Move Hardware directory to new separate repo (#377)

* Delete Hardware directory

* Create readme.md

Hardware/12 Stand by ATC1441/README.md

@@ -1,3 +0,0 @@
-## 12" Stand by ATC1441 ##
-
-![image](Stand12_By_atc1441.jpg)

Hardware/2.9 Flasher by Jonas/ESLCONN.bak

@@ -1,2 +0,0 @@
-(kicad_symbol_lib (version 20211014) (generator kicad_symbol_editor)
-)

Hardware/2.9 Flasher by Jonas/ESLCONN.kicad_sym

@@ -1,64 +0,0 @@
-(kicad_symbol_lib (version 20211014) (generator kicad_symbol_editor)
-  (symbol "ESL-connector" (in_bom yes) (on_board yes)
-    (property "Reference" "U" (id 0) (at 0 11.43 0)
-      (effects (font (size 1.27 1.27)))
-    )
-    (property "Value" "ESL-connector" (id 1) (at 0 -11.43 0)
-      (effects (font (size 1.27 1.27)))
-    )
-    (property "Footprint" "" (id 2) (at 0 0 0)
-      (effects (font (size 1.27 1.27)) hide)
-    )
-    (property "Datasheet" "" (id 3) (at 0 0 0)
-      (effects (font (size 1.27 1.27)) hide)
-    )
-    (symbol "ESL-connector_0_1"
-      (rectangle (start -6.35 10.16) (end 6.35 -10.16)
-        (stroke (width 0.1524) (type default) (color 0 0 0 0))
-        (fill (type none))
-      )
-    )
-    (symbol "ESL-connector_1_1"
-      (pin power_in line (at -8.89 7.62 0) (length 2.54)
-        (name "VCC" (effects (font (size 1.27 1.27))))
-        (number "1" (effects (font (size 1.27 1.27))))
-      )
-      (pin bidirectional line (at 8.89 -7.62 180) (length 2.54)
-        (name "P1.0" (effects (font (size 1.27 1.27))))
-        (number "10" (effects (font (size 1.27 1.27))))
-      )
-      (pin input line (at -8.89 3.81 0) (length 2.54)
-        (name "MoSi" (effects (font (size 1.27 1.27))))
-        (number "2" (effects (font (size 1.27 1.27))))
-      )
-      (pin input line (at -8.89 0 0) (length 2.54)
-        (name "SS" (effects (font (size 1.27 1.27))))
-        (number "3" (effects (font (size 1.27 1.27))))
-      )
-      (pin output line (at -8.89 -3.81 0) (length 2.54)
-        (name "TXD" (effects (font (size 1.27 1.27))))
-        (number "4" (effects (font (size 1.27 1.27))))
-      )
-      (pin input line (at -8.89 -7.62 0) (length 2.54)
-        (name "CLK" (effects (font (size 1.27 1.27))))
-        (number "5" (effects (font (size 1.27 1.27))))
-      )
-      (pin output line (at 8.89 7.62 180) (length 2.54)
-        (name "MiSo" (effects (font (size 1.27 1.27))))
-        (number "6" (effects (font (size 1.27 1.27))))
-      )
-      (pin power_in line (at 8.89 3.81 180) (length 2.54)
-        (name "GND" (effects (font (size 1.27 1.27))))
-        (number "7" (effects (font (size 1.27 1.27))))
-      )
-      (pin input line (at 8.89 0 180) (length 2.54)
-        (name "RST" (effects (font (size 1.27 1.27))))
-        (number "8" (effects (font (size 1.27 1.27))))
-      )
-      (pin input line (at 8.89 -3.81 180) (length 2.54)
-        (name "RXD" (effects (font (size 1.27 1.27))))
-        (number "9" (effects (font (size 1.27 1.27))))
-      )
-    )
-  )
-)

Hardware/2.9 Flasher by Jonas/README.md

@@ -1,26 +0,0 @@
-# Alternative PCB for 2.9" flashing #
-
-This is an alternative PCB for flashing 2.9" ESLs
-
-<img width="600" alt="pcb" src="pcb.png">
-
-<img width="600" alt="bot" src="jig_bot.jpg">
-
-<img width="600" alt="top" src="jig_top.jpg">
-
-### Parts (per board) ###
-* 10x 1mm pogo pin 
-* 3x Switches
-* 3x 3mm LEDs
-* 3x 0805 SMD resistor (47 ohm or so, depending on LED color, personal taste, whatever)
-* ESP32-DevKit-Lipo form Olimex
-* please check the PCB for the rest
-
-### Errata ###
-The ESP32 board needs to be solder upside down
-
-## Getting PCB's ##
-You can order the boards from your favorite boardhouse, using the zip file in this repository. 
-
-## Disclaimer ##
-There is no guarantee or warranty whatsoever, nor is there any promise or insinuation that this board fill fullfill any particular purpose. This board may very well not work for you, set your hair and/or, but not limited to, pants on fire, incite violance or persuade other countries to invade your country. You're on your own, chief!

Hardware/2.9 Flasher by Jonas/esl.pretty/SOLUM_ZBS_DEBUG.kicad_mod

@@ -1,40 +0,0 @@
-(footprint "SOLUM_ZBS_DEBUG" (version 20211014) (generator pcbnew)
-  (layer "F.Cu")
-  (tedit 0)
-  (descr "<h3>Solum Debug header pinout for 1mm pogo pins</h3>")
-  (fp_text reference "J19" (at 0 0) (layer "F.SilkS") hide
-    (effects (font (size 1.27 1.27) (thickness 0.15)))
-    (tstamp 82ec8fc7-4947-43e8-a28a-f87f8d8a424a)
-  )
-  (fp_text value "" (at 0 0) (layer "F.Fab") hide
-    (effects (font (size 1.27 1.27) (thickness 0.15)))
-    (tstamp 9be777ad-9f8e-434c-9925-b4f3cbcf667d)
-  )
-  (fp_line (start -3.745 -2.506) (end -3.745 2.494) (layer "F.SilkS") (width 0.127) (tstamp 230f73ed-7388-4311-bd67-896af89b3fcb))
-  (fp_line (start -3.345 0.044) (end -2.745 -0.356) (layer "F.SilkS") (width 0.127) (tstamp 25b0ffe5-9f43-42b5-ad90-4a164f170e55))
-  (fp_line (start 3.755 -2.506) (end 3.755 2.494) (layer "F.SilkS") (width 0.127) (tstamp 53faed3a-63cc-4487-8883-b5c4197265c2))
-  (fp_line (start -3.345 0.044) (end -2.745 0.444) (layer "F.SilkS") (width 0.127) (tstamp 5a223cb8-3c61-4d1f-a412-d9c7d77f66b9))
-  (fp_line (start -3.745 -2.506) (end 3.755 -2.506) (layer "F.SilkS") (width 0.127) (tstamp 85c102fc-8b65-4d83-a6fe-e043723d82a4))
-  (fp_line (start -3.745 2.494) (end 3.755 2.494) (layer "F.SilkS") (width 0.127) (tstamp a1645c22-11d6-485a-92a9-3621b643513c))
-  (fp_line (start -3.345 0.044) (end -1.495 0.044) (layer "F.SilkS") (width 0.127) (tstamp dab4d2de-3395-4723-9799-d0bb3a191c1b))
-  (pad "1" thru_hole circle (at -2.995 1.744) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 71343d1a-b887-4c75-8f6e-3783c4cee9df))
-  (pad "2" thru_hole circle (at -0.995 1.744) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp a5bba08a-0aac-4518-8a18-8e86b2e9784c))
-  (pad "3" thru_hole circle (at 1.005 1.744) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 64903969-f443-47c1-a03d-9412f3950a7f))
-  (pad "4" thru_hole circle (at 3.005 1.794) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 53ec6283-c57d-491a-9c98-1df814704014))
-  (pad "5" thru_hole circle (at 0.005 -0.006) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 6b11af81-f064-49d0-8c15-50a5af3bdce8))
-  (pad "6" thru_hole circle (at 2.005 -0.006) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 048099e4-1d18-4e68-a98e-c376a592cc1d))
-  (pad "7" thru_hole circle (at -2.995 -1.756) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 323c1c33-7532-46f9-b99c-f77f2344710a))
-  (pad "8" thru_hole circle (at -0.995 -1.756) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp e067c309-8b30-4efa-b5e6-088c3f57692f))
-  (pad "9" thru_hole circle (at 1.005 -1.756) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp f4cd57db-f82c-479a-9526-cfebc536273b))
-  (pad "10" thru_hole circle (at 3.005 -1.756) (size 1.27 1.27) (drill 1) (layers *.Cu *.Mask)
-    (solder_mask_margin 0.0508) (tstamp 2700ab94-06e0-45e2-9edc-3815ba09c9d6))
-)

Hardware/2.9 Flasher by Jonas/fp-lib-table

@@ -1,3 +0,0 @@
-(fp_lib_table
-  (lib (name "esl")(type "KiCad")(uri "${KIPRJMOD}/esl.pretty")(options "")(descr ""))
-)

