadBlock(char a1, uint16_t readaddress, uint8_t *target, uint16_t length) {
-    GPIO_WritePinOutput(EPD_CS, GPIO_IO_HIGH);
+    eepromSelect(true);
    GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_LOW);
    softSPIWriteByte(3);
    softSPIWriteByte(a1);
@@ -372,7 +382,6 @@ void uc8159::eepromReadBlock(char a1, uint16_t readaddress, uint8_t *target, uin
                readbyte |= 1u;
            GPIO_WritePinOutput(EPD_CLK, GPIO_IO_HIGH);
            delay_us(1);
-            delay(1);
            loopCount++;
        } while (loopCount < 8);
        delay_us(1);
@@ -380,8 +389,29 @@ void uc8159::eepromReadBlock(char a1, uint16_t readaddress, uint8_t *target, uin
    }

    GPIO_WritePinOutput(EPD_CLK, GPIO_IO_LOW);
-    GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_HIGH);
-    delay(1);
+    eepromSelect(false);
+}
+void uc8159::eepromSelect(bool select) {
+    if (select) {
+        epdWrite(EPD_SPI_FLASH_CONTROL, 1, 1);
+        GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_LOW);
+    } else {
+        GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_HIGH);
+        epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0);
+    }
+    delay(100);
+}
+
+void uc8159::eepromWake() {
+    eepromSelect(true);
+    softSPIWriteByte(EPD_WAKE_EEPROM);
+    eepromSelect(false);
+}
+
+void uc8159::eepromSleep() {
+    eepromSelect(true);
+    softSPIWriteByte(EPD_EEPROM_SLEEP);
+    eepromSelect(false);
 }

 void uc8159::interleaveColorToBuffer(uint8_t *dst, uint8_t b, uint8_t r) {
@@ -411,12 +441,11 @@ void uc8159::interleaveColorToBuffer(uint8_t *dst, uint8_t b, uint8_t r) {
 }

 void uc8159::epdWriteDisplayData() {
-    uint8_t blocksize = 32;
+    uint8_t blocksize = 64;  // how many rows of pixels will be rendered in one go. Increasing this will increase rendering speed for compressed BWR images, but will use more RAM
    uint16_t byteWidth = this->effectiveXRes / 8;
    uint8_t screenrow_bw[byteWidth * blocksize];
    uint8_t screenrow_r[byteWidth * blocksize];
    uint8_t screenrowInterleaved[byteWidth * 4];
-    // setDisplayWindow(0, 0, 640, 384);
    epdWrite(EPD_START_DATA, 0);
    enableHardSPI(true);
    GPIO_WritePinOutput(EPD_CS, GPIO_IO_LOW);
@@ -429,11 +458,15 @@ void uc8159::epdWriteDisplayData() {
            drawItem::renderDrawLine(screenrow_bw + (byteWidth * bcount), curY + bcount, 0);
        }
        for (uint8_t bcount = 0; bcount < blocksize; bcount++) {
-            if (this->bpp == 1) {
-                drawItem::renderDrawLine(screenrow_bw + (byteWidth * bcount), curY + bcount, 1);
-            } else {
-                drawItem::renderDrawLine(screenrow_r + (byteWidth * bcount), curY + bcount, 1);
+            drawItem::renderDrawLine(screenrow_r + (byteWidth * bcount), curY + bcount, 1);
+        }
+
+        // the BW tags need to map Red onto the black buffer
+        if (this->bpp == 1) {
+            for (uint16_t i = 0; i < (byteWidth * blocksize); i++) {
+                screenrow_bw[i] |= screenrow_r[i];
            }
+            memset(screenrow_r, 0, byteWidth * blocksize);
        }

        for (uint8_t bcount = 0; bcount < blocksize; bcount++) {
@@ -445,7 +478,7 @@ void uc8159::epdWriteDisplayData() {
    }
    GPIO_WritePinOutput(EPD_CS, GPIO_IO_HIGH);
    enableHardSPI(false);
-
+    // get rid of the drawItem list
    drawItem::flushDrawItems();
 }

@@ -455,31 +488,37 @@ void uc8159::draw() {
 }

 void uc8159::drawNoWait() {
+#ifdef DEBUG_EPD
+    timerMs();
+#endif
    epdWriteDisplayData();
+    if (this->bpp == 1) drawLut = 0;
+
+#ifdef DEBUG_EPD
+    printf("EPD: Rendering took %lu ms\n", timerMs());
+#endif
+
    if (drawLut) {
-        // epdWrite(EPD_PLL_CONTROL, 1, 0x3A); // scan the gates a little faster
        epdWrite(EPD_PANEL_SETTING, 2, 0xC3, 0x88);  // 0xC3-0x88 // lut from register
        bool doReds = true;
        if (drawLut == 2) doReds = false;
-        loadLUTSfromEEPROM(EPDtempBracket, doReds);
+        loadLUTSfromEEPROM(doReds);
+        epdWrite(EPD_PLL_CONTROL, 1, 0x3A);  // 0x29 turbo turbo
    } else {
        epdWrite(EPD_PANEL_SETTING, 2, 0xC3, 0x08);  // 0xC3-0x88 // lut from EEPROM
        epdWrite(EPD_UNKNOWN_1, 1, 0x03);            // load lut, probably
-        busyWaitUntil(EPD_IS_BUSY, 10);
-        busyWaitUntil(!EPD_IS_BUSY, 100);
    }
 #ifdef DEBUG_EPD
    printf("EPD: Draw start\n");
 #endif
    wdt10s();
    epdWrite(EPD_REFRESH, 0);
-    busyWaitUntil(EPD_IS_BUSY, 10);
+    busyWaitUntil(EPD_IS_BUSY, 500);
 }

 void uc8159::epdWaitRdy() {
-    delay(15000);
    do_sleeped_epd_refresh();
-    // busyWaitUntil(!EPD_IS_BUSY, 300000);
+    // busyWaitUntil(!EPD_IS_BUSY, 40000);
 #ifdef DEBUG_EPD
    printf("EPD: Draw done!\n");
 #endif
@@ -488,15 +527,12 @@ void uc8159::epdWaitRdy() {
 void uc8159::epdEnterSleep() {
    initEPDGPIO();
    this->epdReset();
+    eepromSleep();
    epdWrite(EPD_POWER_SETTING, 4, 0x02, 0x00, 0x00, 0x00);
-    delay_us(50000);
+    delay_us(10000);
    epdWrite(EPD_POWER_OFF, 0);
-    delay_us(100000);
-    busyWaitUntil(EPD_IS_NOT_BUSY, 100000);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 1);
-    GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_LOW);
-    softSPIWriteByte(EPD_EEPROM_SLEEP);
-    GPIO_WritePinOutput(EPD_HLT_CTRL, GPIO_IO_HIGH);
-    epdWrite(EPD_SPI_FLASH_CONTROL, 1, 0);
+    delay_us(10000);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 1000);
+
    epdWrite(EPD_DEEP_SLEEP, 1, 0xA5);
 }
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8159-var-m2.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8159-var-m2.h
@@ -22,12 +22,14 @@ class uc8159 : public epdInterface {
    void epdWriteDisplayData();
    void interleaveColorToBuffer(uint8_t *dst, uint8_t b, uint8_t r);
    void eepromReadBlock(char a1, uint16_t readaddress, uint8_t *target, uint16_t length);
+    void eepromSelect(bool select);
+    void eepromWake();
+    void eepromSleep();
    void epdReset();
-    void loadLUTSfromEEPROM(uint8_t bracket, bool doRed);
-    uint8_t *loadLUT(uint8_t index, uint8_t bracket);
-    void loadTempVSH(uint8_t bracket);
-    void loadTempVCOMDC(uint8_t bracket);
-    void loadFrameRatePLL(uint8_t bracket);
+    void loadLUTSfromEEPROM(bool doRed);
+    uint8_t *loadLUT(uint8_t index);
+    void loadTempVCOMDC();
+    void loadFrameRatePLL();
    uint8_t getTempBracket();
    uint8_t EPDtempBracket = 0;
    uint8_t vshc;
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8176-var-m2.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8176-var-m2.cpp
@@ -0,0 +1,197 @@
+#include "main.h"
+
+#include "uc8176-var-m2.h"
+
+extern "C" {
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "mz100/gpio.h"
+#include "mz100/mz100_gpio.h"
+#include "mz100/mz100_pinmux.h"
+#include "mz100/printf.h"
+#include "mz100/util.h"
+}
+
+#include "settings.h"
+#include "drawing.h"
+#include "epd_interface.h"
+
+#define EPD_PANEL_SETTING 0x00
+#define EPD_POWER_SETTING 0x01
+#define EPD_POWER_OFF 0x02
+#define EPD_POWER_OFF_SEQUENCE 0x03
+#define EPD_POWER_ON 0x04
+#define EPD_BOOSTER_SOFT_START 0x06
+#define EPD_DEEP_SLEEP 0x07
+#define EPD_START_DTM1 0x10
+#define EPD_DATA_STOP 0x11
+#define EPD_REFRESH 0x12
+#define EPD_START_DTM2 0x13
+#define EPD_LUT_VCOM 0x20
+#define EPD_LUT_B 0x21
+#define EPD_LUT_W 0x22
+#define EPD_LUT_G1 0x23
+#define EPD_LUT_G2 0x24
+#define EPD_LUT_R0 0x25
+#define EPD_LUT_R1 0x26
+#define EPD_LUT_R2 0x27
+#define EPD_LUT_R3 0x28
+#define EPD_LUT_XON 0x29
+#define EPD_PLL_CONTROL 0x30
+#define EPD_TEMP_CALIB 0x40
+#define EPD_TEMP_SELECT 0x41
+#define EPD_TEMP_WRITE 0x42
+#define EPD_TEMP_READ 0x43
+#define EPD_VCOM_DATA_INTERVAL 0x50
+#define EPD_LPD 0x51
+#define EPD_TCON_SET 0x60
+#define EPD_TRES 0x61
+#define EPD_SPI_FLASH_CONTROL 0x65
+#define EPD_REVISION 0x70
+#define EPD_GET_STATUS 0x71
+#define EPD_AUTOMEASURE_VCOM 0x80
+#define EPD_READ_VCOM 0x81
+#define EPD_VCOM_DC_SET 0x82
+#define EPD_SET_WINDOW 0x90
+
+#define EPD_WAKE_EEPROM 0xAB
+#define EPD_EEPROM_SLEEP 0xB9
+#define EPD_UNKNOWN_1 0xE5
+
+#define EPD_IS_BUSY false
+#define EPD_IS_NOT_BUSY true
+
+extern "C" {
+extern void dump(const uint8_t *a, const uint16_t l);
+}
+
+void uc8176::epdSetup() {
+#ifdef DEBUG_EPD
+    printf("EPD: Init begin\n");
+#endif
+    initEPDGPIO();
+    this->epdReset();
+    epdWrite(0x01, 2, 0x03, 0x00);
+    epdWrite(0x06, 3, 0x17, 0x17, 0x17);
+    //epdWrite(0x30, 1, 0x39);  // 4hz Framerate < no setup for this in stock
+    epdWrite(0x60,1, 0x11); // tcon non-overlap
+    epdWrite(EPD_POWER_ON, 0);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 100);
+    delay(10000);
+    epdWrite(0x61, 4, 0x01, 0x90, 0x01, 0x2C);
+    epdWrite(0x50, 1, 0x87);  // 0x87 correct for polarity and border -  0x8C = 5 interval
+    epdWrite(0x00, 1, 0x0F);  // was 0x07
+    epdWrite(0x41, 1, 0x0F);
+    epdWrite(0x40, 0);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 10000);
+    delay(1000);
+
+#ifdef DEBUG_EPD
+    printf("EPD: Init complete\n");
+#endif
+}
+
+void uc8176::selectLUT(uint8_t lut) {
+    this->drawLut = lut;
+}
+
+uc8176::~uc8176() {
+}
+
+void uc8176::epdReset() {
+    uint8_t v0 = 5;
+#ifdef DEBUG_EPD
+    printf("EPD: Reset... ");
+#endif
+    while (1) {
+        GPIO_WritePinOutput(EPD_RESET, GPIO_IO_HIGH);
+        delay(100);
+        GPIO_WritePinOutput(EPD_RESET, GPIO_IO_LOW);
+        delay(3000);
+        GPIO_WritePinOutput(EPD_RESET, GPIO_IO_HIGH);
+        delay(3000);
+        if (GPIO_ReadPinLevel(EPD_BUSY))
+            break;
+        v0--;
+        if (!v0) {
+            printf(" - EPD reset failure!\r\n");
+            break;
+        }
+    }
+    delay(5000);
+#ifdef DEBUG_EPD
+    printf("complete.\n");
+#endif
+}
+
+void uc8176::epdWriteDisplayData() {
+    uint16_t byteWidth = this->effectiveXRes / 8;
+    uint8_t screenrow[byteWidth];
+
+    epdWrite(EPD_START_DTM1, 0);
+    enableHardSPI(true);
+    GPIO_WritePinOutput(EPD_CS, GPIO_IO_LOW);
+    for (uint16_t curY = 0; curY < this->effectiveYRes; curY += 1) {  //
+        memset(screenrow, 0, byteWidth);
+        drawItem::renderDrawLine(screenrow, curY, 0);
+        epdBlockWrite(screenrow, byteWidth);
+    }
+    GPIO_WritePinOutput(EPD_CS, GPIO_IO_HIGH);
+    enableHardSPI(false);
+
+    epdWrite(EPD_START_DTM2, 0);
+    enableHardSPI(true);
+    GPIO_WritePinOutput(EPD_CS, GPIO_IO_LOW);
+    for (uint16_t curY = 0; curY < this->effectiveYRes; curY += 1) {  //
+        memset(screenrow, 0, byteWidth);
+        drawItem::renderDrawLine(screenrow, curY, 1);
+        epdBlockWrite(screenrow, byteWidth);
+    }
+    GPIO_WritePinOutput(EPD_CS, GPIO_IO_HIGH);
+    enableHardSPI(false);
+
+    drawItem::flushDrawItems();
+}
+
+void uc8176::draw() {
+    this->drawNoWait();
+    this->epdWaitRdy();
+}
+
+void uc8176::drawNoWait() {
+#ifdef DEBUG_EPD
+    printf("EPD: Draw start\n");
+#endif
+    epdWriteDisplayData();
+
+    wdt10s();
+#ifdef DEBUG_EPD
+    printf("EPD: Refresh start\n");
+#endif
+    epdWrite(EPD_REFRESH, 0);
+    busyWaitUntil(EPD_IS_BUSY, 10);
+}
+
+void uc8176::epdWaitRdy() {
+    delay(15000);
+    do_sleeped_epd_refresh();
+    //   delay(150000);
+    // busyWaitUntil(!EPD_IS_BUSY, 300000);
+#ifdef DEBUG_EPD
+    printf("EPD: Draw done!\n");
+#endif
+    delay(1000);
+}
+
+void uc8176::epdEnterSleep() {
+    initEPDGPIO();
+    this->epdReset();
+    epdWrite(EPD_POWER_OFF, 0);
+    delay_us(100000);
+    busyWaitUntil(EPD_IS_NOT_BUSY, 100000);
+    epdWrite(EPD_DEEP_SLEEP, 1, 0xA5);
+}
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8176-var-m2.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/uc8176-var-m2.h
@@ -0,0 +1,23 @@
+#pragma once
+// #include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdbool.h>
+
+#include "epd_interface.h"
+
+class uc8176 : public epdInterface {
+   public:
+    ~uc8176();
+    void epdSetup();
+    void epdEnterSleep();
+    void draw();
+    void drawNoWait();
+    void epdWaitRdy();
+    void selectLUT(uint8_t lut);
+
+   protected:
+    uint8_t drawLut;
+    void epdWriteDisplayData();
+    void epdReset();
+};
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/userinterface.cpp
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/userinterface.cpp
@@ -3,7 +3,6 @@
 #include <stdbool.h>
 #include <string.h>

-#include "bitmaps.h"
 #include "board.h"
 #include "comms.h"
 #include "epd_interface.h"
@@ -22,12 +21,12 @@ const char fwVersionSuffix[] = FW_VERSION_SUFFIX;

 extern uint8_t capabilities;

-bool __attribute__((section(".aonshadow"))) lowBatteryShown = false;
-bool __attribute__((section(".aonshadow"))) noAPShown = false;
+bool __attribute__((section(".aonshadow"))) lowBatteryShown;
+bool __attribute__((section(".aonshadow"))) noAPShown;

 void addOverlay() {
    if ((currentChannel == 0) && (tagSettings.enableNoRFSymbol)) {
-        // drawImg(0, 3, norf);
+        fs->init();
        drawMask((epd->Xres - 48) - 5, 8, 48, 42, COLOR_BLACK);
        drawMask((epd->Xres - 48) - 5, 8, 48, 42, COLOR_RED);
        addCompressedFSImage((epd->Xres - 48) - 5, 8, rotation::ROTATE_0, (char *)"norf.bin.z");
@@ -35,7 +34,9 @@ void addOverlay() {
    } else {
        noAPShown = false;
    }
-    if ((batteryVoltage < tagSettings.batLowVoltage) && (tagSettings.enableLowBatSymbol)) {
+
+    if ((lowBattery) && (tagSettings.enableLowBatSymbol)) {
+        fs->init();
        drawMask((epd->Xres - 48) - 5, (epd->Yres - 26) - 7, 48, 26, COLOR_BLACK);
        drawMask((epd->Xres - 48) - 5, (epd->Yres - 26) - 7, 48, 26, COLOR_RED);
        addCompressedFSImage((epd->Xres - 48) - 5, (epd->Yres - 26) - 7, rotation::ROTATE_0, (char *)"lowbat.bin.z");
@@ -43,6 +44,7 @@ void addOverlay() {
    } else {
        lowBatteryShown = false;
    }
+
 #ifdef DEBUG_BUILD
    fs->init();
    fontrender fr((char *)"font/FreeSansBold18pt7b");
@@ -72,10 +74,16 @@ void showSplashScreen() {
    fontrender fr((char *)"font/FreeSansBold24pt7b");
    fr.epdPrintf(5, 5, 0, rotation::ROTATE_0, (char *)"OpenEPaperLink");
    fr.setFont((char *)"font/FreeSansBold18pt7b");
-    fr.epdPrintf(20, 70, 1, rotation::ROTATE_0, "M2 7.5\"");
+
+    if (tagProfile.bpp == 2) {
+        fr.epdPrintf(15, 70, 1, rotation::ROTATE_0, "M2 7.5\" BWR");
+    } else {
+        fr.epdPrintf(20, 70, 1, rotation::ROTATE_0, "M2 7.5\" BW");
+    }
    fr.epdPrintf(10, 350, 0, rotation::ROTATE_0, "Tag MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
    addQR(80, 160, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
-
+    fr.setFont((char *)"font/FreeSans9pt7b");
+    fr.epdPrintf(622, 280, 0, rotation::ROTATE_270, "v%04X%s", FW_VERSION, FW_VERSION_SUFFIX);
    selectLUT(1);
    draw();
    epdEnterSleep();
@@ -108,7 +116,10 @@ void showAPFound() {
    fr.epdPrintf(20, 110, 0, rotation::ROTATE_0, "AP MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", APmac[7], APmac[6], APmac[5], APmac[4], APmac[3], APmac[2], APmac[1], APmac[0]);
    fr.epdPrintf(10, 315, 0, rotation::ROTATE_0, "Battery: %d.%dV", batteryVoltage / 1000, batteryVoltage % 1000);
    fr.epdPrintf(10, 350, 0, rotation::ROTATE_0, "Tag MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+    fr.setFont((char *)"font/FreeSans9pt7b");
+    fr.epdPrintf(622, 280, 0, rotation::ROTATE_270, "v%04X%s", FW_VERSION, FW_VERSION_SUFFIX);
    addOverlay();
+
    if (lowBatteryShown) {
        selectLUT(0);
    } else {
@@ -140,16 +151,12 @@ void showNoAP() {
 }

 void showLongTermSleep() {
-    // selectLUT(EPD_LUT_NO_REPEATS);
-    // clearScreen();
-
-    // epdPrintBegin(2, SCREEN_HEIGHT - 16, EPD_DIRECTION_X, EPD_SIZE_SINGLE, EPD_COLOR_BLACK);
-    // epdpr("zZ");
-    // epdPrintEnd();
-
-    addOverlay();
-    // drawWithSleep();
+    epdSetup();
+    selectLUT(0);
+    draw();
+    epdEnterSleep();
 }
+
 void showNoEEPROM() {
    // selectLUT(EPD_LUT_NO_REPEATS);
    // clearScreen();
--- a/ARM_Tag_FW/Newton_M3_nRF52811/Newton_M3_Universal-full-flash.bin
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/Newton_M3_Universal-full-flash.bin
--- a/ARM_Tag_FW/Newton_M3_nRF52811/Newton_M3_Universal-full-flash.hex
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/Newton_M3_Universal-full-flash.hex
--- a/ARM_Tag_FW/Newton_M3_nRF52811/Newton_M3_Universal-ota.bin
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/Newton_M3_Universal-ota.bin
--- a/ARM_Tag_FW/Newton_M3_nRF52811/hal/Newton_M3_nRF52811/HAL_Newton_M3.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/hal/Newton_M3_nRF52811/HAL_Newton_M3.cpp
@@ -134,7 +134,7 @@ void getTemperature() {

    temperature = (uint8_t)(temp / 100);

