Files
OpenEPaperLink/ESP32_AP-Flasher/include/wifimanager.h
Frank Kunz f311239c9c Add new AP hardware support OpenEPaperLink_ESP32-PoE-ISO_AP (#431)
* Fix filesystem mutex handling

This fixes the re-initialization of the filesystem mutex when the dyn storage
module is reinitialized. Using xSemaphoreCreateMutex would cause a memory leak
when the begin function is called multiple times and a semaphore leakage could
be caused by the re-initialization of the global fsMutex variable while the
semaphore is taken.

The fsMutex should not be taken while the logLine function is called as this
would cause a nested take of the fsMutex, which causes a deadlock.

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Fix hard coded littlefs in json upload

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Add new AP hardware support OpenEPaperLink_ESP32-PoE-ISO_AP

This is based on Olimex ESP32-PoE-ISO
https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/open-source-hardware

It has a SD Card slot that is used to store all filesystem data on SD.
Use the prepare_sdcard.sh script to copy all needed data to an empty
SD card that is formatted with FAT filesystem. The AP firmware will format
the SD if an unformatted or from formatted card is used. This can be used
to intially prepare an empty SD card for usage.

For tag communication a ESP32-C6-WROOM-1(U) is used with the following
connection scheme:

ESP32-PoE-ISO  |  ESP32-C6-WROOM-1
---------------+------------------
  GPIO5        |    EN
  GPIO13       |    GPIO9
  GPIO36       |    GPIO3
  GPIO4        |    GPIO2
  GPIO33       |    GPIO24
  GPIO32       |    GPIO25
               |    GPIO8 pullup 5.1k

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Avoid error message log print when parsers.json is missing

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Workaround for IEEE802.15.4 modem stuck issue

The ESP32-C6 esp-idf based modem firmware can run into a case where it
does not receive data anymore from the tags. This can be detected when
it starts to print

"receive buffer full, drop the current frame"

and does not recover from that. In such a case a modem reset is triggered.

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Add OpenEPaperLink_ESP32-PoE-ISO_AP to release build

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Add OpenEPaperLink_ESP32-PoE-ISO_AP to condidional build

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

* Add Ethernet support

The ethernet support allows to make the network/internet connection
via LAN cable instead of WiFi. LAN is preferred, if a LAN cable is
connected and a valid IP configuration via DHCP can be obtained, WiFi
is switched off. If the LAN cable is disconnected, a fall back to
WiFi is done.

Use those defines in platform.ini for PHY settings:
ETHERNET_PHY_POWER: IO pin where the PHY can be switched of/on, can be
                    -1 if not used.
ETHERNET_CLK_MODE: PHY clock mode, see eth_clock_mode_t in ETH.h
ETHERNET_PHY_MDC: PHY MDC pin
ETHERNET_PHY_MDIO: PHY MDIO pin
ETHERNET_PHY_TYPE: PHY type, see eth_phy_type_t in ETH.h

Limitations:
- only DHCP is supported, no static IP configuration for LAN so far.
- If GPIO0 is used for one of the ETHERNET_CLK_MODE modes, then GPIO0
  cannot be used to clear the WiFi configuration.

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>

---------

Signed-off-by: Frank Kunz <mailinglists@kunz-im-inter.net>
Co-authored-by: Frank Kunz <mailinglists@kunz-im-inter.net>
2025-03-27 00:48:05 +01:00

134 lines
3.2 KiB
C++

#pragma once
#include <Arduino.h>
#include <cstdint>
#include <functional>
#include <string>
#include <vector>
#ifndef WIFI_MANAGER_H
#define WIFI_MANAGER_H
#include <WiFi.h>
enum WifiStatus {
NOINIT,
WAIT_CONNECTING,
CONNECTED,
WAIT_RECONNECT,
AP,
ETHERNET
};
class WifiManager {
private:
bool _connected;
bool _savewhensuccessfull;
int _reconnectIntervalCheck;
int _retryIntervalCheck;
int _connectionTimeout;
String _ssid;
String _pass;
unsigned long _nextReconnectCheck;
bool _APstarted;
const int SERIAL_BUFFER_SIZE = 64;
char serialBuffer[64];
int serialIndex = 0;
String WiFi_SSID();
String WiFi_psk();
bool waitForConnection();
void pollSerial();
static void terminalLog(String text);
static String buildHostname(esp_mac_type_t mac_type);
public:
WifiManager();
WifiStatus wifiStatus;
static uint8_t apClients;
bool connectToWifi();
bool connectToWifi(String ssid, String pass, bool savewhensuccessfull);
void startManagementServer();
void poll();
static void WiFiEvent(WiFiEvent_t event);
void initEth();
IPAddress localIP();
};
#endif
extern WifiManager wm;
// **** Improv Wi-Fi ****
// https://www.improv-wifi.com/
// https://github.com/jnthas/improv-wifi-demo
// http://www.apache.org/licenses/LICENSE-2.0
namespace improv {
enum Error : uint8_t {
ERROR_NONE = 0x00,
ERROR_INVALID_RPC = 0x01,
ERROR_UNKNOWN_RPC = 0x02,
ERROR_UNABLE_TO_CONNECT = 0x03,
ERROR_NOT_AUTHORIZED = 0x04,
ERROR_UNKNOWN = 0xFF,
};
enum State : uint8_t {
STATE_STOPPED = 0x00,
STATE_AWAITING_AUTHORIZATION = 0x01,
STATE_AUTHORIZED = 0x02,
STATE_PROVISIONING = 0x03,
STATE_PROVISIONED = 0x04,
};
enum Command : uint8_t {
UNKNOWN = 0x00,
WIFI_SETTINGS = 0x01,
IDENTIFY = 0x02,
GET_CURRENT_STATE = 0x02,
GET_DEVICE_INFO = 0x03,
GET_WIFI_NETWORKS = 0x04,
BAD_CHECKSUM = 0xFF,
};
static const uint8_t CAPABILITY_IDENTIFY = 0x01;
static const uint8_t IMPROV_SERIAL_VERSION = 1;
enum ImprovSerialType : uint8_t {
TYPE_CURRENT_STATE = 0x01,
TYPE_ERROR_STATE = 0x02,
TYPE_RPC = 0x03,
TYPE_RPC_RESPONSE = 0x04
};
struct ImprovCommand {
Command command;
std::string ssid;
std::string password;
};
ImprovCommand parse_improv_data(const std::vector<uint8_t> &data, bool check_checksum = true);
ImprovCommand parse_improv_data(const uint8_t *data, size_t length, bool check_checksum = true);
bool parse_improv_serial_byte(size_t position, uint8_t byte, const uint8_t *buffer,
std::function<bool(ImprovCommand)> &&callback, std::function<void(Error)> &&on_error);
std::vector<uint8_t> build_rpc_response(Command command, const std::vector<std::string> &datum,
bool add_checksum = true);
std::vector<uint8_t> build_rpc_response(Command command, const std::vector<String> &datum, bool add_checksum = true);
} // namespace improv
void set_state(improv::State state);
void send_response(std::vector<uint8_t> &response);
void set_error(improv::Error error);
void getAvailableWifiNetworks();
bool onCommandCallback(improv::ImprovCommand cmd);
void onErrorCallback(improv::Error err);