Hardware/2.9 Flasher by Jonas/gerber/jig2-B_Cu.gbl

@@ -1,252 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:56+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Copper,L2,Bot*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:56*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD10C,2.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD11R,1.700000X1.700000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD12O,1.700000X1.700000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD13R,1.800000X1.800000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD14C,1.800000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD15C,1.270000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ViaPad*
-%ADD16C,0.600000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,Conductor*
-%ADD17C,1.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,Conductor*
-%ADD18C,0.500000*%
-G04 #@! TD*
-G04 APERTURE END LIST*
-D10*
-X9250000Y-4765564D03*
-X2750000Y-4765564D03*
-X2750000Y-9265564D03*
-X9250000Y-9265564D03*
-D11*
-X7620000Y-35560000D03*
-D12*
-X7620000Y-38100000D03*
-X7620000Y-40640000D03*
-X7620000Y-43180000D03*
-X7620000Y-45720000D03*
-X7620000Y-48260000D03*
-X7620000Y-50800000D03*
-X7620000Y-53340000D03*
-X7620000Y-55880000D03*
-X7620000Y-58420000D03*
-X7620000Y-60960000D03*
-X7620000Y-63500000D03*
-X7620000Y-66040000D03*
-X7620000Y-68580000D03*
-X7620000Y-71120000D03*
-X7620000Y-73660000D03*
-X7620000Y-76200000D03*
-X7620000Y-78740000D03*
-X7620000Y-81280000D03*
-D13*
-X23290000Y-5080000D03*
-D14*
-X25830000Y-5080000D03*
-D11*
-X32975000Y-35570000D03*
-D12*
-X32975000Y-38110000D03*
-X32975000Y-40650000D03*
-X32975000Y-43190000D03*
-X32975000Y-45730000D03*
-X32975000Y-48270000D03*
-X32975000Y-50810000D03*
-X32975000Y-53350000D03*
-X32975000Y-55890000D03*
-X32975000Y-58430000D03*
-X32975000Y-60970000D03*
-X32975000Y-63510000D03*
-X32975000Y-66050000D03*
-X32975000Y-68590000D03*
-X32975000Y-71130000D03*
-X32975000Y-73670000D03*
-X32975000Y-76210000D03*
-X32975000Y-78750000D03*
-X32975000Y-81290000D03*
-D15*
-X28256000Y-17005000D03*
-X28256000Y-19005000D03*
-X28256000Y-21005000D03*
-X28206000Y-23005000D03*
-X30006000Y-20005000D03*
-X30006000Y-22005000D03*
-X31756000Y-17005000D03*
-X31756000Y-19005000D03*
-X31756000Y-21005000D03*
-X31756000Y-23005000D03*
-D13*
-X28830000Y-5080000D03*
-D14*
-X31370000Y-5080000D03*
-D10*
-X19250000Y-4765564D03*
-X12750000Y-4765564D03*
-X19250000Y-9265564D03*
-X12750000Y-9265564D03*
-D13*
-X34370000Y-5080000D03*
-D14*
-X36910000Y-5080000D03*
-D10*
-X14750000Y-20820000D03*
-X21250000Y-20820000D03*
-X14750000Y-25320000D03*
-X21250000Y-25320000D03*
-D16*
-X23000000Y-35500000D03*
-X24000000Y-39700000D03*
-X11000000Y-29750000D03*
-X11500000Y-15000000D03*
-X14440000Y-79310000D03*
-X7620000Y-21620000D03*
-X20500000Y-17000000D03*
-X20500000Y-15250000D03*
-X21000000Y-13750000D03*
-X26750000Y-38250000D03*
-D17*
-X23000000Y-37093502D02*
-X23000000Y-35500000D01*
-X24828249Y-38921751D02*
-X24050000Y-39700000D01*
-X25606498Y-39700000D02*
-X24828249Y-38921751D01*
-X24828249Y-38921751D02*
-X23000000Y-37093502D01*
-X32975000Y-35570000D02*
-X28845000Y-39700000D01*
-X24050000Y-39700000D02*
-X24000000Y-39700000D01*
-D18*
-X11000000Y-15500000D02*
-X11500000Y-15000000D01*
-D17*
-X28845000Y-39700000D02*
-X25606498Y-39700000D01*
-D18*
-X11000000Y-29750000D02*
-X11000000Y-15500000D01*
-X32975000Y-40650000D02*
-X23150000Y-40650000D01*
-X19250000Y-36750000D02*
-X19250000Y-9265564D01*
-X23150000Y-40650000D02*
-X19250000Y-36750000D01*
-X21940000Y-43190000D02*
-X16750000Y-38000000D01*
-X32975000Y-43190000D02*
-X21940000Y-43190000D01*
-X16750000Y-38000000D02*
-X16750000Y-16765564D01*
-X16750000Y-16765564D02*
-X9250000Y-9265564D01*
-X14750000Y-40250000D02*
-X14750000Y-25320000D01*
-X20230000Y-45730000D02*
-X14750000Y-40250000D01*
-X32975000Y-45730000D02*
-X20230000Y-45730000D01*
-D17*
-X9200000Y-50800000D02*
-X10750000Y-49250000D01*
-X10750000Y-49250000D02*
-X10750000Y-37250000D01*
-D18*
-X25410000Y-68590000D02*
-X25160000Y-68590000D01*
-X6820000Y-20820000D02*
-X7620000Y-21620000D01*
-D17*
-X33505000Y-17005000D02*
-X31756000Y-17005000D01*
-X9060000Y-35560000D02*
-X7620000Y-35560000D01*
-X7620000Y-50800000D02*
-X9200000Y-50800000D01*
-D18*
-X4200000Y-6215564D02*
-X2750000Y-4765564D01*
-D17*
-X34525000Y-18025000D02*
-X33505000Y-17005000D01*
-X10750000Y-37250000D02*
-X9060000Y-35560000D01*
-X32975000Y-68590000D02*
-X25410000Y-68590000D01*
-D18*
-X25160000Y-68590000D02*
-X14440000Y-79310000D01*
-X6820000Y-20820000D02*
-X4200000Y-18200000D01*
-D17*
-X34525000Y-67040000D02*
-X34525000Y-18025000D01*
-X7620000Y-50800000D02*
-X25410000Y-68590000D01*
-D18*
-X7620000Y-21620000D02*
-X7620000Y-35560000D01*
-D17*
-X32975000Y-68590000D02*
-X34525000Y-67040000D01*
-D18*
-X4200000Y-18200000D02*
-X4200000Y-6215564D01*
-X29239950Y-7750000D02*
-X20500000Y-16489950D01*
-X31700000Y-7750000D02*
-X29239950Y-7750000D01*
-X34370000Y-5080000D02*
-X31700000Y-7750000D01*
-X20500000Y-16489950D02*
-X20500000Y-16750000D01*
-X20500000Y-16750000D02*
-X20500000Y-17000000D01*
-X28830000Y-7170000D02*
-X20750000Y-15250000D01*
-X20750000Y-15250000D02*
-X20500000Y-15250000D01*
-X28830000Y-5080000D02*
-X28830000Y-7170000D01*
-X23290000Y-5080000D02*
-X23290000Y-11460000D01*
-X23290000Y-11460000D02*
-X21000000Y-13750000D01*
-D17*
-X25250000Y-18250000D02*
-X26495000Y-17005000D01*
-X26495000Y-17005000D02*
-X28256000Y-17005000D01*
-X26750000Y-26250000D02*
-X25250000Y-24750000D01*
-X26750000Y-38250000D02*
-X26750000Y-26250000D01*
-X25250000Y-24750000D02*
-X25250000Y-18250000D01*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-B_Mask.gbs

@@ -1,101 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:57+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Soldermask,Bot*
-G04 #@! TF.FilePolarity,Negative*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:57*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-%ADD10C,2.000000*%
-%ADD11R,1.700000X1.700000*%
-%ADD12O,1.700000X1.700000*%
-%ADD13R,1.800000X1.800000*%
-%ADD14C,1.800000*%
-%ADD15C,1.371600*%
-G04 APERTURE END LIST*
-D10*
-X9250000Y-4765564D03*
-X2750000Y-4765564D03*
-X2750000Y-9265564D03*
-X9250000Y-9265564D03*
-D11*
-X7620000Y-35560000D03*
-D12*
-X7620000Y-38100000D03*
-X7620000Y-40640000D03*
-X7620000Y-43180000D03*
-X7620000Y-45720000D03*
-X7620000Y-48260000D03*
-X7620000Y-50800000D03*
-X7620000Y-53340000D03*
-X7620000Y-55880000D03*
-X7620000Y-58420000D03*
-X7620000Y-60960000D03*
-X7620000Y-63500000D03*
-X7620000Y-66040000D03*
-X7620000Y-68580000D03*
-X7620000Y-71120000D03*
-X7620000Y-73660000D03*
-X7620000Y-76200000D03*
-X7620000Y-78740000D03*
-X7620000Y-81280000D03*
-D13*
-X23290000Y-5080000D03*
-D14*
-X25830000Y-5080000D03*
-D11*
-X32975000Y-35570000D03*
-D12*
-X32975000Y-38110000D03*
-X32975000Y-40650000D03*
-X32975000Y-43190000D03*
-X32975000Y-45730000D03*
-X32975000Y-48270000D03*
-X32975000Y-50810000D03*
-X32975000Y-53350000D03*
-X32975000Y-55890000D03*
-X32975000Y-58430000D03*
-X32975000Y-60970000D03*
-X32975000Y-63510000D03*
-X32975000Y-66050000D03*
-X32975000Y-68590000D03*
-X32975000Y-71130000D03*
-X32975000Y-73670000D03*
-X32975000Y-76210000D03*
-X32975000Y-78750000D03*
-X32975000Y-81290000D03*
-D15*
-X28256000Y-17005000D03*
-X28256000Y-19005000D03*
-X28256000Y-21005000D03*
-X28206000Y-23005000D03*
-X30006000Y-20005000D03*
-X30006000Y-22005000D03*
-X31756000Y-17005000D03*
-X31756000Y-19005000D03*
-X31756000Y-21005000D03*
-X31756000Y-23005000D03*
-D13*
-X28830000Y-5080000D03*
-D14*
-X31370000Y-5080000D03*
-D10*
-X19250000Y-4765564D03*
-X12750000Y-4765564D03*
-X19250000Y-9265564D03*
-X12750000Y-9265564D03*
-D13*
-X34370000Y-5080000D03*
-D14*
-X36910000Y-5080000D03*
-D10*
-X14750000Y-20820000D03*
-X21250000Y-20820000D03*
-X14750000Y-25320000D03*
-X21250000Y-25320000D03*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-B_Paste.gbp

@@ -1,15 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:57+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Paste,Bot*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:57*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-B_Silkscreen.gbo