-    printf("temp = %lu.%lu\n", temp / 100, temp % 100);
+    //printf("temp = %lu.%lu\n", temp / 100, temp % 100);
 }

 void boardGetOwnMac(uint8_t *mac) {
--- a/ARM_Tag_FW/Newton_M3_nRF52811/hal/Newton_M3_nRF52811/HAL_Newton_M3.h
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/hal/Newton_M3_nRF52811/HAL_Newton_M3.h
@@ -105,6 +105,7 @@ struct tagSpecs {
    uint8_t buttonCount = 0;
    bool hasNFC = false;
    bool hasLED = false;
+    bool hasThirdColor = false;
    uint16_t macSuffix = 0x0000;
    uint8_t OEPLtype = 0;
    uint8_t solumType = 0;
--- a/ARM_Tag_FW/Newton_M3_nRF52811/hal/Newton_M3_nRF52811/tagtype_db.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/hal/Newton_M3_nRF52811/tagtype_db.cpp
@@ -36,6 +36,13 @@ void identifyTagInfo() {
    CA FE BA DE 15 0B 12 04 00 10 01 E0 01 20 03 39 00 03 81 9D 00 00 4C FF FF FF FF FF FF FF FF FF		7.4 UC8179
    F3 22 BC 05 15 0A 0D 04 00 19 01 A0 02 C0 03 38 07 07 01 80 00 00 64 FF FF FF FF FF FF FF FF FF		9.7 SSD
    AD BA FE CA 15 0A 1B 04 00 19 01 A0 02 C0 03 38 07 07 01 80 00 00 64 FF FF FF FF FF FF FF FF FF		9.7 type 2
+    92 C3 80 05 15 08 19 04 00 12 01 18 03 10 01 04 07 07 01 80 00 00 63 FF FF FF FF FF FF FF FF FF     5.85 BWR
+    22 F0 BF 05 15 0A 14 04 00 12 00 18 03 10 01 04 07 07 01 80 00 00 24 FF FF FF FF FF FF FF FF FF     5.85 BW
+    99 78 B1 05 15 0A 06 04 00 0D 01 68 01 B8 00 38 07 07 01 80 00 00 43 FF FF FF FF FF FF FF FF FF     2.6"
+    72 92 1E 7E 15 0B 09 04 00 15 00 80 01 A8 00 38 00 01 01 9C 00 00 22 FF FF FF FF FF FF FF FF FF     2.9" FREEZER
+    31 50 53 06 16 02 19 04 00 12 01 C8 00 C8 00 04 00 07 01 9C 00 00 40 FF FF FF FF FF FF FF FF FF
+
+

            MAC    | calib  |	  |?????|Xres |Yres |  ???   |capab|    |type|

@@ -49,7 +56,7 @@ void identifyTagInfo() {
            0x12 - SSD (var1.6)
            0x15 - SSD (2.9 lite)
            0x19 - SSD (9.7)
-
+    0x0A -  Have third color?
    0x12 -  0x01 | (0x80 if it has a button)
    0x13 -  0x80 | (0x10 if it has a LED) | (0x0C ?? ) | (0x01 if it has a button)
    */
@@ -65,12 +72,20 @@ void identifyTagInfo() {
    capabilities[1] = getUICRByte(0x13);
    tag.solumType = getUICRByte(0x16);

+    if (getUICRByte(0x0A) == 0x01) {
+        tag.hasThirdColor = true;
+    }
+
    switch (controllerType) {
        case 0x0F:
        case 0x12:
        case 0x15:
        case 0x19:
-            epd = new unissd;
+            if (epdXRes == 792 && epdYRes == 272) {
+                epd = new dualssd;
+            } else {
+                epd = new unissd;
+            }
            break;
        case 0x0D:
            epd = new epdvar29;
@@ -106,6 +121,28 @@ void identifyTagInfo() {
    if (capabilities[1] & 0x10) tag.hasLED = true;
    if (capabilities[0] & 0x01) tag.hasNFC = true;

+#ifdef DEBUG_SHOW_TAGINFO
+
+    printf("TagType report:\n");
+    printf("Resolution: %d*%d Px\n", epd->Xres, epd->Yres);
+    printf("Nb of buttons: %d\n", tag.buttonCount);
+    if (tag.hasLED) {
+        printf("This tag have a led: Yes\n");
+    } else {
+        printf("This tag have a led: No\n");
+    }
+    if (tag.hasNFC) {
+        printf("This tag have NFC: Yes\n");
+    } else {
+        printf("This tag have NFC: No\n");
+    }
+    if (tag.hasThirdColor) {
+        printf("This tag is Black and white only: No\n");
+    } else {
+        printf("This tag is Black and white only: Yes\n");
+    }
+#endif
+
    // we'll calculate image slot size here
    uint32_t imageSize = epd->Xres * epd->Yres / 4;
    tag.imageSize = ((imageSize + EEPROM_ERZ_SECTOR_SZ - 1) / EEPROM_ERZ_SECTOR_SZ) * EEPROM_ERZ_SECTOR_SZ;
@@ -115,6 +152,8 @@ void identifyTagInfo() {
            tag.macSuffix = 0xB0D0;
            epd->epdMirrorV = true;
            tag.OEPLtype = SOLUM_M3_BWR_16;
+            epd->effectiveXRes = epdXRes;
+            epd->effectiveYRes = epdYRes - 1;  // Yeah... I wonder why too....
            break;
        case STYPE_SIZE_022:
            tag.macSuffix = 0xB190;
@@ -122,6 +161,12 @@ void identifyTagInfo() {
            tag.OEPLtype = SOLUM_M3_BWR_22;
            epd->XOffset = 8;
            break;
+        case STYPE_SIZE_026:
+            tag.macSuffix = 0xB3D0;
+            epd->drawDirectionRight = true;
+            tag.OEPLtype = SOLUM_M3_BWR_26;
+            epd->XOffset = 8;
+            break;
        case STYPE_SIZE_029:
            tag.OEPLtype = SOLUM_M3_BWR_29;
            if (tag.buttonCount == 2) {
@@ -134,6 +179,12 @@ void identifyTagInfo() {
            epd->drawDirectionRight = true;
            epd->XOffset = 8;
            break;
+        case STYPE_SIZE_029_FREEZER:
+            tag.OEPLtype = SOLUM_M3_BW_29;
+            tag.macSuffix = 0x82D0;
+            epd->drawDirectionRight = true;
+            epd->XOffset = 8;
+            break;
        case STYPE_SIZE_042:
            tag.macSuffix = 0xB6D0;
            tag.OEPLtype = SOLUM_M3_BWR_42;
@@ -145,6 +196,14 @@ void identifyTagInfo() {
            //            epd->mirrorH = true;
            tag.OEPLtype = SOLUM_M3_BWR_43;
            break;
+        case STYPE_SIZE_058:
+            tag.macSuffix = 0xE3D0;
+            tag.OEPLtype = SOLUM_M3_BWR_58;
+            break;
+        case STYPE_SIZE_058_FREEZER:
+            tag.macSuffix = 0x84D0;
+            tag.OEPLtype = SOLUM_M3_BW_58;
+            break;
        case STYPE_SIZE_060:
            tag.macSuffix = 0xB890;
            tag.OEPLtype = SOLUM_M3_BWR_60;
--- a/ARM_Tag_FW/Newton_M3_nRF52811/include/powermgt.h
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/include/powermgt.h
@@ -49,6 +49,8 @@

 #define BATTERY_VOLTAGE_MINIMUM 2450  // 2600 or below is the best we can do on the EPD

+#define WAKE_SECOND_CHECKIN_DELAY 10000UL
+
 // power saving when no AP's were found (scanning every X)
 #define VOLTAGEREADING_DURING_SCAN_INTERVAL 2  // how often we should read voltages; this is done every scan attempt in interval bracket 3
 #define INTERVAL_1_TIME 3600UL                 // Try every hour
--- a/ARM_Tag_FW/Newton_M3_nRF52811/include/settings.h
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/include/settings.h
@@ -5,12 +5,26 @@

 #define FW_VERSION 0x0027        // version number (max 2.5.5 :) )
 #define FW_VERSION_SUFFIX "ZLIB"  // suffix, like RC1 or whatever.
-#define DEBUGBLOCKS              // uncomment to enable extra debug information on the block transfers
+// #define DEBUGBLOCKS              // uncomment to enable extra debug information on the block transfers
 #endif

+// #define DEBUGBLOCKS                 // uncomment to enable extra debug information on the block transfers

+// #define DEBUG_SHOW_TAGINFO
+// #define DEBUG_DRAWING
+// #define DEBUG_EPD
+// #define DEBUG_FS
+// #define DEBUG_COMPRESSION
+// #define DEBUG_PROTO
+// #define DEBUG_SETTINGS
+// #define DEBUG_MAIN
+// #define DEBUG_FAST_CHECK_IN
+// #define DEBUG_DONTVALIDATEPROTO
+
+#if defined(DEBUG_SETTINGS) || defined(DEBUG_EPD) || defined(DEBUGBLOCKS) || defined(DEBUG_PROTO) || defined(DEBUG_COMPRESSION) || defined(DEBUG_FS) || defined(DEBUG_MAIN) || defined(DEBUG_FAST_CHECK_IN) || defined(DEBUG_SHOW_TAGINFO) || defined(DEBUG_DONTVALIDATEPROTO) || defined(DEBUG_DRAWING)
 #define DEBUG_BUILD
-#define DEBUG_DRAWING
+#endif
+


 #define SETTINGS_STRUCT_VERSION 0x01
--- a/ARM_Tag_FW/Newton_M3_nRF52811/platformio.ini
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/platformio.ini
@@ -1,5 +1,5 @@
 [platformio]
-core_dir = $PROJECT_DIR/core
+core_dir = D:/Documents/GitHub/OpenEPaperLink/ARM_Tag_FW/Newton_M3_nRF52811/core

 [env]
 platform = nordicnrf52@9.6.0
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/dualssd.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/dualssd.cpp
@@ -0,0 +1,212 @@
+#include <Arduino.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "lut.h"
+#include "settings.h"
+#include "hal.h"
+#include "wdt.h"
+
+#include "drawing.h"
+#include "dualssd.h"
+
+#define CMD_DRV_OUTPUT_CTRL 0x01
+#define CMD_SOFT_START_CTRL 0x0C
+#define CMD_ENTER_SLEEP 0x10
+#define CMD_DATA_ENTRY_MODE 0x11
+#define CMD_SOFT_RESET 0x12
+#define CMD_SOFT_RESET2 0x13
+#define CMD_SETUP_VOLT_DETECT 0x15
+#define CMD_TEMP_SENSOR_CONTROL 0x18
+#define CMD_ACTIVATION 0x20
+#define CMD_DISP_UPDATE_CTRL 0x21
+#define CMD_DISP_UPDATE_CTRL2 0x22
+#define CMD_WRITE_FB_BW 0x24
+#define CMD_WRITE_FB_RED 0x26
+#define CMD_VCOM_GLITCH_CTRL 0x2B
+#define CMD_LOAD_OTP_LUT 0x31
+#define CMD_WRITE_LUT 0x32
+#define CMD_BORDER_WAVEFORM_CTRL 0x3C
+#define CMD_WINDOW_X_SIZE 0x44
+#define CMD_WINDOW_Y_SIZE 0x45
+#define CMD_WRITE_PATTERN_RED 0x46
+#define CMD_WRITE_PATTERN_BW 0x47
+#define CMD_XSTART_POS 0x4E
+#define CMD_YSTART_POS 0x4F
+#define CMD_ANALOG_BLK_CTRL 0x74
+#define CMD_DIGITAL_BLK_CTRL 0x7E
+
+#define SCREEN_CMD_CLOCK_ON 0x80
+#define SCREEN_CMD_CLOCK_OFF 0x01
+#define SCREEN_CMD_ANALOG_ON 0x40
+#define SCREEN_CMD_ANALOG_OFF 0x02
+#define SCREEN_CMD_LATCH_TEMPERATURE_VAL 0x20
+#define SCREEN_CMD_LOAD_LUT 0x10
+#define SCREEN_CMD_USE_MODE_2 0x08  // modified commands 0x10 and 0x04
+#define SCREEN_CMD_REFRESH 0xC7
+
+#define CONTROLLER_ONE 0x00
+#define CONTROLLER_TWO 0x80
+
+void dualssd::selectLUT(uint8_t lut) {
+    // implement alternative LUTs here. Currently just reset the watchdog to two minutes,
+    // to ensure it doesn't reset during the much longer bootup procedure
+    lut += 1;  // make the compiler a happy camper
+    wdt120s();
+    return;
+}
+
+void dualssd::epdEnterSleep() {
+    epdWrite(CMD_ENTER_SLEEP, 1, 0x01);
+}
+void dualssd::epdSetup() {
+    printf("init epd...\n");
+    epdReset();
+    epdWrite(CMD_SOFT_RESET, 0);
+    delay(10);
+    switch (this->controllerType) {
+        case 0x0F:
+        case 0x12:
+        case 0x15:
+            /* 5.85 INIT SEQUENCE
+            0x11, 0x00
+            0x91, 0x01
+            0x44, 0x31, 0x00
+            0x45, 0x0F, 0x01, 0x00, 0x00
+            0x4E, 0x31
+            0x4F, 0x0F, 0x01
+            0xC4, 0x00, 0x31
+            0xC5, 0x0F, 0x01, 0x00, 0x00
+            0xCE, 0x00
+            0xCF, 0x0F, 0x01
+            0x3C, 0x01
+
+            */
+            /* 5.85 BW INIT SEQUENCE
+             0x11, 0x00
+             0x91, 0x01
+             0x44, 0x31, 0x00
+             0x45, 0x0F, 0x01, 0x00, 0x00
+             0x4E, 0x31
+             0x4F, 0x0F, 0x01
+             0xC4, 0x00, 0x31
+             0xC5, 0x0F, 0x01, 0x00, 0x00
+             0xCE, 0x00
+             0xCF, 0x0F, 0x01
+             0x3C, 0x01
+             */
+
+            epdWrite(CMD_DATA_ENTRY_MODE + CONTROLLER_ONE, 1, 0x02);
+            epdWrite(CMD_DATA_ENTRY_MODE + CONTROLLER_TWO, 1, 0x03);
+
+            if (tag.hasThirdColor) {
+                epdWrite(CMD_DISP_UPDATE_CTRL, 2, 0x08, 0x10);
+            } else {
+                epdWrite(CMD_DISP_UPDATE_CTRL, 2, 0x48, 0x10);
+            }
+
+            epdWrite(CMD_WINDOW_X_SIZE + CONTROLLER_ONE, 2, 0x31, 0x00);
+            epdWrite(CMD_WINDOW_Y_SIZE + CONTROLLER_ONE, 4, 0x00, 0x00, 0x0F, 0x01);
+            epdWrite(CMD_XSTART_POS + CONTROLLER_ONE, 1, 0x31);
+            epdWrite(CMD_YSTART_POS + CONTROLLER_ONE, 2, 0x00, 0x00);
+
+            epdWrite(CMD_WINDOW_X_SIZE + CONTROLLER_TWO, 2, 0x00, 0x31);
+            epdWrite(CMD_WINDOW_Y_SIZE + CONTROLLER_TWO, 4, 0x00, 0x00, 0x0F, 0x01);
+            epdWrite(CMD_XSTART_POS + CONTROLLER_TWO, 1, 0x00);
+            epdWrite(CMD_YSTART_POS + CONTROLLER_TWO, 2, 0x0F, 0x01);
+
+            epdWrite(CMD_BORDER_WAVEFORM_CTRL, 1, 0x01);
+            break;
+    }
+}
+
+void dualssd::epdWriteDisplayData() {
+    uint8_t *buf[2] = {0, 0};  // this will hold pointers to odd/even data lines
+    // Those dual SSD controller (SSD1683??) behave as 2 400pxx wide screens, that needs independent data transfers.
+    uint8_t c_increment = 1;
+    if (!tag.hasThirdColor) {
+        c_increment = 2;
+    }
+    for (uint8_t c = 0; c < 4; c = c + c_increment) {
+        delay(10);
+        if (c == 0) epd_cmd(CMD_WRITE_FB_BW + CONTROLLER_ONE);   // BW
+        if (c == 1) epd_cmd(CMD_WRITE_FB_RED + CONTROLLER_ONE);  // RED
+        if (c == 2) epd_cmd(CMD_WRITE_FB_BW + CONTROLLER_TWO);   // BW
+        if (c == 3) epd_cmd(CMD_WRITE_FB_RED + CONTROLLER_TWO);  // RED
+
+        delay(10);
+        markData();
+        epdSelect();
+
+        for (uint16_t curY = 0; curY < epd->effectiveYRes; curY += 2) {
+            // Get 'even' screen line
+            buf[0] = (uint8_t *)calloc(epd->effectiveXRes / 8, 1);
+
+            drawItem::renderDrawLine(buf[0], curY, c % 2);
+
+            if (epd->epdMirrorH) drawItem::reverseBytes(buf[0], epd->effectiveXRes / 8);
+            // on the first pass, the second (buf[1]) buffer is unused, so we don't have to wait for it to flush to the display / free it
+            if (buf[1]) {
+                // wait for 'odd' display line to finish writing to the screen
+                epdSPIWait();
+                free(buf[1]);
+            }
+
+            // start transfer of even data line to the screen
+            if (c < 2) {
+                epdSPIAsyncWrite(buf[0] + (epd->effectiveXRes / 16), (epd->effectiveXRes / 16) + 1);
+            } else {
+                epdSPIAsyncWrite(buf[0], (epd->effectiveXRes / 16) + 1);
+            }
+
+            // Get 'odd' screen display line
+            buf[1] = (uint8_t *)calloc(epd->effectiveXRes / 8, 1);
+
+            drawItem::renderDrawLine(buf[1], curY + 1, c % 2);
+
+            if (epd->epdMirrorH) drawItem::reverseBytes(buf[1], epd->effectiveXRes / 8);
+
+            // wait until the 'even' data has finished writing
+            epdSPIWait();
+            free(buf[0]);
+
+            // start transfer of the 'odd' data line
+            if (c < 2) {
+                epdSPIAsyncWrite(buf[1] + (epd->effectiveXRes / 16), (epd->effectiveXRes / 16) + 1);
+            } else {
+                epdSPIAsyncWrite(buf[1], (epd->effectiveXRes / 16) + 1);
+            }
+        }
+        // check if this was the first pass. If it was, we'll need to wait until the last display line finished writing
+        if (c == 0 || c == 2) {
+            epdSPIWait();
+            epdDeselect();
+            free(buf[1]);
+            buf[1] = nullptr;
+        }
+    }
+    // flush the draw list, make sure items don't appear on subsequent screens
+    drawItem::flushDrawItems();
+
+    // wait until the last line of display has finished writing and clean our stuff up
+    epdSPIWait();
+    epdDeselect();
+    if (buf[1]) free(buf[1]);
+}
+
+void dualssd::draw() {
+    drawNoWait();
+    getVoltage();
+    epdBusyWaitFalling(120000);
+}
+void dualssd::drawNoWait() {
+    epdWriteDisplayData();
+    // epdWrite(CMD_DISP_UPDATE_CTRL2, 1, 0xF7);
+    epdWrite(CMD_ACTIVATION, 0);
+}
+void dualssd::epdWaitRdy() {
+    epdBusyWaitFalling(120000);
+}
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/dualssd.h
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/dualssd.h
@@ -0,0 +1,23 @@
+#ifndef _EPD_DUALSSD_H_
+#define _EPD_DUALSSD_H_
+
+class dualssd : public epdInterface {
+   public:
+    void epdSetup();
+    void epdEnterSleep();
+    void draw();
+    void drawNoWait();
+    void epdWaitRdy();
+    void epdWriteDisplayData();
+    void selectLUT(uint8_t lut);
+
+   protected:
+   void commandReadBegin(uint8_t cmd);
+   void commandReadEnd();
+   uint8_t epdReadByte();
+   void setWindowX(uint16_t start, uint16_t end);
+   void setWindowY(uint16_t start, uint16_t end);
+   void setPosXY(uint16_t x, uint16_t y);
+};
+
+#endif
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/epd_interface.h
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/epd_interface.h
@@ -21,6 +21,7 @@ void selectLUT(uint8_t lut);

