Updated Adding SubGhz support to LilyGo T‐Panel AP (markdown)

Adding-SubGhz-support-to-LilyGo-T‐Panel-AP.md

@@ -1,4 +1,4 @@
-**NB: SubGhz support is NOT functional in the current release.  This is a preview of the PLANNED support.**
+**NB: SubGhz support is NOT functional in the current release, but Beta binaries are available.**
 
 The [LilyGo T-Panel S3](https://www.lilygo.cc/products/t-panel-s3?_pos=1&_sid=f6ce2c79c&_ss=r) is a standard off the shelf product from 
 Lilygo which can be used as an OEPL AP without modifications with 802.15.4 and Bluetooth based tags.
@@ -9,10 +9,16 @@ the T-Panel via the H2 expansion port accessible externally.
 SubGhz can be added to both the RS485 and CANFD versions of the T-Panel, but 
 **NOT** the "Lite" version since it does not include the H2 expansion port.
 
-## SubGhz Connections for LilyGo T-Panel S3
+![T-panel_subghz](https://github.com/user-attachments/assets/c0ce7d0d-70e8-4aac-958c-d57753e8509b)
+
 
 <a href="https://github.com/user-attachments/assets/50d0effd-9505-4113-999b-fd9d69b5d015"><img src="https://github.com/user-attachments/assets/50d0effd-9505-4113-999b-fd9d69b5d015" width=50%></a>
 
+## SubGhz Connections for LilyGo T-Panel S3
+
+An CC1101 module can be connected to the H2 expansion port using a 16 pin 
+ribbon cable with a 1.27mm / 0.05" pin spacing.
+
 NOTE: Pin 1 is the lower right hand pin looking at the back of the T-Panel
 with the USB connectors at bottom.
 
@@ -35,3 +41,5 @@ with the USB connectors at bottom.
 | 15 | IO14 | | |
 | 16 | IO13 | | | 
 
+An PCB is planned to replace the need for spaghetti wiring.
+