@@ -1,153 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:57+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Legend,Bot*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:57*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-%ADD10C,0.150000*%
-%ADD11C,0.120000*%
-%ADD12C,2.000000*%
-%ADD13R,1.700000X1.700000*%
-%ADD14O,1.700000X1.700000*%
-%ADD15R,1.800000X1.800000*%
-%ADD16C,1.800000*%
-%ADD17C,1.371600*%
-G04 APERTURE END LIST*
-D10*
-X19333333Y-19224761D02*
-X19190476Y-19272380D01*
-X18952380Y-19272380D01*
-X18857142Y-19224761D01*
-X18809523Y-19177142D01*
-X18761904Y-19081904D01*
-X18761904Y-18986666D01*
-X18809523Y-18891428D01*
-X18857142Y-18843809D01*
-X18952380Y-18796190D01*
-X19142857Y-18748571D01*
-X19238095Y-18700952D01*
-X19285714Y-18653333D01*
-X19333333Y-18558095D01*
-X19333333Y-18462857D01*
-X19285714Y-18367619D01*
-X19238095Y-18320000D01*
-X19142857Y-18272380D01*
-X18904761Y-18272380D01*
-X18761904Y-18320000D01*
-X18428571Y-18272380D02*
-X18190476Y-19272380D01*
-X18000000Y-18558095D01*
-X17809523Y-19272380D01*
-X17571428Y-18272380D01*
-X17285714Y-18272380D02*
-X16666666Y-18272380D01*
-X17000000Y-18653333D01*
-X16857142Y-18653333D01*
-X16761904Y-18700952D01*
-X16714285Y-18748571D01*
-X16666666Y-18843809D01*
-X16666666Y-19081904D01*
-X16714285Y-19177142D01*
-X16761904Y-19224761D01*
-X16857142Y-19272380D01*
-X17142857Y-19272380D01*
-X17238095Y-19224761D01*
-X17285714Y-19177142D01*
-D11*
-X14500000Y-23820000D02*
-X14500000Y-22320000D01*
-X20250000Y-26320000D02*
-X15750000Y-26320000D01*
-X21500000Y-22320000D02*
-X21500000Y-23820000D01*
-X15750000Y-19820000D02*
-X20250000Y-19820000D01*
-%LPC*%
-D12*
-X9250000Y-4765564D03*
-X2750000Y-4765564D03*
-X2750000Y-9265564D03*
-X9250000Y-9265564D03*
-D13*
-X7620000Y-35560000D03*
-D14*
-X7620000Y-38100000D03*
-X7620000Y-40640000D03*
-X7620000Y-43180000D03*
-X7620000Y-45720000D03*
-X7620000Y-48260000D03*
-X7620000Y-50800000D03*
-X7620000Y-53340000D03*
-X7620000Y-55880000D03*
-X7620000Y-58420000D03*
-X7620000Y-60960000D03*
-X7620000Y-63500000D03*
-X7620000Y-66040000D03*
-X7620000Y-68580000D03*
-X7620000Y-71120000D03*
-X7620000Y-73660000D03*
-X7620000Y-76200000D03*
-X7620000Y-78740000D03*
-X7620000Y-81280000D03*
-D15*
-X23290000Y-5080000D03*
-D16*
-X25830000Y-5080000D03*
-D13*
-X32975000Y-35570000D03*
-D14*
-X32975000Y-38110000D03*
-X32975000Y-40650000D03*
-X32975000Y-43190000D03*
-X32975000Y-45730000D03*
-X32975000Y-48270000D03*
-X32975000Y-50810000D03*
-X32975000Y-53350000D03*
-X32975000Y-55890000D03*
-X32975000Y-58430000D03*
-X32975000Y-60970000D03*
-X32975000Y-63510000D03*
-X32975000Y-66050000D03*
-X32975000Y-68590000D03*
-X32975000Y-71130000D03*
-X32975000Y-73670000D03*
-X32975000Y-76210000D03*
-X32975000Y-78750000D03*
-X32975000Y-81290000D03*
-D17*
-X28256000Y-17005000D03*
-X28256000Y-19005000D03*
-X28256000Y-21005000D03*
-X28206000Y-23005000D03*
-X30006000Y-20005000D03*
-X30006000Y-22005000D03*
-X31756000Y-17005000D03*
-X31756000Y-19005000D03*
-X31756000Y-21005000D03*
-X31756000Y-23005000D03*
-D15*
-X28830000Y-5080000D03*
-D16*
-X31370000Y-5080000D03*
-D12*
-X19250000Y-4765564D03*
-X12750000Y-4765564D03*
-X19250000Y-9265564D03*
-X12750000Y-9265564D03*
-D15*
-X34370000Y-5080000D03*
-D16*
-X36910000Y-5080000D03*
-D12*
-X14750000Y-20820000D03*
-X21250000Y-20820000D03*
-X14750000Y-25320000D03*
-X21250000Y-25320000D03*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-Edge_Cuts.gm1

@@ -1,26 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:57+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Profile,NP*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:57*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 #@! TA.AperFunction,Profile*
-%ADD10C,0.100000*%
-G04 #@! TD*
-G04 APERTURE END LIST*
-D10*
-X0Y-85000000D02*
-X0Y0D01*
-X40000000Y-85000000D02*
-X0Y-85000000D01*
-X40000000Y0D02*
-X40000000Y-85000000D01*
-X0Y0D02*
-X40000000Y0D01*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-F_Cu.gtl