 #include "uc_variant_043.h"
 #include "unissd.h"
+#include "dualssd.h"
 #include "uc_variant_029.h"
 #include "uc8159.h"
 #include "uc8179.h"
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/unissd.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/epd_driver/unissd.cpp
@@ -75,14 +75,23 @@ void unissd::epdSetup() {
        case 0x15:
            // stock init 1.6"
            epdWrite(CMD_DRV_OUTPUT_CTRL, 3, this->effectiveYRes & 0xFF, this->effectiveYRes >> 8, 0x00);
-            epdWrite(CMD_DATA_ENTRY_MODE, 1, 0x01);
+            if (epd->epdMirrorV) {
+                epdWrite(CMD_DATA_ENTRY_MODE, 1, 0x03);
+                epdWrite(CMD_WINDOW_Y_SIZE, 4, this->YOffset & 0xFF, this->YOffset >> 8, (this->YOffset + this->effectiveYRes) & 0xFF, (this->YOffset + this->effectiveYRes) >> 8);
+            } else {
+                epdWrite(CMD_DATA_ENTRY_MODE, 1, 0x01);
+                epdWrite(CMD_WINDOW_Y_SIZE, 4, (this->YOffset + this->effectiveYRes) & 0xFF, (this->YOffset + this->effectiveYRes) >> 8, this->YOffset & 0xFF, this->YOffset >> 8);
+            }
            epdWrite(CMD_WINDOW_X_SIZE, 2, this->XOffset / 8, ((this->XOffset + this->effectiveXRes) / 8) - 1);
-            epdWrite(CMD_WINDOW_Y_SIZE, 4, (this->YOffset + this->effectiveYRes) & 0xFF, (this->YOffset + this->effectiveYRes) >> 8, this->YOffset & 0xFF, this->YOffset >> 8);
            epdWrite(CMD_BORDER_WAVEFORM_CTRL, 1, 0x05);
            epdWrite(CMD_TEMP_SENSOR_CONTROL, 1, 0x80);
            // end stock init
            // added
-            epdWrite(CMD_DISP_UPDATE_CTRL, 2, 0x08, 0x00);  // fix reversed image with stock setup
+            if (tag.hasThirdColor) {
+                epdWrite(CMD_DISP_UPDATE_CTRL, 2, 0x08, 0x00);  // fix reversed image with stock setup
+            } else {
+                epdWrite(CMD_DISP_UPDATE_CTRL, 2, 0x48, 0x00);  // fix reversed image with stock setup
+            }
            break;
        case 0x19:
            // stock init 9.7"
@@ -108,13 +117,21 @@ void unissd::epdSetup() {
 void unissd::epdWriteDisplayData() {
    // this display expects two entire framebuffers worth of data to be written, one for b/w and one for red
    uint8_t *buf[2] = {0, 0};  // this will hold pointers to odd/even data lines
-    for (uint8_t c = 0; c < 2; c++) {
+    uint8_t c_end = 2;         // The loop must be executed 2 times if BWR, 1 time if BW
+    if (!tag.hasThirdColor) {
+        c_end = 1;
+    }
+    for (uint8_t c = 0; c < c_end; c++) {
        switch (this->controllerType) {
            case 0x0F:
            case 0x12:
            case 0x15:
                epdWrite(CMD_XSTART_POS, 1, (this->XOffset / 8));
-                epdWrite(CMD_YSTART_POS, 2, (this->YOffset + this->effectiveYRes) & 0xFF, (this->YOffset + this->effectiveYRes) >> 8);
+                if (epd->epdMirrorV) {
+                    epdWrite(CMD_YSTART_POS, 2, this->YOffset & 0xFF, (this->YOffset) >> 8);
+                } else {
+                    epdWrite(CMD_YSTART_POS, 2, (this->YOffset + this->effectiveYRes) & 0xFF, (this->YOffset + this->effectiveYRes) >> 8);
+                }
                break;
            case 0x19:
                epdWrite(CMD_XSTART_POS, 2, 0xBF, 0x03);
@@ -130,11 +147,8 @@ void unissd::epdWriteDisplayData() {
            // Get 'even' screen line
            buf[0] = (uint8_t *)calloc(epd->effectiveXRes / 8, 1);

-            if (epd->epdMirrorV) {
-                drawItem::renderDrawLine(buf[0], (epd->effectiveYRes - 1) - curY, c);
-            } else {
-                drawItem::renderDrawLine(buf[0], curY, c);
-            }
+            drawItem::renderDrawLine(buf[0], curY, c);
+
            if (epd->epdMirrorH) drawItem::reverseBytes(buf[0], epd->effectiveXRes / 8);
            // on the first pass, the second (buf[1]) buffer is unused, so we don't have to wait for it to flush to the display / free it
            if (buf[1]) {
@@ -148,11 +162,9 @@ void unissd::epdWriteDisplayData() {

            // Get 'odd' screen display line
            buf[1] = (uint8_t *)calloc(epd->effectiveXRes / 8, 1);
-            if (epd->epdMirrorV) {
-                drawItem::renderDrawLine(buf[1], (epd->effectiveYRes - 1) - (curY + 1), c);
-            } else {
-                drawItem::renderDrawLine(buf[1], curY + 1, c);
-            }
+
+            drawItem::renderDrawLine(buf[1], curY + 1, c);
+
            if (epd->epdMirrorH) drawItem::reverseBytes(buf[1], epd->effectiveXRes / 8);

            // wait until the 'even' data has finished writing
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/main.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/main.cpp
@@ -84,25 +84,10 @@ bool displayCustomImage(uint8_t imagetype) {
    return false;
 }

-void externalWakeHandler(uint8_t type) {
-    if (displayCustomImage(type)) {
-        doSleep(2000);
-
-        // if something else was previously on the display, draw that
-        if (curImgSlot != 0xFF) {
-            powerUp(INIT_EEPROM);
-            uint8_t lut = getEepromImageDataArgument(curImgSlot);
-            lut &= 0x03;
-            powerUp(INIT_EPD);
-            drawImageFromEeprom(curImgSlot, lut);
-            powerDown(INIT_EPD | INIT_EEPROM);
-        }
-    }
-}
-
 void TagAssociated() {
    // associated
    bool fastNextCheckin = false;
+    uint32_t fastNextCheckinDelay = WAKE_SECOND_CHECKIN_DELAY;
    struct AvailDataInfo *avail;
    static bool buttonCheckOut = false;  // send another full request if the previous was a trigger reason (buttons, nfc)
    // Is there any reason why we should do a long (full) get data request (including reason, status)?
@@ -139,23 +124,23 @@ void TagAssociated() {

        switch (wakeUpReason) {
            case WAKEUP_REASON_BUTTON1:
-                externalWakeHandler(CUSTOM_IMAGE_BUTTON1);
+                if (displayCustomImage(CUSTOM_IMAGE_BUTTON1)) fastNextCheckinDelay = 0;
                fastNextCheckin = true;
                break;
            case WAKEUP_REASON_BUTTON2:
-                externalWakeHandler(CUSTOM_IMAGE_BUTTON2);
+                if (displayCustomImage(CUSTOM_IMAGE_BUTTON2)) fastNextCheckinDelay = 0;
                fastNextCheckin = true;
                break;
            case WAKEUP_REASON_GPIO:
-                externalWakeHandler(CUSTOM_IMAGE_GPIO);
+                if (displayCustomImage(CUSTOM_IMAGE_GPIO)) fastNextCheckinDelay = 0;
                fastNextCheckin = true;
                break;
            case WAKEUP_REASON_RF:
-                externalWakeHandler(CUSTOM_IMAGE_RF_WAKE);
+                if (displayCustomImage(CUSTOM_IMAGE_RF_WAKE)) fastNextCheckinDelay = 0;
                fastNextCheckin = true;
                break;
            case WAKEUP_REASON_NFC:
-                externalWakeHandler(CUSTOM_IMAGE_NFC_WAKE);
+                if (displayCustomImage(CUSTOM_IMAGE_NFC_WAKE)) fastNextCheckinDelay = 0;
                fastNextCheckin = true;
                break;
        }
@@ -168,7 +153,7 @@ void TagAssociated() {
            }

            // since we've had succesful contact, and communicated the wakeup reason succesfully, we can now reset to the 'normal' status
-            if ((wakeUpReason == WAKEUP_REASON_BUTTON1) | (wakeUpReason == WAKEUP_REASON_BUTTON2) | (wakeUpReason == WAKEUP_REASON_NFC) | (wakeUpReason == CUSTOM_IMAGE_RF_WAKE)) {
+            if ((wakeUpReason == WAKEUP_REASON_GPIO) | (wakeUpReason == WAKEUP_REASON_BUTTON1) | (wakeUpReason == WAKEUP_REASON_BUTTON2) | (wakeUpReason == WAKEUP_REASON_NFC) | (wakeUpReason == CUSTOM_IMAGE_RF_WAKE)) {
                buttonCheckOut = true;
            }
            wakeUpReason = WAKEUP_REASON_TIMED;
@@ -225,9 +210,13 @@ void TagAssociated() {
    if (fastNextCheckin) {
        // do a fast check-in next
        fastNextCheckin = false;
-        doSleep(100UL);
+        if (fastNextCheckinDelay) {
+            doSleep(fastNextCheckinDelay);
+        } else {
+            doSleep(100UL);
+        }
    } else {
-        if (nextCheckInFromAP) {
+        if (nextCheckInFromAP & 0x7FFF) {
            // if the AP told us to sleep for a specific period, do so.
            if (nextCheckInFromAP & 0x8000) {
                doSleep((nextCheckInFromAP & 0x7FFF) * 1000UL);
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/syncedproto.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/syncedproto.cpp
@@ -25,20 +25,21 @@ struct fwmetadata {

 #define EEPROM_SETTINGS_SIZE 4096

-#define BLOCKSIZE_MS 240  // was 270
+#define BLOCKSIZE_MS 280  // was 270

 #define FWNRF
 #define LEDSENABLED
-#define PERSISTENTVAR 
-#define HAL_TIMER_TICK 1
+#define PERSISTENTVAR
 #define EEPROM_IMG_START 0

-
+;
 #define HAL_PacketRX commsRxUnencrypted
 #define HAL_msDelay delay

 void dump(const uint8_t *a, const uint16_t l);

+extern void executeCommand(uint8_t cmd);  // this is defined in main.c
+
 static void saveUpdateMetadata(uint32_t size) {
    struct fwmetadata metadata;
    metadata.magic1 = MAGIC1;
@@ -71,8 +72,12 @@ static bool validateEepromMD5(uint64_t ver, uint32_t eepromstart, uint32_t flen)
        printf("This is what we got:\n");
        dump(hash, 16);
    }
+
+#ifdef DEBUG_DONTVALIDATEPROTO
    return true;
+#else
    return isValid;
+#endif
 }

 #include "../../common/oepl-protocol.cpp"
--- a/ARM_Tag_FW/Newton_M3_nRF52811/src/userinterface.cpp
+++ b/ARM_Tag_FW/Newton_M3_nRF52811/src/userinterface.cpp
@@ -26,12 +26,19 @@ bool lowBatteryShown = false;
 bool noAPShown = false;

 void addOverlay() {
+
    if (currentChannel == 0) {
-        drawMask(epd->Xres - 27, 5, 22, 22, COLOR_BLACK);
-        drawMask(epd->Xres - 27, 5, 22, 22, COLOR_RED);
-        drawRoundedRectangle(epd->Xres - 28, 4, 24, 24, COLOR_RED);
-        addBufferedImage(epd->Xres - 24, 8, COLOR_BLACK, rotation::ROTATE_0, ant, DRAW_NORMAL);
-        addBufferedImage(epd->Xres - 16, 15, COLOR_RED, rotation::ROTATE_0, cross, DRAW_NORMAL);
+        drawMask(epd->Xres - 28, 4, 24, 24, COLOR_BLACK);
+        if(tag.hasThirdColor){
+            drawMask(epd->Xres - 28, 4, 24, 24, COLOR_RED);
+            drawRoundedRectangle(epd->Xres - 28, 4, 24, 24, COLOR_RED);
+            addBufferedImage(epd->Xres - 24, 8, COLOR_BLACK, rotation::ROTATE_0, ant, DRAW_NORMAL);
+            addBufferedImage(epd->Xres - 16, 15, COLOR_RED, rotation::ROTATE_0, cross, DRAW_NORMAL);
+        }else{
+            drawRoundedRectangle(epd->Xres - 28, 4, 24, 24, COLOR_BLACK);
+            addBufferedImage(epd->Xres - 24, 8, COLOR_BLACK, rotation::ROTATE_0, ant, DRAW_NORMAL);
+            addBufferedImage(epd->Xres - 16, 15, COLOR_BLACK, rotation::ROTATE_0, cross, DRAW_NORMAL);
+        }
        noAPShown = true;
    } else {
        noAPShown = false;
@@ -39,8 +46,13 @@ void addOverlay() {

    if (lowBattery) {
        drawMask(epd->Xres - 27, epd->Yres - 26, 22, 22, COLOR_BLACK);
-        drawMask(epd->Xres - 27, epd->Yres - 26, 22, 22, COLOR_RED);
-        drawRoundedRectangle(epd->Xres - 28, epd->Yres - 26, 24, 24, COLOR_RED);
+        if(tag.hasThirdColor){
+            drawMask(epd->Xres - 27, epd->Yres - 26, 22, 22, COLOR_RED);
+            drawRoundedRectangle(epd->Xres - 28, epd->Yres - 26, 24, 24, COLOR_RED);
+        }else{
+            drawMask(epd->Xres - 27, epd->Yres - 26, 22, 22, COLOR_BLACK);
+            drawRoundedRectangle(epd->Xres - 28, epd->Yres - 26, 24, 24, COLOR_BLACK);
+        }
        addBufferedImage(epd->Xres - 24, epd->Yres - 19, COLOR_BLACK, rotation::ROTATE_0, battery, DRAW_NORMAL);
        lowBatteryShown = true;
    } else {
@@ -48,10 +60,16 @@ void addOverlay() {
    }
 #ifdef DEBUG_BUILD
    fontrender fr(&FreeSansBold18pt7b);
-    drawMask(15, epd->Yres - 53, 129, 33, COLOR_BLACK);
-    drawMask(15, epd->Yres - 53, 129, 33, COLOR_RED);
-    drawRoundedRectangle(15, epd->Yres - 53, 129, 33, COLOR_RED);
-    fr.epdPrintf(17, epd->Yres - 50, COLOR_RED, rotation::ROTATE_0, "DEBUG");
+    drawMask(15, epd->Yres - 53, 130, 33, COLOR_BLACK);
+    if(tag.hasThirdColor){
+        drawMask(15, epd->Yres - 53, 130, 33, COLOR_RED);
+        drawRoundedRectangle(15, epd->Yres - 53, 129, 33, COLOR_RED);
+        fr.epdPrintf(17, epd->Yres - 50, COLOR_RED, rotation::ROTATE_0, "DEBUG");
+    }else{
+        drawMask(15, epd->Yres - 53, 130, 33, COLOR_BLACK);
+        drawRoundedRectangle(15, epd->Yres - 53, 129, 33, COLOR_BLACK);
+        fr.epdPrintf(17, epd->Yres - 50, COLOR_BLACK, rotation::ROTATE_0, "DEBUG");
+    }
 #endif
 }

@@ -67,9 +85,9 @@ void showSplashScreen() {
        case STYPE_SIZE_016:
            fr.setFont(&FreeSans9pt7b);
            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
-            fr.epdPrintf(10, 38, COLOR_RED, rotation::ROTATE_0, "Newton M3 2.2\"");
+            fr.epdPrintf(10, 38, COLOR_RED, rotation::ROTATE_0, "Newton M3 1.6\"");
            fr.epdPrintf(5, epd->Yres - 40, 0, rotation::ROTATE_0, "FW: %04X-%s", fwVersion, fwVersionSuffix);
-            fr.epdPrintf(2, epd->Yres - 20, 0, rotation::ROTATE_0, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            fr.epdPrintf(2, epd->Yres - 20, 0, rotation::ROTATE_0, "%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
        case STYPE_SIZE_022:
            fr.setFont(&FreeSansBold18pt7b);
@@ -81,6 +99,16 @@ void showSplashScreen() {
            fr.epdPrintf(5, epd->Yres - 20, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
+        case STYPE_SIZE_026:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 38, COLOR_RED, rotation::ROTATE_0, "Newton M3 2.6\"");
+            // fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(5, epd->Yres - 40, 0, rotation::ROTATE_0, "FW: %04X-%s", fwVersion, fwVersionSuffix);
+            fr.epdPrintf(5, epd->Yres - 20, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
        case STYPE_SIZE_029:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
@@ -91,6 +119,16 @@ void showSplashScreen() {
            fr.epdPrintf(5, epd->Yres - 20, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
+        case STYPE_SIZE_029_FREEZER:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 38, COLOR_BLACK, rotation::ROTATE_0, "Newton M3 2.9\" Freezer");
+            // fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(epd->Xres - 17, 0, COLOR_BLACK, rotation::ROTATE_270, "FW: %04X-%s", fwVersion, fwVersionSuffix);
+            fr.epdPrintf(5, epd->Yres - 20, COLOR_BLACK, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
        case STYPE_SIZE_042:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
@@ -111,6 +149,26 @@ void showSplashScreen() {
            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            addQR(epd->Xres - 120, 32, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
+        case STYPE_SIZE_058:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 38, COLOR_RED, rotation::ROTATE_0, "Newton M3 5.85\"");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(epd->Xres - 17, 0, 0, rotation::ROTATE_270, "FW: %04X-%s", fwVersion, fwVersionSuffix);
+            fr.epdPrintf(5, epd->Yres - 20, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
+        case STYPE_SIZE_058_FREEZER:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(2, 2, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 38, COLOR_BLACK, rotation::ROTATE_0, "Newton M3 5.85\" Freezer");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(epd->Xres - 17, 0, COLOR_BLACK, rotation::ROTATE_270, "FW: %04X-%s", fwVersion, fwVersionSuffix);
+            fr.epdPrintf(5, epd->Yres - 20, COLOR_BLACK, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
        case STYPE_SIZE_060:
            fr.setFont(&FreeSansBold24pt7b);
            fr.epdPrintf(10, 10, COLOR_BLACK, rotation::ROTATE_0, "OpenEPaperLink");
@@ -145,12 +203,19 @@ void showSplashScreen() {
            addQR(260, 160, 3, 7, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
    }
-#ifdef DEBUGBLOCKS
+#ifdef DEBUG_BUILD
    drawMask(15, epd->Yres - 53, 129, 33, COLOR_BLACK);
-    drawMask(15, epd->Yres - 53, 129, 33, COLOR_RED);
-    drawRoundedRectangle(15, epd->Yres - 53, 129, 33, COLOR_RED);
-    fr.setFont(&FreeSansBold18pt7b);
-    fr.epdPrintf(17, epd->Yres - 50, COLOR_RED, rotation::ROTATE_0, "DEBUG");
+    if(tag.hasThirdColor){
+        drawMask(15, epd->Yres - 53, 129, 33, COLOR_RED);
+        drawRoundedRectangle(15, epd->Yres - 53, 129, 33, COLOR_RED);
+        fr.setFont(&FreeSansBold18pt7b);
+        fr.epdPrintf(17, epd->Yres - 50, COLOR_RED, rotation::ROTATE_0, "DEBUG");
+    }else{
+        drawMask(15, epd->Yres - 53, 129, 33, COLOR_BLACK);
+        drawRoundedRectangle(15, epd->Yres - 53, 129, 33, COLOR_BLACK);
+        fr.setFont(&FreeSansBold18pt7b);
+        fr.epdPrintf(17, epd->Yres - 50, COLOR_BLACK, rotation::ROTATE_0, "DEBUG");
+    }
 #endif
    draw();
 }
@@ -198,6 +263,18 @@ void showAPFound() {
            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
+        case STYPE_SIZE_026:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 53, COLOR_RED, rotation::ROTATE_0, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", APmac[7], APmac[6], APmac[5], APmac[4], APmac[3], APmac[2], APmac[1], APmac[0]);
+            fr.epdPrintf(10, 71, COLOR_RED, rotation::ROTATE_0, "RSSI: %ddBm    LQI: %d", mLastRSSI, mLastLqi);
+            fr.epdPrintf(10, 89, COLOR_RED, rotation::ROTATE_0, "Ch %d", currentChannel);
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, epd->Yres - 43, 0, rotation::ROTATE_0, "Battery: %d.%dV Temp: %d'C", batteryVoltage / 1000, batteryVoltage % 1000, temperature);
+            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
        case STYPE_SIZE_029:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found");
@@ -210,6 +287,18 @@ void showAPFound() {
            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
+        case STYPE_SIZE_029_FREEZER:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 53, COLOR_BLACK, rotation::ROTATE_0, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", APmac[7], APmac[6], APmac[5], APmac[4], APmac[3], APmac[2], APmac[1], APmac[0]);
+            fr.epdPrintf(10, 71, COLOR_BLACK, rotation::ROTATE_0, "RSSI: %ddBm    LQI: %d", mLastRSSI, mLastLqi);
+            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "Ch %d", currentChannel);
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, epd->Yres - 43, 0, rotation::ROTATE_0, "Battery: %d.%dV Temp: %d'C", batteryVoltage / 1000, batteryVoltage % 1000, temperature);
+            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
        case STYPE_SIZE_042:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found");
@@ -235,6 +324,30 @@ void showAPFound() {
            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            break;
+        case STYPE_SIZE_058:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 53, COLOR_RED, rotation::ROTATE_0, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", APmac[7], APmac[6], APmac[5], APmac[4], APmac[3], APmac[2], APmac[1], APmac[0]);
+            fr.epdPrintf(10, 71, COLOR_RED, rotation::ROTATE_0, "RSSI: %ddBm    LQI: %d", mLastRSSI, mLastLqi);
+            fr.epdPrintf(10, 89, COLOR_RED, rotation::ROTATE_0, "Ch %d", currentChannel);
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, epd->Yres - 43, 0, rotation::ROTATE_0, "Battery: %d.%dV Temp: %d'C", batteryVoltage / 1000, batteryVoltage % 1000, temperature);
+            fr.epdPrintf(10, epd->Yres - 25, 0, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
+        case STYPE_SIZE_058_FREEZER:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, 53, COLOR_BLACK, rotation::ROTATE_0, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", APmac[7], APmac[6], APmac[5], APmac[4], APmac[3], APmac[2], APmac[1], APmac[0]);
+            fr.epdPrintf(10, 71, COLOR_BLACK, rotation::ROTATE_0, "RSSI: %ddBm    LQI: %d", mLastRSSI, mLastLqi);
+            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "Ch %d", currentChannel);
+            fr.setFont(&FreeSans9pt7b);
+            fr.epdPrintf(10, epd->Yres - 43, COLOR_BLACK, rotation::ROTATE_0, "Battery: %d.%dV Temp: %d'C", batteryVoltage / 1000, batteryVoltage % 1000, temperature);
+            fr.epdPrintf(10, epd->Yres - 25, COLOR_BLACK, rotation::ROTATE_0, "MAC: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            break;
        case STYPE_SIZE_060:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "AP Found - Waiting for data");
@@ -296,6 +409,16 @@ void showNoAP() {
            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
            fr.epdPrintf(10, 109, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by pressing a button");
            break;
+        case STYPE_SIZE_026:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            fr.epdPrintf(10, 69, COLOR_BLACK, rotation::ROTATE_0, "Couldn't find an AP :(");
+            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
+            fr.epdPrintf(10, 109, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by scanning");
+            fr.epdPrintf(10, 129, COLOR_BLACK, rotation::ROTATE_0, "the NFC-wake area with your phone");
+            break;
        case STYPE_SIZE_029:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found");
@@ -305,6 +428,15 @@ void showNoAP() {
            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
            fr.epdPrintf(10, 109, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by pressing a button");
            break;
+        case STYPE_SIZE_029_FREEZER:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            fr.epdPrintf(10, 69, COLOR_BLACK, rotation::ROTATE_0, "Couldn't find an AP :(");
+            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
+            fr.epdPrintf(10, 109, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by pressing a button");
+            break;
        case STYPE_SIZE_042:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found");
@@ -328,6 +460,26 @@ void showNoAP() {
            fr.epdPrintf(152, 89, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by scanning");
            fr.epdPrintf(152, 109, COLOR_BLACK, rotation::ROTATE_0, "the NFC-wake area with your phone");
            break;
+        case STYPE_SIZE_058:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            fr.epdPrintf(10, 69, COLOR_BLACK, rotation::ROTATE_0, "Couldn't find an AP :(");
+            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
+            fr.epdPrintf(152, 109, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by scanning");
+            fr.epdPrintf(152, 129, COLOR_BLACK, rotation::ROTATE_0, "the NFC-wake area with your phone");
+            break;
+        case STYPE_SIZE_058_FREEZER:
+            fr.setFont(&FreeSansBold18pt7b);
+            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found");
+            fr.setFont(&FreeSans9pt7b);
+            addQR(epd->Xres - 120, 42, 3, 3, "https://openepaperlink.eu/tag/0/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
+            fr.epdPrintf(10, 69, COLOR_BLACK, rotation::ROTATE_0, "Couldn't find an AP :(");
+            fr.epdPrintf(10, 89, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
+            fr.epdPrintf(152, 109, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by scanning");
+            fr.epdPrintf(152, 129, COLOR_BLACK, rotation::ROTATE_0, "the NFC-wake area with your phone");
+            break;
        case STYPE_SIZE_060:
            fr.setFont(&FreeSansBold18pt7b);
            fr.epdPrintf(7, 7, COLOR_BLACK, rotation::ROTATE_0, "No AP Found          U_U");
@@ -357,7 +509,8 @@ void showNoAP() {
            addQR(epd->Xres - 66, 47, 3, 2, "https://openepaperlink.eu/tag/1/%02X/%02X%02X%02X%02X%02X%02X%02X%02X/", tag.OEPLtype, mSelfMac[7], mSelfMac[6], mSelfMac[5], mSelfMac[4], mSelfMac[3], mSelfMac[2], mSelfMac[1], mSelfMac[0]);
            fr.epdPrintf(10, 39, COLOR_BLACK, rotation::ROTATE_0, "Couldn't find an AP :(");
            fr.epdPrintf(10, 58, COLOR_BLACK, rotation::ROTATE_0, "I'll try again in a little while, but you");
-            fr.epdPrintf(10, 77, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by pressing a button");
+            fr.epdPrintf(10, 77, COLOR_BLACK, rotation::ROTATE_0, "can force a retry now by scanning");
+            fr.epdPrintf(10, 98, COLOR_BLACK, rotation::ROTATE_0, "the NFC-wake area with your phone");
            addFlashImage(200, 128, COLOR_BLACK, rotation::ROTATE_0, pandablack);
            addFlashImage(312, 274, COLOR_RED, rotation::ROTATE_0, pandared);
            break;
--- a/ARM_Tag_FW/common/compression.cpp
+++ b/ARM_Tag_FW/common/compression.cpp
@@ -16,7 +16,9 @@ int decompCallback(TINF_DATA *d) {
                return dec->getNextCompressedBlockFromFlash();
        }
    }
+    #ifdef DEBUG_COMPRESSION
    printf("FS: Couldn't find callback...\n");
+    #endif
    return -1;
 }

