starred/OpenEPaperLink
1
0
Fork 0
mirror of https://github.com/OpenEPaperLink/OpenEPaperLink.git synced 2026-03-21 00:04:28 +01:00
Code Issues 472 Packages Projects Releases 10 Wiki Activity
Page: LilyGo T‐Panel AP
Pages
1.3” EL013H2WRD Peghook 1.54″ HS‐154R‐N 13.3″ EL133C2WRN 2.1″ Chroma‐21 2.2″ BWRY EL022F6W4A 2.2″ EL022H3WRA 2.6″ BWRY Newton Pro EL026F6W4A 2.7″ ST‐GR27000 2.9″ Chroma 29 2.9″ EL029D2WRA SubGHz 2.9″ EL029GSWRN 2.9″ EL029H3WRA 2.9″ ST‐GM29MT1 2.9″ TG‐GM29MT1C ST‐GM29MTF 4.2″ Chroma 42 4.2″ ST‐GR42 4.2″ TG‐GR42 4inch AP 7.4″ ST GM7500N 7.5″ ST‐GR750BN 88MZ100 Changelog 88MZ100 Programming and interfacing Access point pinouts Adding an SD card BLE only AP Beginners Guide for an easy to build Access Point (aka spaghetti AP) Binary file nomenclature Build AP firmware CC1310 Based Chroma Tags Chroma 74 Chroma 74H Chroma Aeon 74 Chroma Series SubGhz Tags Content cards Default settings for new Tags ESP32‐PoE‐ISO_AP Firmware Updates Flashing SiLabs based M3 Newton Displays Generic CC1101 modules for SubGhz Google Apps Scripts Home ICS calendar Installing SubGhz Beta Led control LilyGo T‐Panel AP Lithium Ion replacement for CR2450 M2 NFC 2.9″ and 1.54″ M2 Tag Firmware changelog M3 Tag Firmware changelog Nano AP V2 Opticon 2.1″ BWRY EE‐214RY Opticon 2.9″ BWRY EE‐293RY Opticon 4.2″ BWR EE‐420R Opticon 7.5″ BWR EE‐750R Opticon CC2533‐based tags Picture Frame for 7.4" Price tags RF protocol Restoring Lost Serial Numbers in Chroma Tags SubGhz AP Configuration SubGhz support for the LilyGo T‐Panel Tag protocol timing Troubleshooting usage Uploading & Using Custom Fonts, with examples Using your own fork with OTA updates Yellow AP with EByte CC1101 module rf‐wake tagtype notes
Clone
LilyGo T‐Panel AP
Skip Hansen edited this page 2025-01-20 15:34:18 -08:00
Table of Contents

The LilyGo T-Panel S3 is a standard off the shelf product from Lilygo which can be used as an OEPL AP without modifications with 802.15.4 and Bluetooth based tags.

Important

The "Lite" version of the T-Panel can not be used as an OEPL AP since it lacks a ESP32-H2 processor.

Installing OpenEPaperLink AP firmware on the LilyGo T-Panel

Step 1: Connect the T-Panel's S3 USB port to PC.

Step 2: Force the S3 into programming mode.

LILYGO-T-Panel_s3

Step 3: Goto https://install.openepaperlink.de/ and select the T-Panel AP.

select-t-panel

Step 4:. Click connect

click_connect

Step 5: Select the COM port corresponding to the T-Panel and click Connect.

click_connect1

Step 6: Click "INSTALL OPENEPAPERLINK"

install_oepl

Step 7: Confirm the installation.

confirm_install

After a few minutes firmware installation on the S3 should complete successfully.

install_complete

Now we need to install the OpenEPaperLink RF coprocessor firmware on the H2.

Step 8: Connect the T-Panel's H2 USB port to PC.

Step 9: Force the S3 into programming mode.

Since the OpenEPaperLink S3 firmware will periodically reset the H2 if it isn't communicating as expected we need to force the S3 into programming mode again to prevent it from interferring with flashing the H2 (see step 2 above).

  1. Force the H2 into programming mode.

LILYGO-T-Panel_h2

  1. Flash the H2.

Follow steps 3 though 7 above again. This time flashing the firmware should be much quicker.

  1. Power cycle the T-panel and you are finished!

You should end up with S3 version 2.75 or later and H2 version 001f or later. If this is not the case head continue here to update.

See ticket #420 for more information.

SubGhz support

If you are interested in supporting SubGhz Tags with your new AP see SubGhz-support-for-the-LilyGo-T-Panel.