@@ -1,528 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:56+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Copper,L1,Top*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:56*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 Aperture macros list*
-%AMRoundRect*
-0 Rectangle with rounded corners*
-0 $1 Rounding radius*
-0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
-0 Add a 4 corners polygon primitive as box body*
-4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
-0 Add four circle primitives for the rounded corners*
-1,1,$1+$1,$2,$3*
-1,1,$1+$1,$4,$5*
-1,1,$1+$1,$6,$7*
-1,1,$1+$1,$8,$9*
-0 Add four rect primitives between the rounded corners*
-20,1,$1+$1,$2,$3,$4,$5,0*
-20,1,$1+$1,$4,$5,$6,$7,0*
-20,1,$1+$1,$6,$7,$8,$9,0*
-20,1,$1+$1,$8,$9,$2,$3,0*%
-%AMFreePoly0*
-4,1,22,0.500000,-0.750000,0.000000,-0.750000,0.000000,-0.745033,-0.079941,-0.743568,-0.215256,-0.701293,-0.333266,-0.622738,-0.424486,-0.514219,-0.481581,-0.384460,-0.499164,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.499164,0.250000,-0.499963,0.256109,-0.478152,0.396186,-0.417904,0.524511,-0.324060,0.630769,-0.204165,0.706417,-0.067858,0.745374,0.000000,0.744959,0.000000,0.750000,
-0.500000,0.750000,0.500000,-0.750000,0.500000,-0.750000,$1*%
-%AMFreePoly1*
-4,1,20,0.000000,0.744959,0.073905,0.744508,0.209726,0.703889,0.328688,0.626782,0.421226,0.519385,0.479903,0.390333,0.500000,0.250000,0.500000,-0.250000,0.499851,-0.262216,0.476331,-0.402017,0.414519,-0.529596,0.319384,-0.634700,0.198574,-0.708877,0.061801,-0.746166,0.000000,-0.745033,0.000000,-0.750000,-0.500000,-0.750000,-0.500000,0.750000,0.000000,0.750000,0.000000,0.744959,
-0.000000,0.744959,$1*%
-G04 Aperture macros list end*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD10FreePoly0,180.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD11FreePoly1,180.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD12RoundRect,0.250000X0.350000X0.450000X-0.350000X0.450000X-0.350000X-0.450000X0.350000X-0.450000X0*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD13RoundRect,0.250000X-0.450000X0.350000X-0.450000X-0.350000X0.450000X-0.350000X0.450000X0.350000X0*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD14C,2.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD15R,1.700000X1.700000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD16O,1.700000X1.700000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD17R,0.800000X1.900000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD18R,1.800000X1.800000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD19C,1.800000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD20RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD21R,1.900000X0.800000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD22FreePoly0,90.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD23FreePoly1,90.000000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ComponentPad*
-%ADD24C,1.270000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
-%ADD25C,2.500000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,ViaPad*
-%ADD26C,0.600000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,Conductor*
-%ADD27C,0.500000*%
-G04 #@! TD*
-G04 #@! TA.AperFunction,Conductor*
-%ADD28C,1.000000*%
-G04 #@! TD*
-G04 APERTURE END LIST*
-G36*
-X25250000Y-81350000D02*
-G01*
-X24750000Y-81350000D01*
-X24750000Y-80950000D01*
-X25250000Y-80950000D01*
-X25250000Y-81350000D01*
-G37*
-G36*
-X25250000Y-80550000D02*
-G01*
-X24750000Y-80550000D01*
-X24750000Y-80150000D01*
-X25250000Y-80150000D01*
-X25250000Y-80550000D01*
-G37*
-D10*
-X25650000Y-80750000D03*
-D11*
-X24350000Y-80750000D03*
-D12*
-X18250000Y-81120000D03*
-X16250000Y-81120000D03*
-D13*
-X6000000Y-13000000D03*
-X6000000Y-15000000D03*
-D14*
-X9250000Y-4765564D03*
-X2750000Y-4765564D03*
-X2750000Y-9265564D03*
-X9250000Y-9265564D03*
-D15*
-X7620000Y-35560000D03*
-D16*
-X7620000Y-38100000D03*
-X7620000Y-40640000D03*
-X7620000Y-43180000D03*
-X7620000Y-45720000D03*
-X7620000Y-48260000D03*
-X7620000Y-50800000D03*
-X7620000Y-53340000D03*
-X7620000Y-55880000D03*
-X7620000Y-58420000D03*
-X7620000Y-60960000D03*
-X7620000Y-63500000D03*
-X7620000Y-66040000D03*
-X7620000Y-68580000D03*
-X7620000Y-71120000D03*
-X7620000Y-73660000D03*
-X7620000Y-76200000D03*
-X7620000Y-78740000D03*
-X7620000Y-81280000D03*
-D17*
-X23380000Y-75120000D03*
-X21480000Y-75120000D03*
-X22430000Y-78120000D03*
-D13*
-X35500000Y-10000000D03*
-X35500000Y-12000000D03*
-X30500000Y-10000000D03*
-X30500000Y-12000000D03*
-X16000000Y-13000000D03*
-X16000000Y-15000000D03*
-D18*
-X23290000Y-5080000D03*
-D19*
-X25830000Y-5080000D03*
-D20*
-X21250000Y-71120000D03*
-X23250000Y-71120000D03*
-D15*
-X32975000Y-35570000D03*
-D16*
-X32975000Y-38110000D03*
-X32975000Y-40650000D03*
-X32975000Y-43190000D03*
-X32975000Y-45730000D03*
-X32975000Y-48270000D03*
-X32975000Y-50810000D03*
-X32975000Y-53350000D03*
-X32975000Y-55890000D03*
-X32975000Y-58430000D03*
-X32975000Y-60970000D03*
-X32975000Y-63510000D03*
-X32975000Y-66050000D03*
-X32975000Y-68590000D03*
-X32975000Y-71130000D03*
-X32975000Y-73670000D03*
-X32975000Y-76210000D03*
-X32975000Y-78750000D03*
-X32975000Y-81290000D03*
-D21*
-X13400000Y-74470000D03*
-X13400000Y-76370000D03*
-X16400000Y-75420000D03*
-D13*
-X24500000Y-10000000D03*
-X24500000Y-12000000D03*
-D22*
-X26250000Y-72650000D03*
-D23*
-X26250000Y-71350000D03*
-D24*
-X28256000Y-17005000D03*
-X28256000Y-19005000D03*
-X28256000Y-21005000D03*
-X28206000Y-23005000D03*
-X30006000Y-20005000D03*
-X30006000Y-22005000D03*
-X31756000Y-17005000D03*
-X31756000Y-19005000D03*
-X31756000Y-21005000D03*
-X31756000Y-23005000D03*
-D25*
-X28500000Y-77500000D03*
-D18*
-X28830000Y-5080000D03*
-D19*
-X31370000Y-5080000D03*
-D13*
-X10750000Y-25500000D03*
-X10750000Y-27500000D03*
-D14*
-X19250000Y-4765564D03*
-X12750000Y-4765564D03*
-X19250000Y-9265564D03*
-X12750000Y-9265564D03*
-D18*
-X34370000Y-5080000D03*
-D19*
-X36910000Y-5080000D03*
-D12*
-X18750000Y-71120000D03*
-X16750000Y-71120000D03*
-D14*
-X14750000Y-20820000D03*
-X21250000Y-20820000D03*
-X14750000Y-25320000D03*
-X21250000Y-25320000D03*
-D26*
-X23000000Y-35500000D03*
-X24000000Y-39700000D03*
-X11000000Y-29750000D03*
-X11500000Y-15000000D03*
-X14440000Y-79310000D03*
-X7620000Y-21620000D03*
-X20500000Y-17000000D03*
-X20500000Y-15250000D03*
-X21000000Y-13750000D03*
-X26750000Y-38250000D03*
-D27*
-X34975000Y-20225000D02*
-X33755000Y-19005000D01*
-X33755000Y-19005000D02*
-X31756000Y-19005000D01*
-X34975000Y-58970000D02*
-X34975000Y-20225000D01*
-X32975000Y-60970000D02*
-X34975000Y-58970000D01*
-X25830000Y-8670000D02*
-X24500000Y-10000000D01*
-X25830000Y-5080000D02*
-X25830000Y-8670000D01*
-X30671000Y-24090000D02*
-X31756000Y-23005000D01*
-X29050000Y-49200000D02*
-X29050000Y-25700000D01*
-X30660000Y-24090000D02*
-X30671000Y-24090000D01*
-X29000000Y-49250000D02*
-X29050000Y-49200000D01*
-X29050000Y-25700000D02*
-X30660000Y-24090000D01*
-X32975000Y-50810000D02*
-X30560000Y-50810000D01*
-X30560000Y-50810000D02*
-X29000000Y-49250000D01*
-X31370000Y-9130000D02*
-X30500000Y-10000000D01*
-X31370000Y-5080000D02*
-X31370000Y-9130000D01*
-X28300000Y-24450000D02*
-X29300000Y-24450000D01*
-X32975000Y-53350000D02*
-X29350000Y-53350000D01*
-X30006000Y-23244000D02*
-X30006000Y-22005000D01*
-X29300000Y-24450000D02*
-X30000000Y-23750000D01*
-X30000000Y-23250000D02*
-X30006000Y-23244000D01*
-X29350000Y-53350000D02*
-X28300000Y-52300000D01*
-X28300000Y-52300000D02*
-X28300000Y-24450000D01*
-X30000000Y-23750000D02*
-X30000000Y-23250000D01*
-X36910000Y-8590000D02*
-X35500000Y-10000000D01*
-X36910000Y-5080000D02*
-X36910000Y-8590000D01*
-X17500000Y-15000000D02*
-X16000000Y-15000000D01*
-D28*
-X21480000Y-75120000D02*
-X21480000Y-71350000D01*
-X26250000Y-69750000D02*
-X26250000Y-71350000D01*
-X21250000Y-68500000D02*
-X25000000Y-68500000D01*
-D27*
-X24500000Y-12000000D02*
-X20500000Y-12000000D01*
-X10750000Y-27500000D02*
-X10750000Y-29500000D01*
-X20500000Y-12000000D02*
-X17500000Y-15000000D01*
-X11000000Y-29750000D02*
-X17250000Y-29750000D01*
-D28*
-X21480000Y-71350000D02*
-X21250000Y-71120000D01*
-D27*
-X17250000Y-29750000D02*
-X23000000Y-35500000D01*
-X35500000Y-12000000D02*
-X30500000Y-12000000D01*
-D28*
-X25000000Y-68500000D02*
-X26250000Y-69750000D01*
-X21250000Y-42450000D02*
-X21250000Y-68500000D01*
-X21250000Y-71120000D02*
-X18750000Y-71120000D01*
-D27*
-X6000000Y-15000000D02*
-X11500000Y-15000000D01*
-D28*
-X24000000Y-39700000D02*
-X21250000Y-42450000D01*
-D27*
-X10750000Y-29500000D02*
-X11000000Y-29750000D01*
-D28*
-X21250000Y-68500000D02*
-X21250000Y-71120000D01*
-D27*
-X13000000Y-15000000D02*
-X16000000Y-15000000D01*
-X30500000Y-12000000D02*
-X24500000Y-12000000D01*
-X11500000Y-15000000D02*
-X13000000Y-15000000D01*
-X16000000Y-12515564D02*
-X16000000Y-13000000D01*
-X12750000Y-9265564D02*
-X16000000Y-12515564D01*
-X19250000Y-9265564D02*
-X16000000Y-12515564D01*
-X6000000Y-12515564D02*
-X6000000Y-13000000D01*
-X2750000Y-9265564D02*
-X6000000Y-12515564D01*
-X9250000Y-9265564D02*
-X6000000Y-12515564D01*
-X14750000Y-25320000D02*
-X11320000Y-25320000D01*
-X21250000Y-25320000D02*
-X14750000Y-25320000D01*
-X28206000Y-23005000D02*
-X28206000Y-23544000D01*
-X27600000Y-55100000D02*
-X28390000Y-55890000D01*
-X28390000Y-55890000D02*
-X32975000Y-55890000D01*
-X27600000Y-24150000D02*
-X27600000Y-55100000D01*
-X28206000Y-23544000D02*
-X27600000Y-24150000D01*
-X34275000Y-57130000D02*
-X34275000Y-23524000D01*
-X32975000Y-58430000D02*
-X34275000Y-57130000D01*
-X34275000Y-23524000D02*
-X31756000Y-21005000D01*
-X13400000Y-78270000D02*
-X13400000Y-76370000D01*
-X8420000Y-20820000D02*
-X7620000Y-21620000D01*
-X9250000Y-4765564D02*
-X2750000Y-4765564D01*
-X16250000Y-81120000D02*
-X14440000Y-79310000D01*
-X14750000Y-20820000D02*
-X8420000Y-20820000D01*
-X12750000Y-4765564D02*
-X9250000Y-4765564D01*
-X14440000Y-79310000D02*
-X13400000Y-78270000D01*
-X14750000Y-20820000D02*
-X21250000Y-20820000D01*
-X19250000Y-4765564D02*
-X12750000Y-4765564D01*
-X30006000Y-20005000D02*
-X30006000Y-15744000D01*
-X35675000Y-16425000D02*
-X35675000Y-68430000D01*
-X34250000Y-15000000D02*
-X35675000Y-16425000D01*
-X30006000Y-15744000D02*
-X30750000Y-15000000D01*
-X35675000Y-68430000D02*
-X32975000Y-71130000D01*
-X30750000Y-15000000D02*
-X34250000Y-15000000D01*
-X26200000Y-34800000D02*
-X26200000Y-19550000D01*
-X26745000Y-19005000D02*
-X28256000Y-19005000D01*
-X26200000Y-19550000D02*
-X26745000Y-19005000D01*
-X22900000Y-38100000D02*
-X26200000Y-34800000D01*
-X7620000Y-38100000D02*
-X22900000Y-38100000D01*
-X9460000Y-38800000D02*
-X7620000Y-40640000D01*
-X26900000Y-35100000D02*
-X23200000Y-38800000D01*
-X27245000Y-21005000D02*
-X26900000Y-21350000D01*
-X28256000Y-21005000D02*
-X27245000Y-21005000D01*
-X26900000Y-21350000D02*
-X26900000Y-35100000D01*
-X23200000Y-38800000D02*
-X9460000Y-38800000D01*
-X3400000Y-19089950D02*
-X3400000Y-46400000D01*
-X4169975Y-18319975D02*
-X3400000Y-19089950D01*
-X3400000Y-46400000D02*
-X5260000Y-48260000D01*
-X20500000Y-17000000D02*
-X19180025Y-18319975D01*
-X5260000Y-48260000D02*
-X7620000Y-48260000D01*
-X19180025Y-18319975D02*
-X4169975Y-18319975D01*
-X2700000Y-51700000D02*
-X4340000Y-53340000D01*
-X2700000Y-18800000D02*
-X2700000Y-51700000D01*
-X18130025Y-17619975D02*
-X18010050Y-17500000D01*
-X20500000Y-15250000D02*
-X18130025Y-17619975D01*
-X4000000Y-17500000D02*
-X2700000Y-18800000D01*
-X18010050Y-17500000D02*
-X4000000Y-17500000D01*
-X4340000Y-53340000D02*
-X7620000Y-53340000D01*
-X3380000Y-55880000D02*
-X7620000Y-55880000D01*
-X17519390Y-16000000D02*
-X16769390Y-16750000D01*
-X20939339Y-13750000D02*
-X18689339Y-16000000D01*
-X16769390Y-16750000D02*
-X3250000Y-16750000D01*
-X3250000Y-16750000D02*
-X2000000Y-18000000D01*
-X21000000Y-13750000D02*
-X20939339Y-13750000D01*
-X2000000Y-18000000D02*
-X2000000Y-54500000D01*
-X2000000Y-54500000D02*
-X3380000Y-55880000D01*
-X18689339Y-16000000D02*
-X17519390Y-16000000D01*
-X15060000Y-70310000D02*
-X10790000Y-66040000D01*
-X10790000Y-66040000D02*
-X7620000Y-66040000D01*
-X16750000Y-71120000D02*
-X15060000Y-72810000D01*
-X15060000Y-72810000D02*
-X13400000Y-74470000D01*
-X15060000Y-72810000D02*
-X15060000Y-70310000D01*
-X23380000Y-75120000D02*
-X23380000Y-71250000D01*
-X23380000Y-75120000D02*
-X23380000Y-75470000D01*
-X23380000Y-71250000D02*
-X23250000Y-71120000D01*
-X22330000Y-76520000D02*
-X17500000Y-76520000D01*
-X23380000Y-75470000D02*
-X22330000Y-76520000D01*
-X17500000Y-76520000D02*
-X16400000Y-75420000D01*
-D28*
-X26000000Y-55250000D02*
-X26000000Y-38750000D01*
-X28500000Y-77500000D02*
-X28500000Y-57750000D01*
-X25650000Y-80350000D02*
-X28500000Y-77500000D01*
-X28500000Y-57750000D02*
-X26000000Y-55250000D01*
-X26000000Y-38750000D02*
-X26500000Y-38250000D01*
-X25650000Y-80750000D02*
-X25650000Y-80350000D01*
-X26500000Y-38250000D02*
-X26650000Y-38250000D01*
-X21250000Y-78120000D02*
-X18250000Y-81120000D01*
-X23380000Y-78120000D02*
-X22430000Y-78120000D01*
-X26250000Y-72650000D02*
-X26250000Y-75250000D01*
-X22430000Y-78830000D02*
-X24350000Y-80750000D01*
-X22430000Y-78120000D02*
-X21250000Y-78120000D01*
-X22430000Y-78120000D02*
-X22430000Y-78830000D01*
-X26250000Y-75250000D02*
-X23380000Y-78120000D01*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-F_Mask.gts