@@ -42,13 +44,17 @@ bool decompress::readHeader() {

    // check if the file served has a sensible window size
    if (window > MAX_WINDOW_SIZE) {
+#ifdef DEBUG_COMPRESSION
        printf("FS: Asked to decompress a file with a specified window size of %d, I don't see that happening\n", window);
+#endif
        return false;
    } else {
-        //printf("FS: Opened compressed file with dictionary size %d\n", window);
+#ifdef DEBUG_COMPRESSION
+        printf("FS: Opened compressed file with dictionary size %d\n", window);
+#endif
    }

-    window = 8192;
+    // window = 8192;

    // allocate dict/window if not already allocated
    if (!this->dictionary) this->dictionary = (uint8_t *)malloc(window);
--- a/ARM_Tag_FW/common/drawing.cpp
+++ b/ARM_Tag_FW/common/drawing.cpp
@@ -63,7 +63,7 @@ void addBufferedImage(uint16_t x, uint16_t y, bool color, enum rotation ro, cons
        di->type = drawItem::drawType::DRAW_MASK;
    else
        di->type = drawItem::drawType::DRAW_BUFFERED_1BPP;
-
+    di->checkBounds();
    di->addToList();
 }

@@ -85,6 +85,7 @@ void addFlashImage(uint16_t x, uint16_t y, bool color, enum rotation ro, const u
    di->color = color;
    di->cleanUp = false;
    di->type = drawItem::drawType::DRAW_BUFFERED_1BPP;
+    di->checkBounds();
    di->addToList();
 }
 #ifdef ENABLE_OEPLFS
@@ -119,6 +120,7 @@ void addFSImage(uint16_t x, uint16_t y, uint8_t color, enum rotation ro, char *n
    } else {
        di->type = drawItem::drawType::DRAW_OEPLFS_1BPP;
    }
+    di->checkBounds();
    di->addToList();
 }

@@ -153,6 +155,7 @@ void addCompressedFSImage(uint16_t x, uint16_t y, enum rotation ro, char *name)
    di->color = imgheader.bpp;
    if (di->color == 1) di->color = 0;
    di->cleanUp = true;
+    di->checkBounds();
    di->addToList();
 }
 #endif
@@ -207,12 +210,12 @@ void addQR(uint16_t x, uint16_t y, uint8_t version, uint8_t scale, const char *c
    di->ypos = y;
    di->color = 0;
    di->type = drawItem::drawType::DRAW_BUFFERED_1BPP;
+
+    di->checkBounds();
    di->addToList();
 }

 void drawImageAtAddressWrap(uint32_t addr, uint8_t lut) {
-    // powerUp(INIT_EEPROM);
-    // epdSetup();
    selectLUT(lut);
    struct EepromImageHeader eih;
    HAL_flashRead(addr, (uint8_t *)&eih, sizeof(struct EepromImageHeader));
@@ -229,8 +232,12 @@ void drawImageAtAddressWrap(uint32_t addr, uint8_t lut) {
            di->addItem((uint8_t *)addr, epd->effectiveXRes, epd->effectiveYRes);
            di->type = drawItem::drawType::DRAW_EEPROM_1BPP;
            di->direction = false;
-            if (di->mirrorH) di->mirrorV = !di->mirrorV;
+            if (di->mirrorH) {
+                di->mirrorH = 0;
+                di->mirrorV = !di->mirrorV;
+            }
            di->cleanUp = false;
+            di->checkBounds();
            di->addToList();
        } break;
        case DATATYPE_IMG_RAW_2BPP: {
@@ -242,8 +249,12 @@ void drawImageAtAddressWrap(uint32_t addr, uint8_t lut) {
            di->addItem((uint8_t *)addr, epd->effectiveXRes, epd->effectiveYRes);
            di->type = drawItem::drawType::DRAW_EEPROM_2BPP;
            di->direction = false;
-            if (di->mirrorH) di->mirrorV = !di->mirrorV;
+            if (di->mirrorH) {
+                di->mirrorH = 0;
+                di->mirrorV = !di->mirrorV;
+            }
            di->cleanUp = false;
+            di->checkBounds();
            di->addToList();
        } break;
        case DATATYPE_IMG_ZLIB: {
@@ -273,15 +284,18 @@ void drawImageAtAddressWrap(uint32_t addr, uint8_t lut) {
            di->xpos = 0;
            di->ypos = 0;
            di->direction = false;
-            if (di->mirrorH) di->mirrorV = !di->mirrorV;
+            if (di->mirrorH) {
+                di->mirrorH = 0;
+                di->mirrorV = !di->mirrorV;
+            }
            if (imgheader.bpp == 1) di->color = 0;
            if (imgheader.bpp == 2) di->color = 2;
            di->cleanUp = true;
+            di->checkBounds();
            di->addToList();
        } break;
    }
    addOverlay();
-
    draw();
 }

@@ -294,17 +308,19 @@ void drawImageAtAddress(uint32_t addr, uint8_t lut) {
 void drawRoundedRectangle(uint16_t xpos, uint16_t ypos, uint16_t width, uint16_t height, bool color) {
    uint16_t widthBytes = width / 8;
    if (width % 8) widthBytes++;
-    uint32_t framebufferSize = (widthBytes + 1) * height;
+    uint32_t framebufferSize = widthBytes * height;
    uint8_t *framebuffer = (uint8_t *)calloc(framebufferSize + 4, 1);
    if (framebuffer == NULL) {
        return;
    }
-
-    ((uint16_t *)framebuffer)[0] = width + 1;
+    uint8_t frameBufferZerosize = width;
+    if ((width % 8) != 0) {
+        frameBufferZerosize++;
+    }
+    ((uint16_t *)framebuffer)[0] = frameBufferZerosize;
    ((uint16_t *)framebuffer)[1] = height;

    framebuffer += 4;
-
    uint16_t w = width - 1;
    uint16_t x = 1;
    while (w--) {
@@ -456,9 +472,9 @@ void drawItem::getXLine(uint8_t *line, uint16_t y, uint8_t c) {
                    }
                }
                if (mirrorH) {
-                    copyWithByteShift(line, &buffer[((height - (y - ypos)) * widthBytes)], widthBytes, xpos / 8);
+                    copyWithByteShift(line, &buffer[((height - (y - ypos)) * widthBytes)], drawnWidthBytes, xpos / 8);
                } else {
-                    copyWithByteShift(line, &buffer[((y - ypos) * widthBytes)], widthBytes, xpos / 8);
+                    copyWithByteShift(line, &buffer[((y - ypos) * widthBytes)], drawnWidthBytes, xpos / 8);
                }
            }
            break;
@@ -479,7 +495,7 @@ void drawItem::getXLine(uint8_t *line, uint16_t y, uint8_t c) {
                if (mirrorV) {
                    reverseBytes(dbuffer, widthBytes);
                }
-                copyWithByteShift(line, dbuffer, widthBytes, xpos / 8);
+                copyWithByteShift(line, dbuffer, drawnWidthBytes, xpos / 8);
                free(dbuffer);
            }
            break;
@@ -499,20 +515,36 @@ void drawItem::getXLine(uint8_t *line, uint16_t y, uint8_t c) {
                if (mirrorV) {
                    reverseBytes(dbuffer, widthBytes);
                }
-                copyWithByteShift(line, dbuffer, widthBytes, xpos / 8);
+                copyWithByteShift(line, dbuffer, drawnWidthBytes, xpos / 8);
                free(dbuffer);
            }
            break;
        case DRAW_EEPROM_1BPP:
            if (c != color) return;
-            if (epd->drawDirectionRight)
+            if (mirrorH)
                y = epd->effectiveYRes - 1 - y;
-            HAL_flashRead((uint32_t)buffer + sizeof(struct EepromImageHeader) + (y * (epd->effectiveXRes / 8)), line, (epd->effectiveXRes / 8));
+            if (mirrorV) {
+                uint8_t *dbuffer = (uint8_t *)malloc(widthBytes);
+                HAL_flashRead((uint32_t)buffer + sizeof(struct EepromImageHeader) + (y * (epd->effectiveXRes / 8)), dbuffer, (epd->effectiveXRes / 8));
+                reverseBytes(dbuffer, widthBytes);
+                memcpy(line, dbuffer, widthBytes);
+                free(dbuffer);
+            } else {
+                HAL_flashRead((uint32_t)buffer + sizeof(struct EepromImageHeader) + (y * (epd->effectiveXRes / 8)), line, (epd->effectiveXRes / 8));
+            }
            break;
        case DRAW_EEPROM_2BPP:
-            if (epd->drawDirectionRight)
+            if (mirrorH)
                y = epd->effectiveYRes - 1 - y;
-            HAL_flashRead((uint32_t)(buffer + sizeof(struct EepromImageHeader) + ((y + (c * epd->effectiveYRes)) * (epd->effectiveXRes / 8))), line, (epd->effectiveXRes / 8));
+            if (mirrorV) {
+                uint8_t *dbuffer = (uint8_t *)malloc(widthBytes);
+                HAL_flashRead((uint32_t)(buffer + sizeof(struct EepromImageHeader) + ((y + (c * epd->effectiveYRes)) * (epd->effectiveXRes / 8))), dbuffer, (epd->effectiveXRes / 8));
+                reverseBytes(dbuffer, widthBytes);
+                memcpy(line, dbuffer, widthBytes);
+                free(dbuffer);
+            } else {
+                HAL_flashRead((uint32_t)(buffer + sizeof(struct EepromImageHeader) + ((y + (c * epd->effectiveYRes)) * (epd->effectiveXRes / 8))), line, (epd->effectiveXRes / 8));
+            }
            break;
        default:
            printf("DRAW: Not supported mode!\n");
@@ -642,6 +674,16 @@ bool drawItem::addToList() {
    return false;
 }

+void drawItem::checkBounds() {
+    drawnWidthBytes = widthBytes;
+
+    // if(!direction){ // draw X lines
+    uint8_t availBytesWidth = epd->effectiveXRes / 8;
+    availBytesWidth -= (xpos / 8);
+    if (widthBytes < availBytesWidth) availBytesWidth = widthBytes;
+    drawnWidthBytes = availBytesWidth;
+}
+
 drawItem::~drawItem() {
    if (cleanUp) {
        switch (this->type) {
@@ -936,5 +978,6 @@ void fontrender::epdPrintf(uint16_t x, uint16_t y, bool color, enum rotation ro,
    di->xpos = x;
    di->color = color;
    di->type = drawItem::drawType::DRAW_FONT;
+    di->checkBounds();
    di->addToList();
 }
--- a/ARM_Tag_FW/common/drawing.h
+++ b/ARM_Tag_FW/common/drawing.h
@@ -72,6 +72,8 @@ class drawItem {
    static void renderDrawLine(uint8_t *line, uint16_t number, uint8_t c);
    static void flushDrawItems();

+    void checkBounds();
+
    // these are also used for rotated screens
    static void reverseBytes(uint8_t *src, uint8_t src_len);
    static uint8_t bitReverse(uint8_t byte);
@@ -113,6 +115,7 @@ class drawItem {
    void getXLine(uint8_t *line, uint16_t yPos, uint8_t color);
    void getYLine(uint8_t *line, uint16_t xPos, uint8_t color);
    uint8_t widthBytes = 0;
+    uint8_t drawnWidthBytes = 0;
    uint8_t *buffer = nullptr;
 };

--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/md5.c
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/md5.c
--- a/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/md5.h
+++ b/ARM_Tag_FW/88MZ100_OpenEpaperLink_7.4/md5.h
--- a/ARM_Tag_FW/common/oepl-protocol.cpp
+++ b/ARM_Tag_FW/common/oepl-protocol.cpp
@@ -23,8 +23,6 @@ volatile uint8_t PERSISTENTVAR currentChannel = 0;
 static uint8_t inBuffer[128] = {0};
 static uint8_t outBuffer[128] = {0};

-extern void executeCommand(uint8_t cmd);  // this is defined in main.c
-
 // tools
 static uint8_t getPacketType(const void *buffer) {
    const struct MacFcs *fcs = (MacFcs *)buffer;
@@ -112,7 +110,7 @@ uint8_t detectAP(const uint8_t channel) {
    radioRxEnable(true);
    for (uint8_t c = 1; c <= MAXIMUM_PING_ATTEMPTS; c++) {
        sendPing();
-        t = millis() + (HAL_TIMER_TICK * (PING_REPLY_WINDOW));
+        t = millis() + PING_REPLY_WINDOW;
        while (millis() < t) {
            int8_t ret = HAL_PacketRX(inBuffer);
            if (ret > 1) {
@@ -126,7 +124,7 @@ uint8_t detectAP(const uint8_t channel) {
                    }
                }
            }
-            HAL_msDelay(1);
+            HAL_msDelay(10);
        }
    }
    return 0;
@@ -179,7 +177,7 @@ struct AvailDataInfo *getAvailDataInfo() {
    uint32_t t;
    for (uint8_t c = 0; c < DATA_REQ_MAX_ATTEMPTS; c++) {
        sendAvailDataReq();
-        t = millis() + (HAL_TIMER_TICK * (DATA_REQ_RX_WINDOW_SIZE));
+        t = millis() + DATA_REQ_RX_WINDOW_SIZE;
        while (millis() < t) {
            int8_t ret = HAL_PacketRX(inBuffer);
            if (ret > 1) {
@@ -203,8 +201,7 @@ struct AvailDataInfo *getShortAvailDataInfo() {
    uint32_t t;
    for (uint8_t c = 0; c < DATA_REQ_MAX_ATTEMPTS; c++) {
        sendShortAvailDataReq();
-        // sendAvailDataReq();
-        t = millis() + (HAL_TIMER_TICK * (DATA_REQ_RX_WINDOW_SIZE));
+        t = millis() + DATA_REQ_RX_WINDOW_SIZE;
        while (millis() < t) {
            int8_t ret = HAL_PacketRX(inBuffer);
            if (ret > 1) {
@@ -251,7 +248,7 @@ static bool blockRxLoop(const uint32_t timeout, uint8_t *blockbuffer) {
    uint32_t t;
    bool success = false;
    radioRxEnable(true);
-    t = millis() + (HAL_TIMER_TICK * (timeout + 20));
+    t = millis() + (timeout + 20);

    bool blockComplete = false;

@@ -316,16 +313,17 @@ static struct blockRequestAck *performBlockRequest() {
    uint32_t t;
    radioRxEnable(true);
    radioRxFlush();
-    for (uint8_t c = 0; c < 30; c++) {
+    for (uint8_t c = 0; c < 10; c++) {
        sendBlockRequest();
-        t = millis() + (HAL_TIMER_TICK * ((7UL + c / 10)));
+        t = millis() + 6UL;
        do {
            int8_t ret = HAL_PacketRX(inBuffer);
            if (ret > 1) {
                switch (getPacketType(inBuffer)) {
                    case PKT_BLOCK_REQUEST_ACK:
-                        if (checkCRC((inBuffer + sizeof(struct MacFrameNormal) + 1), sizeof(struct blockRequestAck)))
+                        if (checkCRC((inBuffer + sizeof(struct MacFrameNormal) + 1), sizeof(struct blockRequestAck))) {
                            return (struct blockRequestAck *)(inBuffer + sizeof(struct MacFrameNormal) + 1);
+                        }
                        break;
                    case PKT_BLOCK_PART:
                        return continueToRX();
@@ -370,7 +368,7 @@ static void sendXferComplete() {
    for (uint8_t c = 0; c < 16; c++) {
        sendXferCompletePacket();
        uint32_t start = millis();
-        while ((millis() - start) < (HAL_TIMER_TICK * (6UL))) {
+        while ((millis() - start) < (6UL)) {
            int8_t ret = HAL_PacketRX(inBuffer);
            if (ret > 1) {
                if (getPacketType(inBuffer) == PKT_XFER_COMPLETE_ACK) {
@@ -591,7 +589,7 @@ static uint8_t *getDataBlock(const uint16_t blockSize) {
        }

