GitBook: [master] 8 pages modified

getting-started/hardware/fipy.md

@@ -26,11 +26,7 @@
 * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
 * Look for the reset button on the FiPy module \(located at a corner of the board, next to the LED\).
 * Locate the USB connector on the Pysense/Pytrack/Pyscan.
-* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
-
-![](../../.gitbook/assets/pysense_fipy.png)
-
-![](../../.gitbook/assets/pytrack_fipy.png)
+* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqVauBuoNMgcByrNql%2FPysense_FiPy.png?generation=1534772069160637&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqVdDdxkK38AlRxtkc%2FPytrack_FiPy.png?generation=1534772071490748&alt=media)
 {% endtab %}
 
 {% tab title="USB UART Adapter" %}

getting-started/hardware/gpy.md

@@ -24,11 +24,7 @@
 * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
 * Look for the reset button on the GPy module \(located at a corner of the board, next to the LED\).
 * Locate the USB connector on the Pysense/Pytrack/Pyscan.
-* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
-
-![](../../.gitbook/assets/pysense_gpy.png)
-
-![](../../.gitbook/assets/pytrack_gpy.png)
+* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqejpmTIS1tbGw0Vrl%2FPysense_GPy.png?generation=1534772072781141&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqekpWIfccll6qkt85%2FPytrack_GPy.png?generation=1534772080535030&alt=media)
 {% endtab %}
 
 {% tab title="USB UART Adapter" %}

getting-started/hardware/lopy.md

@@ -24,11 +24,7 @@
 * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
 * Look for the reset button on the LoPy module \(located at a corner of the board, next to the LED\).
 * Locate the USB connector on the Pysense/Pytrack/Pyscan.
-* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
-
-![](../../.gitbook/assets/pysense_lopy.png)
-
-![](../../.gitbook/assets/pytrack_lopy.png)
+* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIq_ZvQtB3k9-QzXSEi%2FPysense_LoPy.png?generation=1534772084691543&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIq_aBQabbigN5pR8W2%2FPytrack_LoPy.png?generation=1534772068406423&alt=media)
 {% endtab %}
 
 {% tab title="USB UART Adapter" %}

getting-started/hardware/lopy4.md

@@ -24,11 +24,7 @@
 * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
 * Look for the reset button on the LoPy4 module \(located at a corner of the board, next to the LED\).
 * Locate the USB connector on the Pysense/Pytrack/Pyscan.
-* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
-
-![](../../.gitbook/assets/pysense_lopy4.png)
-
-![](../../.gitbook/assets/pytrack_lopy4.png)
+* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqbk7blltxqNtvQzH_%2FPysense_LoPy4.png?generation=1534772087747503&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqblUw130dL1aMAkLT%2FPytrack_LoPy4.png?generation=1534772079835788&alt=media)
 {% endtab %}
 
 {% tab title="USB UART Adapter" %}

getting-started/hardware/sipy.md

@@ -24,11 +24,7 @@
 * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
 * Look for the reset button on the SiPy module \(located at a corner of the board, next to the LED\).
 * Locate the USB connector on the Pysense/Pytrack/Pyscan.
-* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
-
-![](../../.gitbook/assets/pysense_sipy.png)
-
-![](../../.gitbook/assets/pytrack_sipy.png)
+* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqd_e51Wyuw40k6yJv%2FPysense_SiPy.png?generation=1534772077104600&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqdauW7rAnQlc-AL07%2FPytrack_SiPy.png?generation=1534772072530754&alt=media)
 {% endtab %}
 
 {% tab title="USB UART Adapter" %}

getting-started/hardware/wipy.md

@@ -24,11 +24,7 @@
 * Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be found [here](../../pytrack-pysense-pyscan/installation/firmware.md).
 * Look for the reset button on the WiPy module \(located at a corner of the board, next to the LED\).
 * Locate the USB connector on the Pysense/Pytrack/Pyscan.
-* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible.
-
-![](../../.gitbook/assets/pysense_wipy.png)
-
-![](../../.gitbook/assets/pytrack_wipy.png)
+* Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards the USB connector. It should firmly click into place and the pins should now no longer be visible. ![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqfutE_BZ6gjVdmiv0%2FPysense_WiPy.png?generation=1534772071067482&alt=media)![](https://blobscdn.gitbook.com/v0/b/gitbook-28427.appspot.com/o/assets%2F-LIfiUlGe6_zTmmvcuEa%2F-LKMXk1KQvBgjpw04I3u%2F-LIqfvoSjvxTIwgw2MSg%2FPytrack_WiPy.png?generation=1534772075484372&alt=media)
 {% endtab %}
 
 {% tab title="USB UART Adapter" %}

pybytes/add-device/README.md

@@ -10,19 +10,19 @@ In Pybytes, go to `Devices` Page:
 
 ![](../../.gitbook/assets/1-1.jpg)
 
-1. Select your device \(e.g., WiPy, LoPy, SiPy, etc.\);
+2. Select your device \(e.g., WiPy, LoPy, SiPy, etc.\);
 
 ![](../../.gitbook/assets/2-1.jpg)
 
-1. Select your shield \(e.g., PySense, PyTrack, PyScan or other\);
+3. Select your shield \(e.g., PySense, PyTrack, PyScan or other\);
 
 ![](../../.gitbook/assets/3%20%281%29.jpg)
 
-1. Select your network option;
+4. Select your network option;
 
 ![](../../.gitbook/assets/4%20%281%29.jpg)
 
-1. Enter a unique name and the network credentials \(SSID and password\) for your device;
+5. Enter a unique name and the network credentials \(SSID and password\) for your device;
 
 ![](../../.gitbook/assets/5-1.jpg)
 
@@ -38,7 +38,7 @@ Select how you would like to connect your device to Pybytes:
 
 {% page-ref page="quick.md" %}
 
-1. [Connect your device by flashing Pybytes Library](flash.md)
+2. [Connect your device by flashing Pybytes Library](flash.md)
 
 {% page-ref page="flash.md" %}
 

pybytes/add-device/flash.md

@@ -20,9 +20,11 @@ At the last step of the "Add Device" process:
 
 You can also download _Pybytes library_ at the device's settings page:
 
-1. Navigate to your device in Pybytes;
-2. On your device's page click on settings tab;
-3. Click on the button _Download_ at Pybytes library;
+2. Navigate to your device in Pybytes;
+
+3. On your device's page click on settings tab;
+
+4. Click on the button _Download_ at Pybytes library;
 
 ![](../../.gitbook/assets/pybytes-library-download%20%281%29.gif)