@@ -1,178 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:57+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Soldermask,Top*
-G04 #@! TF.FilePolarity,Negative*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:57*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 Aperture macros list*
-%AMRoundRect*
-0 Rectangle with rounded corners*
-0 $1 Rounding radius*
-0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
-0 Add a 4 corners polygon primitive as box body*
-4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
-0 Add four circle primitives for the rounded corners*
-1,1,$1+$1,$2,$3*
-1,1,$1+$1,$4,$5*
-1,1,$1+$1,$6,$7*
-1,1,$1+$1,$8,$9*
-0 Add four rect primitives between the rounded corners*
-20,1,$1+$1,$2,$3,$4,$5,0*
-20,1,$1+$1,$4,$5,$6,$7,0*
-20,1,$1+$1,$6,$7,$8,$9,0*
-20,1,$1+$1,$8,$9,$2,$3,0*%
-%AMFreePoly0*
-4,1,22,0.500000,-0.750000,0.000000,-0.750000,0.000000,-0.745033,-0.079941,-0.743568,-0.215256,-0.701293,-0.333266,-0.622738,-0.424486,-0.514219,-0.481581,-0.384460,-0.499164,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.499164,0.250000,-0.499963,0.256109,-0.478152,0.396186,-0.417904,0.524511,-0.324060,0.630769,-0.204165,0.706417,-0.067858,0.745374,0.000000,0.744959,0.000000,0.750000,
-0.500000,0.750000,0.500000,-0.750000,0.500000,-0.750000,$1*%
-%AMFreePoly1*
-4,1,20,0.000000,0.744959,0.073905,0.744508,0.209726,0.703889,0.328688,0.626782,0.421226,0.519385,0.479903,0.390333,0.500000,0.250000,0.500000,-0.250000,0.499851,-0.262216,0.476331,-0.402017,0.414519,-0.529596,0.319384,-0.634700,0.198574,-0.708877,0.061801,-0.746166,0.000000,-0.745033,0.000000,-0.750000,-0.500000,-0.750000,-0.500000,0.750000,0.000000,0.750000,0.000000,0.744959,
-0.000000,0.744959,$1*%
-G04 Aperture macros list end*
-%ADD10FreePoly0,180.000000*%
-%ADD11FreePoly1,180.000000*%
-%ADD12RoundRect,0.250000X0.350000X0.450000X-0.350000X0.450000X-0.350000X-0.450000X0.350000X-0.450000X0*%
-%ADD13RoundRect,0.250000X-0.450000X0.350000X-0.450000X-0.350000X0.450000X-0.350000X0.450000X0.350000X0*%
-%ADD14C,2.000000*%
-%ADD15R,1.700000X1.700000*%
-%ADD16O,1.700000X1.700000*%
-%ADD17R,0.800000X1.900000*%
-%ADD18R,1.800000X1.800000*%
-%ADD19C,1.800000*%
-%ADD20RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
-%ADD21R,1.900000X0.800000*%
-%ADD22FreePoly0,90.000000*%
-%ADD23FreePoly1,90.000000*%
-%ADD24C,1.371600*%
-%ADD25C,2.500000*%
-G04 APERTURE END LIST*
-D10*
-X25650000Y-80750000D03*
-D11*
-X24350000Y-80750000D03*
-D12*
-X18250000Y-81120000D03*
-X16250000Y-81120000D03*
-D13*
-X6000000Y-13000000D03*
-X6000000Y-15000000D03*
-D14*
-X9250000Y-4765564D03*
-X2750000Y-4765564D03*
-X2750000Y-9265564D03*
-X9250000Y-9265564D03*
-D15*
-X7620000Y-35560000D03*
-D16*
-X7620000Y-38100000D03*
-X7620000Y-40640000D03*
-X7620000Y-43180000D03*
-X7620000Y-45720000D03*
-X7620000Y-48260000D03*
-X7620000Y-50800000D03*
-X7620000Y-53340000D03*
-X7620000Y-55880000D03*
-X7620000Y-58420000D03*
-X7620000Y-60960000D03*
-X7620000Y-63500000D03*
-X7620000Y-66040000D03*
-X7620000Y-68580000D03*
-X7620000Y-71120000D03*
-X7620000Y-73660000D03*
-X7620000Y-76200000D03*
-X7620000Y-78740000D03*
-X7620000Y-81280000D03*
-D17*
-X23380000Y-75120000D03*
-X21480000Y-75120000D03*
-X22430000Y-78120000D03*
-D13*
-X35500000Y-10000000D03*
-X35500000Y-12000000D03*
-X30500000Y-10000000D03*
-X30500000Y-12000000D03*
-X16000000Y-13000000D03*
-X16000000Y-15000000D03*
-D18*
-X23290000Y-5080000D03*
-D19*
-X25830000Y-5080000D03*
-D20*
-X21250000Y-71120000D03*
-X23250000Y-71120000D03*
-D15*
-X32975000Y-35570000D03*
-D16*
-X32975000Y-38110000D03*
-X32975000Y-40650000D03*
-X32975000Y-43190000D03*
-X32975000Y-45730000D03*
-X32975000Y-48270000D03*
-X32975000Y-50810000D03*
-X32975000Y-53350000D03*
-X32975000Y-55890000D03*
-X32975000Y-58430000D03*
-X32975000Y-60970000D03*
-X32975000Y-63510000D03*
-X32975000Y-66050000D03*
-X32975000Y-68590000D03*
-X32975000Y-71130000D03*
-X32975000Y-73670000D03*
-X32975000Y-76210000D03*
-X32975000Y-78750000D03*
-X32975000Y-81290000D03*
-D21*
-X13400000Y-74470000D03*
-X13400000Y-76370000D03*
-X16400000Y-75420000D03*
-D13*
-X24500000Y-10000000D03*
-X24500000Y-12000000D03*
-D22*
-X26250000Y-72650000D03*
-D23*
-X26250000Y-71350000D03*
-D24*
-X28256000Y-17005000D03*
-X28256000Y-19005000D03*
-X28256000Y-21005000D03*
-X28206000Y-23005000D03*
-X30006000Y-20005000D03*
-X30006000Y-22005000D03*
-X31756000Y-17005000D03*
-X31756000Y-19005000D03*
-X31756000Y-21005000D03*
-X31756000Y-23005000D03*
-D25*
-X28500000Y-77500000D03*
-D18*
-X28830000Y-5080000D03*
-D19*
-X31370000Y-5080000D03*
-D13*
-X10750000Y-25500000D03*
-X10750000Y-27500000D03*
-D14*
-X19250000Y-4765564D03*
-X12750000Y-4765564D03*
-X19250000Y-9265564D03*
-X12750000Y-9265564D03*
-D18*
-X34370000Y-5080000D03*
-D19*
-X36910000Y-5080000D03*
-D12*
-X18750000Y-71120000D03*
-X16750000Y-71120000D03*
-D14*
-X14750000Y-20820000D03*
-X21250000Y-20820000D03*
-X14750000Y-25320000D03*
-X21250000Y-25320000D03*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-F_Paste.gtp