 #ifdef FWNRF
-        doSleep(ack->pleaseWaitMs + 40);
+        doSleep(ack->pleaseWaitMs);
        powerUp(INIT_UART | INIT_RADIO);
        radioRxEnable(true);
 #endif
@@ -656,8 +654,8 @@ static uint8_t *getDataBlock(const uint16_t blockSize) {
 }

 static uint32_t downloadFWUpdate(const struct AvailDataInfo *avail) {
-    uint16_t dataRequestSize = 0;
-    uint32_t curXferSize = 0;
+    static uint32_t PERSISTENTVAR curXferSize = 0;
+
    // check if we already started the transfer of this information & haven't completed it
    if (!memcmp((const void *)&avail->dataVer, (const void *)&xferDataInfo.dataVer, 8) && xferDataInfo.dataSize) {
        // looks like we did. We'll carry on where we left off.
@@ -672,6 +670,7 @@ static uint32_t downloadFWUpdate(const struct AvailDataInfo *avail) {
    }

    while (xferDataInfo.dataSize) {
+        uint16_t dataRequestSize = 0;
        wdt10s();
        if (xferDataInfo.dataSize > BLOCK_DATA_SIZE) {
            // more than one block remaining
@@ -709,8 +708,8 @@ static uint32_t downloadFWUpdate(const struct AvailDataInfo *avail) {
 }

 static bool downloadImageDataToEEPROM(const struct AvailDataInfo *avail) {
-    uint16_t dataRequestSize = 0;
-    uint32_t curXferSize = 0;
+    static uint32_t PERSISTENTVAR curXferSize = 0;
+
    powerUp(INIT_EEPROM);
    // check if we already started the transfer of this information & haven't completed it
    if (!memcmp((const void *)&avail->dataVer, (const void *)&xferDataInfo.dataVer, 8) && xferDataInfo.dataSize) {
@@ -772,6 +771,7 @@ static bool downloadImageDataToEEPROM(const struct AvailDataInfo *avail) {
    }

    while (xferDataInfo.dataSize) {
+        uint16_t dataRequestSize = 0;
        wdt10s();
        if (xferDataInfo.dataSize > BLOCK_DATA_SIZE) {
            // more than one block remaining
@@ -828,6 +828,15 @@ static bool downloadImageDataToEEPROM(const struct AvailDataInfo *avail) {
 bool processImageDataAvail(struct AvailDataInfo *avail) {
    struct imageDataTypeArgStruct arg = *((struct imageDataTypeArgStruct *)avail->dataTypeArgument);

+    // check if the size sent can be contained in the image slot
+    if (avail->dataSize > tag.imageSize) {
+        printf("PROTO: Unable to save image, it's too big!\n");
+        powerUp(INIT_RADIO);
+        sendXferComplete();
+        powerDown(INIT_RADIO);
+        return false;
+    }
+
    if (arg.preloadImage) {
 #ifdef DEBUG_PROTO
        printf("PROTO: Preloading image with type 0x%02X from arg 0x%02X\n", arg.specialType, avail->dataTypeArgument);
--- a/ESP32_AP-Flasher/data/languages.json
+++ b/ESP32_AP-Flasher/data/languages.json
@@ -61,5 +61,26 @@
    "days": [ "Dimanche", "Lundi", "Mardi", "Mercredi", "Jeudi", "Vendredi", "Samedi" ],
    "months": [ "Janvier", "Février", "Mars", "Avril", "Mai", "Juin", "Juillet", "Aout", "Septembre", "Octobre", "Novembre", "Decembre" ],
    "date_format": [ "%d-%m-%Y", "%d-%m" ]
+  },
+    "9": {
+    "language": "sv",
+    "daysShort": [ "SÖ", "MÅ", "TI", "ON", "TO", "FR", "LÖ" ],
+    "days": [ "Söndag", "Måndag", "Tisdag", "Onsdag", "Torsdag", "Fredag", "Lördag" ],
+    "months": [ "Januari", "Februari", "Mars", "April", "Maj", "Juni", "Juli", "Augusti", "September", "Oktober", "November", "December" ],
+    "date_format": [ "%d-%m-%Y", "%d-%m" ]
+  },
+  "10": {
+    "language": "dk",
+    "daysShort": [ "SØ", "MA", "TI", "ON", "TO", "FR", "LØ" ],
+    "days": [ "Søndag", "Mandag", "Tirsdag", "Onsdag", "Torsdag", "Fredag", "Lørdag" ],
+    "months": [ "Januar", "Februar", "Marts", "April", "Maj", "Juni", "Juli", "August", "September", "Oktober", "November", "December" ],
+    "date_format": [ "%d-%m-%Y", "%d-%m" ]
+  },
+  "11": {
+    "language": "et",
+    "daysShort": [ "P", "E", "T", "K", "N", "R", "L" ],
+    "days": [ "Pühapäev", "Esmaspäev", "Teisipäev", "Kolmapäev", "Neljapäev", "Reede", "Laupäev" ],
+    "months": [ "Jaanuar", "Veebruar", "Märts", "Aprill", "Mai", "Juuni", "Juuli", "August", "September", "Oktoober", "November", "Detsember" ],
+    "date_format": [ "%d-%m-%Y", "%d-%m" ]
  }
 }
--- a/ESP32_AP-Flasher/data/tagtypes/11.json
+++ b/ESP32_AP-Flasher/data/tagtypes/11.json
@@ -13,6 +13,6 @@
 	},
 	"shortlut": 0,
 	"options": ["button"],
-	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 14, 15, 16, 17, 18, 19, 20, 21],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 14, 15, 16, 17, 18, 19, 20, 21, 27],
 	"usetemplate": 1		
 }
--- a/ESP32_AP-Flasher/data/tagtypes/22.json
+++ b/ESP32_AP-Flasher/data/tagtypes/22.json
@@ -0,0 +1,18 @@
+{
+	"name": "M2 2.7\"",
+	"width": 264,
+	"height": 176,
+		"rotatebuffer": 1,
+	"bpp": 2,
+	"colors": 3,
+	"colortable": {
+		"white": [255, 255, 255],
+		"black": [0, 0, 0],
+		"red": [255, 0, 0],
+		"gray": [150, 150, 150]
+	},
+	"shortlut": 0,
+	"options": ["button"],
+    "contentids": [ 0, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20],
+    "usetemplate": 1
+}
--- a/ESP32_AP-Flasher/data/tagtypes/26.json
+++ b/ESP32_AP-Flasher/data/tagtypes/26.json
@@ -0,0 +1,57 @@
+{
+	"name": "M2 7.5\" BW",
+	"width": 640,
+	"height": 384,
+	"rotatebuffer": 0,
+	"bpp": 1,
+	"colors": 2,
+	"colortable": {
+		"white": [255, 255, 255],
+		"black": [0, 0, 0]
+	},
+	"shortlut": 1,
+	"zlib_compression": "27",
+	"highlight_color": 5,
+	"options": [],
+	"contentids": [ 22, 23, 1, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20],
+	"template": {
+		"1": {
+			"weekday": [ 320, -5, "Signika-SB.ttf", 100 ],
+			"month": [ 320, 265, "Signika-SB.ttf", 100 ],
+			"day": [ 320, 60, "Signika-SB.ttf", 220 ]
+		},
+		"4": {
+			"location": [ 20, 20, "fonts/calibrib30" ],
+			"wind": [ 90, 83, "fonts/calibrib30" ],
+			"temp": [ 20, 170, "fonts/calibrib30" ],
+			"icon": [ 385, 0, 100, 2 ],
+			"dir": [ 40, 50, 80 ],
+			"umbrella": [ 325, 155, 78 ]
+		},
+		"8": {
+			"location": [ 10, 10, "fonts/calibrib30" ],
+			"column": [ 6, 66 ],
+			"day": [ 33, 60, "fonts/bahnschrift20", 104, 230 ],
+			"rain": [ 34, 260 ],
+			"icon": [ 32, 145, 30 ],
+			"wind": [ 17, 90 ],
+			"line": [ 50, 300 ]
+		},
+		"9": {
+			"title": [ 6, 0, "Signika-SB.ttf", 32 ],
+			"items": 5,
+			"line": [ 9, 40, "calibrib16.vlw" ],
+			"desc": [ 2, 8, "REFSAN12.vlw", 1.2 ]
+		},
+		"10": {
+			"title": [ 320, 10, "fonts/bahnschrift20" ],
+			"pos": [ 320, 40 ]
+		},
+		"11": {
+			"rotate": 0,
+			"mode": 1,
+			"days": 7,
+			"gridparam": [ 3, 17, 30, "calibrib16.vlw", "BellCent10.vlw", 14 ]
+		}
+	}
+}
--- a/ESP32_AP-Flasher/data/tagtypes/2E.json
+++ b/ESP32_AP-Flasher/data/tagtypes/2E.json
@@ -1,20 +1,21 @@
 {
- "name": "M3 9.7\"",
- "width": 960,
- "height": 672,
- "rotatebuffer": 0,
- "bpp": 2,
- "colors": 3,
- "colortable": {
-  "white": [255, 255, 255],
-  "black": [0, 0, 0],
-  "red": [255, 0, 0],
-  "gray": [150, 150, 150]
- },
- "shortlut": 0,
- "options": ["button"],
- "contentids": [ 22, 23, 1, 5, 8, 9, 7, 19, 10, 11 ],
- "usetemplate": 1,
+	"name": "M3 9.7\"",
+	"width": 960,
+	"height": 672,
+	"rotatebuffer": 2,
+	"bpp": 2,
+	"colors": 3,
+	"colortable": {
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
+	},
+	"shortlut": 0,
+	"zlib_compression": "27",
+	"options": [ "button" ],
+	"contentids": [ 22, 23, 1, 5, 8, 9, 7, 19, 10, 11 ],
+	"usetemplate": 1,
 	"template": {
 		"1": {
 			"weekday": [ 480, -5, "Signika-SB.ttf", 160 ],
@@ -37,5 +38,5 @@
 			"days": 7,
 			"gridparam": [ 7, 19, 30, "calibrib16.vlw", "REFSAN12.vlw", 16 ]
 		}
-	}	
+	}
 }
--- a/ESP32_AP-Flasher/data/tagtypes/2F.json
+++ b/ESP32_AP-Flasher/data/tagtypes/2F.json
@@ -2,19 +2,20 @@
 	"name": "M3 4.3\"",
 	"width": 522,
 	"height": 152,
-	"rotatebuffer": 1,
+	"rotatebuffer": 3,
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
-	"options": ["button"],
- "contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 11, 17, 18, 19, 20, 27],
- "usetemplate": 1,
+	"zlib_compression": "27",
+	"options": [ "button" ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 11, 17, 18, 19, 20, 27 ],
+	"usetemplate": 1,
 	"template": {
 		"1": {
 			"weekday": [ 160, 5, "Signika-SB.ttf", 60 ],
--- a/ESP32_AP-Flasher/data/tagtypes/30.json
+++ b/ESP32_AP-Flasher/data/tagtypes/30.json
@@ -6,13 +6,14 @@
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
-	"options": ["button"],
- "contentids": [ 22, 23, 1, 2, 3, 4, 8, 7, 19, 10, 21 ],
- "usetemplate": 0
+	"zlib_compression": "27",
+	"options": [ "button" ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 8, 7, 19, 10, 21 ],
+	"usetemplate": 0
 }
--- a/ESP32_AP-Flasher/data/tagtypes/31.json
+++ b/ESP32_AP-Flasher/data/tagtypes/31.json
@@ -2,22 +2,23 @@
 	"name": "M3 2.2\"",
 	"width": 296,
 	"height": 160,
-	"rotatebuffer": 1,
+	"rotatebuffer": 3,
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
-	"options": ["button", "led"],
-	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26],
+	"zlib_compression": "27",
+	"options": [ "button", "led" ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26 ],
 	"template": {
 		"1": {
-			"weekday": [148, 5, "Signika-SB.ttf", 60],
-			"date": [148, 75, "Signika-SB.ttf", 50]
+			"weekday": [ 148, 5, "Signika-SB.ttf", 60 ],
+			"date": [ 148, 75, "Signika-SB.ttf", 50 ]
 		},
 		"2": {
 			"fonts": [ "Signika-SB.ttf", 150, 150, 110, 80, 60, 50 ],
@@ -30,20 +31,20 @@
 			"bars": [ 5, 141, 10 ]
 		},
 		"4": {
-			"location": [5, 5, "fonts/bahnschrift30"],
-			"wind": [280, 5, "fonts/bahnschrift30"],
-			"temp": [5, 65, "fonts/bahnschrift70"],
-			"icon": [285, 20, 70, 2],
-			"dir": [245, -12, 40],
-			"umbrella": [190, -50, 25]
+			"location": [ 5, 5, "fonts/bahnschrift30" ],
+			"wind": [ 280, 5, "fonts/bahnschrift30" ],
+			"temp": [ 5, 65, "fonts/bahnschrift70" ],
+			"icon": [ 285, 20, 70, 2 ],
+			"dir": [ 245, -12, 40 ],
+			"umbrella": [ 190, -50, 25 ]
 		},
 		"8": {
-			"location": [5, 12, "t0_14b_tf"],
-			"column": [5, 59],
-			"day": [30, 18, "fonts/twcondensed20", 41, 108],
-			"icon": [30, 55, 30],
-			"wind": [18, 26],
-			"line": [20, 128]
+			"location": [ 5, 12, "t0_14b_tf" ],
+			"column": [ 5, 59 ],
+			"day": [ 30, 18, "fonts/twcondensed20", 41, 108 ],
+			"icon": [ 30, 55, 30 ],
+			"wind": [ 18, 26 ],
+			"line": [ 20, 128 ]
 		},
 		"9": {
 			"title": [ 5, 4, "bahnschrift20.vlw", 25 ],
@@ -52,8 +53,8 @@
 			"desc": [ 0, 5, "", 1 ]
 		},
 		"10": {
-			"title": [149, 5, "fonts/bahnschrift20"],
-			"pos": [149, 30]
+			"title": [ 149, 5, "fonts/bahnschrift20" ],
+			"pos": [ 149, 30 ]
 		},
 		"11": {
 			"mode": 0,
--- a/ESP32_AP-Flasher/data/tagtypes/32.json
+++ b/ESP32_AP-Flasher/data/tagtypes/32.json
@@ -0,0 +1,18 @@
+{
+	"name": "M3 2.6\"",
+	"width": 360,
+	"height": 184,
+	"rotatebuffer": 3,
+	"bpp": 2,
+	"colors": 3,
+	"colortable": {
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
+	},
+	"shortlut": 0,
+	"zlib_compression": "27",
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26 ],
+ "usetemplate": 1
+}
--- a/ESP32_AP-Flasher/data/tagtypes/33.json
+++ b/ESP32_AP-Flasher/data/tagtypes/33.json
@@ -2,18 +2,19 @@
 	"name": "M3 2.9\"",
 	"width": 384,
 	"height": 168,
-	"rotatebuffer": 1,
+	"rotatebuffer": 3,
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
-	"options": ["button", "led"],
-	"contentids": [22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26, 27],
+	"zlib_compression": "27",
+	"options": [ "button", "led" ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26, 27 ],
 	"usetemplate": 1,
 	"template": {
 		"1": {
@@ -31,12 +32,12 @@
 			"bars": [ 5, 141, 14 ]
 		},
 		"8": {
-			"location": [5, 12, "t0_14b_tf"],
-			"column": [5, 76],
-			"day": [39, 23, "bahnschrift20.vlw", 48, 140],
-			"icon": [39, 65, 45],
-			"wind": [23, 26],
-			"line": [20, 168]
+			"location": [ 5, 12, "t0_14b_tf" ],
+			"column": [ 5, 76 ],
+			"day": [ 39, 23, "bahnschrift20.vlw", 48, 140 ],
+			"icon": [ 39, 65, 45 ],
+			"wind": [ 23, 26 ],
+			"line": [ 20, 168 ]
 		},
 		"9": {
 			"title": [ 5, 4, "bahnschrift20.vlw", 25 ],
@@ -56,12 +57,12 @@
 			"items": 10,
 			"red": [ 0, 21, 384, 16 ],
 			"line": [ 5, 23, 18, "calibrib16.vlw", 55 ]
-		},		
+		},
 		"27": {
 			"bars": [ 12, 360, 110, 20 ],
 			"time": [ "calibrib16.vlw" ],
 			"yaxis": [ "BellCent10.vlw", 1, 6 ],
 			"head": [ "calibrib30.vlw" ]
-		}	
+		}
 	}
 }
--- a/ESP32_AP-Flasher/data/tagtypes/34.json
+++ b/ESP32_AP-Flasher/data/tagtypes/34.json
@@ -6,13 +6,14 @@
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
-	"options": ["led"],
+	"zlib_compression": "27",
+	"options": [ "led" ],
 	"contentids": [ 22, 23, 1, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20 ],
 	"usetemplate": 2
 }
--- a/ESP32_AP-Flasher/data/tagtypes/35.json
+++ b/ESP32_AP-Flasher/data/tagtypes/35.json
@@ -12,6 +12,7 @@
 		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
+	"zlib_compression": "27",
 	"options": [ "led" ],
 	"contentids": [ 22, 23, 1, 4, 5, 8, 9, 7, 19, 10, 11 ],
 	"usetemplate": 1,
--- a/ESP32_AP-Flasher/data/tagtypes/36.json
+++ b/ESP32_AP-Flasher/data/tagtypes/36.json
@@ -6,13 +6,14 @@
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"shortlut": 0,
-	"options": ["button", "led"],
-	"contentids": [ 22, 23, 1, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20],
-	"usetemplate": 1
+	"zlib_compression": "27",
+	"options": [ "button", "led" ],
+	"contentids": [ 22, 23, 1, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20 ],
+	"usetemplate": 46
 }
--- a/ESP32_AP-Flasher/data/tagtypes/40.json
+++ b/ESP32_AP-Flasher/data/tagtypes/40.json
@@ -0,0 +1,18 @@
+{
+	"name": "M3 2.9\" FREEZER",
+	"width": 384,
+	"height": 168,
+	"rotatebuffer": 3,
+	"bpp": 1,
+	"colors": 2,
+	"colortable": {
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
+	},
+	"shortlut": 0,
+	"zlib_compression": "27",
+	"options": [ "button", "led" ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26, 27 ],
+	"usetemplate": 51
+}
--- a/ESP32_AP-Flasher/data/tagtypes/41.json
+++ b/ESP32_AP-Flasher/data/tagtypes/41.json
@@ -0,0 +1,19 @@
+{
+	"name": "M3 5.85\"",
+	"width": 792,
+	"height": 272,
+	"rotatebuffer": 0,
+	"bpp": 2,
+	"colors": 3,
+	"colortable": {
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
+	},
+	"shortlut": 0,
+	"zlib_compression": "27",
+	"options": [ ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26, 27 ],
+	"usetemplate": 51
+}
--- a/ESP32_AP-Flasher/data/tagtypes/42.json
+++ b/ESP32_AP-Flasher/data/tagtypes/42.json
@@ -0,0 +1,18 @@
+{
+	"name": "M3 5.85\" FREEZER",
+	"width": 792,
+	"height": 272,
+	"rotatebuffer": 0,
+	"bpp": 1,
+	"colors": 2,
+	"colortable": {
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
+	},
+	"shortlut": 0,
+	"zlib_compression": "27",
+	"options": [ ],
+	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 16, 17, 18, 19, 20, 26, 27 ],
+	"usetemplate": 51
+}
--- a/ESP32_AP-Flasher/data/tagtypes/55.json
+++ b/ESP32_AP-Flasher/data/tagtypes/55.json
@@ -0,0 +1,84 @@
+{
+	"name": "HS BWR 2.13\"",
+	"width": 256,
+	"height": 128,
+	"rotatebuffer": 1,
+	"bpp": 2,
+	"colors": 3,
+	"colortable": {
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
+	},
+	"shortlut": 0,
+	"options": [ "led" ],
+	"contentids": [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 19, 20, 21, 22, 23, 27 ],
+
+	"template": {
+		"1": {
+			"weekday": [ 128, 3, "Signika-SB.ttf", 50 ],
+			"date": [ 128, 62, "Signika-SB.ttf", 40 ]
+		},
+		"2": {
+			"fonts": [ "Signika-SB.ttf", 150, 150, 150, 115, 90, 70 ],
+			"xy": [ 128, 53 ]
+		},
+		"16": {
+			"location": [ 7, 15, "t0_14b_tf" ],
+			"title": [ 210, 11, "glasstown_nbp_tf" ],
+			"cols": [ 4, 121, 10, "glasstown_nbp_tf" ],
+			"bars": [ 10, 110, 8 ]
+		},
+		"4": {
+			"location": [ 5, 3, "fonts/bahnschrift30" ],
+			"wind": [ 245, 3, "fonts/bahnschrift30" ],
+			"temp": [ 10, 60, "fonts/bahnschrift70" ],
+			"icon": [ 240, 20, 70, 2 ],
+			"dir": [ 210, -12, 40 ],
+			"umbrella": [ 175, -50, 25 ]
+		},
+		"8": {
+			"location": [ 5, 12, "t0_14b_tf" ],
+			"column": [ 5, 51 ],
+			"day": [ 28, 18, "fonts/twcondensed20", 41, 108 ],
+			"icon": [ 28, 55, 30 ],
+			"wind": [ 18, 26 ],
+			"line": [ 20, 128 ]
+		},
+		"9": {
+			"title": [ 8, 2, "bahnschrift20.vlw", 25 ],
+			"items": 5,
+			"line": [ 8, 25, "REFSAN12.vlw" ],
+			"desc": [ 0, 5, "", 1 ]
+		},
+		"10": {
+			"title": [ 128, 2, "calibrib16.vlw" ],
+			"pos": [ 128, 16 ]
+		},
+		"11": {
+			"mode": 0,
+			"days": 1,
+			"title": [ 10, 2, "fonts/bahnschrift20" ],
+			"date": [ 245, 2 ],
+			"items": 7,
+			"red": [ 0, 21, 256, 14 ],
+			"line": [ 10, 32, 15, "t0_14b_tf", 50 ]
+		},
+		"21": [
+			{ "text": [ 10, 5, "OpenEpaperLink AP", "bahnschrift20", 1, 0, 0 ] },
+			{ "text": [ 10, 50, "IP address:", "t0_14b_tf", 1, 0, 0 ] },
+			{ "text": [ 110, 50, "{ap_ip}", "t0_14b_tf", 1, 0, 0 ] },
+			{ "text": [ 10, 70, "Channel:", "t0_14b_tf", 1, 0, 0 ] },
+			{ "text": [ 110, 70, "{ap_ch}", "t0_14b_tf", 1, 0, 0 ] },
+			{ "text": [ 10, 90, "Tag count:", "t0_14b_tf", 1, 0, 0 ] },
+			{ "text": [ 110, 90, "{ap_tagcount}", "t0_14b_tf", 1, 0, 0 ] }
+		],
+		"27": {
+			"bars": [ 26, 216, 80, 20 ],
+			"time": [ "BellCent10.vlw" ],
+			"yaxis": [ "BellCent10.vlw", 6, 6 ],
+			"head": [ "bahnschrift20.vlw" ]
+		}
+	}
+}
--- a/ESP32_AP-Flasher/data/tagtypes/B3.json
+++ b/ESP32_AP-Flasher/data/tagtypes/B3.json
@@ -6,76 +6,11 @@
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
 	"contentids": [ 22, 23, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 15, 16, 17, 18, 19, 20, 21, 27 ],
-	"template": {
-		"1": {
-			"weekday": [ 148, -3, "Signika-SB.ttf", 60 ],
-			"date": [ 148, 65, "Signika-SB.ttf", 48 ]
-		},
-		"2": {
-			"fonts": [ "Signika-SB.ttf", 150, 150, 150, 120, 100, 80 ],
-			"xy": [ 148, 53 ]
-		},
-		"16": {
-			"location": [ 5, 5, "fonts/bahnschrift30" ],
-			"title": [ 247, 11, "glasstown_nbp_tf" ],
-			"cols": [ 1, 125, 12, "glasstown_nbp_tf" ],
-			"bars": [ 5, 111, 10 ]
-		},
-		"4": {
-			"location": [5, 5, "fonts/bahnschrift30"],
-			"wind": [280, 5, "fonts/bahnschrift30"],
-			"temp": [5, 65, "fonts/bahnschrift70"],
-			"icon": [285, 20, 70, 2],
-			"dir": [235, -12, 40],
-			"umbrella": [190, -50, 25]
-		},
-		"8": {
-			"location": [5, 12, "t0_14b_tf"],
-			"column": [5, 59],
-			"day": [30, 18, "fonts/twcondensed20", 41, 108],
-			"icon": [30, 55, 30],
-			"wind": [18, 26],
-			"line": [20, 128]
-		},
-		"9": {
-			"title": [ 2, 0, "bahnschrift20.vlw", 25 ],
-			"items": 8,
-			"line": [ 1, 25, "REFSAN12.vlw" ],
-			"desc": [ 0, 5, "", 1 ]
-		},
-		"10": {
-			"title": [149, 5, "fonts/bahnschrift20"],
-			"pos": [149, 27]
-		},
-		"11": {
-			"mode": 0,
-			"days": 1,
-			"title": [5, 2, "fonts/bahnschrift20"],
-			"date": [290, 2],
-			"items": 7,
-			"red": [0, 21, 296, 14],
-			"line": [5, 32, 15, "t0_14b_tf", 50]
-		},
-		"21": [
-			{ "text": [ 5, 5, "OpenEpaperLink AP", "bahnschrift20", 1, 0, 0 ] },
-			{ "text": [ 5, 50, "IP address:", "t0_14b_tf", 1, 0, 0 ] },
-			{ "text": [ 120, 50, "{ap_ip}", "t0_14b_tf", 1, 0, 0 ] },
-			{ "text": [ 5, 70, "Channel:", "t0_14b_tf", 1, 0, 0 ] },
-			{ "text": [ 120, 70, "{ap_ch}", "t0_14b_tf", 1, 0, 0 ] },
-			{ "text": [ 5, 90, "Tag count:", "t0_14b_tf", 1, 0, 0 ] },
-			{ "text": [ 120, 90, "{ap_tagcount}", "t0_14b_tf", 1, 0, 0 ] }
-		],
-		"27": {
-			"bars": [ 9, 288, 90, 10 ],
-			"time": [ "BellCent10.vlw" ],
-			"yaxis": [ "BellCent10.vlw", 0, 6 ],
-			"head": [ "calibrib30.vlw" ]
- 	}
-	}
+	"usetemplate": 1
 }
--- a/ESP32_AP-Flasher/data/tagtypes/B5.json
+++ b/ESP32_AP-Flasher/data/tagtypes/B5.json
@@ -6,50 +6,11 @@
 	"bpp": 2,
 	"colors": 3,
 	"colortable": {
-		"white": [255, 255, 255],
-		"black": [0, 0, 0],
-		"red": [255, 0, 0],
-		"gray": [150, 150, 150]
+		"white": [ 255, 255, 255 ],
+		"black": [ 0, 0, 0 ],
+		"red": [ 255, 0, 0 ],
+		"gray": [ 150, 150, 150 ]
 	},
-	"contentids": [ 22, 23, 1, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20],
-	"template": {
-		"1": {
-			"weekday": [ 200, 0, "Signika-SB.ttf", 70 ],
-			"month": [ 200, 210, "Signika-SB.ttf", 70 ],
-			"day": [ 200, 45, "Signika-SB.ttf", 170 ]
-		},
-		"4": {
-			"location": [ 20, 20, "fonts/calibrib30" ],
-			"wind": [ 90, 83, "fonts/calibrib50" ],
-			"temp": [ 20, 170, "fonts/calibrib100" ],
-			"icon": [ 385, 0, 100, 2 ],
-			"dir": [ 40, 50, 80 ],
-			"umbrella": [ 325, 155, 78 ]
-		},
-		"8": {
-			"location": [ 10, 10, "fonts/calibrib30" ],
-			"column": [ 6, 66 ],
-			"day": [ 33, 60, "fonts/bahnschrift20", 104, 230 ],
-			"rain": [ 34, 260 ],
-			"icon": [ 32, 145, 30 ],
-			"wind": [ 17, 90 ],
-			"line": [ 50, 300 ]
-		},
-		"9": {
-			"title": [ 6, 0, "Signika-SB.ttf", 25 ],
-			"items": 4,
-			"line": [ 9, 40, "calibrib16.vlw" ],
-			"desc": [ 2, 8, "REFSAN12.vlw", 1.2 ]
-		},
-		"10": {
-			"title": [ 200, 10, "fonts/bahnschrift20" ],
-			"pos": [ 200, 35 ]
-		},
-		"11": {
-			"rotate": 0,
-			"mode": 1,
-			"days": 4,
-			"gridparam": [ 5, 17, 20, "calibrib16.vlw", "BellCent10.vlw", 14 ]
-		}
-	}
+	"contentids": [ 22, 23, 1, 4, 5, 7, 8, 9, 10, 11, 17, 18, 19, 20 ],
+	"usetemplate": 2
 }
--- a/ESP32_AP-Flasher/data/www/content_cards.json.gz
+++ b/ESP32_AP-Flasher/data/www/content_cards.json.gz
--- a/ESP32_AP-Flasher/data/www/edit.html.gz
+++ b/ESP32_AP-Flasher/data/www/edit.html.gz
--- a/ESP32_AP-Flasher/data/www/flash.js.gz
+++ b/ESP32_AP-Flasher/data/www/flash.js.gz
--- a/ESP32_AP-Flasher/data/www/index.html.gz
+++ b/ESP32_AP-Flasher/data/www/index.html.gz
--- a/ESP32_AP-Flasher/data/www/main.js.gz
+++ b/ESP32_AP-Flasher/data/www/main.js.gz
--- a/ESP32_AP-Flasher/data/www/ota.js.gz
+++ b/ESP32_AP-Flasher/data/www/ota.js.gz
--- a/ESP32_AP-Flasher/data/www/setup.js.gz
+++ b/ESP32_AP-Flasher/data/www/setup.js.gz
--- a/ESP32_AP-Flasher/include/tag_db.h
+++ b/ESP32_AP-Flasher/include/tag_db.h
@@ -54,6 +54,7 @@ class tagRecord {