@@ -1,173 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*
-G04 #@! TF.CreationDate,2023-03-04T17:24:57+01:00*
-G04 #@! TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Paste,Top*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:24:57*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-G04 Aperture macros list*
-%AMRoundRect*
-0 Rectangle with rounded corners*
-0 $1 Rounding radius*
-0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
-0 Add a 4 corners polygon primitive as box body*
-4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
-0 Add four circle primitives for the rounded corners*
-1,1,$1+$1,$2,$3*
-1,1,$1+$1,$4,$5*
-1,1,$1+$1,$6,$7*
-1,1,$1+$1,$8,$9*
-0 Add four rect primitives between the rounded corners*
-20,1,$1+$1,$2,$3,$4,$5,0*
-20,1,$1+$1,$4,$5,$6,$7,0*
-20,1,$1+$1,$6,$7,$8,$9,0*
-20,1,$1+$1,$8,$9,$2,$3,0*%
-G04 Aperture macros list end*
-%ADD10C,0.150000*%
-%ADD11RoundRect,0.250000X0.350000X0.450000X-0.350000X0.450000X-0.350000X-0.450000X0.350000X-0.450000X0*%
-%ADD12RoundRect,0.250000X-0.450000X0.350000X-0.450000X-0.350000X0.450000X-0.350000X0.450000X0.350000X0*%
-%ADD13R,0.800000X1.900000*%
-%ADD14RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
-%ADD15R,1.900000X0.800000*%
-G04 APERTURE END LIST*
-D10*
-X13511904Y-49702380D02*
-X13321428Y-49702380D01*
-X13226190Y-49750000D01*
-X13178571Y-49797619D01*
-X13083333Y-49940476D01*
-X13035714Y-50130952D01*
-X13035714Y-50511904D01*
-X13083333Y-50607142D01*
-X13130952Y-50654761D01*
-X13226190Y-50702380D01*
-X13416666Y-50702380D01*
-X13511904Y-50654761D01*
-X13559523Y-50607142D01*
-X13607142Y-50511904D01*
-X13607142Y-50273809D01*
-X13559523Y-50178571D01*
-X13511904Y-50130952D01*
-X13416666Y-50083333D01*
-X13226190Y-50083333D01*
-X13130952Y-50130952D01*
-X13083333Y-50178571D01*
-X13035714Y-50273809D01*
-X14464285Y-50035714D02*
-X14464285Y-50702380D01*
-X14226190Y-49654761D02*
-X13988095Y-50369047D01*
-X14607142Y-50369047D01*
-X15369047Y-50654761D02*
-X15273809Y-50702380D01*
-X15083333Y-50702380D01*
-X14988095Y-50654761D01*
-X14940476Y-50559523D01*
-X14940476Y-50178571D01*
-X14988095Y-50083333D01*
-X15083333Y-50035714D01*
-X15273809Y-50035714D01*
-X15369047Y-50083333D01*
-X15416666Y-50178571D01*
-X15416666Y-50273809D01*
-X14940476Y-50369047D01*
-X15845238Y-50035714D02*
-X15845238Y-50702380D01*
-X15845238Y-50130952D02*
-X15892857Y-50083333D01*
-X15988095Y-50035714D01*
-X16130952Y-50035714D01*
-X16226190Y-50083333D01*
-X16273809Y-50178571D01*
-X16273809Y-50702380D01*
-X17178571Y-50035714D02*
-X17178571Y-50845238D01*
-X17130952Y-50940476D01*
-X17083333Y-50988095D01*
-X16988095Y-51035714D01*
-X16845238Y-51035714D01*
-X16750000Y-50988095D01*
-X17178571Y-50654761D02*
-X17083333Y-50702380D01*
-X16892857Y-50702380D01*
-X16797619Y-50654761D01*
-X16750000Y-50607142D01*
-X16702380Y-50511904D01*
-X16702380Y-50226190D01*
-X16750000Y-50130952D01*
-X16797619Y-50083333D01*
-X16892857Y-50035714D01*
-X17083333Y-50035714D01*
-X17178571Y-50083333D01*
-X17654761Y-50607142D02*
-X17702380Y-50654761D01*
-X17654761Y-50702380D01*
-X17607142Y-50654761D01*
-X17654761Y-50607142D01*
-X17654761Y-50702380D01*
-X18559523Y-50702380D02*
-X18559523Y-49702380D01*
-X18559523Y-50654761D02*
-X18464285Y-50702380D01*
-X18273809Y-50702380D01*
-X18178571Y-50654761D01*
-X18130952Y-50607142D01*
-X18083333Y-50511904D01*
-X18083333Y-50226190D01*
-X18130952Y-50130952D01*
-X18178571Y-50083333D01*
-X18273809Y-50035714D01*
-X18464285Y-50035714D01*
-X18559523Y-50083333D01*
-X19416666Y-50654761D02*
-X19321428Y-50702380D01*
-X19130952Y-50702380D01*
-X19035714Y-50654761D01*
-X18988095Y-50559523D01*
-X18988095Y-50178571D01*
-X19035714Y-50083333D01*
-X19130952Y-50035714D01*
-X19321428Y-50035714D01*
-X19416666Y-50083333D01*
-X19464285Y-50178571D01*
-X19464285Y-50273809D01*
-X18988095Y-50369047D01*
-D11*
-X18250000Y-81120000D03*
-X16250000Y-81120000D03*
-D12*
-X6000000Y-13000000D03*
-X6000000Y-15000000D03*
-D13*
-X23380000Y-75120000D03*
-X21480000Y-75120000D03*
-X22430000Y-78120000D03*
-D12*
-X35500000Y-10000000D03*
-X35500000Y-12000000D03*
-X30500000Y-10000000D03*
-X30500000Y-12000000D03*
-X16000000Y-13000000D03*
-X16000000Y-15000000D03*
-D14*
-X21250000Y-71120000D03*
-X23250000Y-71120000D03*
-D15*
-X13400000Y-74470000D03*
-X13400000Y-76370000D03*
-X16400000Y-75420000D03*
-D12*
-X24500000Y-10000000D03*
-X24500000Y-12000000D03*
-X10750000Y-25500000D03*
-X10750000Y-27500000D03*
-D11*
-X18750000Y-71120000D03*
-X16750000Y-71120000D03*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-NPTH-drl_map.gbr

@@ -1,110 +0,0 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.11)*%
-%TF.CreationDate,2023-03-04T17:25:38+01:00*%
-%TF.ProjectId,jig2,6a696732-2e6b-4696-9361-645f70636258,rev?*%
-%TF.SameCoordinates,Original*%
-%TF.FileFunction,Drillmap*%
-%TF.FilePolarity,Positive*%
-%FSLAX45Y45*%
-G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.11)) date 2023-03-04 17:25:38*
-%MOMM*%
-%LPD*%
-G01*
-G04 APERTURE LIST*
-%ADD10C,0.100000*%
-%ADD11C,0.200000*%
-G04 APERTURE END LIST*
-D10*
-X0Y-8500000D02*
-X0Y0D01*
-X4000000Y-8500000D02*
-X0Y-8500000D01*
-X4000000Y0D02*
-X4000000Y-8500000D01*
-X0Y0D02*
-X4000000Y0D01*
-D11*
-X252619Y-8815476D02*
-X252619Y-8615476D01*
-X300238Y-8615476D01*
-X328810Y-8625000D01*
-X347857Y-8644048D01*
-X357381Y-8663095D01*
-X366905Y-8701190D01*
-X366905Y-8729762D01*
-X357381Y-8767857D01*
-X347857Y-8786905D01*
-X328810Y-8805952D01*
-X300238Y-8815476D01*
-X252619Y-8815476D01*
-X452619Y-8815476D02*
-X452619Y-8682143D01*
-X452619Y-8720238D02*
-X462143Y-8701190D01*
-X471667Y-8691667D01*
-X490714Y-8682143D01*
-X509762Y-8682143D01*
-X576429Y-8815476D02*
-X576429Y-8682143D01*
-X576429Y-8615476D02*
-X566905Y-8625000D01*
-X576429Y-8634524D01*
-X585952Y-8625000D01*
-X576429Y-8615476D01*
-X576429Y-8634524D01*
-X700238Y-8815476D02*
-X681190Y-8805952D01*
-X671667Y-8786905D01*
-X671667Y-8615476D01*
-X805000Y-8815476D02*
-X785952Y-8805952D01*
-X776428Y-8786905D01*
-X776428Y-8615476D01*
-X1033571Y-8815476D02*
-X1033571Y-8615476D01*
-X1100238Y-8758333D01*
-X1166905Y-8615476D01*
-X1166905Y-8815476D01*
-X1347857Y-8815476D02*
-X1347857Y-8710714D01*
-X1338333Y-8691667D01*
-X1319286Y-8682143D01*
-X1281190Y-8682143D01*
-X1262143Y-8691667D01*
-X1347857Y-8805952D02*
-X1328810Y-8815476D01*
-X1281190Y-8815476D01*
-X1262143Y-8805952D01*
-X1252619Y-8786905D01*
-X1252619Y-8767857D01*
-X1262143Y-8748810D01*
-X1281190Y-8739286D01*
-X1328810Y-8739286D01*
-X1347857Y-8729762D01*
-X1443095Y-8682143D02*
-X1443095Y-8882143D01*
-X1443095Y-8691667D02*
-X1462143Y-8682143D01*
-X1500238Y-8682143D01*
-X1519286Y-8691667D01*
-X1528809Y-8701190D01*
-X1538333Y-8720238D01*
-X1538333Y-8777381D01*
-X1528809Y-8796429D01*
-X1519286Y-8805952D01*
-X1500238Y-8815476D01*
-X1462143Y-8815476D01*
-X1443095Y-8805952D01*
-X1624048Y-8796429D02*
-X1633571Y-8805952D01*
-X1624048Y-8815476D01*
-X1614524Y-8805952D01*
-X1624048Y-8796429D01*
-X1624048Y-8815476D01*
-X1624048Y-8691667D02*
-X1633571Y-8701190D01*
-X1624048Y-8710714D01*
-X1614524Y-8701190D01*
-X1624048Y-8691667D01*
-X1624048Y-8710714D01*
-M02*

Hardware/2.9 Flasher by Jonas/gerber/jig2-NPTH.drl

@@ -1,13 +0,0 @@
-M48
-; DRILL file {KiCad (6.0.11)} date Sa 04 Mär 2023 17:25:31 CET
-; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2023-03-04T17:25:31+01:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,(6.0.11)
-; #@! TF.FileFunction,NonPlated,1,2,NPTH
-FMAT,2
-METRIC
-%
-G90
-G05
-T0
-M30

Hardware/2.9 Flasher by Jonas/gerber/jig2-PTH.drl

@@ -1,101 +0,0 @@
-M48
-; DRILL file {KiCad (6.0.11)} date Sa 04 Mär 2023 17:25:31 CET
-; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2023-03-04T17:25:31+01:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,(6.0.11)
-; #@! TF.FileFunction,Plated,1,2,PTH
-FMAT,2
-METRIC
-; #@! TA.AperFunction,Plated,PTH,ViaDrill
-T1C0.400
-; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T2C0.900
-; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T3C1.000
-; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T4C1.100
-%
-G90
-G05
-T1
-X7.62Y-21.62
-X11.0Y-29.75
-X11.5Y-15.0
-X14.44Y-79.31
-X20.5Y-15.25
-X20.5Y-17.0
-X21.0Y-13.75
-X23.0Y-35.5
-X24.0Y-39.7
-X26.75Y-38.25
-T2
-X23.29Y-5.08
-X25.83Y-5.08
-X28.83Y-5.08
-X31.37Y-5.08
-X34.37Y-5.08
-X36.91Y-5.08
-T3
-X7.62Y-35.56
-X7.62Y-38.1
-X7.62Y-40.64
-X7.62Y-43.18
-X7.62Y-45.72
-X7.62Y-48.26
-X7.62Y-50.8
-X7.62Y-53.34
-X7.62Y-55.88
-X7.62Y-58.42
-X7.62Y-60.96
-X7.62Y-63.5
-X7.62Y-66.04
-X7.62Y-68.58
-X7.62Y-71.12
-X7.62Y-73.66
-X7.62Y-76.2
-X7.62Y-78.74
-X7.62Y-81.28
-X28.206Y-23.005
-X28.256Y-17.005
-X28.256Y-19.005
-X28.256Y-21.005
-X30.006Y-20.005
-X30.006Y-22.005
-X31.756Y-17.005
-X31.756Y-19.005
-X31.756Y-21.005
-X31.756Y-23.005
-X32.975Y-35.57
-X32.975Y-38.11
-X32.975Y-40.65
-X32.975Y-43.19
-X32.975Y-45.73
-X32.975Y-48.27
-X32.975Y-50.81
-X32.975Y-53.35
-X32.975Y-55.89
-X32.975Y-58.43
-X32.975Y-60.97
-X32.975Y-63.51
-X32.975Y-66.05
-X32.975Y-68.59
-X32.975Y-71.13
-X32.975Y-73.67
-X32.975Y-76.21
-X32.975Y-78.75
-X32.975Y-81.29
-T4
-X2.75Y-4.766
-X2.75Y-9.266
-X9.25Y-4.766
-X9.25Y-9.266
-X12.75Y-4.766
-X12.75Y-9.266
-X14.75Y-20.82
-X14.75Y-25.32
-X19.25Y-4.766
-X19.25Y-9.266
-X21.25Y-20.82
-X21.25Y-25.32
-T0
-M30

Hardware/2.9 Flasher by Jonas/jig2.kicad_prl

@@ -1,75 +0,0 @@
-{
-  "board": {
-    "active_layer": 35,
-    "active_layer_preset": "All Layers",
-    "auto_track_width": true,
-    "hidden_nets": [],
-    "high_contrast_mode": 0,
-    "net_color_mode": 1,
-    "opacity": {
-      "pads": 1.0,
-      "tracks": 1.0,
-      "vias": 1.0,
-      "zones": 0.6
-    },
-    "ratsnest_display_mode": 0,
-    "selection_filter": {
-      "dimensions": true,
-      "footprints": true,
-      "graphics": true,
-      "keepouts": true,
-      "lockedItems": true,
-      "otherItems": true,
-      "pads": true,
-      "text": true,
-      "tracks": true,
-      "vias": true,
-      "zones": true
-    },
-    "visible_items": [
-      0,
-      1,
-      2,
-      3,
-      4,
-      5,
-      8,
-      9,
-      10,
-      11,
-      12,
-      13,
-      14,
-      15,
-      16,
-      17,
-      18,
-      19,
-      20,
-      21,
-      22,
-      23,
-      24,
-      25,
-      26,
-      27,
-      28,
-      29,
-      30,
-      32,
-      33,
-      34,
-      35,
-      36
-    ],
-    "visible_layers": "fffffff_ffffffff",
-    "zone_display_mode": 0
-  },
-  "meta": {
-    "filename": "jig2.kicad_prl",
-    "version": 3
-  },
-  "project": {
-    "files": []
-  }
-}

Hardware/2.9 Flasher by Jonas/jig2.kicad_pro

@@ -1,440 +0,0 @@
-{
-  "board": {
-    "design_settings": {
-      "defaults": {
-        "board_outline_line_width": 0.09999999999999999,
-        "copper_line_width": 0.19999999999999998,
-        "copper_text_italic": false,
-        "copper_text_size_h": 1.5,
-        "copper_text_size_v": 1.5,
-        "copper_text_thickness": 0.3,
-        "copper_text_upright": false,
-        "courtyard_line_width": 0.049999999999999996,
-        "dimension_precision": 4,
-        "dimension_units": 3,
-        "dimensions": {
-          "arrow_length": 1270000,
-          "extension_offset": 500000,
-          "keep_text_aligned": true,
-          "suppress_zeroes": false,
-          "text_position": 0,
-          "units_format": 1
-        },
-        "fab_line_width": 0.09999999999999999,
-        "fab_text_italic": false,
-        "fab_text_size_h": 1.0,
-        "fab_text_size_v": 1.0,
-        "fab_text_thickness": 0.15,
-        "fab_text_upright": false,
-        "other_line_width": 0.15,
-        "other_text_italic": false,
-        "other_text_size_h": 1.0,
-        "other_text_size_v": 1.0,
-        "other_text_thickness": 0.15,
-        "other_text_upright": false,
-        "pads": {
-          "drill": 0.762,
-          "height": 1.524,
-          "width": 1.524
-        },
-        "silk_line_width": 0.15,
-        "silk_text_italic": false,
-        "silk_text_size_h": 1.0,
-        "silk_text_size_v": 1.0,
-        "silk_text_thickness": 0.15,
-        "silk_text_upright": false,
-        "zones": {
-          "45_degree_only": false,
-          "min_clearance": 0.508
-        }
-      },
-      "diff_pair_dimensions": [
-        {
-          "gap": 0.0,
-          "via_gap": 0.0,
-          "width": 0.0
-        }
-      ],
-      "drc_exclusions": [],
-      "meta": {
-        "version": 2
-      },
-      "rule_severities": {
-        "annular_width": "error",
-        "clearance": "error",
-        "copper_edge_clearance": "error",
-        "courtyards_overlap": "error",
-        "diff_pair_gap_out_of_range": "error",
-        "diff_pair_uncoupled_length_too_long": "error",
-        "drill_out_of_range": "error",
-        "duplicate_footprints": "warning",
-        "extra_footprint": "warning",
-        "footprint_type_mismatch": "error",
-        "hole_clearance": "error",
-        "hole_near_hole": "error",
-        "invalid_outline": "error",
-        "item_on_disabled_layer": "error",
-        "items_not_allowed": "error",
-        "length_out_of_range": "error",
-        "malformed_courtyard": "error",
-        "microvia_drill_out_of_range": "error",
-        "missing_courtyard": "ignore",
-        "missing_footprint": "warning",
-        "net_conflict": "warning",
-        "npth_inside_courtyard": "ignore",
-        "padstack": "error",
-        "pth_inside_courtyard": "ignore",
-        "shorting_items": "error",
-        "silk_over_copper": "warning",
-        "silk_overlap": "warning",
-        "skew_out_of_range": "error",
-        "through_hole_pad_without_hole": "error",
-        "too_many_vias": "error",
-        "track_dangling": "warning",
-        "track_width": "error",
-        "tracks_crossing": "error",
-        "unconnected_items": "error",
-        "unresolved_variable": "error",
-        "via_dangling": "warning",
-        "zone_has_empty_net": "error",
-        "zones_intersect": "error"
-      },
-      "rules": {
-        "allow_blind_buried_vias": false,
-        "allow_microvias": false,
-        "max_error": 0.005,
-        "min_clearance": 0.0,
-        "min_copper_edge_clearance": 0.0,
-        "min_hole_clearance": 0.25,
-        "min_hole_to_hole": 0.25,
-        "min_microvia_diameter": 0.19999999999999998,
-        "min_microvia_drill": 0.09999999999999999,
-        "min_silk_clearance": 0.0,
-        "min_through_hole_diameter": 0.3,
-        "min_track_width": 0.19999999999999998,
-        "min_via_annular_width": 0.049999999999999996,
-        "min_via_diameter": 0.39999999999999997,
-        "solder_mask_clearance": 0.0,
-        "solder_mask_min_width": 0.0,
-        "use_height_for_length_calcs": true
-      },
-      "track_widths": [
-        0.0,
-        0.5,
-        1.0,
-        2.0
-      ],
-      "via_dimensions": [
-        {
-          "diameter": 0.0,
-          "drill": 0.0
-        },
-        {
-          "diameter": 0.6,
-          "drill": 0.4
-        }
-      ],
-      "zones_allow_external_fillets": false,
-      "zones_use_no_outline": true
-    },
-    "layer_presets": []
-  },
-  "boards": [],
-  "cvpcb": {
-    "equivalence_files": []
-  },
-  "erc": {
-    "erc_exclusions": [],
-    "meta": {
-      "version": 0
-    },
-    "pin_map": [
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        2,
-        0,
-        1,
-        0,
-        0,
-        1,
-        0,
-        2,
-        2,
-        2,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        1,
-        0,
-        1,
-        0,
-        1,
-        2
-      ],
-      [
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        1,
-        1,
-        2,
-        1,
-        1,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        1,
-        1,
-        1,
-        1,
-        1,
-        0,
-        1,
-        1,
-        1,
-        1,
-        1,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        1,
-        0,
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        2,
-        1,
-        2,
-        0,
-        0,
-        1,
-        0,
-        2,
-        2,
-        2,
-        2
-      ],
-      [
-        0,
-        2,
-        0,
-        1,
-        0,
-        0,
-        1,
-        0,
-        2,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        2,
-        1,
-        1,
-        0,
-        0,
-        1,
-        0,
-        2,
-        0,
-        0,
-        2
-      ],
-      [
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2
-      ]
-    ],
-    "rule_severities": {
-      "bus_definition_conflict": "error",
-      "bus_entry_needed": "error",
-      "bus_label_syntax": "error",
-      "bus_to_bus_conflict": "error",
-      "bus_to_net_conflict": "error",
-      "different_unit_footprint": "error",
-      "different_unit_net": "error",
-      "duplicate_reference": "error",
-      "duplicate_sheet_names": "error",
-      "extra_units": "error",
-      "global_label_dangling": "warning",
-      "hier_label_mismatch": "error",
-      "label_dangling": "error",
-      "lib_symbol_issues": "warning",
-      "multiple_net_names": "warning",
-      "net_not_bus_member": "warning",
-      "no_connect_connected": "warning",
-      "no_connect_dangling": "warning",
-      "pin_not_connected": "error",
-      "pin_not_driven": "error",
-      "pin_to_pin": "warning",
-      "power_pin_not_driven": "error",
-      "similar_labels": "warning",
-      "unannotated": "error",
-      "unit_value_mismatch": "error",
-      "unresolved_variable": "error",
-      "wire_dangling": "error"
-    }
-  },
-  "libraries": {
-    "pinned_footprint_libs": [],
-    "pinned_symbol_libs": []
-  },
-  "meta": {
-    "filename": "jig2.kicad_pro",
-    "version": 1
-  },
-  "net_settings": {
-    "classes": [
-      {
-        "bus_width": 12.0,
-        "clearance": 0.2,
-        "diff_pair_gap": 0.25,
-        "diff_pair_via_gap": 0.25,
-        "diff_pair_width": 0.2,
-        "line_style": 0,
-        "microvia_diameter": 0.3,
-        "microvia_drill": 0.1,
-        "name": "Default",
-        "pcb_color": "rgba(0, 0, 0, 0.000)",
-        "schematic_color": "rgba(0, 0, 0, 0.000)",
-        "track_width": 0.25,
-        "via_diameter": 0.8,
-        "via_drill": 0.4,
-        "wire_width": 6.0
-      }
-    ],
-    "meta": {
-      "version": 2
-    },
-    "net_colors": null
-  },
-  "pcbnew": {
-    "last_paths": {
-      "gencad": "",
-      "idf": "",
-      "netlist": "",
-      "specctra_dsn": "",
-      "step": "",
-      "vrml": ""
-    },
-    "page_layout_descr_file": ""
-  },
-  "schematic": {
-    "annotate_start_num": 0,
-    "drawing": {
-      "default_line_thickness": 6.0,
-      "default_text_size": 50.0,
-      "field_names": [],
-      "intersheets_ref_own_page": false,
-      "intersheets_ref_prefix": "",
-      "intersheets_ref_short": false,
-      "intersheets_ref_show": false,
-      "intersheets_ref_suffix": "",
-      "junction_size_choice": 3,
-      "label_size_ratio": 0.375,
-      "pin_symbol_size": 25.0,
-      "text_offset_ratio": 0.15
-    },
-    "legacy_lib_dir": "",
-    "legacy_lib_list": [],
-    "meta": {
-      "version": 1
-    },
-    "net_format_name": "",
-    "ngspice": {
-      "fix_include_paths": true,
-      "fix_passive_vals": false,
-      "meta": {
-        "version": 0
-      },
-      "model_mode": 0,
-      "workbook_filename": ""
-    },
-    "page_layout_descr_file": "",
-    "plot_directory": "",
-    "spice_adjust_passive_values": false,
-    "spice_external_command": "spice \"%I\"",
-    "subpart_first_id": 65,
-    "subpart_id_separator": 0
-  },
-  "sheets": [
-    [
-      "43d4e830-ba5e-48ae-bdc0-06fa39a1ff51",
-      ""
-    ]
-  ],
-  "text_variables": {}
-}