 struct Config {
    uint8_t channel;
+    uint8_t subghzchannel;
    char alias[32];
    uint8_t led;
    uint8_t tft;
--- a/ESP32_AP-Flasher/lib/miniz-oepl/miniz-oepl.cpp
+++ b/ESP32_AP-Flasher/lib/miniz-oepl/miniz-oepl.cpp
@@ -1,3 +1,5 @@
+#include <Arduino.h>
+
 #include "miniz-oepl.h"

 #include <stdio.h>
@@ -226,7 +228,7 @@ int mz_deflateInit2(mz_streamp pStream, int level, int method, int window_bits,

    pStream->state = (struct mz_internal_state *)pComp;

-    if (tdefl_init(pComp, NULL, NULL, comp_flags) != TDEFL_STATUS_OKAY)
+    if (tdefl_initOEPL(pComp, NULL, NULL, comp_flags) != TDEFL_STATUS_OKAY)
    {
        mz_deflateEnd(pStream);
        return MZ_PARAM_ERROR;
@@ -240,7 +242,7 @@ int mz_deflateReset(mz_streamp pStream)
    if ((!pStream) || (!pStream->state) || (!pStream->zalloc) || (!pStream->zfree))
        return MZ_STREAM_ERROR;
    pStream->total_in = pStream->total_out = 0;
-    tdefl_init((tdefl_compressor *)pStream->state, NULL, NULL, ((tdefl_compressor *)pStream->state)->m_flags);
+    tdefl_initOEPL((tdefl_compressor *)pStream->state, NULL, NULL, ((tdefl_compressor *)pStream->state)->m_flags);
    return MZ_OK;
 }

@@ -269,7 +271,7 @@ int mz_deflate(mz_streamp pStream, int flush)
        in_bytes = pStream->avail_in;
        out_bytes = pStream->avail_out;

-        defl_status = tdefl_compress((tdefl_compressor *)pStream->state, pStream->next_in, &in_bytes, pStream->next_out, &out_bytes, (tdefl_flush)flush);
+        defl_status = tdefl_compressOEPL((tdefl_compressor *)pStream->state, pStream->next_in, &in_bytes, pStream->next_out, &out_bytes, (tdefl_flush)flush);
        pStream->next_in += (mz_uint)in_bytes;
        pStream->avail_in -= (mz_uint)in_bytes;
        pStream->total_in += (mz_uint)in_bytes;
@@ -1591,7 +1593,9 @@ static mz_bool tdefl_compress_fast(tdefl_compressor *d)
                if (!probe_len)
                    cur_match_len = cur_match_dist ? TDEFL_MAX_MATCH_LEN : 0;

-                if ((cur_match_len < TDEFL_MIN_MATCH_LEN) || ((cur_match_len == TDEFL_MIN_MATCH_LEN) && (cur_match_dist >= 8U * 1024U)))
+// fixme: hardcoded 8*1024
+//                if ((cur_match_len < TDEFL_MIN_MATCH_LEN) || ((cur_match_len == TDEFL_MIN_MATCH_LEN) && (cur_match_dist >= 8U * 1024U)))
+                if ((cur_match_len < TDEFL_MIN_MATCH_LEN) || ((cur_match_len == TDEFL_MIN_MATCH_LEN) && (cur_match_dist >= 4U * 1024U)))
                {
                    cur_match_len = 1;
                    *pLZ_code_buf++ = (mz_uint8)first_trigram;
@@ -1924,8 +1928,9 @@ static tdefl_status tdefl_flush_output_buffer(tdefl_compressor *d)
    return (d->m_finished && !d->m_output_flush_remaining) ? TDEFL_STATUS_DONE : TDEFL_STATUS_OKAY;
 }

-tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush)
+tdefl_status tdefl_compressOEPL(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush)
 {
+    Serial.println("tdefl_compress");
    if (!d)
    {
        if (pIn_buf_size)
@@ -1995,11 +2000,12 @@ tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pI
 tdefl_status tdefl_compress_buffer(tdefl_compressor *d, const void *pIn_buf, size_t in_buf_size, tdefl_flush flush)
 {
    MZ_ASSERT(d->m_pPut_buf_func);
-    return tdefl_compress(d, pIn_buf, &in_buf_size, NULL, NULL, flush);
+    return tdefl_compressOEPL(d, pIn_buf, &in_buf_size, NULL, NULL, flush);
 }

-tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags)
+tdefl_status tdefl_initOEPL(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags)
 {
+    Serial.println("tdefl_init");
    d->m_pPut_buf_func = pPut_buf_func;
    d->m_pPut_buf_user = pPut_buf_user;
    d->m_flags = (mz_uint)(flags);
@@ -2053,7 +2059,7 @@ mz_bool tdefl_compress_mem_to_output(const void *pBuf, size_t buf_len, tdefl_put
    pComp = (tdefl_compressor *)MZ_MALLOC(sizeof(tdefl_compressor));
    if (!pComp)
        return MZ_FALSE;
-    succeeded = (tdefl_init(pComp, pPut_buf_func, pPut_buf_user, flags) == TDEFL_STATUS_OKAY);
+    succeeded = (tdefl_initOEPL(pComp, pPut_buf_func, pPut_buf_user, flags) == TDEFL_STATUS_OKAY);
    succeeded = succeeded && (tdefl_compress_buffer(pComp, pBuf, buf_len, TDEFL_FINISH) == TDEFL_STATUS_DONE);
    MZ_FREE(pComp);
    return succeeded;
@@ -2171,7 +2177,7 @@ void *tdefl_write_image_to_png_file_in_memory_ex(const void *pImage, int w, int
    for (z = 41; z; --z)
        tdefl_output_buffer_putter(&z, 1, &out_buf);
    /* compress image data */
-    tdefl_init(pComp, tdefl_output_buffer_putter, &out_buf, s_tdefl_png_num_probes[MZ_MIN(10, level)] | TDEFL_WRITE_ZLIB_HEADER);
+    tdefl_initOEPL(pComp, tdefl_output_buffer_putter, &out_buf, s_tdefl_png_num_probes[MZ_MIN(10, level)] | TDEFL_WRITE_ZLIB_HEADER);
    for (y = 0; y < h; ++y)
    {
        tdefl_compress_buffer(pComp, &z, 1, TDEFL_NO_FLUSH);
--- a/ESP32_AP-Flasher/lib/miniz-oepl/miniz-oepl.h
+++ b/ESP32_AP-Flasher/lib/miniz-oepl/miniz-oepl.h
@@ -149,7 +149,7 @@ namespace Miniz {
 /*#define MINIZ_NO_ZLIB_APIS */

 /* Define MINIZ_NO_ZLIB_COMPATIBLE_NAME to disable zlib names, to prevent conflicts against stock zlib. */
-/*#define MINIZ_NO_ZLIB_COMPATIBLE_NAMES */
+#define MINIZ_NO_ZLIB_COMPATIBLE_NAMES

 /* Define MINIZ_NO_MALLOC to disable all calls to malloc, free, and realloc. 
   Note if MINIZ_NO_MALLOC is defined then the user must always provide custom user alloc/free/realloc
@@ -316,7 +316,7 @@ enum
 };

 /* Window bits */
-#define MZ_DEFAULT_WINDOW_BITS 15
+#define MZ_DEFAULT_WINDOW_BITS 12

 struct mz_internal_state;

@@ -797,10 +797,10 @@ typedef struct
 /* pBut_buf_func: If NULL, output data will be supplied to the specified callback. In this case, the user should call the tdefl_compress_buffer() API for compression. */
 /* If pBut_buf_func is NULL the user should always call the tdefl_compress() API. */
 /* flags: See the above enums (TDEFL_HUFFMAN_ONLY, TDEFL_WRITE_ZLIB_HEADER, etc.) */
-MINIZ_EXPORT tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
+MINIZ_EXPORT tdefl_status tdefl_initOEPL(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);

 /* Compresses a block of data, consuming as much of the specified input buffer as possible, and writing as much compressed data to the specified output buffer as possible. */
-MINIZ_EXPORT tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush);
+MINIZ_EXPORT tdefl_status tdefl_compressOEPL(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush);

 /* tdefl_compress_buffer() is only usable when the tdefl_init() is called with a non-NULL tdefl_put_buf_func_ptr. */
 /* tdefl_compress_buffer() always consumes the entire input buffer. */
--- a/ESP32_AP-Flasher/platformio.ini
+++ b/ESP32_AP-Flasher/platformio.ini
@@ -59,7 +59,6 @@ build_flags =
 	-D BOARD_HAS_PSRAM
 	-D SAVE_SPACE
 	-D POWER_NO_SOFT_POWER
-	-D SAVE_SPACE
 	-D FLASHER_AP_SS=11
 	-D FLASHER_AP_CLK=9
 	-D FLASHER_AP_MOSI=10
@@ -199,7 +198,6 @@ build_flags =
 	-D FLASHER_AP_TXD=17
 	-D FLASHER_AP_RXD=16
 	-D FLASHER_LED=22
-	-D SAVE_SPACE
 build_src_filter = 
 	+<*>-<usbflasher.cpp>-<swd.cpp>-<espflasher.cpp>-<ips_display.cpp>-<webflasher.cpp>
 ; ----------------------------------------------------------------------------------------
--- a/ESP32_AP-Flasher/src/contentmanager.cpp
+++ b/ESP32_AP-Flasher/src/contentmanager.cpp
@@ -82,7 +82,6 @@ void contentRunner() {
            if (minutesUntilNextUpdate > 1 && (wsClientCount() == 0 || config.stopsleep == 0)) {
                taginfo->pendingIdle = minutesUntilNextUpdate * 60;
                if (taginfo->isExternal == false) {
-                    Serial.printf("sleeping for %d more minutes\n", minutesUntilNextUpdate);
                    prepareIdleReq(taginfo->mac, minutesUntilNextUpdate);
                }
            }
@@ -1186,7 +1185,7 @@ bool getCalFeed(String &filename, JsonObject &cfgobj, tagRecord *&taginfo, imgPa
        int temp = imageParams.height;
        imageParams.height = imageParams.width;
        imageParams.width = temp;
-        imageParams.rotatebuffer = 1 - imageParams.rotatebuffer;
+        imageParams.rotatebuffer = 1 - (imageParams.rotatebuffer%2);
        initSprite(spr, imageParams.width, imageParams.height, imageParams);
    } else {
        initSprite(spr, imageParams.width, imageParams.height, imageParams);
@@ -2085,7 +2084,7 @@ void rotateBuffer(uint8_t rotation, uint8_t &currentOrientation, TFT_eSprite &sp
            initSprite(spr, sprCpy.width(), sprCpy.height(), imageParams);
            sprCpy.pushToSprite(&spr, 0, 0);
            sprCpy.deleteSprite();
-            imageParams.rotatebuffer = 1 - imageParams.rotatebuffer;
+            imageParams.rotatebuffer = 1 - (imageParams.rotatebuffer%2);
        }
        currentOrientation = rotation;
    }
--- a/ESP32_AP-Flasher/src/language.cpp
+++ b/ESP32_AP-Flasher/src/language.cpp
@@ -17,7 +17,7 @@ int currentLanguage = 0;

 void updateLanguageFromConfig() {
    int tempLang = config.language;
-    if (tempLang < 0 || tempLang > 8) {
+    if (tempLang < 0 || tempLang > 11) {
        Serial.println("Language not supported");
        return;
    }
--- a/ESP32_AP-Flasher/src/main.cpp
+++ b/ESP32_AP-Flasher/src/main.cpp
@@ -147,6 +147,8 @@ void setup() {
 #ifdef HAS_USB
    // We'll need to start the 'usbflasher' task for boards with a second (USB) port. This can be used as a 'flasher' interface, using a python script on the host
    xTaskCreate(usbFlasherTask, "usbflasher", 10000, NULL, 5, NULL);
+#else
+    pinMode(0, INPUT_PULLUP);
 #endif