Hardware/2.9 Flasher by Jonas/sym-lib-table

@@ -1,3 +0,0 @@
-(sym_lib_table
-  (lib (name "ESLCONN")(type "KiCad")(uri "${KIPRJMOD}/ESLCONN.kicad_sym")(options "")(descr ""))
-)

Hardware/2.9-1.54 Flasher by ATC1441/README.md

@@ -1,15 +0,0 @@
-# 3D-printed programming jig
-
-## Jig from [ATC1441](https://github.com/atc1441)
-
-### Version: ZBS243_Pogo_Flasher
-
-<img width="600" alt="atc1441_jig1" src="atc1441_jig1.jpg">
-
-<img width="600" alt="atc1441_jig2" src="atc1441_jig2.jpg">
-
-- The Jig is printed in 3 parts, and uses the 1.5mm Pogo Pins like P100-H2
-- The Screws to connect the main and bottom body together need to be screwed in quite hard  anything from 1-3mm should work
-- The body and screws are designed for the ESP32 Lolin32 Lite board
-
-#### Also available [on Tinkercad](https://www.tinkercad.com/things/37yG0A1sEFw?sharecode=woPw-7fiiAaOwkRt-xzJYHstxwA_3Xcl5dmdgnPgwAw)

Hardware/2.9-1.54 NanoAP by ATC1441/README.md

@@ -1,23 +0,0 @@
-# 3D-printed ESP32-S2 Mini NanoAP with Flex PCB 
-
-## NanoAP by [ATC1441](https://github.com/atc1441)
-
-The NanoAP is build by using an 1.54" Display with an ZBS243 SoC and an ESP32 S2-Mini Dev-board(2MB SRAM Version)
-The Flex PCB does also fit on the 2.9" Display, the case will not fit then :D
-
-<img width="600" alt="NanoAP_Case" src="NanoAP_Case.jpg">
-
-<img width="600" alt="NanoAP_PCB_soldered" src="NanoAP_PCB_soldered.jpg">
-
-<img width="600" alt="NanoAP_Flapped" src="NanoAP_Flapped.jpg">
-
-
-Video manual:
-https://youtu.be/8oQdo9bJ7Rk
-
-[![YoutubeVideo](https://img.youtube.com/vi/8oQdo9bJ7Rk/0.jpg)](https://www.youtube.com/watch?v=8oQdo9bJ7Rk)
-
-
-- The "NanoAP_Case_V4.stl" Case is printed in one go standing up, 0.2mm Layer height no support, infill 20%
-- The Flex PCB can be ordered via the Gerber File "NanoAP_Gerber.rar"
-- The Antenna from the Original case needs to be replaced by either a ~3cm wire or the "Antenna_FlexPCB_Gerber.rar"

Hardware/3D-Printed/readme.md

@@ -1,38 +0,0 @@
-**A few accessories from the 3D printer**
-
-**HOLDER & STANDS**
-
-There are holder and stands for every tag. 1.54", 2.9" and 4.2". 
-
-![image](https://github.com/slimline33/OpenEPaperLink/assets/3323812/836875fd-7a5f-4a14-8cbe-e83381784879)
-
-![image](2-9_Solum_shelf_holder_2cm.jpg)
-
-
-
-**4.2 mini stand v2 by Nic.stl**
-4.2" mini stand by Nic. Note that these are designed with tight tolerances, to be printed on a resin printer. If you print it using your desktop 3D-printer, it might not fit.
-
-![image](4.2_mini_stand_v2.jpeg)
-
-
-**4x 1.54" By Pål Hamre**
-File: 4x154_holder_by_Pal_Hamre.stl
-
-![image](4_154_Image_1.jpg)
-
-![image](4_154_Image_2.jpg)
-
-![image](4_154_Image_3.jpg)
-
-**Chroma74 Debug JIG**
-
-File: chroma74_debug_jig.STL (fix the pogo pins with a little bit of superglue)
-
-![image](https://github.com/jjwbruijn/OpenEPaperLink/assets/3323812/ef7440f0-40ee-4c0a-a836-0d9541d15922)
-
-![IMG_20240505_183120](https://github.com/jjwbruijn/OpenEPaperLink/assets/3323812/011ad966-8451-467c-8414-8e56c88aa121)
-
-![IMG_20240505_183051](https://github.com/jjwbruijn/OpenEPaperLink/assets/3323812/ad00f712-82e8-4d05-87c2-a5bd54a60eb9)
-
-![IMG_20240505_204601](https://github.com/jjwbruijn/OpenEPaperLink/assets/3323812/2d31e730-5b10-458a-941c-198eab711e1d)

Hardware/4.2-2.9-1.54 Flasher by Jelmer/README.md

@@ -1,15 +0,0 @@
-# 3D-printed programming jig (old style, no PCB required)
-
-### Version: jig-16, jig-29 and jig-42
-
-<img width="600" alt="jig1" src="jig1.jpg">
-
-<img width="600" alt="jig2" src="jig2.jpg">
-
-<img width="600" alt="jig4" src="jig3.jpg">
-
-<img width="600" alt="jig4" src="jig4.jpg">
-
-- This design uses 1mm pogo pins to connect to the pins on the 4.2"/2.9"/1.6" Solum ESL's. My printer doesn't have the resolution to properly do the 1mm holes in the smaller rectangle, so I use a soldering iron to coax the pins through the plastic. A 1mm drill works nicely too. Whatever works for you.
-- Use small screws or some compatible glue to attach the latch to the side of the cradle
-- I used hot glue to attach an arduino nano to the underside next to the exposed pogo pins. An ESP32 can also be used and has more memory to provide more features in the future, but I didn't want to waste one on this

Hardware/9.7 Case by Viktor Knall/README.md

@@ -1,3 +0,0 @@
-## 9.7" Case by Viktor Knall ##
-
-![image](Cas97_By_Viktor.jpg)