 #ifdef HAS_EXT_FLASHER
--- a/ESP32_AP-Flasher/src/makeimage.cpp
+++ b/ESP32_AP-Flasher/src/makeimage.cpp
@@ -88,10 +88,16 @@ uint32_t colorDistance(Color &c1, Color &c2, Error &e1) {
 void spr2color(TFT_eSprite &spr, imgParam &imageParams, uint8_t *buffer, size_t buffer_size, bool is_red) {
    uint8_t rotate = imageParams.rotate;
    long bufw = spr.width(), bufh = spr.height();
-    if (imageParams.rotatebuffer) {
+
+    if (imageParams.rotatebuffer % 2) {
+        //turn the image 90 or 270
        rotate = (rotate + 3) % 4;
+        rotate = (rotate + (imageParams.rotatebuffer - 1)) % 4;
        bufw = spr.height();
        bufh = spr.width();
+    } else {
+        // rotate 180
+        rotate = (rotate + (imageParams.rotatebuffer)) % 4;
    }

    memset(buffer, 0, buffer_size);
@@ -234,8 +240,8 @@ size_t prepareHeader(uint8_t headerbuf[], uint16_t bufw, uint16_t bufh, imgParam
    uint8_t headersize = 6;

    headerbuf[0] = headersize;
-    memcpy(headerbuf + (imageParams.rotatebuffer == 1 ? 3 : 1), &bufw, sizeof(uint16_t));
-    memcpy(headerbuf + (imageParams.rotatebuffer == 1 ? 1 : 3), &bufh, sizeof(uint16_t));
+    memcpy(headerbuf + (imageParams.rotatebuffer % 2 == 1 ? 3 : 1), &bufw, sizeof(uint16_t));
+    memcpy(headerbuf + (imageParams.rotatebuffer % 2 == 1 ? 1 : 3), &bufh, sizeof(uint16_t));

    if (imageParams.hasRed && imageParams.bpp > 1) {
        totalbytes = buffer_size * 2 + headersize;
@@ -249,7 +255,7 @@ size_t prepareHeader(uint8_t headerbuf[], uint16_t bufw, uint16_t bufh, imgParam
 }

 bool initializeCompressor(Miniz::tdefl_compressor *comp, int flags) {
-    return Miniz::tdefl_init(comp, NULL, NULL, flags) == Miniz::TDEFL_STATUS_OKAY;
+    return Miniz::tdefl_initOEPL(comp, NULL, NULL, flags) == Miniz::TDEFL_STATUS_OKAY;
 }

 size_t compressAndWrite(Miniz::tdefl_compressor *comp, const void *inbuf, size_t inbytes, void *zlibbuf, size_t outsize, size_t totalbytes, File &f_out, Miniz::tdefl_flush flush) {
@@ -257,8 +263,8 @@ size_t compressAndWrite(Miniz::tdefl_compressor *comp, const void *inbuf, size_t
    size_t outbytes_compressed = outsize;

    uint32_t t = millis();
-    tdefl_compress(comp, inbuf, &inbytes_compressed, zlibbuf, &outbytes_compressed, flush);
-    Serial.printf("zlib: compressed %d into %d bytes in %d ms\n", inbytes_compressed, outbytes_compressed, millis()-t);
+    Miniz::tdefl_compressOEPL(comp, inbuf, &inbytes_compressed, zlibbuf, &outbytes_compressed, flush);
+    Serial.printf("zlib: compressed %d into %d bytes in %d ms\n", inbytes_compressed, outbytes_compressed, millis() - t);

    f_out.write((const uint8_t *)zlibbuf, outbytes_compressed);
    return outbytes_compressed;
@@ -266,7 +272,8 @@ size_t compressAndWrite(Miniz::tdefl_compressor *comp, const void *inbuf, size_t

 void rewriteHeader(File &f_out) {
    // https://www.rfc-editor.org/rfc/rfc1950
-    const uint8_t cmf = 0x48;
+    const uint8_t cmf = 0x48;  // 4096
+    // const uint8_t cmf = 0x58; // 8192
    uint8_t flg, flevel = 3;
    uint16_t header = cmf << 8 | (flevel << 6);
    header += 31 - (header % 31);
@@ -276,7 +283,6 @@ void rewriteHeader(File &f_out) {
    f_out.write(flg);
 }

-
 void spr2buffer(TFT_eSprite &spr, String &fileout, imgParam &imageParams) {
    long t = millis();

@@ -333,6 +339,7 @@ void spr2buffer(TFT_eSprite &spr, String &fileout, imgParam &imageParams) {

                f_out.write(reinterpret_cast<uint8_t *>(&totalbytes), sizeof(uint32_t));

+                // 768 = compression level 9, 1500 = unofficial level 10
                if (comp == NULL || zlibbuf == NULL || totalbytes == 0 || !initializeCompressor(comp, Miniz::TDEFL_WRITE_ZLIB_HEADER | 1500)) {
                    Serial.println("Failed to initialize compressor or allocate memory for zlib");
                    if (zlibbuf != NULL) free(zlibbuf);
@@ -348,10 +355,10 @@ void spr2buffer(TFT_eSprite &spr, String &fileout, imgParam &imageParams) {
                    compressAndWrite(comp, buffer, buffer_size, zlibbuf, buffer_size, buffer_size, f_out, Miniz::TDEFL_FINISH);
                }

-                rewriteHeader(f_out);
-
                free(zlibbuf);
                free(comp);
+
+                rewriteHeader(f_out);
            } else {
                f_out.write(buffer, buffer_size);
                if (imageParams.hasRed && imageParams.bpp > 1) {
--- a/ESP32_AP-Flasher/src/newproto.cpp
+++ b/ESP32_AP-Flasher/src/newproto.cpp
@@ -74,15 +74,15 @@ void prepareCancelPending(const uint8_t dst[8]) {
 }

 void prepareIdleReq(const uint8_t* dst, uint16_t nextCheckin) {
-    if (nextCheckin > 0) {
+    if (nextCheckin > 0 && countQueueItem(dst) == 0) {
        struct pendingData pending = {0};
        memcpy(pending.targetMac, dst, 8);
        pending.availdatainfo.dataType = DATATYPE_NOUPDATE;
        pending.availdatainfo.nextCheckIn = nextCheckin;
        pending.attemptsLeft = 10 + config.maxsleep;

-        Serial.printf(">SDA %02X%02X%02X%02X%02X%02X%02X%02X NOP\n", dst[7], dst[6], dst[5], dst[4], dst[3], dst[2], dst[1], dst[0]);
-        queueDataAvail(&pending, true);
+        Serial.printf(">SDA %02X%02X%02X%02X%02X%02X%02X%02X sleeping %d minutes\n", dst[7], dst[6], dst[5], dst[4], dst[3], dst[2], dst[1], dst[0], nextCheckin);
+        sendDataAvail(&pending);
    }
 }

@@ -209,6 +209,15 @@ bool prepareDataAvail(String& filename, uint8_t dataType, uint8_t dataTypeArgume
    file.close();
    uint16_t attempts = 60 * 24;

+    if (memcmp(md5bytes, taginfo->md5, 16) == 0) {
+        wsLog("new image is the same as current image. not updating tag.");
+        wsSendTaginfo(dst, SYNC_TAGSTATUS);
+        if (contentFS->exists(filename) && resend == false) {
+            contentFS->remove(filename);
+        }
+        return true;
+    }
+
    if (dataType != DATATYPE_FW_UPDATE) {
        char dst_path[64];
        sprintf(dst_path, "/current/%02X%02X%02X%02X%02X%02X%02X%02X_%lu.pending", dst[7], dst[6], dst[5], dst[4], dst[3], dst[2], dst[1], dst[0], millis() % 1000000);
@@ -440,7 +449,7 @@ void processXferComplete(struct espXferComplete* xfc, bool local) {
            if (config.preview && (queueItem->pendingdata.availdatainfo.dataType == DATATYPE_IMG_RAW_2BPP || queueItem->pendingdata.availdatainfo.dataType == DATATYPE_IMG_RAW_1BPP || queueItem->pendingdata.availdatainfo.dataType == DATATYPE_IMG_ZLIB)) {
                contentFS->rename(queueItem->filename, String(dst_path));
            } else {
-                contentFS->remove(queueItem->filename);
+                if (queueItem->pendingdata.availdatainfo.dataType != DATATYPE_FW_UPDATE) contentFS->remove(queueItem->filename);
            }
        }
        memcpy(md5bytes, &queueItem->pendingdata.availdatainfo.dataVer, sizeof(uint64_t));
@@ -508,10 +517,16 @@ void processDataReq(struct espAvailDataReq* eadr, bool local, IPAddress remoteIP
    }
    char buffer[64];

+    char hexmac[17];
+    mac2hex(eadr->src, hexmac);
+
    tagRecord* taginfo = tagRecord::findByMAC(eadr->src);
    if (taginfo == nullptr) {
        if (config.lock == 1 || (config.lock == 2 && eadr->adr.wakeupReason != WAKEUP_REASON_FIRSTBOOT)) return;
-        if (eadr->adr.currentChannel > 0 && eadr->adr.currentChannel != apInfo.channel) return;
+        if (eadr->adr.currentChannel > 0 && eadr->adr.currentChannel != apInfo.channel) {
+            Serial.printf("Tag %s reports illegal channel %d\n", hexmac, eadr->adr.currentChannel);
+            return;
+        }
        taginfo = new tagRecord;
        memcpy(taginfo->mac, eadr->src, sizeof(taginfo->mac));
        taginfo->pendingCount = 0;
@@ -520,9 +535,6 @@ void processDataReq(struct espAvailDataReq* eadr, bool local, IPAddress remoteIP
    time_t now;
    time(&now);

-    char hexmac[17];
-    mac2hex(eadr->src, hexmac);
-
    if (!local) {
        if (taginfo->isExternal == false) {
            wsLog("moved AP from local to external " + String(hexmac));
@@ -573,7 +585,7 @@ void processDataReq(struct espAvailDataReq* eadr, bool local, IPAddress remoteIP
        taginfo->temperature = eadr->adr.temperature;
        taginfo->batteryMv = eadr->adr.batteryMv;
        taginfo->hwType = eadr->adr.hwType;
-        if (eadr->adr.wakeupReason > 0) taginfo->wakeupReason = eadr->adr.wakeupReason;
+        taginfo->wakeupReason = eadr->adr.wakeupReason;
        taginfo->capabilities = eadr->adr.capabilities;
        taginfo->currentChannel = eadr->adr.currentChannel;
        taginfo->tagSoftwareVersion = eadr->adr.tagSoftwareVersion;
@@ -637,8 +649,11 @@ void setAPchannel() {
        udpsync.getAPList();
    } else {
        if (curChannel.channel != config.channel) {
-            curChannel.channel = config.channel;
-            sendChannelPower(&curChannel);
+           curChannel.channel = config.channel;
+#ifdef HAS_SUBGHZ
+           curChannel.subghzchannel = config.subghzchannel;
+#endif
+           sendChannelPower(&curChannel);
        }
    }
 }
--- a/ESP32_AP-Flasher/src/serialap.cpp
+++ b/ESP32_AP-Flasher/src/serialap.cpp
@@ -755,6 +755,9 @@ bool bringAPOnline() {
 }

 bool checkRadio() {
+#ifndef C6_OTA_FLASHING
+    return true;
+#endif
    // make a short between FLASHER_AP_TXD and FLASHER_AP_RXD to indicate that no radio is present
    // e.g. for flasher only, or just to use the S3 to generate images for smaller AP's
    pinMode(FLASHER_AP_TXD, OUTPUT);
--- a/ESP32_AP-Flasher/src/system.cpp
+++ b/ESP32_AP-Flasher/src/system.cpp
@@ -57,7 +57,10 @@ void logLine(const String& text) {
            contentFS->remove("/logold.txt");
            contentFS->rename("/log.txt", "/logold.txt");
            logFile = contentFS->open("/log.txt", "a");
-            if (!logFile) return;
+            if (!logFile) {
+                xSemaphoreGive(fsMutex);
+                return;
+            }
        }

        logFile.print(timeStr);
--- a/ESP32_AP-Flasher/src/tag_db.cpp
+++ b/ESP32_AP-Flasher/src/tag_db.cpp
@@ -315,6 +315,7 @@ void initAPconfig() {
        configFile.close();
    }
    config.channel = APconfig.containsKey("channel") ? APconfig["channel"] : 0;
+    config.subghzchannel = APconfig.containsKey("subghzchannel") ? APconfig["subghzchannel"] : 0;
    if (APconfig["alias"]) strlcpy(config.alias, APconfig["alias"], sizeof(config.alias));
    config.led = APconfig.containsKey("led") ? APconfig["led"] : 255;
    config.tft = APconfig.containsKey("tft") ? APconfig["tft"] : 255;
@@ -343,6 +344,7 @@ void saveAPconfig() {
    fs::File configFile = contentFS->open("/current/apconfig.json", "w");
    DynamicJsonDocument APconfig(500);
    APconfig["channel"] = config.channel;
+    APconfig["subghzchannel"] = config.subghzchannel;
    APconfig["alias"] = config.alias;
    APconfig["led"] = config.led;
    APconfig["tft"] = config.tft;
--- a/ESP32_AP-Flasher/src/web.cpp
+++ b/ESP32_AP-Flasher/src/web.cpp
@@ -492,7 +492,7 @@ void init_web() {
 #ifdef C6_OTA_FLASHING
        response->print("\"C6\": \"1\", ");
 #else
-        response->print("\"C6\": \"1\", ");
+        response->print("\"C6\": \"0\", ");
 #endif
 #ifdef SAVE_SPACE
        response->print("\"savespace\": \"1\", ");
@@ -509,6 +509,13 @@ void init_web() {
 #else
        response->print("\"hasBLE\": \"0\", ");
 #endif
+
+#ifdef HAS_SUBGHZ
+        response->print("\"hasSubGhz\": \"1\", ");
+#else
+        response->print("\"hasSubGhz\": \"0\", ");
+#endif
+
        response->print("\"apstate\": \"" + String(apInfo.state) + "\"");

        File configFile = contentFS->open("/current/apconfig.json", "r");
@@ -542,6 +549,9 @@ void init_web() {
        if (request->hasParam("channel", true)) {
            config.channel = static_cast<uint8_t>(request->getParam("channel", true)->value().toInt());
        }
+        if (request->hasParam("subghzchannel", true)) {
+            config.subghzchannel = static_cast<uint8_t>(request->getParam("subghzchannel", true)->value().toInt());
+        }
        if (request->hasParam("led", true)) {
            config.led = static_cast<uint8_t>(request->getParam("led", true)->value().toInt());
            updateBrightnessFromConfig();
--- a/ESP32_AP-Flasher/wwwroot/content_cards.json
+++ b/ESP32_AP-Flasher/wwwroot/content_cards.json
@@ -350,6 +350,8 @@
          "AT": "Austria",
          "BE": "Belgium",
          "CZ": "Czech Republic",
+          "DK1": "Denmark DK1",
+          "DK2": "Denmark DK2",
          "EE": "Estonia",
          "FI": "Finland",
          "FR": "France",
@@ -409,7 +411,7 @@
      {
        "key": "interval",
        "name": "Interval",
-        "desc": "In case of an url, wow often (in minutes) the template is being fetched. Minimum is 3 minutes.",
+        "desc": "In case of an url, how often (in minutes) the template is being fetched. Minimum is 3 minutes.",
        "type": "int"
      }
    ]
--- a/ESP32_AP-Flasher/wwwroot/edit.html
+++ b/ESP32_AP-Flasher/wwwroot/edit.html
@@ -435,7 +435,8 @@
 								}

 								[canvas.width, canvas.height] = [tagTypes[hwtype].width, tagTypes[hwtype].height] || [0, 0];
-								if (tagTypes[hwtype].rotatebuffer) [canvas.width, canvas.height] = [canvas.height, canvas.width];
+								if (tagTypes[hwtype].rotatebuffer%2) [canvas.width, canvas.height] = [canvas.height, canvas.width];
+								if (tagTypes[hwtype].rotatebuffer>=2) canvas.style.transform='rotate(180deg)'; 
 								const ctx = canvas.getContext('2d');
 								const imageData = ctx.createImageData(canvas.width, canvas.height);
 								if (data.length == 0) canvas.style.display = 'none';
--- a/ESP32_AP-Flasher/wwwroot/flash.js
+++ b/ESP32_AP-Flasher/wwwroot/flash.js
@@ -127,7 +127,7 @@ const fetchAndPost = async (url, name, path) => {
        formData.append('path', path);
        formData.append('file', fileContent, name);

-        const uploadResponse = await fetch('/littlefs_put', {
+        const uploadResponse = await fetch('littlefs_put', {
            method: 'POST',
            body: formData
        });
@@ -146,7 +146,7 @@ const fetchAndPost = async (url, name, path) => {

 async function checkTagFW() {
    const fwfile = "/Tag_FW_Pack.bin";
-    const url = "/check_file?path=" + encodeURIComponent(fwfile);
+    const url = "check_file?path=" + encodeURIComponent(fwfile);
    const response = await fetch(url);
    if (response.ok) {
        const data = await response.json();
--- a/ESP32_AP-Flasher/wwwroot/index.html
+++ b/ESP32_AP-Flasher/wwwroot/index.html
@@ -289,6 +289,24 @@ options:
 						<option value="27">27</option>
 					</select>
 				</p>
+                <p title="Enable SubGhz support and select channel. This requires an AP that has an optional CC1101 SubGhz radio module attached.">
+                    <label for="apcfgsubgigchid">SubGhz channel</label>
+                    <select id="apcfgsubgigchid">
+                        <option value="0" selected>disabled</option>
+                        <option value="100">100 - 864.000 Mhz (Europe, etc)</option>
+                        <option value="101">101 - 865.006 Mhz (Europe, etc)</option>
+                        <option value="102">102 - 866.014 Mhz (Europe, etc)</option>
+                        <option value="103">103 - 867.020 Mhz (Europe, etc)</option>
+                        <option value="104">104 - 868.027 Mhz (Europe, etc)</option>
+                        <option value="105">105 - 869.034 Mhz (Europe, etc)</option>
+                        <option value="200">200 - 903.000 Mhz (US, etc)</option>
+                        <option value="201">201 - 907.027 Mhz (US, etc)</option>
+                        <option value="202">202 - 911.054 Mhz (US, etc)</option>
+                        <option value="203">203 - 915.083 Mhz (US, etc)</option>
+                        <option value="204">204 - 919.110 Mhz (US, etc)</option>
+                        <option value="205">205 - 923.138 Mhz (US, etc)</option>
+                    </select>
+                </p>
 				<p title="Enable Bluetooth (BLE) support. Only enable this if you have BLE capable tags. Changing this value requires a reboot to take effect.">
 					<label for="apcfgble">Bluetooth</label>
 					<select id="apcfgble">
@@ -330,6 +348,9 @@ options:
 						<option value="6">SK Slovenčina</option>
 						<option value="7">PL Polski</option>
 						<option value="8">ES Español</option>
+						<option value="9">SV Svenska</option>
+						<option value="10">DK Dansk</option>
+						<option value="11">ET Eesti</option>
 					</select>
 				</p>
 				<p title="Depending on the content, a tag can sleep for
--- a/ESP32_AP-Flasher/wwwroot/main.js
+++ b/ESP32_AP-Flasher/wwwroot/main.js
@@ -44,7 +44,7 @@ let getTagtypeBusy = false;

 const loadConfig = new Event("loadConfig");
 window.addEventListener("loadConfig", function () {
-	fetch("/get_ap_config")
+	fetch("get_ap_config")
 		.then(response => response.json())
 		.then(data => {
 			apConfig = data;
@@ -53,17 +53,20 @@ window.addEventListener("loadConfig", function () {
 				$(".logo").innerHTML = data.alias;
 				this.document.title = data.alias;
 			}
-			if (data.C6) {
+			if (data.C6 == 1) {
 				var optionToRemove = $("#apcfgchid").querySelector('option[value="27"]');
 				if (optionToRemove) $("#apcfgchid").removeChild(optionToRemove);
 				$('#c6Option').style.display = 'block';
 			}
-			if (data.hasFlasher) {
+			if (data.hasFlasher == 1) {
 				$('[data-target="flashtab"]').style.display = 'block';
 			}
 			if (data.hasBLE == 0) {
 				$("#apcfgble").parentNode.style.display = 'none';
 			}
+      if (data.hasSubGhz == 0) {
+        $("#apcfgsubgigchid").parentNode.style.display = 'none';
+      }
 			if (data.savespace) {
 			}
 			if (data.apstate) {
@@ -77,7 +80,7 @@ window.addEventListener("loadConfig", function () {
 window.addEventListener("load", function () {
 	window.dispatchEvent(loadConfig);
 	initTabs();
-	fetch('/content_cards.json')
+	fetch('content_cards.json')
 		.then(response => response.json())
 		.then(data => {
 			cardconfig = data;
@@ -133,7 +136,7 @@ function initTabs() {
 };

 function loadTags(pos) {
-	return fetch("/get_db?pos=" + pos)
+	return fetch("get_db?pos=" + pos)
 		.then(response => response.json())
 		.then(data => {
 			processTags(data.tags);
@@ -169,7 +172,7 @@ function formatUptime(seconds) {

 function connect() {
 	protocol = location.protocol == "https:" ? "wss://" : "ws://";
-	socket = new WebSocket(protocol + location.host + "/ws");
+	socket = new WebSocket(protocol + location.host + location.pathname + "ws");

 	socket.addEventListener("open", (event) => {
 		showMessage("websocket connected");
@@ -309,7 +312,7 @@ function processTags(tagArray) {
 						if (element.isexternal && element.contentMode == 12) {
 							loadImage(tagmac, 'http://' + tagDB[tagmac].apip + '/current/' + tagmac + '.raw?' + cachetag);
 						} else {
-							loadImage(tagmac, '/current/' + tagmac + '.raw?' + cachetag);
+							loadImage(tagmac, 'current/' + tagmac + '.raw?' + cachetag);
 						}
 					} else {
 						$('#tag' + tagmac + ' .tagimg').style.display = 'none'
@@ -497,7 +500,7 @@ $('#taglist').addEventListener("click", (event) => {
 function loadContentCard(mac) {
 	$('#cfgmac').innerHTML = mac;
 	$('#cfgmac').dataset.mac = mac;
-	fetch("/get_db?mac=" + mac)
+	fetch("get_db?mac=" + mac)
 		.then(response => response.json())
 		.then(data => {
 			const tagdata = data.tags[0];
@@ -570,7 +573,7 @@ $('#cfgsave').onclick = function () {
 	formData.append("lut", $('#cfglut').value);
 	formData.append("invert", $('#cfginvert').value);

-	fetch("/save_cfg", {
+	fetch("save_cfg", {
 		method: "POST",
 		body: formData
 	})
@@ -587,7 +590,7 @@ function sendCmd(mac, cmd) {
 	let formData = new FormData();
 	formData.append("mac", mac);
 	formData.append("cmd", cmd);
-	fetch("/tag_cmd", {
+	fetch("tag_cmd", {
 		method: "POST",
 		body: formData
 	})
@@ -655,7 +658,7 @@ $('#cfgautoupdate').onclick = async function () {
 		var fullFilename = name + "_" + version + ".bin";
 		var filepath = "/" + fullFilename;
 		var binurl = "https://raw.githubusercontent.com/" + repo + "/master/binaries/Tag/" + fullFilename;
-		var url = "/check_file?path=" + encodeURIComponent(filepath);
+		var url = "check_file?path=" + encodeURIComponent(filepath);
 		var response = await fetch(url);
 		if (response.ok) {
 			var data = await response.json();
@@ -666,7 +669,7 @@ $('#cfgautoupdate').onclick = async function () {
 					var formData2 = new FormData();
 					formData2.append('path', filepath);
 					formData2.append('file', fileContent, fullFilename);
-					var uploadResponse = await fetch('/littlefs_put', {
+					var uploadResponse = await fetch('littlefs_put', {
 						method: 'POST',
 						body: formData2
 					});
@@ -690,7 +693,7 @@ $('#cfgautoupdate').onclick = async function () {
 		else showMessage('Error: auto update failed', true);
 		formData.append("contentmode", 5);
 		formData.append("modecfgjson", JSON.stringify(obj));
-		fetch("/save_cfg", {
+		fetch("save_cfg", {
 			method: "POST",
 			body: formData
 		})
@@ -705,7 +708,7 @@ $('#rebootbutton').onclick = function (event) {
 	event.preventDefault();
 	if (!confirm('Reboot AP now?')) return;
 	socket.close();
-	fetch("/reboot", {
+	fetch("reboot", {
 		method: "POST"
 	});
 	alert('Rebooted. Webpage will reload.');
@@ -723,13 +726,14 @@ document.addEventListener("loadTab", function (event) {
 	switch (event.detail) {
 		case 'configtab':
 		case 'aptab':
-			fetch("/get_ap_config")
+			fetch("get_ap_config")
 				.then(response => response.json())
 				.then(data => {
-					if (data.alias) {
+					if (data && 'alias' in data) {
 						apConfig = data;
 						$('#apcfgalias').value = data.alias;
 						$('#apcfgchid').value = data.channel;
+            $('#apcfgsubgigchid').value = data.subghzchannel;
 						$('#apcfgble').value = data.ble;
 						$("#apcfgledbrightness").value = data.led;
 						$("#apcfgtftbrightness").value = data.tft;
@@ -765,6 +769,7 @@ $('#apcfgsave').onclick = function () {
 	let formData = new FormData();
 	formData.append("alias", $('#apcfgalias').value);
 	formData.append("channel", $('#apcfgchid').value);
+  formData.append("subghzchannel", $('#apcfgsubgigchid').value);
 	formData.append('ble', $('#apcfgble').value);
 	formData.append('led', $('#apcfgledbrightness').value);
 	formData.append('tft', $('#apcfgtftbrightness').value);
@@ -778,7 +783,7 @@ $('#apcfgsave').onclick = function () {
 	formData.append('sleeptime1', $('#apcnight1').value);
 	formData.append('sleeptime2', $('#apcnight2').value);

-	fetch("/save_apcfg", {
+	fetch("save_apcfg", {
 		method: "POST",
 		body: formData
 	})
@@ -796,7 +801,7 @@ $('#uploadButton').onclick = function () {
 	if (file) {
 		const formData = new FormData();
 		formData.append('file', file);
-		fetch('/restore_db', {
+		fetch('restore_db', {
 			method: 'POST',
 			body: formData
 		})
@@ -834,7 +839,7 @@ $('#restoreFromLocal').onclick = function () {
 		const formData = new FormData();
 		formData.append('file', blob, 'tagResult.json');

-		fetch('/restore_db', {
+		fetch('restore_db', {
 			method: 'POST',
 			body: formData
 		})
@@ -938,7 +943,7 @@ function contentselected() {
 				case 'binfile':
 				case 'jsonfile':
 					input = document.createElement("select");
-					fetch('/edit?list=%2F&recursive=1')
+					fetch('edit?list=%2F&recursive=1')
 						.then(response => response.json())
 						.then(data => {
 							let files = data.filter(item => item.type === "file" && item.name.endsWith(".jpg"));
@@ -1133,7 +1138,8 @@ function processQueue() {
 			}

 			[canvas.width, canvas.height] = [tagTypes[hwtype].width, tagTypes[hwtype].height] || [0, 0];
-			if (tagTypes[hwtype].rotatebuffer) [canvas.width, canvas.height] = [canvas.height, canvas.width];
+			if (tagTypes[hwtype].rotatebuffer%2) [canvas.width, canvas.height] = [canvas.height, canvas.width];
+			if (tagTypes[hwtype].rotatebuffer>=2) canvas.style.transform='rotate(180deg)';
 			const ctx = canvas.getContext('2d');
 			const imageData = ctx.createImageData(canvas.width, canvas.height);
 			if (data.length == 0) {
@@ -1186,6 +1192,8 @@ function processZlib(data) {
 	const subBuffer = data.subarray(4);
 	try {
 		const inflatedBuffer = pako.inflate(subBuffer);
+		// to constrain window size for testing:
+		// const inflatedBuffer = pako.inflate(subBuffer, { windowBits: 12 });
 		const headerSize = inflatedBuffer[0];
 		return inflatedBuffer.subarray(headerSize);
 	} catch (err) {
@@ -1354,7 +1362,7 @@ async function getTagtype(hwtype) {
 	try {
 		getTagtypeBusy = true;
 		tagTypes[hwtype] = { busy: true };
-		const response = await fetch('/tagtypes/' + hwtype.toString(16).padStart(2, '0').toUpperCase() + '.json');
+		const response = await fetch('tagtypes/' + hwtype.toString(16).padStart(2, '0').toUpperCase() + '.json');
 		if (!response.ok) {
 			let data = { name: 'unknown id ' + hwtype.toString(16), width: 0, height: 0, bpp: 0, rotatebuffer: 0, colortable: [], busy: false };
 			tagTypes[hwtype] = data;
@@ -1445,7 +1453,7 @@ function dropUpload() {
 						formData.append('file', blob, 'image.jpg');

 						try {
-							const response = await fetch('/imgupload', {
+							const response = await fetch('imgupload', {
 								method: 'POST',
 								body: formData,
 							});
@@ -1475,7 +1483,7 @@ function dropUpload() {
 				const formData = new FormData();
 				formData.append('mac', mac);
 				formData.append('json', jsonContent);
-				fetch('/jsonupload', {
+				fetch('jsonupload', {
 					method: 'POST',
 					body: formData,
 				})
@@ -1607,7 +1615,7 @@ function populateAPCard(msg) {

 function populateAPInfo(apip) {
 	let apid = apip.replace(/\./g, "-");
-	fetch('http://' + apip + '/sysinfo')
+	fetch('sysinfo')
 		.then(response => {
 			if (response.status != 200) {
 				$('#ap' + apid + ' .apswversion').innerHTML = "Error fetching sysinfo: " + response.status;
--- a/ESP32_AP-Flasher/wwwroot/ota.js
+++ b/ESP32_AP-Flasher/wwwroot/ota.js
@@ -10,7 +10,7 @@ let buttonState = false;

 export async function initUpdate() {

-    const response = await fetch("/version.txt");
+    const response = await fetch("version.txt");
    let filesystemversion = await response.text();
    if (!filesystemversion) filesystemversion = "unknown";
    $('#repo').value = repo;
@@ -30,7 +30,7 @@ export async function initUpdate() {
    $('#selectRepo').style.display = 'inline-block';
    $('#repoWarning').style.display = 'none';

-    const sysinfoPromise = fetch("/sysinfo")
+    const sysinfoPromise = fetch("sysinfo")
        .then(response => {
            if (response.status != 200) {
                print("Error fetching sysinfo: " + response.status, "red");
@@ -167,7 +167,7 @@ export async function updateWebpage(fileUrl, tagname, showReload) {

                print("Updating littleFS partition...");

-                fetch("http://openepaperlink.eu/getupdate/?url=" + fileUrl)
+                fetch("//openepaperlink.eu/getupdate/?url=" + fileUrl)
                    .then(response => response.json())
                    .then(data => {
                        checkfiles(data);
@@ -181,7 +181,7 @@ export async function updateWebpage(fileUrl, tagname, showReload) {
                    if (updateactions) {
                        await fetchAndPost(updateactions.url, updateactions.name, updateactions.path);
                        try {
-                            const response = await fetch("/update_actions", {
+                            const response = await fetch("update_actions", {
                                method: "POST",
                                body: ''
                            });
@@ -200,7 +200,7 @@ export async function updateWebpage(fileUrl, tagname, showReload) {
                    for (const file of files) {
                        try {
                            if (file.name != "update_actions.json") {
-                                const url = "/check_file?path=" + encodeURIComponent(file.path);
+                                const url = "check_file?path=" + encodeURIComponent(file.path);
                                const response = await fetch(url);
                                if (response.ok) {
                                    const data = await response.json();
@@ -271,7 +271,7 @@ export async function updateESP(fileUrl, showConfirm) {

    while (retryCount < maxRetries) {
        try {
-            const response = await fetch("http://openepaperlink.eu/getupdate/?url=" + fileUrl + "&env=" + env);
+            const response = await fetch("//openepaperlink.eu/getupdate/?url=" + fileUrl + "&env=" + env);
            const responseBody = await response.text();
            if (!response.ok) {
                throw new Error("Network response was not OK: " + responseBody);
@@ -290,7 +290,7 @@ export async function updateESP(fileUrl, showConfirm) {
                console.log(`URL for "${file.name}": ${binurl}`);

                try {
-                    const response = await fetch('/update_ota', {
+                    const response = await fetch('update_ota', {
                        method: 'POST',
                        headers: {
                            'Content-Type': 'application/x-www-form-urlencoded'
@@ -342,7 +342,7 @@ $('#rollbackBtn').onclick = function () {

    print("Rolling back...");

-    fetch("/rollback", {
+    fetch("rollback", {
        method: "POST",
        body: ''
    })
@@ -365,7 +365,7 @@ $('#updateC6Btn').onclick = function () {
    const formData = new FormData();
    formData.append('download', isChecked ? '1' : '0'); // Convert to '1' or '0'

-    fetch("/update_c6", {
+    fetch("update_c6", {
        method: "POST",
        body: formData
    })
@@ -389,7 +389,7 @@ $('#selectRepo').onclick = function (event) {
                const filesJsonAsset = assets.find(asset => asset.name === 'filesystem.json');
                const binariesJsonAsset = assets.find(asset => asset.name === 'binaries.json');
                if (filesJsonAsset && binariesJsonAsset) {
-                    const updateUrl = "http://openepaperlink.eu/getupdate/?url=" + binariesJsonAsset.browser_download_url + "&env=" + $('#repo').value;
+                    const updateUrl = "//openepaperlink.eu/getupdate/?url=" + binariesJsonAsset.browser_download_url + "&env=" + $('#repo').value;
                    return fetch(updateUrl);
                } else {
                    throw new Error("Json file binaries.json and/or filesystem.json not found in the release assets");
@@ -443,7 +443,7 @@ $('#confirmSelectRepo').onclick = function (event) {
    let formData = new FormData();
    formData.append("repo", repo);
    formData.append("env", $('#environment').value);
-    fetch("/save_apcfg", {
+    fetch("save_apcfg", {
        method: "POST",
        body: formData
    })
@@ -478,7 +478,7 @@ export function print(line, color = "white") {

 export function reboot() {
    print("Rebooting now... Reloading webpage in 5 seconds...", "yellow");
-    fetch("/reboot", { method: "POST" });
+    fetch("reboot", { method: "POST" });
    setTimeout(() => {
        location.reload();
    }, 5000);
@@ -520,7 +520,7 @@ const fetchAndPost = async (url, name, path) => {
        formData.append('path', path);
        formData.append('file', fileContent, name);

-        const uploadResponse = await fetch('/littlefs_put', {
+        const uploadResponse = await fetch('littlefs_put', {
            method: 'POST',
            body: formData
        });
@@ -544,7 +544,7 @@ const writeVersion = async (content, name, path) => {
        const blob = new Blob([content]);
        formData.append('file', blob, name);

-        const uploadResponse = await fetch('/littlefs_put', {
+        const uploadResponse = await fetch('littlefs_put', {
            method: 'POST',
            body: formData
        });
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Nic Limper	d2c2963b3b	gzipped files	2024-03-04 21:40:15 +01:00
Nic Limper	a5d7282958	update tagtypes for M3 0027 firmware	2024-03-04 19:46:17 +01:00
jjwbruijn	f233d90b86	M3 Universal v0027	2024-03-04 19:04:15 +01:00
Nic Limper	739625f1c8	Squashed commit of the following: commit `d41ab4b27c` Author: Nic Limper <nic@xs4all.nl> Date: Mon Mar 4 13:16:15 2024 +0100 remove subghz in platformio.ini commit `dfa1a5cecd` Author: Nic Limper <nic@xs4all.nl> Date: Mon Mar 4 13:15:14 2024 +0100 Revert "Disable SubGhz support until C6 side is ready." This reverts commit `3bc96dc48e`. commit `cdd26072fd` Author: Nic Limper <nic@xs4all.nl> Date: Mon Mar 4 13:14:46 2024 +0100 Revert "Merge remote-tracking branch 'mine/oepl_pr_1' into oepl_pr_1" This reverts commit `39b1938263`, reversing changes made to `3bc96dc48e`. commit `39b1938263` Merge: `3bc96dc4` `2b62dff5` Author: Skip Hansen <skip@gfrn.org> Date: Mon Mar 4 03:54:35 2024 -0800 Merge remote-tracking branch 'mine/oepl_pr_1' into oepl_pr_1 commit `3bc96dc48e` Author: Skip Hansen <skip@gfrn.org> Date: Mon Mar 4 03:43:12 2024 -0800 Disable SubGhz support until C6 side is ready. commit `2b62dff5f5` Author: Nic Limper <nic@xs4all.nl> Date: Mon Mar 4 11:44:06 2024 +0100 fix gzip wwwfiles to prevent unchanged gzipped files showing up in the commit commit `0864870540` Author: Skip Hansen <skip@gfrn.org> Date: Sun Mar 3 16:46:53 2024 -0800 Added SubGhz channel support to AP Web GUI.	2024-03-04 13:21:58 +01:00
Jan-Henrik Bruhn	b527d3e57d	Fix openepaperlink.eu proxy on https proxies (#251 )	2024-03-04 12:03:55 +01:00
Cougar	ba82ab8628	Add Estonian language (#254 )	2024-03-04 11:51:49 +01:00
Jelmer	085a642ed2	New M3 types by VstudioLAB	2024-03-04 11:39:45 +01:00
jjwbruijn	e2870825cf	88MZ100 v0028 - bugfix and commands	2024-03-03 21:56:00 +01:00
jjwbruijn	a4bdb4acab	FW Pack for autoflasher	2024-03-02 12:13:05 +01:00
Jelmer	058016d208	Update tagotaversions.json	2024-03-02 02:58:30 +01:00
Jelmer	b14cd3909c	Update tagotaversions.json - test	2024-03-02 02:40:14 +01:00
jjwbruijn	cd09a53e02	v0027 M2 ZBS Binaries	2024-03-02 02:09:27 +01:00
jjwbruijn	6bdf99a8e7	v0027 M2 ZBS243, fixes inadvertent redraw	2024-03-01 14:02:37 +01:00
Jelmer	1b256c3fba	Create README.md	2024-03-01 01:41:27 +01:00
Jelmer	ec217a94d0	Merge branch 'master' of https://github.com/jjwbruijn/OpenEPaperLink	2024-03-01 01:29:34 +01:00
Jelmer	2b99ce7139	MiniAP V3 Case	2024-03-01 01:29:26 +01:00
Nic Limper	f6a8fa3d4d	added Dansk (thanks Cokeman), added Nebular 213 templates, removed flasher icon in S2 based AP's	2024-02-29 17:37:35 +01:00
Jelmer	294ed5bd28	Create README.md	2024-02-29 17:08:54 +01:00
Jelmer	92c5d60cf8	Nano C6 case	2024-02-29 16:59:54 +01:00
leXorNet	7ca5461c33	Increased language count cap from 8 to 9 to support the latest language (#250 )	2024-02-29 00:19:49 +01:00
Jelmer	aebbb22cde	Update oepl-definitions.h	2024-02-28 20:03:10 +01:00
Nic Limper	14e96c72f7	bugfix miniAP doesn't display channel 27	2024-02-28 08:16:47 +01:00
Nic Limper	ebd1adc0d5	gzipped www files	2024-02-28 01:20:37 +01:00
Nic Limper	f4cb642142	add Denmark to dayahead electricity prices; enable it also for 2.9" UC8151	2024-02-28 01:11:01 +01:00
Nic Limper	9b2d76a6b6	bugfix: idlereq should not be queued, and only sent when queue is empty	2024-02-28 01:09:00 +01:00
leXorNet	ac979a3c52	Added Swedish content language (#245 )	2024-02-27 12:11:13 +01:00
Jan-Henrik Bruhn	a606c4c1aa	Use relative paths for fetch calls and websocket (#243 ) This allows the OEPL Frontend to be put behind a reverse proxy like Home Assistant Ingress to proxy it behind a relative path.	2024-02-27 01:47:36 +01:00
Jelmer	c22fe0d91b	Merge pull request #241 from TheRealMrSteel/patch-1 Update content_cards.json	2024-02-27 00:37:42 +01:00
Jelmer	b29907a725	Merge pull request #242 from VstudioLAB/M3_58-26-29FREEZER M3 58 26 29 freezer	2024-02-27 00:36:03 +01:00
Jelmer	8da475901d	Support for rotating generated images based on tagtype profile	2024-02-27 00:32:09 +01:00
Vstudio LAB	e4ed0b13db	Delete ARM_Tag_FW/Newton_M3_nRF52811/$PROJECT_DIR directory	2024-02-26 22:55:48 +01:00
VstudioLAB	0ffd0fbf0e	Update .gitignore	2024-02-26 22:49:03 +01:00
Steel	1cba70b9cc	Update content_cards.json typo in id19	2024-02-26 22:47:50 +01:00
VstudioLAB	6b67f6df2b	updates	2024-02-26 22:24:48 +01:00
Nic Limper	b9fe72de5c	small bugfixes	2024-02-26 20:58:46 +01:00
Nic Limper	c458c6b29c	bugfix: config screen is not populated when alias is empty	2024-02-26 11:47:56 +01:00
jjwbruijn	d3b9abf56a	M2 7.5" v0027 fw	2024-02-26 01:27:40 +01:00
Jelmer	d2b17b7a97	added M2 7.5" BW tag type	2024-02-25 23:10:40 +01:00
Nic Limper	7e3e73a064	bugfix: no flasher-only detection on tag-based AP	2024-02-25 21:39:28 +01:00
Jelmer	9ca9007a1c	Update oepl-definitions.h	2024-02-25 19:57:20 +01:00
Nic Limper	b03ad07179	bugfix, AP always reported C6 present	2024-02-25 15:26:01 +01:00
Nic Limper	56537e46be	dirty fix for zlib compression The miniz is used for zlib compression. But because that library has some bugs related to a smal window sizes (we need 4096), I had to make some patches to the library. The miniz library happens to also be part of esp-idf. To distinguish between our version and the esp-idf version, I created a `namespace Miniz` around our version. But nevertheless, the esp-idf version is called when I'm calling Miniz::tdefl_init and Miniz::tdefl_compress . Why?? Anyway, renamed tdefl_init and tdefl_compress to tdefl_initOEPL and tdefl_compressOEPL to get it working. This is ugly. If somebody has a better solution, please let me know!	2024-02-25 14:45:03 +01:00
VstudioLAB	f83667bcce	Added support for the 2.6 BWR	2024-02-15 13:25:58 +01:00
VstudioLAB	bee51a23b6	5.85" Initial support and general preparation for BW only compatibility.	2024-02-15 00:09:25 +01:00
VstudioLAB	a787ac6ddf	M3 5.85" cleanning	2024-02-14 22:09:50 +01:00
VstudioLAB	5561f82bf6	Original commit (5.85" BWR only) First commit of that branch. At the moment, only the M3 5.85" is added, but not finished.	2024-02-14 21:39:36 +01:00
VstudioLAB	b07eeb31ce	initial commit	2024-02-14 00:56:38 +01:00